After 20.2 upgrade, Mint will not sleep/suspend

Please post suggestions for improvement of Cinnamon on:
https://github.com/linuxmint/Cinnamon
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

Hey there Mint fam!
So I am a noob and fully accept all hazing that will probably come my way.
So I searched google/qwant/youtube and couldn't find anyone else reporting this issue.
I also searched in several places on this forum and couldn't find anyone with the same problem.

After upgrading (inside of Mint) to Uma 20.2, my system will not sleep
When I manually click "suspend" it locks the screen, but will not actually sleep/change power states.

I've reviewed my system.log after an attempt and I'm unable to see anything pointing to the cause.
I've double checked the power management settings and it's currently set to suspend after 30 minutes.
I've waited for over an hour for my computer to sleep, on it's own, and nothing happens.

I've attached the results of an inxi command and I've attached my system log.
Any help?
inxi-output.txt
(3.87 KiB) Downloaded 29 times

I'm trying to attach my system log but even after i trim it down, it says the file is too large.
I think.... I THINK... this is where the problem is.
Jul 15 21:51:50 tmint kernel: [ 9361.184638] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
Jul 15 21:52:50 tmint kernel: [ 9420.875074] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Jul 15 21:52:53 tmint kernel: [ 9423.947491] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:c8:3a:6b:24:a7:9c:08:00 SRC=192.168.0.192 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
Jul 15 21:53:05 tmint wpa_supplicant[1018]: message repeated 2 times: [ wlp7s0: Reject scan trigger since one is already pending]
Jul 15 21:54:32 tmint dbus-daemon[2127]: [session uid=1000 pid=2127] Activating service name='org.cinnamon.ScreenSaver' requested by ':1.208' (uid=1000 pid=12616 comm="/usr/bin/python3 /usr/bin/cinnamon-screensaver-com" label="unconfined")
Jul 15 21:54:32 tmint dbus-daemon[2127]: [session uid=1000 pid=2127] Successfully activated service 'org.cinnamon.ScreenSaver'
Jul 15 21:54:33 tmint org.cinnamon.ScreenSaver[12638]: #033[0;1;31mFailed to get user: User ID 1000 is not logged in or lingering#033[0m
Jul 15 21:54:33 tmint NetworkManager[986]: <info> [1626411273.1629] manager: sleep: sleep requested (sleeping: no enabled: yes)
Jul 15 21:54:33 tmint NetworkManager[986]: <info> [1626411273.1629] device (enp8s0): state change: unavailable -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
Jul 15 21:54:33 tmint cinnamon-session[2115]: WARNING: t+9303.60781s: Detected that screensaver has appeared on the bus
Jul 15 21:54:33 tmint NetworkManager[986]: <info> [1626411273.2048] device (p2p-dev-wlp7s0): state change: disconnected -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
Jul 15 21:54:33 tmint NetworkManager[986]: <info> [1626411273.2051] manager: NetworkManager state is now ASLEEP
Jul 15 21:54:33 tmint NetworkManager[986]: <info> [1626411273.2053] device (wlp7s0): state change: activated -> deactivating (reason 'sleeping', sys-iface-state: 'managed')
Jul 15 21:54:33 tmint dbus-daemon[985]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.11' (uid=0 pid=986 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 3 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
User avatar
SMG
Level 25
Level 25
Posts: 31941
Joined: Sun Jul 26, 2020 6:15 pm
Location: USA

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by SMG »

Welcome to the forum, TActually.

I recommend you upgrade your kernel. The 5.8 kernel has fixes for 3rd gen Ryzens that are not in the 5.4 kernel. You can upgrade to 5.8 or 5.11 as both options are available in Upgrade Manager. (The 5.8 kernel reaches end of life next month.)

To upgrade the kernel, open Update Manager. Select View > Linux Kernels and click Continue. Select 5.8 or 5.11 on the left panel and then click the top-most option on the right panel. An "Install" button will appear. Install the kernel and then reboot for it to become active.

Here is the inxi so others do not have to download it.

