Proper install of driver

Questions about networking
Forum rules
Before you post please read this
Post Reply
Level 1
Level 1
Posts: 1
Joined: Fri Sep 25, 2015 2:01 pm

Proper install of driver

Post by Rufusthedog » Fri Sep 25, 2015 2:14 pm


I installed the Debian edition on a USB thumb drive but it is not recognizing my wifi. Since it doesn't even appear on the list of networks (I only get the wired option) I assume that this is a driver problem. So I ran inix -nz and it says that I have a Broadcom BCM 4322. My issue is that I cannot simply run apt-get because I have no wired LAN connection--I'm wifi only. ... -installer

Is the correct firmware update. (I'm assuming jessie and not wheezy).

Can some walk we through the steps I need to do? For example, are all the dependencies already on Mint or do those have to be downloaded too?
Last edited by karlchen on Fri Sep 25, 2015 7:51 pm, edited 1 time in total.
Reason: "Debian edition" => Moved thread from "Main Edition" - "Hardware Support" to "LMDE 2" - "Hardware Support"

Level 1
Level 1
Posts: 11
Joined: Tue Mar 17, 2015 4:25 pm

Re: Proper install of driver

Post by pioruns » Thu Feb 25, 2016 2:43 pm

Determine what architecture you have, i386 or AMD64. Download appropriate .deb files for packages:

Code: Select all

Once you got them, install them with command:

Code: Select all

sudo dpkg -i firmware-b43-installer_019-2_all.deb b43-fwcutter_019-2_amd64.deb
Make sure you put correct filename for b43-fwcutter in the line above, it will be different if you have i386 architecture.
If you encounter any problems, please paste your terminal output here or upload a photo.
System: LMDE AMD64
Hardware: HP ProBook 4545s
SanDisk SSD PLUS 240GB

Post Reply

Return to “Networking”