Lock screen UI freezes in Cinnamon 19.1

Please post suggestions for improvement of Cinnamon here
https://github.com/linuxmint/Cinnamon
aclaim
Level 1
Level 1
Posts: 1
Joined: Wed Sep 04, 2019 3:13 pm

Re: Lock screen UI freezes in Cinnamon 19.1

Post by aclaim » Wed Sep 04, 2019 3:17 pm

I have the same problem. It has appeared after update to 19.2, before that I didn't notice the same behavear.

Code: Select all

System:    Host: lelvis Kernel: 4.15.0-58-generic x86_64 bits: 64 compiler: gcc v: 7.4.0 Desktop: Cinnamon 4.2.4 
           wm: muffin 4.2.2 dm: LightDM 1.26.0 Distro: Linux Mint 19.2 Tina base: Ubuntu 18.04 bionic 
Machine:   Type: Desktop Mobo: Intel model: NUC6i5SYB v: H81131-505 serial: <filter> UEFI: Intel 
           v: SYSKLi35.86A.0068.2018.0731.1128 date: 07/31/2018 
CPU:       Topology: Dual Core model: Intel Core i5-6260U bits: 64 type: MT MCP arch: Skylake rev: 3 L1 cache: 128 KiB 
           L2 cache: 4096 KiB L3 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 14400 
           Speed: 500 MHz min/max: 400/2900 MHz Core speeds (MHz): 1: 500 2: 500 3: 500 4: 500 
Graphics:  Device-1: Intel Iris Graphics 540 driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:1926 
           Display: server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel Iris Graphics 540 (Skylake GT3e) v: 4.5 Mesa 19.0.8 compat-v: 3.0 
           direct render: Yes 
Audio:     Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d70 
           Device-2: Microsoft LifeCam HD-3000 type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-4:3 chip ID: 045e:0779 
           Sound Server: ALSA v: k4.15.0-58-generic 
Network:   Device-1: Intel Ethernet I219-V driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:1f.6 chip ID: 8086:1570 
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0 chip ID: 8086:24f3 
           IF: wlp1s0 state: down mac: <filter> 
           IF-ID-1: docker0 state: down mac: <filter> 
           IF-ID-2: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter> 
           IF-ID-3: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter> 
Drives:    Local Storage: total: 698.65 GiB used: 88.06 GiB (12.6%) 
           ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 960 EVO 500GB size: 465.76 GiB speed: 31.6 Gb/s lanes: 4 
           serial: <filter> rev: 3B7QCXE7 scheme: GPT 
           ID-2: /dev/sda vendor: Samsung model: SSD 750 EVO 250GB size: 232.89 GiB speed: 6.0 Gb/s serial: <filter> rev: 1B6Q 
           scheme: GPT 
Partition: ID-1: / size: 152.80 GiB used: 23.13 GiB (15.1%) fs: ext4 dev: /dev/nvme0n1p3 
           ID-2: /home size: 287.37 GiB used: 64.92 GiB (22.6%) fs: ext4 dev: /dev/nvme0n1p4 
           ID-3: swap-1 size: 16.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p5 
Sensors:   System Temperatures: cpu: 53.5 C mobo: 29.8 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 279 Uptime: 3d 20h 30m Memory: 31.25 GiB used: 3.99 GiB (12.8%) Init: systemd v: 237 runlevel: 5 
           Compilers: gcc: 7.4.0 alt: 7 Shell: bash (sudo) v: 4.4.20 running in: mc inxi: 3.0.32 


vadimnad
Level 1
Level 1
Posts: 1
Joined: Sun Sep 08, 2019 9:06 am

Re: Lock screen UI freezes in Cinnamon 19.1

Post by vadimnad » Sun Sep 08, 2019 9:10 am

Same behavior on fresh Linux Mint 19.2 install. It's a pain to unlock screen. Input field is unresponsive and it takes too much time to type password characters.

Post Reply

Return to “Cinnamon”