Code: Select all

System:
  Kernel: 5.4.0-77-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 
  Desktop: Cinnamon 5.0.5 info: plank wm: muffin 5.0.1 dm: LightDM 1.30.0 
  Distro: Linux Mint 20.2 Uma base: Ubuntu 20.04 focal 
Machine:
  Type: Desktop Mobo: ASRock model: B550 Pro4 serial: <filter> 
  UEFI: American Megatrends v: P1.10 date: 06/09/2020 
CPU:
  Topology: 6-Core model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 
  L2 cache: 3072 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 86234 
  Speed: 2197 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 
  1: 2195 2: 2195 3: 2196 4: 2187 5: 2195 6: 2196 7: 2195 8: 2195 9: 2192 
  10: 2195 11: 2191 12: 2194 
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: Gigabyte 
  driver: nvidia v: 460.80 bus ID: 0a:00.0 chip ID: 10de:1c82 
  Display: x11 server: X.Org 1.20.9 driver: nvidia 
  resolution: 1920x1080~60Hz, 1920x1080~60Hz 
  OpenGL: renderer: GeForce GTX 1050 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 460.80 
  direct render: Yes 
Audio:
  Device-1: NVIDIA GP107GL High Definition Audio vendor: Gigabyte 
  driver: snd_hda_intel v: kernel bus ID: 0a:00.1 chip ID: 10de:0fb9 
  Device-2: AMD Starship/Matisse HD Audio vendor: ASRock 
  driver: snd_hda_intel v: kernel bus ID: 0c:00.4 chip ID: 1022:1487 
  Device-3: ARC Camera type: USB driver: snd-usb-audio,uvcvideo 
  bus ID: 3-3.3:5 chip ID: 05a3:9331 serial: <filter> 
  Sound Server: ALSA v: k5.4.0-77-generic 
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus ID: 07:00.0 
  chip ID: 8086:2723 
  IF: wlp7s0 state: up mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASRock driver: r8169 v: kernel port: f000 bus ID: 08:00.0 
  chip ID: 10ec:8168 
  IF: enp8s0 state: down mac: <filter> 
  IF-ID-1: docker0 state: down mac: <filter> 
Drives:
  Local Storage: total: 238.47 GiB used: 242.23 GiB (101.6%) 
  ID-1: /dev/nvme0n1 vendor: Seagate model: XPG GAMMIX S11 Pro 
  size: 476.94 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 32B3T8EA 
  scheme: GPT 
  ID-2: /dev/nvme1n1 vendor: Seagate model: XPG GAMMIX S11 Pro 
  size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 42AZS6AC 
  scheme: GPT 
Partition:
  ID-1: / size: 232.28 GiB used: 88.33 GiB (38.0%) fs: ext4 dev: /dev/dm-0 
  ID-2: swap-1 size: 976.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1 
Sensors:
  System Temperatures: cpu: 50.9 C mobo: N/A gpu: nvidia temp: 43 C 
  Fan Speeds (RPM): N/A gpu: nvidia fan: 38% 
Repos:
  No active apt repos in: /etc/apt/sources.list 
  No active apt repos in: /etc/apt/sources.list.d/additional-repositories.list 
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
  1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/megasync.list 
  1: deb https://mega.nz/linux/MEGAsync/xUbuntu_20.04/ ./
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list 
  1: deb http://mirror.os6.org/linuxmint.com/packages uma main upstream import backport
  2: deb http://mirror.us-sc.kamatera.com/ubuntu focal main restricted universe multiverse
  3: deb http://mirror.us-sc.kamatera.com/ubuntu focal-updates main restricted universe multiverse
  4: deb http://mirror.us-sc.kamatera.com/ubuntu focal-backports main restricted universe multiverse
  5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
  6: deb http://archive.canonical.com/ubuntu/ focal partner
  Active apt repos in: /etc/apt/sources.list.d/windscribe-repo.list 
  1: deb https://repo.windscribe.com/ubuntu bionic main
Info:
  Processes: 362 Uptime: 3h 09m Memory: 31.29 GiB used: 2.79 GiB (8.9%) 
  Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Shell: bash 
  v: 5.0.17 running in: gnome-terminal inxi: 3.0.38
If the kernel change does not help, the next time it does not sleep, run dmesg -T | tail -n 200 in a terminal to see if the sleep command was given, but something prevented it from happening. The last number can be adjusted to give more or less information.

