Notebook HDD load cycle count

Archived topics about LMDE 1
Forum rules
Darvon
Level 1
Level 1
Posts: 13
Joined: Tue Dec 13, 2011 4:26 pm

Notebook HDD load cycle count

Postby Darvon » Wed May 16, 2012 7:32 am

Hi!

I have LMDE 64 bit on my Thinkpad L520. GSmartControl says, my HDD is a Seagate Momentus 7200.4. I hear some quiet, but noticable clicking every 10-20 seconds or so from my HDD, and I remembered, that there was a problem with that in Ubuntu some years ago. So I've installed smartctl. I went to a terminal:

Code: Select all

smartctl -A /dev/sda | grep -E "(Load_Cycle_Count|ID)"
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       2289

(I found this command on an ubuntu wiki-page)

About one and a half hours later, the same command shows:

Code: Select all

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       2385

So there are about 100 accesses in 90 minutes. I guess that's too much. My question is, will my drive brake after a few months, if I let this happen all the time? What can I do? Can I use the solutions for Ubuntu on LMDE? I've also found one for squeeze, http://easytofu.com/23062011215944-debi ... cle-counts , but it warns to step back if someone doesn't know what all that means what they advice - and I don't really know.

Darvon
Level 1
Level 1
Posts: 13
Joined: Tue Dec 13, 2011 4:26 pm

Re: Notebook HDD load cycle count

Postby Darvon » Sun May 20, 2012 3:51 pm

I've had Mint 12 installed before LMDE, and there I didn't notice the noise from the HDD, and since I've used my notebook for months now, the actual cycle count would be higher, if this bug happened back then. Any ideas why?

Darvon
Level 1
Level 1
Posts: 13
Joined: Tue Dec 13, 2011 4:26 pm

Re: Notebook HDD load cycle count

Postby Darvon » Mon May 28, 2012 3:09 pm

How did Mint 12 handle this?

User avatar
darethehair
Level 3
Level 3
Posts: 199
Joined: Sun Mar 08, 2009 2:22 pm
Location: Morden Manitoba Canada
Contact:

Re: Notebook HDD load cycle count

Postby darethehair » Tue May 29, 2012 9:22 am

In the past few months when I became aware (and started to panic) over 'load_cycle_count' on my Western Digital 'green' hard drives in my Linux boxes, I ultimately found and used a very simple utility, which I assume made a difference to the rate of that statistic. For example:

Code: Select all

sudo idle3ctl -s255 /dev/sda


I am not the best one to explain the cautions and risks involved, but over time I ended up seeing pages like this:

http://idle3-tools.sourceforge.net/

Before stumbling across this easy Linux utility, the best advise I was finding was to go through the hassle of creating a bootable CD containing a Windows 'wdidle3.exe' utility, which a lot of people had successfully used. It took a bit of trust on my part to use the Linux 'idle3ctl' instead, but I have had no problems -- and was much easier to use!

Is this what you were looking for?

EDIT: Sorry, I think these utilities are JUST for Western Digital drives. I did not know that this problem existed on any other brand.
There is nothing more dangerous than a bored cat.


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 0 guests