also if I ran conky in the terminal I notice the following errors
Code: Select all
conky: Syntax error (/etc/conky/conky.conf:2: '=' expected near 'yes') while reading config file.
conky: Assuming it's in old syntax and attempting conversion.
conky: desktop window (1400003) is subwindow of root window (c0)
conky: window type - override
conky: drawing to created window (0x5600001)
conky: drawing to double buffer
conky: one or more $endif's are missing
the configuration looks like this.
Code: Select all
# Use Xft?
use_xft yes
xftfont OFL Sorts Mill Goudy:size=8
xftalpha 0.8
text_buffer_size 2048
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
own_window_class conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 180 0
#maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
own_window_colour white
color1 white
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 35
gap_y 35
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# Use Xft?
use_xft yes
xftfont OFL Sorts Mill Goudy:size=8
xftalpha 0.8
text_buffer_size 2048
# Update interval in seconds
update_interval 1
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
own_window_class conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
background no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 180 0
#maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
own_window_colour white
color1 white
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 35
gap_y 35
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
TEXT
${font Goudy Bookletter 1911:style=Bold}SYSTEM${font} ${hr 2}
${alignc 17}${font Sniglet:size=16}Home${font}
${voffset 2}${font StyleBats:size=16}i${font} Kernel: ${alignr}${kernel}
${font StyleBats:size=16}A${font} CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
${font StyleBats:size=16}A${font} CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
${font StyleBats:size=16}g${font} RAM: $memperc% ${alignr}${membar 8,60}
${font StyleBats:size=16}l${font} Temperature: ${alignr}${acpitemp}C
${font StyleBats:size=16}q${font} Uptime: ${alignr}${uptime}
${font Goudy Bookletter 1911:style=Bold}HD${font} ${hr 2}
${voffset 4}${font Pie charts for maps:size=14}7${font} ${voffset -5}Root:
${voffset 4}${fs_used /}/${fs_size /} ${alignr}${fs_bar 8,60 /}
${if_existing /proc/net/route eth0}
${font Goudy Bookletter 1911:style=Bold}ETHERNET${font} ${hr 2}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed eth0} ${alignr}${downspeedgraph eth0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed eth0} ${alignr}${upspeedgraph eth0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14}Z${font} Signal: ${wireless_link_qual eth0}% ${alignr}${wireless_link_bar 8,60 eth0}
${voffset 4}${font PizzaDude Bullets:size=14}IP${font} Public Ip: ${alignr} ${execi 3600 wget -O - http://ip.tupeux.com | tail}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr eth0}
${else if_existing /proc/net/route wlp2s0}
${font Goudy Bookletter 1911:style=Bold}WIRELESS${font} ${hr 2}
${voffset 4}${font PizzaDude Bullets:size=14}U${font} Down: ${downspeed wlp2s0} ${alignr}${downspeedgraph wlp2s0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14}O${font} Up: ${upspeed wlp2s0} ${alignr}${upspeedgraph wlp2s0 8,60 000000 000000}
${voffset 4}${font PizzaDude Bullets:size=14}Z${font} Signal: ${wireless_link_qual wlp2s0}% ${alignr}${wireless_link_bar 8,60 wlp2s0}
${voffset 4}${font PizzaDude Bullets:size=14}b${font} Public Ip: ${alignr} ${execi 3600 wget -O - http://ip.tupeux.com | tail}
${voffset 4}${font PizzaDude Bullets:size=14}a${font} Local Ip: ${alignr}${addr wlp2s0}
${font Goudy Bookletter 1911:style=Bold}PROCESSES${font} ${hr 2}
NAME $alignr PID CPU
${top name 1} $alignr ${top pid 1} ${top cpu 1}
${top name 2} $alignr ${top pid 2} ${top cpu 2}
${top name 3} $alignr ${top pid 3} ${top cpu 3}
${top name 4} $alignr ${top pid 4} ${top cpu 4}
${top name 5} $alignr ${top pid 5} ${top cpu 5}
${top name 6} $alignr ${top pid 6} ${top cpu 6}
${top name 7} $alignr ${top pid 7} ${top cpu 7}
${font Goudy Bookletter 1911:style=Bold}MEMORY${font} ${hr 2}
NAME $alignr PID RAM
${top_mem name 1} $alignr ${top_mem pid 1} ${top_mem mem 1}
${top_mem name 2} $alignr ${top_mem pid 2} ${top_mem mem 2}
${top_mem name 3} $alignr ${top_mem pid 3} ${top_mem mem 3}
${top_mem name 4} $alignr ${top_mem pid 4} ${top_mem mem 4}
${top_mem name 5} $alignr ${top_mem pid 5} ${top_mem mem 5}
${top_mem name 6} $alignr ${top_mem pid 6} ${top_mem mem 6}
${top_mem name 7} $alignr ${top_mem pid 7} ${top_mem mem 7}
Any ideas?