Also, check to make sure you are running the latest BIOS/UEFI as that can affect power states such as sleep.

As an FYI, your windscribe is listed as the LM19 repo and not the LM20 repo.
Image
A woman typing on a laptop with LM20.3 Cinnamon.
Top
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

Thanks SMG.
Also for posting my inxi...
I will figure out how to post it like that in future post (no don't tell me, I really should figure it out for myself).
will update after updating the kernel
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

So, updated to Kernel 5.11, rebooted.
My system still won't suspend/sleep.

Thanks for the other command, I did notice a ACPI failure that I am also unable to find any Mint specific references.
I did find a few references to the failure with Fedorda, but even still no one figured out what the issue was.
I'm going to try updating my bios next and I'll drop another 200 lines log after.

Code: Select all

[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: api flags index 2 larger than supported by driver
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: Found debug destination: EXTERNAL_DRAM
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: Found debug configuration: 0
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: loaded firmware version 55.d9698065.0 cc-a0-55.ucode op_mode iwlmvm
[Fri Jul 16 19:09:25 2021] Bluetooth: Core ver 2.22
[Fri Jul 16 19:09:25 2021] NET: Registered protocol family 31
[Fri Jul 16 19:09:25 2021] Bluetooth: HCI device and connection manager initialized
[Fri Jul 16 19:09:25 2021] Bluetooth: HCI socket layer initialized
[Fri Jul 16 19:09:25 2021] Bluetooth: L2CAP socket layer initialized
[Fri Jul 16 19:09:25 2021] Bluetooth: SCO socket layer initialized
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.177:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=814 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] uvcvideo: Found UVC 1.00 device HD Web Camera (05a3:9331)
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.185:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=804 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.197:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=807 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.197:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=807 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] usbcore: registered new interface driver btusb
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.205:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=811 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.209:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=815 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
[Fri Jul 16 19:09:25 2021] snd_hda_intel 0000:0a:00.1: Disabling MSI
[Fri Jul 16 19:09:25 2021] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client
[Fri Jul 16 19:09:25 2021] snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002)
[Fri Jul 16 19:09:25 2021] kvm: Nested Virtualization enabled
[Fri Jul 16 19:09:25 2021] SVM: kvm: Nested Paging enabled
[Fri Jul 16 19:09:25 2021] SVM: Virtual VMLOAD VMSAVE supported
[Fri Jul 16 19:09:25 2021] SVM: Virtual GIF supported
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.225:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=803 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.229:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=803 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.229:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=803 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 2: -32 (exp. 1).
[Fri Jul 16 19:09:25 2021] uvcvideo: Failed to query (GET_INFO) UVC control 11 on unit 2: -32 (exp. 1).
[Fri Jul 16 19:09:25 2021] input: HD Web Camera: HD Web Camera as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb3/3-3/3-3.3/3-3.3:1.0/input/input9
[Fri Jul 16 19:09:25 2021] usbcore: registered new interface driver uvcvideo
[Fri Jul 16 19:09:25 2021] USB Video Class driver (1.1.1)
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.301:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=805 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.301:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=813 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.301:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=805 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.301:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=805 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.305:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=805 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.305:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=812 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.313:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=833 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] usb 3-3.3: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
[Fri Jul 16 19:09:25 2021] usb 3-3.3: [6] FU [Mic Capture Volume] ch = 1, val = -1536/1536/1
[Fri Jul 16 19:09:25 2021] usbcore: registered new interface driver snd-usb-audio
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0: base HW address: 78:2b:46:c5:01:2a
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.377:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=810 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.377:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=810 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] thermal thermal_zone0: failed to read out thermal zone (-61)
[Fri Jul 16 19:09:25 2021] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[Fri Jul 16 19:09:25 2021] audit: type=1400 audit(1626487766.413:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=809 comm="apparmor_parser"
[Fri Jul 16 19:09:25 2021] nvidia: loading out-of-tree module taints kernel.
[Fri Jul 16 19:09:25 2021] nvidia: module license 'NVIDIA' taints kernel.
[Fri Jul 16 19:09:25 2021] Disabling lock debugging due to kernel taint
[Fri Jul 16 19:09:25 2021] MCE: In-kernel MCE decoding enabled.
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[Fri Jul 16 19:09:25 2021] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[Fri Jul 16 19:09:25 2021] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input10
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input11
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input12
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input13
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input14
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input15
[Fri Jul 16 19:09:25 2021] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input16
[Fri Jul 16 19:09:25 2021] Adding 999420k swap on /dev/mapper/vgmint-swap_1.  Priority:-2 extents:1 across:999420k SSFS
[Fri Jul 16 19:09:25 2021] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input17
[Fri Jul 16 19:09:25 2021] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input18
[Fri Jul 16 19:09:25 2021] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input19
[Fri Jul 16 19:09:25 2021] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input20
[Fri Jul 16 19:09:25 2021] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input21
[Fri Jul 16 19:09:25 2021] nvidia-nvlink: Nvlink Core is being initialized, major device number 510

