Problems with virtualbox [SOLVED]

Archived topics about LMDE 1 and LMDE 2
Locked
lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Problems with virtualbox [SOLVED]

Post by lleiria »

I have virtualbox installed and all was running very well when suddenly... all went wrong. When I shut down the computer I received one red "failed" after the message "Cannot unload module vboxdrv ... failed!"
When I try to launch virtualbox, the whole system freezes.
Now I was following the intructions to install gwibber and I received that in terminal:

Code: Select all

lleiria@pc-principal-desktop ~ $ sudo apt-get build-dep gwibber
A ler as listas de pacotes... Pronto
A construir árvore de dependências       
A ler a informação de estado... Pronto
(...)
A seleccionar pacote anteriormente não seleccionado python-all
A descompactar python-all (desde .../python-all_2.6.6-3+squeeze1_all.deb) ...
A processar 'triggers' para man-db ...
A processar 'triggers' para menu ...
A processar 'triggers' para gnome-menus ...
A processar 'triggers' para desktop-file-utils ...
A instalar virtualbox-3.2 (3.2.12-68302~Debian~squeeze) ...
addgroup: The group `vboxusers' already exists as a system group. Exiting.
Stopping VirtualBox kernel modules:
Cannot unload module vboxdrv ... failed!
Starting VirtualBox kernel modules:
And terminal hangs up...
What can I do? I really wouldn't like to uninstall virtualbox, because I need to use QwarkExpress in Windows and I lost a lot of time to install fonts, and so on...
I really would appreciate some help.
Thanks
Last edited by lleiria on Fri Dec 17, 2010 5:38 am, edited 1 time in total.
Image

cwsnyder
Level 6
Level 6
Posts: 1242
Joined: Wed Oct 20, 2010 6:49 am
Location: Nappanee, IN, USA

Re: Problems with virtualbox

Post by cwsnyder »

First, you won't 'lose' anything if you re-install or remove VirtualBox, nor will you lose your installation customization on Windows unless you delete or damage files in your Windows.vdi (or whatever you called your Windows virtual machine) or other settings in the ~/.VirtualBox folder.

It looks as if you were blindly clicking on links from within VirtualBox.

Remember, Linux is NOT Windows.

I am just a beginner to intermediate Linux user, myself, so I can't guide you to reverse what you may have done. The only recommendation I have is to open package manager or Synaptic, search for VirtualBox, find your VirtualBox installation, right click on it and select 'Mark for Complete Removal', then select the Apply symbol in the top action area. Now re-install VirtualBox, and hopefully your problem will be solved.

If you install VirtualBox from the Mint repositories, Mint will handle the updates for you with relatively few problems, although the version in the repositories may not be the very latest, and the OSE version doesn't support USB access from within the virtual machine. If you go to VirtualBox.org and install from .deb files, you should be careful to NOT click on the box about installing the latest and greatest version! If you do want the bleeding edge, my recommendation when you see a notice of an upgrade is to shut down VirtualBox, open your browser & download the upgrade .deb file, then either double click the file or use terminal commands to install the upgrade.

Maybe someone else has a better recommendation.
LMDE Mate 64-bit, LM17.3 Cinnamon 64-bit
Debian Mate 64-bit, Xubuntu xenial 64-bit, Ubuntu-Mate 14.04 64-bit, Antergos Xfce 64-bit, PCLinuxOS Mate 64-bit

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

In fact, the problem is worse. I can't install any uppdate anymore, because of the virtualbox problem, that makes any install freeze.
An exampple:

