Hi,
Will someone be so kind to help me set up Conky so everything works? Here's what it looks like so far:
What do I need to adjust in the config file?
Thanks for the help
Help with Conky config LM18.1
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Help with Conky config LM18.1
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Help with Conky config LM18.1
I've made some changes from the image above, but I can find how to change the clock format. Anyone know what I need to change in the config file to change time format?
Also the the CPU / GPU temps. I seem to have two temp readouts for the GPU. I am wanting to get rid of the one on the bottom left and just leave the two temp readouts in the center.
This is the line that I have, can anyone explain what I need to change.
Thanks
Also the the CPU / GPU temps. I seem to have two temp readouts for the GPU. I am wanting to get rid of the one on the bottom left and just leave the two temp readouts in the center.
This is the line that I have, can anyone explain what I need to change.
Code: Select all
$alignc${color7}CPU: ${color3}${hwmon 0 temp 1}°C ${color7}GPU: ${color3}${execi 60 nvidia-settings -t -q GPUCoreTemp}°C
Re: Help with Conky config LM18.1
Thanks for the help
I managed to find the time format searching online. Its just the temps and any other problems you my find as I've butchered the config file a bit today
I managed to find the time format searching online. Its just the temps and any other problems you my find as I've butchered the config file a bit today
Code: Select all
#========================================================================
# Conky-Serdar
#----------------------------------------------------------------------
#sudo apt-get install conky
#extract the zip file and move files to .conky in your home folder
#----------------------------------------------------------------------
#Run(Terminal):
# conky -c ~/.conky/conkyrc
#----------------------------------------------------------------------
#Autostart(Openbox):
# sudo leafpad .config/openbox/autostart
#add these lines below for autostart (without first #)
# # System Info
# conky -c ~/.conky/conkyrc &
#----------------------------------------------------------------------
#Autostart(Ubuntu/Gnome): create conky-startup.sh paste below (without first #)
# #!/bin/bash
# conky -c ~/.conky/conkyrc ;
#alt+F2 type gnome-session-properties add line below to your startup section
# .conky/conky-startup.sh
#
# Gnome 14 and later
#
# cp ~/.conky/conky.desktop /usr/share/gnome/autostart/
#
# or
#
# gedit /usr/share/gnome/autostart/conky.desktop
# addlines below;
#
## #conky.desktop
## [Desktop Entry]
## Type=Application
## Name=Conky
## Comment=Start conky script
## Exec=.conky/conky-startup.sh
## OnlyShowIn=GNOME;
## X-GNOME-Autostart-Phase=Application
#----------------------------------------------------------------------
#Autostart(LXDE)
# sudo leafpad /etc/xdg/lxsession/LXDE/autostart
#add (without first #)
# @conky -c ~/.conky/conkyrc
#----------------------------------------------------------------------
# Disable a section, add "#" beginning of the line
#----------------------------------------------------------------------
# For quad/dual core processors add/remove "#" beginning of the core2,3,4
#
# CPU Info: cat /proc/cpuinfo
#----------------------------------------------------------------------
# Battery Info: ls /proc/acpi/battery > cat /proc/acpi/battery/****/info
# For battery info add/remove "#" beginning of the battery line
#----------------------------------------------------------------------
# alignment b=bottom t=top l=left r=right
#----------------------------------------------------------------------
# Nvidia gpu temp: apt-get install nvidia-settings
#
#========================================================================
background yes
update_interval 1
total_run_times 0
cpu_avg_samples 2
net_avg_samples 2
temperature_unit celsius
double_buffer yes
no_buffers yes
text_buffer_size 2048
gap_x 05
gap_y 40
minimum_size 190 325
maximum_width 325
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,sticky,skip_taskbar,skip_pager,below
own_window_argb_visual yes
own_window_argb_value 255
