I appreciate that very much.
Sorry about confusion, I thought router could only add one reservation.
Added 192.168.0.116 successfully, but still no name for lmde10.
Firewall was disabled all the time, you told me to do that earlier in the thread.
Installed nmap and all necessary ports are open.
Here is output:
Code: Select all
ckosloff@lmde10 ~ $ sudo nmap -sS -sU -T4 192.168.0.116
Starting Nmap 5.00 ( http://nmap.org ) at 2011-03-22 22:44 EDT
Interesting ports on 192.168.0.116:
Not shown: 1990 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
139/tcp open netbios-ssn
445/tcp open microsoft-ds
68/udp open|filtered dhcpc
111/udp open|filtered rpcbind
137/udp open|filtered netbios-ns
138/udp open|filtered netbios-dgm
631/udp open|filtered ipp
5353/udp open|filtered zeroconf
Nmap done: 1 IP address (1 host up) scanned in 1.59 seconds
Regarding the computer with main edition (Julia-Pavilion), after disabling firewall it did show smbtree, correct workgroup, and (finally!) LMDE10 (in caps) lmde10 server.
With following error:
cli_start_connection: failed to connect to LMDE10<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL.
Eagerly awaiting further instructions.