[Fri Jul 16 19:09:25 2021] nvidia 0000:0a:00.0: enabling device (0002 -> 0003)
[Fri Jul 16 19:09:25 2021] nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[Fri Jul 16 19:09:25 2021] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.80  Fri May  7 06:55:54 UTC 2021
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:25 2021] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.80  Fri May  7 06:48:29 UTC 2021
[Fri Jul 16 19:09:25 2021] intel_rapl_common: Found RAPL domain package
[Fri Jul 16 19:09:25 2021] intel_rapl_common: Found RAPL domain core
[Fri Jul 16 19:09:25 2021] [drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver
[Fri Jul 16 19:09:25 2021] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0
[Fri Jul 16 19:09:25 2021] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[Fri Jul 16 19:09:25 2021] nvidia-uvm: Loaded the UVM driver, major device number 508.
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:25 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:25 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:26 2021] EDAC amd64: F17h_M70h detected (node 0).
[Fri Jul 16 19:09:26 2021] EDAC amd64: Node 0: DRAM ECC disabled.
[Fri Jul 16 19:09:28 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Fri Jul 16 19:09:28 2021] Bluetooth: BNEP filters: protocol multicast
[Fri Jul 16 19:09:28 2021] Bluetooth: BNEP socket layer initialized
[Fri Jul 16 19:09:28 2021] NET: Registered protocol family 38
[Fri Jul 16 19:09:28 2021] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[Fri Jul 16 19:09:28 2021] aufs 5.x-rcN-20210215
[Fri Jul 16 19:09:28 2021] r8169 0000:08:00.0 enp8s0: Link is Down
[Fri Jul 16 19:09:28 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:09:28 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:09:29 2021] NFSD: Using UMH upcall client tracking operations.
[Fri Jul 16 19:09:29 2021] NFSD: starting 90-second grace period (net f0000098)
[Fri Jul 16 19:09:30 2021] Bluetooth: RFCOMM TTY layer initialized
[Fri Jul 16 19:09:30 2021] Bluetooth: RFCOMM socket layer initialized
[Fri Jul 16 19:09:30 2021] Bluetooth: RFCOMM ver 1.11
[Fri Jul 16 19:09:32 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:09:32 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:09:32 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:09:32 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:09:32 2021] wlp7s0: authenticated
[Fri Jul 16 19:09:32 2021] wlp7s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:09:32 2021] wlp7s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 19:09:32 2021] wlp7s0: associated
[Fri Jul 16 19:09:32 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[Fri Jul 16 19:09:34 2021] kauditd_printk_skb: 5 callbacks suppressed
[Fri Jul 16 19:09:34 2021] audit: type=1400 audit(1626487775.557:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1653 comm="apparmor_parser"
[Fri Jul 16 19:09:34 2021] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[Fri Jul 16 19:09:34 2021] Bridge firewalling registered
[Fri Jul 16 19:09:34 2021] Initializing XFRM netlink socket
[Fri Jul 16 19:10:21 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:10:23 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=18217 PROTO=2 
[Fri Jul 16 19:11:10 2021] wlp7s0: deauthenticating from 3c:84:6a:7c:b3:be by local choice (Reason: 3=DEAUTH_LEAVING)
[Fri Jul 16 19:11:10 2021] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[Fri Jul 16 19:11:10 2021] r8169 0000:08:00.0 enp8s0: Link is Down
[Fri Jul 16 19:11:11 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:11:11 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:11:16 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:11:16 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:11:16 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:11:16 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:11:16 2021] wlp7s0: authenticated