border_inner_margin 0
border_outer_margin 0
alignment tr
draw_shades yes
draw_outline yes
draw_borders no
draw_graph_borders yes
override_utf8_locale yes
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5
uppercase no
default_color DeepSkyBlue
color1 Orange
color2 Green
color3 Red
color4 Yellow
color5 DDDDDD
color6 AAAAAA
color7 888888
color8 666666
TEXT
${color1}${font :Bold:size=14} $alignc ${time %I:%M %p}
${color}${font :Bold:size=14} $alignc ${time %h} ${time %e} - ${time %Y}${font :Bold:size=08}
$alignc(${time %A})
${color8}$alignc Uptime: $uptime
${color8}${hr 2}
${color5}$alignc Linux Mint 18.1 Serena * ${color5}$alignc $sysname $kernel
${color5}$alignc ${execi 1000 cat /proc/cpuinfo | grep 'model name' | sed -e 's/model name.*: //'| uniq}
${color8}${hr 2}
$alignc${color7}CPU: ${color3}${hwmon 0 temp 1}°C ${color7}GPU: ${color3}${execi 60 nvidia-settings -t -q GPUCoreTemp}°C
${color}${cpubar 8,325}:${color5}$cpu%
${color7}Core1: ${color}${cpubar cpu1 7,80} ${color7}${cpu cpu1}% $alignr${color7}${cpu cpu2}%${color}${cpubar cpu2 7,80}${color7} :Core2
${color7}Core3: ${color}${cpubar cpu3 7,80} ${color7}${cpu cpu3}% $alignr${color7}${cpu cpu4}%${color}${cpubar cpu4 7,80}${color7} :Core4
${color}${cpugraph 15,}
${color5}Process Name ${color5}$alignr CPU% MEM%
${color6}${top name 1}$alignr${top cpu 1} ${top mem 1}
${color7}${top name 2}$alignr${top cpu 2} ${top mem 2}
${color8}${top name 3}$alignr${top cpu 3} ${top mem 3}
${color8}${top name 4}$alignr${top cpu 4} ${top mem 4}
${color4}Memory
${color6}RAM : ${color5}($memmax)${alignr}${color6}$mem${color}${membar 8,75}
${color6}SWAP: ${color5}($swapmax)${alignr}${color6}$swap${color}${swapbar 8,75}
${color8}${hr 4}
${color4}HDD
${color5}Linux:${color1}(${fs_type})${alignr}${color7}${fs_used /} < > ${color7}${fs_free /}
${color8}Total: ${fs_size /}${alignr}${color}${fs_bar 8,150}
${color5}Windows:${color1}(${fs_type /run/media/Windows})${alignr}${color7}${fs_used /run/media/Windows} < > ${color7}${fs_free /run/media/Windows}
${color8}Total: ${fs_size /run/media/Windows}${alignr}${color}${fs_bar 8,150 /run/media/Windows}
${color5}Extra:${color1}(${fs_type /run/media/Extra})${alignr}${color7}${fs_used /run/media/Extra} < > ${color7}${fs_free /run/media/Extra}
${color8}Total: ${fs_size /run/media/Extra}${alignr}${color}${fs_bar 8,150 /run/media/Extra}
${color7}HDD Read-> ${alignc}${color2}${diskio_read}/s ${alignr}${color3}${diskio_write}/s ${color7}<-HDD Write
${color2}${diskiograph_read 8,150} ${alignr}${color3}${diskiograph_write 8,150}${color}
${color8}${hr 4}
${color4}Lan${color} ${alignr}${color7}IP: ${addr enp4s0}
${color7}Download: ${color2}${downspeed enp4s0} k/s ${alignr} $alignr${color7}Upload: ${color3} ${upspeed enp4s0} k/s
${color2}${downspeedgraph enp4s0 8,150} ${alignr}${color3}${upspeedgraph enp4s0 8,150}
${color7}Total:${color2}${totaldown enp4s0} ${alignr}${color7}Total:${color3}${totalup enp4s0}
${color4}Wifi${alignr}${color7}IP: ${addr wlan0}
${color7}ESSID:${color1}${wireless_essid wlan0} ${color7}Rate:${color1}${wireless_bitrate wlan0} ${alignr}${color7}Quality:${color1}${wireless_link_qual_perc wlan0}%${color}${wireless_link_bar 8,75 wlan0}
${color7}Download: ${color2}${downspeed wlan0}KB/s ${color3} $alignr${color7}Upload: ${alignr}${color3}${upspeed wlan0}KB/s
${color2}${downspeedgraph wlan0 8,150} ${alignr}${color3}${upspeedgraph wlan0 8,150}
${color7}Total:${color2}${totaldown wlan0} ${alignr}${color7}Total:${color3}${totalup wlan0}
${color8}${hr 4}
${color4}Battery${color1}${alignc}
${color7}Charging: $color${execi 60 cat /sys/class/power_supply/BAT1}${font Liberation Mono:bold:size=9} ${goto 190}${battery_bar 10,147 BAT1} ${if_match ${battery_percent BAT1} >= 50 }${goto 255}${color 222222}${battery_percent BAT1}%${color}${endif} ${if_match ${battery_percent BAT1} < 50 }${goto 255}${color0}${battery_percent BAT1}%${color}${endif}
${color}${battery_bar BAT1 8,}
Re: Help with Conky config LM18.1
I've also noticed that the download total is massive. Turned on pc this morning, but have been out all day. Come home and it says total downloads is 1.66GB
Is this right, is there a program to check this? or a different Conky config for LAN?
