Resolution at 1920x1080 screen isn't centered

Quick to answer questions about finding your way around LMDE as a new user.
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help
Post Reply
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello.

Yesterday i installed LMDE and after changeing the resolution to from 1024x768 to 1920x1080 the screen is to the left 7 pixels and 4 pixels up (according to my monitor settings)

At 1024x768 works just fine.

my hardware information is

Code: Select all

rah-rah@rah-rah-dev3:~$ inxi -Fxz
System:
  Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  Desktop: Cinnamon 5.2.7 Distro: LMDE 5 Elsie base: Debian 11.2 bullseye 
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8H61-M LX R2.0 v: Rev X.0x 
  serial: <filter> BIOS: American Megatrends v: 0702 date: 09/11/2012 
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 
  charge: 55% (should be ignored) status: Discharging 
CPU:
  Info: Dual Core model: Intel Core i3-3220 bits: 64 type: MT MCP 
  arch: Ivy Bridge rev: 9 L2 cache: 3 MiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26341 
  Speed: 1597 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 1597 2: 1597 
  3: 1596 4: 1597 
Graphics:
  Device-1: AMD RV710 [Radeon HD 4350/4550] vendor: ASUSTeK driver: radeon 
  v: kernel bus ID: 01:00.0 
  Display: x11 server: X.Org 1.20.11 driver: loaded: ati,radeon 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: AMD RV710 (DRM 2.50.0 / 5.10.0-16-amd64 LLVM 11.0.1) 
  v: 3.3 Mesa 20.3.5 direct render: Yes 
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio 
  vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  Sound Server: ALSA v: k5.10.0-16-amd64 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK P8 series driver: r8169 v: kernel port: d000 
  bus ID: 04:00.0 
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 298.09 GiB used: 10.21 GiB (3.4%) 
  ID-1: /dev/sdb vendor: Western Digital model: WD3200BPVT-24JJ5T0 
  size: 298.09 GiB 
Partition:
  ID-1: / size: 283.75 GiB used: 10.21 GiB (3.6%) fs: ext4 dev: /dev/dm-0 
  mapped: lvmlmde-root 
Swap:
  ID-1: swap-1 type: partition size: 7.73 GiB used: 0 KiB (0.0%) 
  dev: /dev/dm-1 mapped: lvmlmde-swap 
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 48.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 198 Uptime: 10m Memory: 7.73 GiB used: 1.43 GiB (18.5%) 
  Init: systemd runlevel: 5 Compilers: gcc: 10.2.1 Packages: 2053 
  Shell: Bash v: 5.1.4 inxi: 3.3.01
My xorg.conf is:

Code: Select all

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
# Identifier "Monitor0"
Identifier "VGA-0"
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
VendorName "ASUS"
ModelName "VS247H"
Option "PreferredMode" "1920x1080_60.00"
EndSection
I also have the ubuntu based linux mint installed on another pc with this configuration for the xorg.conf and don't have this issue (with this monitor) with another graphics card.

Also to note that i had the linux peppermint debian based and detected the graphics card and changed to 1920x1080 automatically and with no issues

Code: Select all

       _,met$$$$$gg.          rah-rah@rah-rah-dev3 
    ,g$$$$$$$$$$$$$$$P.       -------------------- 
  ,g$$P"     """Y$$.".        OS: Debian GNU/Linux 11 (bullseye) x86_64 
 ,$$P'              `$$$.     Kernel: 5.10.0-16-amd64 
',$$P       ,ggs.     `$$b:   Uptime: 2 mins 
`d$$'     ,$P"'   .    $$$    Packages: 1697 (dpkg) 
 $$P      d$'     ,    $$P    Shell: bash 5.1.4 
 $$:      $$.   -    ,d$$'    Resolution: 1920x1080 
 $$;      Y$b._   _,d$P'      DE: Xfce 4.16 
 Y$$.    `.`"Y$$$$P"'         WM: Xfwm4 
 `$$b      "-.__              WM Theme: Default 
  `Y$$                        Theme: Arc-Lighter [GTK2/3] 
   `Y$$.                      Icons: Numix [GTK2/3] 
     `$$b.                    Terminal: xfce4-terminal 
       `Y$$b.                 Terminal Font: Monospace 10 
          `"Y$b._             CPU: Intel i3-3220 (4) @ 3.300GHz 
              `"""            GPU: AMD ATI Radeon HD 4350/4550 
                              Memory: 499MiB / 7914MiB 