[Fri Jul 16 19:11:16 2021] wlp7s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:11:16 2021] wlp7s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 19:11:16 2021] wlp7s0: associated
[Fri Jul 16 19:11:16 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[Fri Jul 16 19:12:26 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:14:32 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:84:ba:3b:79:f5:a3:08:00 SRC=192.168.0.179 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=31181 PROTO=2 
[Fri Jul 16 19:16:36 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:16:37 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=18945 PROTO=2 
[Fri Jul 16 19:18:41 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:18:43 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:c8:3a:6b:24:a7:9c:08:00 SRC=192.168.0.192 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:19:52 2021] wlp7s0: deauthenticating from 3c:84:6a:7c:b3:be by local choice (Reason: 3=DEAUTH_LEAVING)
[Fri Jul 16 19:19:52 2021] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[Fri Jul 16 19:19:52 2021] r8169 0000:08:00.0 enp8s0: Link is Down
[Fri Jul 16 19:19:52 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:19:52 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:19:55 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:19:55 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:19:56 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:19:56 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:19:56 2021] wlp7s0: authenticated
[Fri Jul 16 19:19:56 2021] wlp7s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:19:56 2021] wlp7s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 19:19:56 2021] wlp7s0: associated
[Fri Jul 16 19:19:56 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[Fri Jul 16 19:20:46 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:20:47 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:84:ba:3b:79:f5:a3:08:00 SRC=192.168.0.179 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6474 PROTO=2 
[Fri Jul 16 19:20:53 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=78:2b:46:c5:01:2a:3c:84:6a:7c:b3:bf:86:dd SRC=2a04:4e42:0000:0000:0000:0000:0000:0649 DST=2603:8000:0307:71a9:ba00:e55a:c4b2:ae35 LEN=1500 TC=0 HOPLIMIT=56 FLOWLBL=923758 PROTO=TCP SPT=443 DPT=42776 WINDOW=281 RES=0x00 ACK URGP=0 
[Fri Jul 16 19:21:24 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=78:2b:46:c5:01:2a:3c:84:6a:7c:b3:bf:86:dd SRC=2a04:4e42:0000:0000:0000:0000:0000:0649 DST=2603:8000:0307:71a9:ba00:e55a:c4b2:ae35 LEN=1500 TC=0 HOPLIMIT=56 FLOWLBL=841551 PROTO=TCP SPT=443 DPT=42776 WINDOW=281 RES=0x00 ACK URGP=0 
[Fri Jul 16 19:21:59 2021] wlp7s0: deauthenticating from 3c:84:6a:7c:b3:be by local choice (Reason: 3=DEAUTH_LEAVING)
[Fri Jul 16 19:21:59 2021] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[Fri Jul 16 19:21:59 2021] r8169 0000:08:00.0 enp8s0: Link is Down
[Fri Jul 16 19:21:59 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:21:59 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 19:22:02 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:22:02 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:22:02 2021] wlp7s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 19:22:02 2021] wlp7s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:22:03 2021] wlp7s0: authenticated
[Fri Jul 16 19:22:03 2021] wlp7s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 19:22:03 2021] wlp7s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 19:22:03 2021] wlp7s0: associated
[Fri Jul 16 19:22:03 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[Fri Jul 16 19:22:51 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 19:22:51 2021] [UFW BLOCK] IN=wlp7s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19692 PROTO=2
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

