This is my first time using Linux and I have installed Linux Mint Debian [AMD 64 Bit Edition] onto my machine, with a Dual-Boot with Windows 7. I have completed the installation and dual-boot setup without a problem.
Now that I am in Linux Mint, I have two main issues that I can't work out how to resolve. They are:
1. I have dual monitors, but only the Primary monitor will display.
2. I have a Raid 5 array on the machine, and it is not recognised.
Details of my machine are as follows:
System: Host Testing Kernel 3.2.0-2-amd64 x86_64 (64 bit) Distro Linux Mint Debian Edition
CPU: Quad core Intel Core2 Quad Q9550 (-MCP-) cache 6144 KB
Clock Speeds: (1) 2000.00 MHz (2) 2000.00 MHz (3) 2000.00 MHz (4) 2000.00 MHz
Graphics: Card nVidia G94 [GeForce 9600 GT] X.Org 1.11.4 Res: email@example.com, firstname.lastname@example.org
GLX Renderer Gallium 0.4 on NV94 GLX Version 1.4 (2.1 Mesa 7.11.2) Direct Rendering No
Audio: Card Intel 82801JI (ICH10 Family) HD Audio Controller driver snd_hda_intel BusID: 00:1b.0
Sound: Advanced Linux Sound Architecture Version 1.0.24
Network: Card-1 Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169 v: 2.3LK-NAPI at port b000 BusID: 03:00.0
Card-2 Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver r8169 v: 2.3LK-NAPI at port c000 BusID: 04:00.0
Disks: HDD Total Size: 5601.1GB (35.1% used)
1: /dev/sda WDC_WD3000HLFS 300.1GB
2: /dev/sdb WDC_WD3000HLFS 300.1GB
3: /dev/sdc WDC_WD1001FALS 1000.2GB
4: /dev/sdd WDC_WD1001FALS 1000.2GB
5: /dev/sdj WDC_WD1001FALS 1000.2GB
Partition: ID:/ size: 49G used: 5.2G (12%) fs: rootfs ID:/ size: 49G used: 5.2G (12%) fs: ext4
ID:/boot size: 998M used: 50M (6%) fs: ext4 ID:/home size: 33G used: 750M (3%) fs: ext4
ID:swap-1 size: 16.78GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 47.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes 158 Uptime 2:01 Memory 521.8/8004.8MB Runlevel 2 Client Shell inxi 1.4.23
From the above, disks 3, 4 & 5 are in a Raid 5 array controlled by the motherboard.
Can someone please give me some guidance on how to bring up the dual screens, and to be able to access the RAID 5 disk array.