##################################

`.-::---..                     rah-rah@rah-rah-dev3 
      .:++++ooooosssoo:.       -------------------- 
    .+o++::.      `.:oos+.     OS: LMDE 5 (elsie) x86_64 
   :oo:.`             -+oo:    Kernel: 5.10.0-16-amd64 
 `+o/`    .::::::-.    .++-`   Uptime: 25 mins 
`/s/    .yyyyyyyyyyo:   +o-`   Packages: 2053 (dpkg) 
`so     .ss       ohyo` :s-:   Shell: bash 5.1.4 
`s/     .ss  h  m  myy/ /s``   Resolution: 1920x1080 
`s:     `oo  s  m  Myy+-o:`    DE: Cinnamon 5.2.7 
`oo      :+sdoohyoydyso/.      WM: Mutter (Muffin) 
 :o.      .:////////++:        WM Theme: Mint-Y-Sand (Mint-Y) 
 `/++        -:::::-           Theme: Mint-Y-Sand [GTK2/3] 
  `++-                         Icons: Mint-Y-Dark-Yellow [GTK2/3] 
   `/+-                        Terminal: gnome-terminal 
     .+/.                      CPU: Intel i3-3220 (4) @ 3.300GHz 
       .:+-.                   GPU: AMD ATI Radeon HD 4350/4550 
          `--.``               Memory: 1416MiB / 7914MiB 
                                                   
rah-rah@rah-rah-dev3:~$ 


Thank you.
Last edited by SMG on Thu Aug 04, 2022 7:07 pm, edited 1 time in total.
Reason: Changed quote tags to code tags to retain the proper formatting. Please use code tags for terminal output.
MiZoG
Level 3
Level 3
Posts: 172
Joined: Fri Jan 26, 2018 8:30 pm

Re: Resolution at 1920x1080 screen isn't centered

Post by MiZoG »

Has your monitor the option to "reset to defaults" or can you adjust the placement of the screen there in your monitor settings?
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello.

My monitor does have the reset to default, but remains the same.
Yes i can adjust the position, but when i turn on the screen it does the auto adjust...

I've noticed when i use 1024x768 works at 60.00hz, but when i switch to 1920x1080 uses 59.96hz Recommended VSync

I have no idea where i check to use VSync or it is automatic.

Thank you.
User avatar
JerryF
Level 15
Level 15
Posts: 5659
Joined: Mon Jun 08, 2015 1:23 pm
Location: Rhode Island, USA

Re: Resolution at 1920x1080 screen isn't centered

Post by JerryF »

In the future, could you please use the code tags instead of the quote tags? It makes it so much easier to read the output of Terminal commands.

The code tag button is the one immediately to the right of the quote tag button.

</>

Thanks.
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hi.

I am ware instead i used
.

Noted, future post/replies will contain Thank you for the heads up.
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello

Today the problem spread to 1024x768 resolution as well...
User avatar
Termy
Level 9
Level 9
Posts: 2698
Joined: Mon Sep 04, 2017 8:49 pm
Location: UK
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Termy »

Not sure why that's happening, other than your hardware is perhaps not officially or fully supported in Linux. However, there might be an option in your monitor's settings to disable autoadjustments.
I'm also Terminalforlife on GitHub.
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello.

There is no option to turn off the auto adjust.

