The motherboard bios shows the info for 2 temps and 2 fan speeds, but the only thing I can find in the hwmon directories are 1 temp, and it says the cpu is 8 degrees.
Am I supposed to build a more exact kernal to get this to work for conky?
hwmon doesn't show info for motherboard sensors
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
hwmon doesn't show info for motherboard sensors
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: hwmon doesn't show info for motherboard sensors
Did you install lm-sensors? See here to configure.
Re: hwmon doesn't show info for motherboard sensors
Yes, and based on that, it looks like I must be getting the pci temp from /sys/class/hwmon/hwmon1/temp1_input
but in /sys/class/hwmon/hwmon0 I don't see any files except an empty uevent file. and in hwmon1 there's no other interesting files other than the temp1_input.
I'm using conky lines:
GPU temp: ${nvidia temp}°C
CPU temp: ${hwmon 1 temp 1}°C
but in /sys/class/hwmon/hwmon0 I don't see any files except an empty uevent file. and in hwmon1 there's no other interesting files other than the temp1_input.
I'm using conky lines:
GPU temp: ${nvidia temp}°C
CPU temp: ${hwmon 1 temp 1}°C
Code: Select all
zcot@zcot-2016 ~ $ sensors
f71889ed-isa-0a00
Adapter: ISA adapter
+3.3V: +3.31 V
in1: +1.07 V (max = +2.04 V)
in2: +1.00 V
in3: +0.96 V
in4: +0.96 V
in5: +1.10 V
in6: +0.00 V
3VSB: +3.33 V
Vbat: +3.02 V
fan1: 3401 RPM
fan2: 3957 RPM
fan3: 0 RPM ALARM
temp1: +27.0°C (high = +255.0°C, hyst = +251.0°C) ALARM (CRIT)
(crit = +255.0°C, hyst = +251.0°C) sensor = transistor
temp2: +30.0°C (high = +255.0°C, hyst = +251.0°C) ALARM (CRIT)
(crit = +255.0°C, hyst = +251.0°C) sensor = transistor
temp3: FAULT (high = +255.0°C, hyst = +253.0°C)
(crit = +255.0°C, hyst = +253.0°C) sensor = transistor
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +18.5°C (high = +70.0°C)