So... updated to latest version of the ASrock UEFI/BIos...
computer booted up after several extended minutes (whew.... I thought I bricked my computer for a sec)
But still no suspend/sleep...

here's some more sys log:

Code: Select all

[Fri Jul 16 21:12:20 2021] wlp5s0: associated
[Fri Jul 16 21:12:20 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[Fri Jul 16 21:13:00 2021] wlp5s0: deauthenticating from 3c:84:6a:7c:b3:be by local choice (Reason: 3=DEAUTH_LEAVING)
[Fri Jul 16 21:13:00 2021] Generic FE-GE Realtek PHY r8169-600:00: attached PHY driver (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[Fri Jul 16 21:13:01 2021] r8169 0000:06:00.0 enp6s0: Link is Down
[Fri Jul 16 21:13:01 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 21:13:01 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 21:13:23 2021] wlp5s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 21:13:23 2021] wlp5s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:13:23 2021] wlp5s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 21:13:23 2021] wlp5s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:13:23 2021] wlp5s0: authenticated
[Fri Jul 16 21:13:23 2021] wlp5s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:13:23 2021] wlp5s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 21:13:23 2021] wlp5s0: associated
[Fri Jul 16 21:13:23 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[Fri Jul 16 21:15:26 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:15:27 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:84:ba:3b:79:f5:a3:08:00 SRC=192.168.0.179 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13651 PROTO=2 
[Fri Jul 16 21:17:31 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:17:33 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:c8:3a:6b:24:a7:9c:08:00 SRC=192.168.0.192 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:17:33 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:6c:ad:f8:92:4d:fd:08:00 SRC=192.168.0.169 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:19:36 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:19:37 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=33496 PROTO=2 
[Fri Jul 16 21:20:56 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:20:59 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:21:41 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:21:42 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:84:ba:3b:79:f5:a3:08:00 SRC=192.168.0.179 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=20427 PROTO=2 
[Fri Jul 16 21:23:46 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:3c:84:6a:7c:b3:bf:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:23:47 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=34005 PROTO=2 
[Fri Jul 16 21:25:53 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:84:ba:3b:79:f5:a3:08:00 SRC=192.168.0.179 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54423 PROTO=2 
[Fri Jul 16 21:27:04 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:27:08 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:27:57 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:c8:e2:65:7b:84:fa:08:00 SRC=192.168.0.150 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=34482 PROTO=2 
[Fri Jul 16 21:28:53 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:28:59 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[Fri Jul 16 21:30:00 2021] wlp5s0: deauthenticating from 3c:84:6a:7c:b3:be by local choice (Reason: 3=DEAUTH_LEAVING)
[Fri Jul 16 21:30:00 2021] Generic FE-GE Realtek PHY r8169-600:00: attached PHY driver (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[Fri Jul 16 21:30:01 2021] r8169 0000:06:00.0 enp6s0: Link is Down
[Fri Jul 16 21:30:01 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 21:30:01 2021] ACPI: \: failed to evaluate _DSM (0x1001)
[Fri Jul 16 21:30:04 2021] wlp5s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 21:30:04 2021] wlp5s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:30:04 2021] wlp5s0: authenticate with 3c:84:6a:7c:b3:be
[Fri Jul 16 21:30:04 2021] wlp5s0: send auth to 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:30:04 2021] wlp5s0: authenticated
[Fri Jul 16 21:30:04 2021] wlp5s0: associate with 3c:84:6a:7c:b3:be (try 1/3)
[Fri Jul 16 21:30:04 2021] wlp5s0: RX AssocResp from 3c:84:6a:7c:b3:be (capab=0x1511 status=0 aid=4)
[Fri Jul 16 21:30:04 2021] wlp5s0: associated
[Fri Jul 16 21:30:04 2021] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[Fri Jul 16 21:30:09 2021] [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:62:d0:33:b1:35:77:08:00 SRC=192.168.0.159 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
User avatar
SMG
Level 25
Level 25
Posts: 31941
Joined: Sun Jul 26, 2020 6:15 pm
Location: USA

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by SMG »

I do not see any indication a suspend request was sent. I also do not have any ideas why LM20.2 would be different from LM20.1 unless you maybe also updated your Nvidia driver when you made the change? Some people have been running into odd issues with sleep which are related to the Nvidia driver.