The problem doesn't reside with the monitor, because i used on my other computer with Mint Ubuntu based without a problem.
Sure the graphics card was a

Code: Select all

Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240/340] vendor: Gigabyte driver: radeon v: kernel
bus ID: 01:00.0 chip ID: 1002:6613
Display: x11 server: X.Org 1.20.9 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD OLAND (DRM 2.50.0 5.4.0-73-generic LLVM 12.0.0) v: 4.5 Mesa 21.1.1 - kisak-mesa PPA
direct render: Yes
As i said above before installing Mint Elsie i had Peppermint 11 (i think) and after installing the card auto switch to 1920x1080 without this problem. Noted this version of Peppermint ditched Ubuntu for Debian

Code: Select all

OS: Debian GNU/Linux 11 (bullseye) x86_64  Kernel: 5.10.0-16-amd64 
If can't find a solution i'll go back to Peppermint or Mint Ubuntu based or find something else

The funny thing is that both are based on Debian, i'll try the windows manager on Mint to exclude...
MiZoG
Level 3
Level 3
Posts: 172
Joined: Fri Jan 26, 2018 8:30 pm

Re: Resolution at 1920x1080 screen isn't centered

Post by MiZoG »

Post the result of xrandr here
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

MiZoG wrote:
Fri Aug 05, 2022 6:12 pm
Post the result of xrandr here

Code: Select all

rah-rah@rah-rah-dev3:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
VGA-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1080_60.00  59.96*+
   1024x768      60.00  
   800x600       60.32    56.25  
   848x480       60.00  
   640x480       59.94  
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)

MiZoG
Level 3
Level 3
Posts: 172
Joined: Fri Jan 26, 2018 8:30 pm

Re: Resolution at 1920x1080 screen isn't centered

Post by MiZoG »

VGA cable? I bet the Radeon is too old to have a HDMI port. You certainly mentioned that Peppermint worked on this same machine though.
60hz mode is recognized by the driver. Try to force it.

xrandr --output VGA-0 --mode 1920x1080 --rate 60

If that somehow solves the problem, we'll have to look for a way to make the setting permanent.
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello!

The card is a EAH4350 SILENT/DI/256D2(LP) <GA>

Code: Select all

https://icecat.biz/en-za/p/asus/eah4350+silent-di-256md2-lp/graphics+cards-eah4350+silent-di-256md2-lp-3935219.html
don't know how old is it. VGA/HDMI/DVI ports.

Code: Select all

rah-rah@rah-rah-dev3:~$  xrandr --output VGA-0 --mode 1920x1080 --rate 60
xrandr: cannot find mode 1920x1080
Mint says 59.96hz recommended vsync
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

Hello

Using Peppermint Devuan live i still have the same problem, however 800x600 at 56.2 Hz the screen is just fine, but at 60.3 Hz the screen is displaced.

56.2 Hz

Code: Select all

peplive@PepOS-Live:~$ xrandr
Screen 0: minimum 320 x 200, current 800 x 600, maximum 8192 x 8192
VGA-0 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1080_60.00  59.96 +
   1024x768      60.00  
   800x600       60.32    56.25* 
   848x480       60.00  
   640x480       59.94  
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
peplive@PepOS-Live:~$ 
60.3 Hz

Code: Select all

peplive@PepOS-Live:~$ xrandr
Screen 0: minimum 320 x 200, current 800 x 600, maximum 8192 x 8192
VGA-0 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1080_60.00  59.96 +
   1024x768      60.00  
   800x600       60.32*   56.25  
   848x480       60.00  
   640x480       59.94  
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
User avatar
cpedretti
Level 3
Level 3
Posts: 169
Joined: Tue Mar 10, 2020 12:06 am

Re: Resolution at 1920x1080 screen isn't centered

Post by cpedretti »

Rah-Rah wrote:
Thu Aug 04, 2022 9:44 am
Hello.

Yesterday i installed LMDE and after changeing the resolution to from 1024x768 to 1920x1080 the screen is to the left 7 pixels and 4 pixels up (according to my monitor settings)

At 1024x768 works just fine.