Code: Select all

(....) A instalar libavutil50 (5:0.6.1+svn20101128-0.1) ...
A instalar aptdaemon (0.31+bzr506-0ubuntu2) ...
A instalar libavcore0 (5:0.6.1+svn20101128-0.1) ...
A instalar libwebkit-1.0-common (1.2.5-2.1) ...
A instalar libkdecore5 (4:4.4.5-2) ...
A instalar git (1:1.7.2.3-2.1) ...
A instalar libnm-glib2 (0.8.1-5) ...
A instalar python-all (2.6.6-3+squeeze2) ...
A instalar libpostproc51 (5:0.6.1+svn20101128-0.1) ...
A instalar virtualbox-3.2 (3.2.12-68302~Debian~squeeze) ...
addgroup: O grupo `vboxusers' já existe como um grupo de sistema. A terminar.
Stopping VirtualBox kernel modules:
Cannot unload module vboxdrv ... failed!
Starting VirtualBox kernel modules:
A instalar libavutil50 (5:0.6.1+svn20101128-0.1) ...
A instalar aptdaemon (0.31+bzr506-0ubuntu2) ...
A instalar libavcore0 (5:0.6.1+svn20101128-0.1) ...
A instalar libwebkit-1.0-common (1.2.5-2.1) ...
A instalar libkdecore5 (4:4.4.5-2) ...
A instalar git (1:1.7.2.3-2.1) ...
A instalar libnm-glib2 (0.8.1-5) ...
A instalar python-all (2.6.6-3+squeeze2) ...
A instalar libpostproc51 (5:0.6.1+svn20101128-0.1) ...
A instalar virtualbox-3.2 (3.2.12-68302~Debian~squeeze) ...
addgroup: O grupo `vboxusers' já existe como um grupo de sistema. A terminar.
Stopping VirtualBox kernel modules:
Cannot unload module vboxdrv ... failed!
Starting VirtualBox kernel modules:
Anyone: should I uninstall virtualbox?
And no, I don't randomly click anything I see. I'm using Linux mint since felicia and switched to lmde a month ago, both in my work and home machines. I my work everything is ok, including virtualbox.
Image

zole052
Level 2
Level 2
Posts: 59
Joined: Thu Jan 29, 2009 6:32 pm
Location: Umag, Croatia

Re: Problems with virtualbox

Post by zole052 »

I had yesterday the same problem. The only solution i found was to uninstall virtualbox make full update including level 4 and 5 updates and reinstall virtualbox after a reboot.

I don t know if the problem will persist but for now everything works as it should.

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

You can try to recreate the virtualbox kernel modules first. Open a terminal and execute

Code: Select all

sudo /etc/init.d/vboxdrv setup
If that doesn't help reinstall virtualbox

Code: Select all

sudo aptitude reinstall virtualbox-3.2
But you can also use the way suggested by zole052

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

Thank you zole052 and dfx, but it didn't work. First I tried dfx's advices, but I kept receiving the same message: cannot unload module vboxdrv... Failed. Then: starting virtualbox kernel modules... and freeze the terminal.
Then I unisntalled virtualbox with synaptic, but when I installed it (via deb. package) I received the same error message. I had to stop it with ctrl+c.
See the snapshot.
I don't know what to do now...
Help is welcome, once again.
ThanksImage
Image

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

Can you manually unload the module?

Code: Select all

sudo modprobe -rv vboxdrv
Have you closed virtualbox completely and are not running any virtual machines?

Code: Select all

ps aux | grep VBox

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

Hi, dfx
Of course I'm not running any virtual machine, I couldn't even if I wanted to.
As for your questions:
sudo modprobe -rv vboxdrv just gets no answer, terminal blinks and nothing happens. After some minutes, I stopped it with ctrl+c.

Result of ps aux | grep VBox:

Code: Select all

lleiria@pc-principal ~ $ ps aux | grep VBox
lleiria   2684  0.0  0.0   3304   764 pts/1    R+   13:09   0:00 grep --colour=auto VBox
lleiria@pc-principal ~ $ 
Thanks for your patience...
Image

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

I tested on my box and I also cannot manually unload the module, but I still have some ideas ;-)

What output do you get when running

Code: Select all

sudo lsmod | grep vbox
You can prevent the start of virtualbox kernel modules by editing /etc/init.d/vboxdrv. Just insert

Code: Select all

return 0
at the beginning of the file, save it and reboot. Afterwards lsmod should display you no virtualbox modules. Then remove the 'return' from /etc/init.d/vboxdrv and run it

Code: Select all

sudo /etc/init.d/vboxdrv setup

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

I followed your instructions and it workeed.
Result of the final step:

Code: Select all

lleiria@pc-principal ~ $ sudo /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules:done..
Uninstalling old VirtualBox DKMS kernel modules:done..
Removing old VirtualBox netadp kernel module:done..
Removing old VirtualBox netflt kernel module:done..
Removing old VirtualBox kernel module:done..
Trying to register the VirtualBox kernel modules using DKMS:done..
Starting VirtualBox kernel modules:done..
lleiria@pc-principal ~ $ 
But then I reinstalllled virtualbox (cause I had unistallled it and :

