Atheros 9170 won't work after Kernel update

Archived topics about LMDE 1
Forum rules
foxhunter
Level 1
Level 1
Posts: 3
Joined: Tue Jan 10, 2012 4:20 pm

Atheros 9170 won't work after Kernel update

Postby foxhunter » Tue Jan 10, 2012 4:30 pm

Hi all,

i'm using the Debian version of Linux Mint 12. Installation went fine,

I am having two wireless cards in my HP laptop. The internal one is a BCM43sx device, which is usually not in use.
The other one is an Atheros 9170 USB Stick. I've switched to this, because the BCM doesn't support 802.11n which is necessary for my broadband connection.
With the default installation the stick is working fine. But after an update and reboot to Kernel 3.0.x, the Adapter stopped working.
There is no trace about it's existence in iwconfig or network-manager. The only information is coming from lsusb:

Code: Select all

Bus 001 Device 004: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170]


I'm currently running Kernel 2.6.39 to get the Atheros stick working.

Any ideas?

Greetings

User avatar
DrHu
Level 17
Level 17
Posts: 7560
Joined: Wed Jun 17, 2009 8:20 pm

Re: Atheros 9170 won't work after Kernel update

Postby DrHu » Tue Jan 10, 2012 5:02 pm


microwave
Level 1
Level 1
Posts: 2
Joined: Tue Jan 10, 2012 5:06 pm

Re: Atheros 9170 won't work after Kernel update

Postby microwave » Tue Jan 10, 2012 5:10 pm

ar9170usb is no longer used as of Kernel 3.0. You need to replace it with carl9170.

Grab the firmware from here:http://wireless.kernel.org/en/users/Drivers/carl9170/fw1.9.2?action=AttachFile&do=get&target=carl9170-1.fw

Place it in /usr/lib/firmware

Blacklist ar9170usb

Code: Select all

echo "ar9170usb" > /etc/modprobe.d/blacklist.conf


remove ar9170usb module

Code: Select all

modprobe -rv ar9170usb
depmod -a
modprobe -v carl9170
Last edited by microwave on Tue Jan 10, 2012 5:16 pm, edited 1 time in total.

foxhunter
Level 1
Level 1
Posts: 3
Joined: Tue Jan 10, 2012 4:20 pm

Re: Atheros 9170 won't work after Kernel update

Postby foxhunter » Tue Jan 10, 2012 5:14 pm

DrHu wrote:http://forums.linuxmint.com/search.php?st=0&sk=t&sd=d&sr=posts&keywords=atheros+mint+12

Thanks for that useless posting. I've used the board search.

ar9170usb is no longer used as of Kernel 3.0. You need to replace it with carl9170.
Thanks, but how has it to be done? I've used Linux a couple of years before but i did not have to change drivers so far.

microwave
Level 1
Level 1
Posts: 2
Joined: Tue Jan 10, 2012 5:06 pm

Re: Atheros 9170 won't work after Kernel update

Postby microwave » Tue Jan 10, 2012 5:16 pm

See original post

foxhunter
Level 1
Level 1
Posts: 3
Joined: Tue Jan 10, 2012 4:20 pm

Re: Atheros 9170 won't work after Kernel update

Postby foxhunter » Tue Jan 10, 2012 5:25 pm

Ah, you've updated it ;)

Thanks, will give it a try


Return to “Archive”

Who is online

Users browsing this forum: No registered users and 2 guests