my hardware information is

Code: Select all

rah-rah@rah-rah-dev3:~$ inxi -Fxz
System:
  Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  Desktop: Cinnamon 5.2.7 Distro: LMDE 5 Elsie base: Debian 11.2 bullseye 
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8H61-M LX R2.0 v: Rev X.0x 
  serial: <filter> BIOS: American Megatrends v: 0702 date: 09/11/2012 
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 
  charge: 55% (should be ignored) status: Discharging 
CPU:
  Info: Dual Core model: Intel Core i3-3220 bits: 64 type: MT MCP 
  arch: Ivy Bridge rev: 9 L2 cache: 3 MiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26341 
  Speed: 1597 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 1597 2: 1597 
  3: 1596 4: 1597 
Graphics:
  Device-1: AMD RV710 [Radeon HD 4350/4550] vendor: ASUSTeK driver: radeon 
  v: kernel bus ID: 01:00.0 
  Display: x11 server: X.Org 1.20.11 driver: loaded: ati,radeon 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: AMD RV710 (DRM 2.50.0 / 5.10.0-16-amd64 LLVM 11.0.1) 
  v: 3.3 Mesa 20.3.5 direct render: Yes 
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio 
  vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  Sound Server: ALSA v: k5.10.0-16-amd64 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK P8 series driver: r8169 v: kernel port: d000 
  bus ID: 04:00.0 
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 298.09 GiB used: 10.21 GiB (3.4%) 
  ID-1: /dev/sdb vendor: Western Digital model: WD3200BPVT-24JJ5T0 
  size: 298.09 GiB 
Partition:
  ID-1: / size: 283.75 GiB used: 10.21 GiB (3.6%) fs: ext4 dev: /dev/dm-0 
  mapped: lvmlmde-root 
Swap:
  ID-1: swap-1 type: partition size: 7.73 GiB used: 0 KiB (0.0%) 
  dev: /dev/dm-1 mapped: lvmlmde-swap 
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 48.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 198 Uptime: 10m Memory: 7.73 GiB used: 1.43 GiB (18.5%) 
  Init: systemd runlevel: 5 Compilers: gcc: 10.2.1 Packages: 2053 
  Shell: Bash v: 5.1.4 inxi: 3.3.01
My xorg.conf is:

Code: Select all

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
# Identifier "Monitor0"
Identifier "VGA-0"
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
VendorName "ASUS"
ModelName "VS247H"
Option "PreferredMode" "1920x1080_60.00"
EndSection
I also have the ubuntu based linux mint installed on another pc with this configuration for the xorg.conf and don't have this issue (with this monitor) with another graphics card.

Also to note that i had the linux peppermint debian based and detected the graphics card and changed to 1920x1080 automatically and with no issues

Code: Select all

       _,met$$$$$gg.          rah-rah@rah-rah-dev3 
    ,g$$$$$$$$$$$$$$$P.       -------------------- 
  ,g$$P"     """Y$$.".        OS: Debian GNU/Linux 11 (bullseye) x86_64 
 ,$$P'              `$$$.     Kernel: 5.10.0-16-amd64 
',$$P       ,ggs.     `$$b:   Uptime: 2 mins 
`d$$'     ,$P"'   .    $$$    Packages: 1697 (dpkg) 
 $$P      d$'     ,    $$P    Shell: bash 5.1.4 
 $$:      $$.   -    ,d$$'    Resolution: 1920x1080 
 $$;      Y$b._   _,d$P'      DE: Xfce 4.16 
 Y$$.    `.`"Y$$$$P"'         WM: Xfwm4 
 `$$b      "-.__              WM Theme: Default 
  `Y$$                        Theme: Arc-Lighter [GTK2/3] 
   `Y$$.                      Icons: Numix [GTK2/3] 
     `$$b.                    Terminal: xfce4-terminal 
       `Y$$b.                 Terminal Font: Monospace 10 
          `"Y$b._             CPU: Intel i3-3220 (4) @ 3.300GHz 
              `"""            GPU: AMD ATI Radeon HD 4350/4550 
                              Memory: 499MiB / 7914MiB 