Code: Select all

lleiria@pc-principal ~ $ sudo aptitude reinstall virtualbox-3.2
Os seguintes pacotes serão REINSTALADOS:     
  virtualbox-3.2 
0 pacotes actualizados, 0 novos instalados, 1 reinstalados, 0 para serem removidos e 31 não actualizados.
É preciso obter 0 B/50,5 MB de ficheiros. Depois de desempacotar serão utilizados 0 B.
A pré-configurar os pacotes...                  
(A ler a base de dados ... 170850 files and directories currently installed.)
A preparar para substituir virtualbox-3.2 3.2.12-68302~Debian~squeeze (a usar .../virtualbox-3.2_3.2.12-68302~Debian~squeeze_i386.deb) ...
Stopping VirtualBox kernel modules:done..
A descompactar substituto virtualbox-3.2 ...
A processar 'triggers' para gnome-menus ...
A processar 'triggers' para desktop-file-utils ...
A instalar virtualbox-3.2 (3.2.12-68302~Debian~squeeze) ...
addgroup: O grupo `vboxusers' já existe como um grupo de sistema. A terminar.
Starting VirtualBox kernel modules:
Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] Oops: 0000 [#1] SMP 

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] last sysfs file: /sys/devices/virtual/misc/vboxdrv/uevent

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] Process modprobe (pid: 5263, ti=f5d60000 task=f5adf2c0 task.ti=f5d60000)

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] Stack:

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] Call Trace:

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] Code: c6 20 00 00 00 74 0f 89 e8 b9 02 00 00 00 99 f7 f9 89 04 24 29 c5 83 e6 10 74 0c 89 e8 be 04 00 00 00 99 f7 fe 29 c5 8b 44 24 24 <8b> 4c 83 0c 8d 44 0d 00 39 44 24 04 76 29 8b 74 24 04 31 d2 eb 

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] EIP: [<c108a321>] zone_watermark_ok+0x5c/0x9d SS:ESP 0068:f5d61de0

Message from syslogd@pc-principal at Dec 12 15:13:53 ...
 kernel:[  644.328501] CR2: 000000007b4ccdd7

modprobe vboxdrv failed. Please use 'dmesg' to find out why ... failed!
A processar 'triggers' para python-central ...
                                             
lleiria@pc-principal ~ $ 
So: "modprobe vboxdrv failed. Please use 'dmesg' to find out why ... failed!"

I don't know what dmesg is but I ran it. The result is quite large:

Code: Select all

[    0.227590] pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
[    0.227594] pci 0000:00:1c.1:   MEM window: 0xcff00000-0xcfffffff
[    0.227598] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.227604] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.227607] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.227612] pci 0000:00:1e.0:   MEM window: 0xcfe00000-0xcfefffff
[    0.227616] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.227631] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.227635] pci 0000:00:1c.0: setting latency timer to 64
[    0.227644] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.227648] pci 0000:00:1c.1: setting latency timer to 64
[    0.227654] pci 0000:00:1e.0: setting latency timer to 64
[    0.227659] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.227661] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.227664] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.227666] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc01fffff]
[    0.227669] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff]
[    0.227671] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.227674] pci_bus 0000:02: resource 1 mem: [0xcff00000-0xcfffffff]
[    0.227676] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.227678] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
[    0.227691] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.227693] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.227717] NET: Registered protocol family 2
[    0.227791] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.228041] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.228517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.228774] TCP: Hash tables configured (established 131072 bind 65536)
[    0.228776] TCP reno registered
[    0.228849] NET: Registered protocol family 1
[    0.228866] pci 0000:00:02.0: Boot video device
[    0.229019] Unpacking initramfs...
[    0.461415] Freeing initrd memory: 9206k freed
[    0.466346] audit: initializing netlink socket (disabled)
[    0.466363] type=2000 audit(1292166189.463:1): initialized
[    0.466632] highmem bounce pool size: 64 pages
[    0.466636] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.467907] VFS: Disk quotas dquot_6.5.2
[    0.467956] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.468029] msgmni has been set to 1707
[    0.468217] alg: No test for stdrng (krng)
[    0.468263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.468266] io scheduler noop registered
[    0.468267] io scheduler anticipatory registered
[    0.468269] io scheduler deadline registered
[    0.468300] io scheduler cfq registered (default)
[    0.468421] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.468430] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.468530] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.468537] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.468669] isapnp: Scanning for PnP cards...
[    0.821617] isapnp: No Plug & Play device found
[    0.822865] Linux agpgart interface v0.103
[    0.822934] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[    0.823640] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    0.826035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.826103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.826198] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.826571] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.826718] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.829320] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.829325] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.829376] mice: PS/2 mouse device common for all mice
[    0.829419] rtc_cmos 00:03: RTC can wake from S4
[    0.829450] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.829473] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.829487] cpuidle: using governor ladder
[    0.829489] cpuidle: using governor menu
[    0.829493] No iBFT detected.
[    0.829793] TCP cubic registered
[    0.829916] NET: Registered protocol family 10
[    0.830301] lo: Disabled Privacy Extensions
[    0.830566] Mobile IPv6
[    0.830568] NET: Registered protocol family 17
[    0.830581] Using IPI No-Shortcut mode
[    0.830635] PM: Resume from disk failed.
[    0.830641] registered taskstats version 1
[    0.830970] rtc_cmos 00:03: setting system clock to 2010-12-12 15:03:10 UTC (1292166190)
[    0.830993] Initalizing network drop monitor service
[    0.831015] Freeing unused kernel memory: 372k freed
[    0.831166] Write protecting the kernel text: 2492k
[    0.831187] Write protecting the kernel read-only data: 916k
[    0.845209] udev: starting version 158
[    0.846322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.950591] usbcore: registered new interface driver usbfs
[    0.950719] usbcore: registered new interface driver hub
[    0.950846] usbcore: registered new device driver usb
[    0.956921] SCSI subsystem initialized
[    0.971629] libata version 3.00 loaded.
[    0.975906] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.975915] atl1 0000:02:00.0: setting latency timer to 64
[    0.975934] atl1 0000:02:00.0: version 2.1.3
[    0.977813] firewire_ohci 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.979814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.979836] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.979847] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.979851] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.979960] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.979977] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.979988] ehci_hcd 0000:00:1d.7: debug port 1
[    0.981629] Floppy drive(s): fd0 is 1.44M
[    0.983863] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.983884] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfdffc00
[    0.989284] uhci_hcd: USB Universal Host Controller Interface driver
[    0.990925] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.999663] FDC 0 is a post-1991 82077
[    0.999792] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.999836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.999841] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.999845] usb usb1: Product: EHCI Host Controller
[    0.999849] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    0.999852] usb usb1: SerialNumber: 0000:00:1d.7
[    0.999975] usb usb1: configuration #1 chosen from 1 choice
[    1.000022] hub 1-0:1.0: USB hub found
[    1.000029] hub 1-0:1.0: 8 ports detected
[    1.000086] ata_piix 0000:00:1f.1: version 2.13
[    1.000105] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.000142] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.000198] scsi0 : ata_piix
