Code: Select all
System: Host: steven-GL753VE Kernel: 4.15.0-33-generic x86_64 bits: 64 gcc: 7.3.0
Desktop: Cinnamon 3.8.8 (Gtk 3.22.30) Distro: Linux Mint 19 Tara
Machine: Device: laptop System: ASUSTeK product: GL753VE v: 1.0 serial: N/A
Mobo: ASUSTeK model: GL753VE v: 1.0 serial: N/A
UEFI: American Megatrends v: GL753VE.306 date: 01/02/2018
Battery BAT0: charge: 41.7 Wh 97.8% condition: 42.6/48.2 Wh (88%)
model: Simplo SDI ICR18650 status: N/A
CPU: Quad core Intel Core i7-7700HQ (-MT-MCP-) arch: Skylake rev.9 cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 22464
clock speeds: max: 3800 MHz 1: 985 MHz 2: 982 MHz 3: 995 MHz 4: 999 MHz 5: 999 MHz
6: 996 MHz 7: 985 MHz 8: 986 MHz
Graphics: Card-1: Intel Device 591b bus-ID: 00:02.0
Card-2: NVIDIA GP107M [GeForce GTX 1050 Ti Mobile] bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.6 )
drivers: modesetting,nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1920x1080@60.02hz
OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2
version: 4.6.0 NVIDIA 396.54 Direct Render: Yes
Audio: Card Intel CM238 HD Audio Controller driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k4.15.0-33-generic
Network: Card-1: Intel Wireless 7265 driver: iwlwifi bus-ID: 02:00.0
IF: wlp2s0 state: up mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 03:00.0
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1128.2GB (57.1% used)
ID-1: /dev/sda model: SanDisk_SD8SN8U1 size: 128.0GB
ID-2: /dev/sdb model: TOSHIBA_MQ01ABD1 size: 1000.2GB
Partition: ID-1: / size: 214G used: 90G (45%) fs: ext4 dev: /dev/sdb2
ID-2: swap-1 size: 16.10GB used: 0.00GB (0%) fs: swap dev: /dev/sdb3
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 60.5C mobo: N/A gpu: 0.0:51C
Fan Speeds (in rpm): cpu: 0
Info: Processes: 284 Uptime: 7 min Memory: 1819.9/15925.4MB
Init: systemd runlevel: 5 Gcc sys: 7.3.0 Client: Shell (bash 4.4.191) inxi: 2.3.56
So, onto the actual issues.
1. Settings not actually changing anything
So, my power settings in the cinnamon menu don't appear to actually have any effects. When I go to Settings > Power Management > Lid Closed > Off, nothing changes. It still locks me out when I close the lid and I need to re-enter my password. Besides a minor inconvenience, this leads into my second (and much more dangerous) issue.
2. Lag when Idle
So, I am not on my PC 24/7, but I also do not like to have it turned off, since I have Linux Mint installed on /dev/sdb, which is a HDD, leading to slow boot times. The issue is, if the PC is idle for a significant amount of time, then Cinnamon appears to lag for a minute or two, apps lag behind, they open slower, the desktop is slow as molasses in general. Unlike normal, when everything is fast and responsive. This, coupled with the lock screen issue, is deadly, since when the lid is closed for a long time... it completely freezes, forcing me to open a tty and reboot. Is there a fix to either, but ideally both of these issues?
Thank you for reading, and if I need to provide any more info, I would be happy to.