Is the output you are posting from dmesg or syslog?

What happens if you run pm-suspend in a terminal? Does it suspend?
Image
A woman typing on a laptop with LM20.3 Cinnamon.
Top
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

Hi SMG,
The snippets were both from dmesg.
I did, to your point, revert from nVidia 465 driver to 460 just before performing the upgrade to Uma.
Also , running the manual suspend in the terminal yielded the same exact result as clicking suspend.

In the end, I used timeshift to revert back to 20.1 and now my computer sleeps like it should.
Coicidentally, I had some issues with the graphics driver loading and with audio on 20.2.

Maybe it was just a bad upgrade?
But in either case, I am 100% functional back on 20.1
I wouldn't call this SOLVED,but maybe Mitigated? is there a choice for that?
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
User avatar
SMG
Level 25
Level 25
Posts: 31941
Joined: Sun Jul 26, 2020 6:15 pm
Location: USA

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by SMG »

TActually wrote: ⤴Sat Jul 17, 2021 4:38 pmI did, to your point, revert from nVidia 465 driver to 460 just before performing the upgrade to Uma.
Also , running the manual suspend in the terminal yielded the same exact result as clicking suspend.

In the end, I used timeshift to revert back to 20.1 and now my computer sleeps like it should.
Since you know you have a Timeshift snapshot which works, if you want to test the theory the Nvidia driver might be a factor, you could upgrade while leaving the Nvidia driver the same and see if the system will suspend.
TActually wrote: ⤴Sat Jul 17, 2021 4:38 pmCoicidentally, I had some issues with the graphics driver loading and with audio on 20.2.
It seems a lot of people are now seeing a difference in the timing of Nvidia driver loading which can mean nouveau sneaks in and loads. In that situation, often restarting X Server with Ctl-Alt-Backspace fixes the issue and a more permanent solution is in this post this thread [SOLVED] NVIDIA driver failing sometimes on boot ("no hardware acceleration"). The inxi output you posted looks like nvidia loaded properly.
TActually wrote: ⤴Sat Jul 17, 2021 4:38 pmMaybe it was just a bad upgrade?
But in either case, I am 100% functional back on 20.1
I wouldn't call this SOLVED,but maybe Mitigated? is there a choice for that?
If you want to stop the investigation at this point, you can just edit the title of the first post and add [CLOSED].
Image
A woman typing on a laptop with LM20.3 Cinnamon.
Top
TActually
Level 1
Level 1
Posts: 9
Joined: Fri Jul 16, 2021 1:04 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by TActually »

Thanks SMG!
For now, I am good, but I don't want to close the investigation. If I have some free time, later on, I'll experiment more.
I know that a friend of mine who also updated to 20.2 from 20.1, had some of the same issues that I did.
I have a feeling that others will start to experience this issue soon.
Don't mind me, just your friendly neighborhood Blerd.
*Mint on the hardware ParrotOS in the VM.*
Top
Evoka
Level 1
Level 1
Posts: 27
Joined: Fri Jul 10, 2015 10:10 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by Evoka »

Hi, I'm having the same issue, with old hardware 2013. I did not upgrade, but completely reinstalled from 19.3 to 20.2, I also had Nvidia 460 before. I did uninstalled all nvida 470 drivers, went to noveau, and back to 460. Unfortunately I forgot to test while I had only Noveau.
I found in the logs that after attempting suspension, I get the following:
systemd-logind
User of sesion c3 not known.
Top
deepakdeshp
Level 20
Level 20
Posts: 12341
Joined: Sun Aug 09, 2015 10:00 am

Re: After 20.2 upgrade, Mint will not sleep/suspend

Post by deepakdeshp »

Evoka please create a new thread for your problem.
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help.
Regards,
Deepak

Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Top
Locked

Return to “Cinnamon”