[    1.000894] scsi1 : ata_piix
[    1.002450] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.002453] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.002486] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.002493] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.002496] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.002505] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.002534] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[    1.002569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.002572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.002574] usb usb2: Product: UHCI Host Controller
[    1.002576] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.002578] usb usb2: SerialNumber: 0000:00:1d.0
[    1.002636] usb usb2: configuration #1 chosen from 1 choice
[    1.002662] hub 2-0:1.0: USB hub found
[    1.002667] hub 2-0:1.0: 2 ports detected
[    1.002725] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.002730] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.002763] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.003810] scsi2 : ata_piix
[    1.003863] scsi3 : ata_piix
[    1.005666] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 17
[    1.005669] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 17
[    1.005695] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.005702] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.005706] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.005714] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.005742] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[    1.005772] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.005774] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.005776] usb usb3: Product: UHCI Host Controller
[    1.005778] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.005780] usb usb3: SerialNumber: 0000:00:1d.1
[    1.005838] usb usb3: configuration #1 chosen from 1 choice
[    1.005864] hub 3-0:1.0: USB hub found
[    1.005869] hub 3-0:1.0: 2 ports detected
[    1.005912] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.005917] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.005920] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.005928] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.005958] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[    1.005987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.005989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.005991] usb usb4: Product: UHCI Host Controller
[    1.005993] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.005995] usb usb4: SerialNumber: 0000:00:1d.2
[    1.006046] usb usb4: configuration #1 chosen from 1 choice
[    1.006071] hub 4-0:1.0: USB hub found
[    1.006076] hub 4-0:1.0: 2 ports detected
[    1.006122] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.006127] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.006130] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.006138] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.006167] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[    1.006194] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.006197] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006199] usb usb5: Product: UHCI Host Controller
[    1.006201] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.006202] usb usb5: SerialNumber: 0000:00:1d.3
[    1.006254] usb usb5: configuration #1 chosen from 1 choice
[    1.006277] hub 5-0:1.0: USB hub found
[    1.006284] hub 5-0:1.0: 2 ports detected
[    1.060022] firewire_ohci: Added fw-ohci device 0000:01:03.0, OHCI version 1.10
[    1.060106] ohci_hcd 0000:01:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.060132] ohci_hcd 0000:01:0a.0: OHCI Host Controller
[    1.060145] ohci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 6
[    1.060169] ohci_hcd 0000:01:0a.0: irq 22, io mem 0xcfefd000
[    1.145948] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.145952] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.145954] usb usb6: Product: OHCI Host Controller
[    1.145956] usb usb6: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[    1.145958] usb usb6: SerialNumber: 0000:01:0a.0
[    1.146029] usb usb6: configuration #1 chosen from 1 choice
[    1.146056] hub 6-0:1.0: USB hub found
[    1.146063] hub 6-0:1.0: 3 ports detected
[    1.146120] ehci_hcd 0000:01:0a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    1.146140] ehci_hcd 0000:01:0a.2: EHCI Host Controller
[    1.146149] ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 7
[    1.168028] ehci_hcd 0000:01:0a.2: irq 20, io mem 0xcfeffc00
[    1.172506] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[    1.172509] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.172601] ata3.00: ATA-7: SAMSUNG SP1603C, VL100-50, max UDMA7
[    1.172604] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.172634] ata3.01: ATAPI: ASUS    DRW-1814BLT, 1.13, max UDMA/66
[    1.180030] ehci_hcd 0000:01:0a.2: USB 2.0 started, EHCI 1.00
[    1.180056] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.180060] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.180064] usb usb7: Product: EHCI Host Controller
[    1.180068] usb usb7: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.180071] usb usb7: SerialNumber: 0000:01:0a.2
[    1.180182] usb usb7: configuration #1 chosen from 1 choice
[    1.180206] hub 7-0:1.0: USB hub found
[    1.180212] hub 7-0:1.0: 5 ports detected
[    1.180644] ohci_hcd 0000:01:0a.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    1.180657] ohci_hcd 0000:01:0a.1: OHCI Host Controller
[    1.180672] ohci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 8
[    1.180714] ata4.00: configured for UDMA/133
[    1.180739] ohci_hcd 0000:01:0a.1: irq 23, io mem 0xcfefe000
[    1.204368] ata3.00: configured for UDMA/133
[    1.220238] ata3.01: configured for UDMA/66
[    1.220588] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP1603C  VL10 PQ: 0 ANSI: 5
[    1.221238] scsi 2:0:1:0: CD-ROM            ASUS     DRW-1814BLT      1.13 PQ: 0 ANSI: 5
[    1.221465] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[    1.230683] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.230729] sd 2:0:0:0: [sda] Write Protect is off
[    1.230731] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.230751] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.230868]  sda:
[    1.231037] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.231079] sd 3:0:0:0: [sdb] Write Protect is off
[    1.231082] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.231100] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.231200]  sdb: sdb1 < sda1 sda2 sda3
