I had a Logitech USB mouse plugged in through a USB/PS2 adapter, it was OK, scrolling was slow, but suspend worked. I swapped it for a Logitech B100 USB mouse in the USB port, scrolling is much better, but suspend/hibernate do not work (it resumes immediately). Is there a way to suspend the mouse?
Suspends OK if I unplug mouse and pm-suspend.
Code: Select all
System: Host: lmde2-64 Kernel: 3.16.0-4-amd64 x86_64 (64 bit gcc: 4.8.4)
Desktop: MATE 1.10.0 (Gtk 3.14.5+4) Distro: LinuxMint 2 betsy
Machine: Mobo: ASUSTek model: M2NPV-VM v: 1.xx
Bios: Phoenix v: ASUS M2NPV-VM 1401 date: 08/07/2008
CPU: Single core AMD Athlon 64 3500+ (-UP-) cache: 512 KB
flags: (lm nx sse sse2 sse3 svm) bmips: 2004 clocked at 1000 MHz
Graphics: Card: NVIDIA C51PV [GeForce 6150] bus-ID: 00:05.0
Display Server: X.Org 1.16.4 driver: nvidia
Resolution: 1280x1024@60.02hz
GLX Renderer: GeForce 6150/integrated/SSE2
GLX Version: 2.1.2 NVIDIA 304.125 Direct Rendering: Yes
Audio: Card NVIDIA MCP51 High Definition Audio
driver: snd_hda_intel bus-ID: 00:10.1
Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network: Card: NVIDIA MCP51 Ethernet Controller
driver: forcedeth port: c800 bus-ID: 00:14.0
IF: eth0 state: up speed: 100 Mbps duplex: full
mac: 00:17:31:85:3f:8a
Drives: HDD Total Size: 500.1GB (2.6% used)
ID-1: /dev/sda model: ST500DM002 size: 500.1GB
Partition: ID-1: / size: 16G used: 5.6G (38%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 440G used: 3.6G (1%) fs: ext4 dev: /dev/sda2
ID-3: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
Sensors: System Temperatures: cpu: 23.0C mobo: 30.0C gpu: 0.0:
Fan Speeds (in rpm): cpu: 2909 sys-1: 2122
Info: Processes: 220 Uptime: 2:43 Memory: 806.4/2987.3MB
Init: SysVinit runlevel: 2 Gcc sys: 4.9.2
Client: Shell (bash 4.3.301) inxi: 2.1.28
Any suggestions?