Is this right, is there a program to check this? or a different Conky config for LAN?
- Pjotr
- Level 24
- Posts: 20111
- Joined: Mon Mar 07, 2011 10:18 am
- Location: The Netherlands (Holland) 🇳🇱
- Contact:
Re: Help with Conky config LM18.1
You might find some ideas about configuring Conky in the example configs on my website:
https://sites.google.com/site/easylinux ... forxubuntu
About the download amount: you might be suffering from the default setting for browser.sessionstore.interval in Firefox: https://www.servethehome.com/firefox-is ... to-fix-it/
https://sites.google.com/site/easylinux ... forxubuntu
About the download amount: you might be suffering from the default setting for browser.sessionstore.interval in Firefox: https://www.servethehome.com/firefox-is ... to-fix-it/
Tip: 10 things to do after installing Linux Mint 21.3 Virginia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.
Re: Help with Conky config LM18.1
enp4s0 says the script. so that must be RX or TX or both inidle wrote:I've also noticed that the download total is massive. Turned on pc this morning, but have been out all day. Come home and it says total downloads is 1.66GB
Is this right, is there a program to check this? or a different Conky config for LAN?
Code: Select all
ifconfig enp4s0
Re: Help with Conky config LM18.1
Habitual:
enp4s0 Link encap:Ethernet HWaddr d8:cb:8a:ee:ba:b5
inet addr:192.168.0. xx Bcast:192.168.0. xx Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42328 errors:0 dropped:0 overruns:0 frame:0
TX packets:26869 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51414723 (51.4 MB) TX bytes:4683744 (4.6 MB)
Interrupt:19
I've rebooted since posting as I was following Pjotr guide and had to reboot after updating GRUB.
I'm also now trying a different Conky Network Config to see if that changes anything:
enp4s0 Link encap:Ethernet HWaddr d8:cb:8a:ee:ba:b5
inet addr:192.168.0. xx Bcast:192.168.0. xx Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42328 errors:0 dropped:0 overruns:0 frame:0
TX packets:26869 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:51414723 (51.4 MB) TX bytes:4683744 (4.6 MB)
Interrupt:19
I've rebooted since posting as I was following Pjotr guide and had to reboot after updating GRUB.
I'm also now trying a different Conky Network Config to see if that changes anything:
Code: Select all
${color0}Public IP: ${color}${execi 3600 curl -s http://icanhazip.com}
${color0}${execpi 600 ruby ./scripts/network_general_info.rb}
${color0}${goto 20}Down speed: $color${downspeed wlp3s0} ${goto 200}${color0}Up speed: $color${upspeed wlp3s0}
$color${downspeedgraph wlp3s0 12,150 303030 00ff00} ${alignr}$color${upspeedgraph wlp3s0 12,150 303030 ff0000}
${color0}Total down: $color${totaldown wlp3s0} ${goto 180}${color0}Total up: $color${totalup wlp3s0}
${color0}Inbound connections: $color${tcp_portmon 1 32767 count}
${color0}Outbound connections: $color${tcp_portmon 32768 61000 count}
${color0}Proto Address ${goto 222}Name${color}${font Liberation Mono:bold:size=9}
${execpi 6 ruby ./scripts/netstat.rb}