[    1.238468]  sdb5 >
[    1.238783] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.265816] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.265819] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.265821] usb usb8: Product: OHCI Host Controller
[    1.265823] usb usb8: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[    1.265825] usb usb8: SerialNumber: 0000:01:0a.1
[    1.265904] usb usb8: configuration #1 chosen from 1 choice
[    1.265933] hub 8-0:1.0: USB hub found
[    1.265940] hub 8-0:1.0: 2 ports detected
[    1.284474] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.284478] Uniform CD-ROM driver Revision: 3.20
[    1.284570] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    1.284791] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.289595] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.289932] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    1.290248] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.312541] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    1.446340] usb 1-8: New USB device found, idVendor=058f, idProduct=6362
[    1.446343] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.446347] usb 1-8: Product: Mass Storage Device
[    1.446349] usb 1-8: Manufacturer: Generic
[    1.446351] usb 1-8: SerialNumber: 058F312D81B
[    1.446435] usb 1-8: configuration #1 chosen from 1 choice
[    1.454624] Initializing USB Mass Storage driver...
[    1.454715] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.454782] usbcore: registered new interface driver usb-storage
[    1.454784] USB Mass Storage support registered.
[    1.454868] usb-storage: device found at 2
[    1.454870] usb-storage: waiting for device to settle before scanning
[    1.556551] usb 7-5: new high speed USB device using ehci_hcd and address 2
[    1.560134] firewire_core: created device fw0: GUID 0011d800013c6652, S400
[    1.689574] usb 7-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.689577] usb 7-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.689580] usb 7-5: Product: USB2.0 Hub
[    1.689657] usb 7-5: configuration #1 chosen from 1 choice
[    1.689977] hub 7-5:1.0: USB hub found
[    1.690323] hub 7-5:1.0: 4 ports detected
[    1.865725] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    1.972291] usb 7-5.1: new high speed USB device using ehci_hcd and address 3
[    2.065389] usb 7-5.1: New USB device found, idVendor=05e3, idProduct=0608
[    2.065394] usb 7-5.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.065399] usb 7-5.1: Product: USB2.0 Hub
[    2.065539] usb 7-5.1: configuration #1 chosen from 1 choice
[    2.065804] hub 7-5.1:1.0: USB hub found
[    2.066137] hub 7-5.1:1.0: 4 ports detected
[    2.140384] usb 7-5.4: new high speed USB device using ehci_hcd and address 4
[    2.311841] usb 7-5.4: New USB device found, idVendor=8564, idProduct=1000
[    2.311847] usb 7-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.311851] usb 7-5.4: Product: Mass Storage Device
[    2.311855] usb 7-5.4: Manufacturer: JetFlash
[    2.311858] usb 7-5.4: SerialNumber: I5FM0R73
[    2.311993] usb 7-5.4: configuration #1 chosen from 1 choice
[    2.312201] scsi5 : SCSI emulation for USB Mass Storage devices
[    2.312340] usb-storage: device found at 4
[    2.312342] usb-storage: waiting for device to settle before scanning
[    3.318081] udev: starting version 158
[    3.593411] ACPI: SSDT bf79e0b0 00208 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    3.593630] processor LNXCPU:00: registered as cooling_device0
[    3.593917] ACPI: SSDT bf79e2c0 0013A (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    3.594697] processor LNXCPU:01: registered as cooling_device1
[    3.729759] udev: renamed network interface eth0 to eth1
[    3.758387] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    3.758394] ACPI: Power Button [PWRB]
[    3.758481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.758485] ACPI: Power Button [PWRF]
[    3.772576] logips2pp: Detected unknown logitech mouse model 127
[    3.876239] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.943877] [drm] Initialized drm 1.1.0 20060810
[    3.990023] parport_pc 00:07: reported by Plug and Play ACPI
[    3.990133] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    4.083626] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.083632] i915 0000:00:02.0: setting latency timer to 64
[    4.089234] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    4.091447] [drm] set up 7M of stolen space
[    4.092392] [drm] initialized overlay support
[    4.100506] intel_rng: FWH not detected
[    4.261806] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    4.280687] cfg80211: Using static regulatory domain info
[    4.280689] cfg80211: Regulatory domain: US
[    4.280690] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.280693] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    4.280695] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.280697] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.280700] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.280702] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.280704] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    4.280914] cfg80211: Calling CRDA for country: US
[    4.363908] Console: switching to colour frame buffer device 210x65
[    4.371616] fb0: inteldrmfb frame buffer device
[    4.371617] registered panic notifier
[    4.371678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.580728] rtl8180 0000:01:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    4.840601] phy0: Selected rate control algorithm 'minstrel'
[    4.841178] phy0: hwaddr 00:17:3f:32:d6:a3, RTL8185vD + rtl8225z2
[    4.911656] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.911682] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.014324] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    5.748685] Adding 6142968k swap on /dev/sda2.  Priority:-1 extents:1 across:6142968k 
[    5.751307] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[    5.828221] loop: module loaded
[    6.083571] fuse init (API version 7.13)
[    6.452397] usb-storage: device scan complete
[    6.453004] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    6.453504] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    6.454004] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    6.454503] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    6.455039] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    6.455298] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    6.455564] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    6.455951] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    6.457257] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    6.459480] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    6.460985] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    6.463981] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    7.312967] usb-storage: device scan complete