##################################

`.-::---..                     rah-rah@rah-rah-dev3 
      .:++++ooooosssoo:.       -------------------- 
    .+o++::.      `.:oos+.     OS: LMDE 5 (elsie) x86_64 
   :oo:.`             -+oo:    Kernel: 5.10.0-16-amd64 
 `+o/`    .::::::-.    .++-`   Uptime: 25 mins 
`/s/    .yyyyyyyyyyo:   +o-`   Packages: 2053 (dpkg) 
`so     .ss       ohyo` :s-:   Shell: bash 5.1.4 
`s/     .ss  h  m  myy/ /s``   Resolution: 1920x1080 
`s:     `oo  s  m  Myy+-o:`    DE: Cinnamon 5.2.7 
`oo      :+sdoohyoydyso/.      WM: Mutter (Muffin) 
 :o.      .:////////++:        WM Theme: Mint-Y-Sand (Mint-Y) 
 `/++        -:::::-           Theme: Mint-Y-Sand [GTK2/3] 
  `++-                         Icons: Mint-Y-Dark-Yellow [GTK2/3] 
   `/+-                        Terminal: gnome-terminal 
     .+/.                      CPU: Intel i3-3220 (4) @ 3.300GHz 
       .:+-.                   GPU: AMD ATI Radeon HD 4350/4550 
          `--.``               Memory: 1416MiB / 7914MiB 
                                                   
rah-rah@rah-rah-dev3:~$ 


Thank you.
Have you tried with arandr, the xrandr GUI version?

Code: Select all

sudo apt install arandr -y
Then search arandr in your application and select the right screen parameters :)

Source
AMD Ryzen 7 3700X - 32GB DDR4 - Asus GTX1660TI EVO - SSD SAMSUNG EVO 860 - Mobo Gigabyte AORUS ELITE B550 V2 - PSU Gigabyte 750W Gold - Case Zalman X3 White
LMDE5 / W11
Rah-Rah
Level 2
Level 2
Posts: 60
Joined: Mon Feb 01, 2021 5:27 pm
Location: Portugal
Contact:

Re: Resolution at 1920x1080 screen isn't centered

Post by Rah-Rah »

cpedretti wrote:
Sat Aug 06, 2022 1:56 pm
Rah-Rah wrote:
Thu Aug 04, 2022 9:44 am
Hello.

Yesterday i installed LMDE and after changeing the resolution to from 1024x768 to 1920x1080 the screen is to the left 7 pixels and 4 pixels up (according to my monitor settings)

At 1024x768 works just fine.

my hardware information is

Code: Select all

rah-rah@rah-rah-dev3:~$ inxi -Fxz
System:
  Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  Desktop: Cinnamon 5.2.7 Distro: LMDE 5 Elsie base: Debian 11.2 bullseye 
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8H61-M LX R2.0 v: Rev X.0x 
  serial: <filter> BIOS: American Megatrends v: 0702 date: 09/11/2012 
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 
  charge: 55% (should be ignored) status: Discharging 
CPU:
  Info: Dual Core model: Intel Core i3-3220 bits: 64 type: MT MCP 
  arch: Ivy Bridge rev: 9 L2 cache: 3 MiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26341 
  Speed: 1597 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 1597 2: 1597 
  3: 1596 4: 1597 
Graphics:
  Device-1: AMD RV710 [Radeon HD 4350/4550] vendor: ASUSTeK driver: radeon 
  v: kernel bus ID: 01:00.0 
  Display: x11 server: X.Org 1.20.11 driver: loaded: ati,radeon 
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz 
  OpenGL: renderer: AMD RV710 (DRM 2.50.0 / 5.10.0-16-amd64 LLVM 11.0.1) 
  v: 3.3 Mesa 20.3.5 direct render: Yes 
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio 
  vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  Sound Server: ALSA v: k5.10.0-16-amd64 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK P8 series driver: r8169 v: kernel port: d000 
  bus ID: 04:00.0 
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 298.09 GiB used: 10.21 GiB (3.4%) 
  ID-1: /dev/sdb vendor: Western Digital model: WD3200BPVT-24JJ5T0 
  size: 298.09 GiB 
Partition:
  ID-1: / size: 283.75 GiB used: 10.21 GiB (3.6%) fs: ext4 dev: /dev/dm-0 
  mapped: lvmlmde-root 
Swap:
  ID-1: swap-1 type: partition size: 7.73 GiB used: 0 KiB (0.0%) 
  dev: /dev/dm-1 mapped: lvmlmde-swap 
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 48.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 198 Uptime: 10m Memory: 7.73 GiB used: 1.43 GiB (18.5%) 
  Init: systemd runlevel: 5 Compilers: gcc: 10.2.1 Packages: 2053 
  Shell: Bash v: 5.1.4 inxi: 3.3.01
My xorg.conf is:

Code: Select all

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
# Identifier "Monitor0"
Identifier "VGA-0"
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
VendorName "ASUS"
ModelName "VS247H"
Option "PreferredMode" "1920x1080_60.00"
EndSection
I also have the ubuntu based linux mint installed on another pc with this configuration for the xorg.conf and don't have this issue (with this monitor) with another graphics card.

Also to note that i had the linux peppermint debian based and detected the graphics card and changed to 1920x1080 automatically and with no issues

Code: Select all

       _,met$$$$$gg.          rah-rah@rah-rah-dev3 
    ,g$$$$$$$$$$$$$$$P.       -------------------- 
  ,g$$P"     """Y$$.".        OS: Debian GNU/Linux 11 (bullseye) x86_64 
 ,$$P'              `$$$.     Kernel: 5.10.0-16-amd64 
',$$P       ,ggs.     `$$b:   Uptime: 2 mins 
`d$$'     ,$P"'   .    $$$    Packages: 1697 (dpkg) 
 $$P      d$'     ,    $$P    Shell: bash 5.1.4 
 $$:      $$.   -    ,d$$'    Resolution: 1920x1080 
 $$;      Y$b._   _,d$P'      DE: Xfce 4.16 
 Y$$.    `.`"Y$$$$P"'         WM: Xfwm4 
 `$$b      "-.__              WM Theme: Default 
  `Y$$                        Theme: Arc-Lighter [GTK2/3] 
   `Y$$.                      Icons: Numix [GTK2/3] 
     `$$b.                    Terminal: xfce4-terminal 
       `Y$$b.                 Terminal Font: Monospace 10 
          `"Y$b._             CPU: Intel i3-3220 (4) @ 3.300GHz 
              `"""            GPU: AMD ATI Radeon HD 4350/4550 
                              Memory: 499MiB / 7914MiB 

##################################

`.-::---..                     rah-rah@rah-rah-dev3 
      .:++++ooooosssoo:.       -------------------- 
    .+o++::.      `.:oos+.     OS: LMDE 5 (elsie) x86_64 
   :oo:.`             -+oo:    Kernel: 5.10.0-16-amd64 
 `+o/`    .::::::-.    .++-`   Uptime: 25 mins 
`/s/    .yyyyyyyyyyo:   +o-`   Packages: 2053 (dpkg) 
`so     .ss       ohyo` :s-:   Shell: bash 5.1.4 
`s/     .ss  h  m  myy/ /s``   Resolution: 1920x1080 
`s:     `oo  s  m  Myy+-o:`    DE: Cinnamon 5.2.7 
`oo      :+sdoohyoydyso/.      WM: Mutter (Muffin) 
 :o.      .:////////++:        WM Theme: Mint-Y-Sand (Mint-Y) 
 `/++        -:::::-           Theme: Mint-Y-Sand [GTK2/3] 
  `++-                         Icons: Mint-Y-Dark-Yellow [GTK2/3] 
   `/+-                        Terminal: gnome-terminal 
     .+/.                      CPU: Intel i3-3220 (4) @ 3.300GHz 
       .:+-.                   GPU: AMD ATI Radeon HD 4350/4550 
          `--.``               Memory: 1416MiB / 7914MiB 
                                                   
rah-rah@rah-rah-dev3:~$ 


Thank you.
Have you tried with arandr, the xrandr GUI version?

Code: Select all

sudo apt install arandr -y
Then search arandr in your application and select the right screen parameters :)

Source
Hello.

I wasn't ware that existed a graphical version, thank you, it wasn't a total lost.

Manage to change resolutions, but didn't fix the problem. for now i'm at 800x600 (4:3) at 56.25 Hz
Post Reply

Return to “Beginner Questions”