Rotating screen for 90 degress?
Posted: Tue Mar 29, 2011 4:17 am
Hi,
I have one 23" (1920x1080) screen rotated CCW for 90 degress and one 19" (1280x1024) not rotated.
I'm using nVidia drivers and i want to have one screen trugh those 2 monitors - TwinView.
so problem is when I rotate screen, picture rotates on all monitors. So i want to rotate only 23" monitor.
Under monitor I have rotate option, there is no difference if that text is present or not.
If i set my configuration to separate screen, there is no problem whit rotating screens. But I can't move window from one Xserver to another.
I have one 23" (1920x1080) screen rotated CCW for 90 degress and one 19" (1280x1024) not rotated.
I'm using nVidia drivers and i want to have one screen trugh those 2 monitors - TwinView.
so problem is when I rotate screen, picture rotates on all monitors. So i want to rotate only 23" monitor.
Code: Select all
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@biber) Tue May 18 10:36:08 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "Rotate" "CW"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "LG Electronics M237WD"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "Rotate" "CCW"
Option "RandRRotation" "on"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: 1280x1024_60 +0+0, DFP: 1920x1080_60 +0+10$
SubSection "Display"
Depth 24
Option "Rotate" "CCW"
Option "RandRRotation" "on"
EndSubSection
EndSection
If i set my configuration to separate screen, there is no problem whit rotating screens. But I can't move window from one Xserver to another.