[    7.314711] scsi 5:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[    7.315472] sd 5:0:0:0: Attached scsi generic sg7 type 0
[    7.316559] sd 5:0:0:0: [sdg] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB)
[    7.317570] sd 5:0:0:0: [sdg] Write Protect is off
[    7.317576] sd 5:0:0:0: [sdg] Mode Sense: 03 00 00 00
[    7.317585] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[    7.319682] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[    7.319739]  sdg: sdg1
[    7.752103] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[    7.752156] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[   11.264752] atl1 0000:02:00.0: irq 26 for MSI/MSI-X
[   11.264870] atl1 0000:02:00.0: eth1 link is up 100 Mbps full duplex
[   13.421719] Bluetooth: Core ver 2.15
[   13.421791] NET: Registered protocol family 31
[   13.421794] Bluetooth: HCI device and connection manager initialized
[   13.421798] Bluetooth: HCI socket layer initialized
[   13.457411] Bluetooth: L2CAP ver 2.14
[   13.457415] Bluetooth: L2CAP socket layer initialized
[   13.473055] Bluetooth: RFCOMM TTY layer initialized
[   13.473061] Bluetooth: RFCOMM socket layer initialized
[   13.473064] Bluetooth: RFCOMM ver 1.11
[   13.581473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.581478] Bluetooth: BNEP filters: protocol multicast
[   13.608577] Bridge firewalling registered
[   15.308326] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.514049] Bluetooth: SCO (Voice Link) ver 0.6
[   15.514051] Bluetooth: SCO socket layer initialized
[   15.597994] lp0: using parport0 (interrupt-driven).
[   15.654608] ppdev: user-space parallel port driver
[   21.985710] CPU0 attaching NULL sched-domain.
[   21.985718] CPU1 attaching NULL sched-domain.
[   22.008227] CPU0 attaching sched-domain:
[   22.008233]  domain 0: span 0-1 level MC
[   22.008238]   groups: 0 1
[   22.008246] CPU1 attaching sched-domain:
[   22.008249]  domain 0: span 0-1 level MC
[   22.008253]   groups: 1 0
[   22.156011] eth1: no IPv6 routers present
[  133.412060] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  417.783613] vboxdrv: Found 2 processor cores.
[  417.784385] vboxdrv: fAsync=0 offMin=0x391 offMax=0x21bb
[  417.784460] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  417.784464] vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
[  644.328300] vboxdrv: Found 2 processor cores.
[  644.328485] BUG: unable to handle kernel paging request at 7b4ccdd7
[  644.328490] IP: [<c108a321>] zone_watermark_ok+0x5c/0x9d
[  644.328499] *pde = 00000000 
[  644.328501] Oops: 0000 [#1] SMP 
[  644.328501] last sysfs file: /sys/devices/virtual/misc/vboxdrv/uevent
[  644.328501] Modules linked in: vboxdrv(+) isofs udf nls_utf8 nls_cp437 vfat fat ppdev lp sco bridge stp bnep rfcomm l2cap bluetooth acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative binfmt_misc fuse loop snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm_oss snd_mixer_oss ecb snd_pcm snd_seq_midi rtl8180 snd_rawmidi mac80211 snd_seq_midi_event eeprom_93cx6 snd_seq cfg80211 snd_timer pcspkr rng_core snd_seq_device rfkill i915 parport_pc drm_kms_helper parport snd drm asus_atk0110 i2c_algo_bit evdev i2c_i801 video soundcore snd_page_alloc output button i2c_core tpm_tis tpm psmouse processor serio_raw tpm_bios ext4 mbcache jbd2 crc16 usb_storage sg sr_mod cdrom sd_mod crc_t10dif ata_generic ohci_hcd uhci_hcd ata_piix thermal thermal_sys floppy ehci_hcd firewire_ohci firewire_core crc_itu_t atl1 mii libata scsi_mod usbcore nls_base [last unloaded: vboxdrv]
[  644.328501] 
[  644.328501] Pid: 5263, comm: modprobe Not tainted (2.6.32-5-686 #1) System Product Name
[  644.328501] EIP: 0060:[<c108a321>] EFLAGS: 00010246 CPU: 1
[  644.328501] EIP is at zone_watermark_ok+0x5c/0x9d
[  644.328501] EAX: 2e8c7601 EBX: c11af5c7 ECX: 00000000 EDX: 2079c085
[  644.328501] ESI: 00000000 EDI: 00000000 EBP: 5356c789 ESP: f5d61de0
[  644.328501]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  644.328501] Process modprobe (pid: 5263, ti=f5d60000 task=f5adf2c0 task.ti=f5d60000)
[  644.328501] Stack:
[  644.328501]  00000086 2079c085 000000c1 f5d61e18 f5d61e50 00000000 000240d0 00001000
[  644.328501] <0> c108be28 2e8c7601 00000041 c102dba3 00000000 00000000 2e8c7601 00000000
[  644.328501] <0> 00000000 000240d0 c13b132c c1001f10 c3105d60 00000001 f6fd2674 f6fd266c
[  644.328501] Call Trace:
[  644.328501]  [<c108be28>] ? get_page_from_freelist+0xc0/0x3c7
[  644.328501]  [<c102dba3>] ? default_wake_function+0x0/0x8
[  644.328501]  [<c1001f10>] ? __switch_to+0xcf/0x141
[  644.328501]  [<c11af5c7>] ? pci_hp_diva_setup+0x0/0x6b
[  644.328501]  [<c108c3f0>] ? __alloc_pages_nodemask+0xf3/0x4e0
[  644.328501]  [<c11af5c7>] ? pci_hp_diva_setup+0x0/0x6b
[  644.328501]  [<f94897aa>] ? RTMemAllocZ+0x14/0x41 [vboxdrv]
[  644.328501]  [<c11af5c7>] ? pci_hp_diva_setup+0x0/0x6b
[  644.328501]  [<f948b3a2>] ? rtR0MemObjLinuxAllocPages+0x74/0x166 [vboxdrv]
[  644.328501]  [<f948b706>] ? rtR0MemObjNativeAllocLow+0x24/0x5b [vboxdrv]
[  644.328501]  [<f948ae2c>] ? rtR0MemAlloc+0x29/0x49 [vboxdrv]
[  644.328501]  [<f9488c61>] ? supdrvInitDevExt+0x84/0x5e3 [vboxdrv]
[  644.328501]  [<c10aedf5>] ? __kmalloc+0x11c/0x128
[  644.328501]  [<f948ae2c>] ? rtR0MemAlloc+0x29/0x49 [vboxdrv]
[  644.328501]  [<f94a5000>] ? VBoxDrvLinuxInit+0x0/0xc7 [vboxdrv]
[  644.328501]  [<f948ae2c>] ? rtR0MemAlloc+0x29/0x49 [vboxdrv]
[  644.328501]  [<f94896db>] ? RTMemAlloc+0xb/0x18 [vboxdrv]
[  644.328501]  [<f948ca72>] ? RTSpinlockCreate+0x7/0x29 [vboxdrv]
[  644.328501]  [<f94a5000>] ? VBoxDrvLinuxInit+0x0/0xc7 [vboxdrv]
[  644.328501]  [<f94a5050>] ? VBoxDrvLinuxInit+0x50/0xc7 [vboxdrv]
[  644.328501]  [<c100113e>] ? do_one_initcall+0x55/0x155
[  644.328501]  [<c1057dd9>] ? sys_init_module+0xa7/0x1d7
[  644.328501]  [<c10030fb>] ? sysenter_do_call+0x12/0x28
[  644.328501] Code: c6 20 00 00 00 74 0f 89 e8 b9 02 00 00 00 99 f7 f9 89 04 24 29 c5 83 e6 10 74 0c 89 e8 be 04 00 00 00 99 f7 fe 29 c5 8b 44 24 24 <8b> 4c 83 0c 8d 44 0d 00 39 44 24 04 76 29 8b 74 24 04 31 d2 eb 
[  644.328501] EIP: [<c108a321>] zone_watermark_ok+0x5c/0x9d SS:ESP 0068:f5d61de0
[  644.328501] CR2: 000000007b4ccdd7
[  644.328938] ---[ end trace 7f1709795d6b24c7 ]---
lleiria@pc-principal ~ $ modprobe vboxdrv failed. Please use 'dmesg' to find out why ... failed!
What now? I think I'm advancing, but what is the next step?
Thanks once again!
Image

