Power Management when running on battery

Questions about hardware and drivers
Forum rules
Before you post please read how to get help
User avatar
ulli_m16
Level 1
Level 1
Posts: 27
Joined: Thu Feb 09, 2017 6:00 am

Power Management when running on battery

Postby ulli_m16 » Tue Feb 14, 2017 5:33 am

I am missing settings for power management when running on battery.
All I got is this indicator about how much power (%) is left. But no warning can be set (or is preset) when the battery drops below a certain value say 10% or what.
The device simply turns of when the battery is (almost) empty. It seems this happens prior to the battery being totally empty.

Is there an additional tool to be installed?
... anybody around there who also owns a fully operational "Northstar Advantage" running with CP/M 2.2?

deepakdeshp
Level 9
Level 9
Posts: 2524
Joined: Sun Aug 09, 2015 10:00 am

Re: Power Management when running on battery

Postby deepakdeshp » Tue Feb 14, 2017 6:14 am

To know more about your system paste output of command

Code: Select all

inxi -Fxz
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help, and keeps the forum clean.
I am using Mint 18.3 Cinnamon 64 bit with AMD processor . Memory 8GB

User avatar
ulli_m16
Level 1
Level 1
Posts: 27
Joined: Thu Feb 09, 2017 6:00 am

Re: Power Management when running on battery

Postby ulli_m16 » Tue Feb 21, 2017 3:00 am

Sorry I did not get back to you earlier. I was running into an issue with Cinnamon on this box I concentrated on.
Following the output of the command

System: Host: nb03_hp5103 Kernel: 3.16.0-4-amd64 x86_64 (64 bit gcc: 4.8.4)
Desktop: Cinnamon 3.2.7 (Gtk 3.14.5+4) Distro: LinuxMint 2 betsy
Machine: System: Hewlett-Packard product: HP Mini 5103
Mobo: Hewlett-Packard model: 1608 v: KBC Version 92.05
Bios: Hewlett-Packard v: 68PGP Ver. F.03 date: 01/06/2011
CPU: Dual core Intel Atom N550 (-HT-MCP-) cache: 512 KB
flags: (lm nx sse sse2 sse3 ssse3) bmips: 5985
Clock Speeds: 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHz
Graphics: Card: Intel Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
bus-ID: 00:02.0
Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1366x768@60.03hz
GLX Renderer: Mesa DRI Intel IGD
GLX Version: 2.1 Mesa 10.3.2 Direct Rendering: Yes
Audio: Card Intel NM10/ICH7 Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network: Card-1: Broadcom BCM43224 802.11a/b/g/n driver: wl bus-ID: 01:00.0
IF: wlan0 state: up mac: <filter>
Card-2: Marvell Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB]
driver: sky2 v: 1.30 port: 2000 bus-ID: 02:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 500.1GB (2.2% used)
ID-1: /dev/sda model: ST9500420AS size: 500.1GB
Partition: ID-1: / size: 31G used: 5.4G (19%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 374G used: 288M (1%) fs: ext4 dev: /dev/sda3
ID-3: swap-1 size: 5.03GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
Sensors: System Temperatures: cpu: 49.0C mobo: 33.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 164 Uptime: 11 min Memory: 749.7/1991.5MB
Init: SysVinit runlevel: 2 Gcc sys: 4.9.2
Client: Shell (bash 4.3.301) inxi: 2.1.28
... anybody around there who also owns a fully operational "Northstar Advantage" running with CP/M 2.2?


Return to “Hardware Support”