I formatted the entire HD and replaced it with a dual boot consisting of windows 8.1 and LMDE-2.
My problem is that LMDE 2 won't offer me the mobo on-board analog 5.1 sound. It detects the s/pdif and the hdmiport. It also detects my external soundcard (for which I have no cables...). I then tried it in windows and the strange thing is that it wouldn't play it there either. After scratching my head, complaining about everything bad in the world and reading up on forums I inserted the old LinuxMintcinnamon14 live CD and it works like a charm so what is the problem here? Is it some driver Betsy is missing or what?
Does anybody have a suggestion about what I can do to get it working?
This is what I found using lscpi -v on Betsy2.
Code: Select all
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series]
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: snd_hda_intel
03:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. M-Audio Delta 66
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at ec00 [size=32]
I/O ports at e880 [size=16]
I/O ports at e800 [size=16]
I/O ports at e480 [size=64]
Capabilities: [80] Power Management version 1
Kernel driver in use: snd_ice1712
Code: Select all
mint@mint ~ $ sudo lspci -v
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
Subsystem: ASUSTeK Computer Inc. Device 83a2
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:01.0 PCI bridge: ASUSTeK Computer Inc. RS880 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Kernel modules: shpchp
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 83a2
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at b000 [size=8]
I/O ports at a000 [size=4]
I/O ports at 9000 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7000 [size=16]
Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA v1.0
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: 66MHz, medium devsel
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel modules: sp5100_tco, i2c-piix4
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8389
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe7fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
Flags: fast devsel
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at c000 [size=256]
Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: radeon
Kernel modules: radeon
01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 41
I/O ports at d800 [size=256]
Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
03:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. M-Audio Delta 66
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at ec00 [size=32]
I/O ports at e880 [size=16]
I/O ports at e800 [size=16]
I/O ports at e480 [size=64]
Capabilities: [80] Power Management version 1
Kernel driver in use: snd_ice1712
Kernel modules: snd-ice1712
03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at febff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at e400 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
It seems to my eye that both systems use the the same drivers. A strange thing that occured when I was trying the Mint14 just now was that in that system the hdmiport soes not output any sound so it's a similar problem but the other way around.
Betsy 2 does not list analogport at all. Mint14 Lists all ports but does not output sound on hdmi.
Since both ports are on the mobo using what I understand is the same kernel, could there be a conflict here?
Anyway, I really would like to use Debian instead of Ubuntu so I'll be most thankful for all suggestions.
/Anders
As you can see it contains the analog output that is missing on LMDE 2 below.