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

Hm, according to the first output vbox kernel modules are created and loaded. After/durring the installation process of vbox it fails (maybe because it's already loaded) and some kind of dump is created. Issue seems to start here

Code: Select all

[  644.328485] BUG: unable to handle kernel paging request at 7b4ccdd7
Is this error reproduceable? Did you try to reboot after installation of vbox? Did you leave the 'return' removed from the beginning of /etc/init.d/vboxdrv?

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

Yes, i left the 'return' removed, and I tried do run virtualbox despite the error on the install. This was stupid, because froze the computer completely, and I had to reboot with the power button. Result: back to the "Cannot unload module vboxdrv ... failed!" message. But I'm patient.
Ideas?
Image

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

You could retry the steps you did before the (re)install without uninstalling vbox

The other method I still have in my mind would be a bit more radical :mrgreen:

lleiria
Level 2
Level 2
Posts: 63
Joined: Sun Nov 07, 2010 2:07 pm

Re: Problems with virtualbox

Post by lleiria »

dfx,
It worked!!! Never thought I would be so happy to see old XP starting... on virtualbox, of course!
Everything is working fine now, I even updated guest additions...
You are really a good person!Thanks a lot for your patience. I love this community .
Just for curiosity, what would be the radical alternative?
And how do I edit the thread to put [SOLVED] on it?
Image

dfx
Level 1
Level 1
Posts: 34
Joined: Sun Nov 14, 2010 12:35 pm

Re: Problems with virtualbox

Post by dfx »

Hi lleiria,

I'm glad that it's finally working and I could help you

The alternative would have been to completly uninstall virtualbox with

Code: Select all

aptitude purge virtualbox-3.2
and install it again afterwards. This solution also deletes all the settings and virtual machines you have. So it's important to create a backup of the .virtualbox folder in your home directory where this files normally reside

Changing the topic should be possible by editing your first post here and adapt the subject

Locked

Return to “LMDE Archive”