Booting Problems: I'm getting this message (updated)

Questions about Grub, the liveCD and the installer
Forum rules
Before you post please read how to get help
Post Reply
manuel7
Level 1
Level 1
Posts: 12
Joined: Fri Jul 12, 2019 1:19 pm

Booting Problems: I'm getting this message (updated)

Post by manuel7 » Thu Nov 28, 2019 12:39 pm

I NEED YOUR HELP

I'm getting this message when LMDE 3 is booting.

[ 0.844915] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.844956] [Firmware Bug]: cpu 0, IBS interrupt offser 0 not availabke (MSR 001103A=0x0000000000000100)
[ 11.231897] ata5: SRST failed (errno =-16)
[ 21.235719] ata5: SRST failed (errno =-16)
[ 57.527075] ata5: SRST failed (errno =-16)
[ 93.622435] ata5: SRST failed (errno =-16)
modprobe: module dm-raid45 not found in modules.dep


Info:

Code: Select all

System:    Host:  Kernel: 4.9.0-11-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: Cinnamon 4.2.4 
           Distro: LMDE 3 Cindy base: Debian 9.3 stretch 
Machine:   Type: Desktop Mobo: ASRock model: N68-VGS3 FX serial: <filter> BIOS: American Megatrends v: P1.70 date: 10/31/2012 
CPU:       Topology: Single Core model: AMD Sempron 145 bits: 64 type: UP arch: K10 rev: 3 L2 cache: 1024 KiB 
           flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 5625 
           Speed: 2800 MHz min/max: 800/2800 MHz Core speed (MHz): 1: 2800 
Graphics:  Device-1: NVIDIA C61 [GeForce 7025 / nForce 630a] vendor: ASRock driver: nvidia v: 304.137 bus ID: 00:0d.0 
           Display: x11 server: X.Org 1.19.2 driver: nvidia resolution: 1368x768~60Hz 
           OpenGL: renderer: GeForce 7025 / nForce 630a/integrated/SSE2 v: 2.1.2 NVIDIA 304.137 direct render: Yes 
Audio:     Device-1: NVIDIA MCP61 High Definition Audio vendor: ASRock driver: snd_hda_intel v: kernel bus ID: 00:05.0 
           Sound Server: ALSA v: k4.9.0-11-amd64 
Network:   Device-1: NVIDIA MCP61 Ethernet vendor: ASRock 939NF6G-VSTA Board type: network bridge driver: forcedeth v: kernel 
           port: e080 bus ID: 00:07.0 
           IF: enp0s7 state: down mac: <filter> 
           Device-2: Ralink RT3072 Wireless Adapter type: USB driver: rt2800usb bus ID: 1-2:3 
           IF: wlxc83a35c6713b state: up mac: <filter> 
Drives:    Local Storage: total: 149.05 GiB used: 49.13 GiB (33.0%) 
           ID-1: /dev/sda vendor: Samsung model: HD161GJ size: 149.05 GiB 
Partition: ID-1: / size: 140.38 GiB used: 49.04 GiB (34.9%) fs: ext4 dev: /dev/sda3 
           ID-2: /boot size: 282.5 MiB used: 93.5 MiB (33.1%) fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 5.12 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 38.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 177 Uptime: 5m Memory: 3.62 GiB used: 1.08 GiB (29.8%) Init: systemd runlevel: 5 Compilers: gcc: 6.3.0 
           Shell: bash v: 4.4.12 inxi: 3.0.32 



Thanks!
Last edited by manuel7 on Mon Dec 02, 2019 6:44 pm, edited 5 times in total.

deepakdeshp
Level 16
Level 16
Posts: 6284
Joined: Sun Aug 09, 2015 10:00 am

Re: BOOTING PROBLEMS

Post by deepakdeshp » Thu Nov 28, 2019 12:41 pm

Incomplete help request. Please read how to ask for help in the forum.
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help, and keeps the forum clean.
Regards,
Deepak

I am using Mint 19.2 Cinnamon 64 bit with AMD A8/7410 processor . Memory 8GB

User avatar
sdibaja
Level 5
Level 5
Posts: 705
Joined: Sun May 08, 2011 12:57 pm
Location: Baja California, Mexico

Re: BOOTING PROBLEMS

Post by sdibaja » Thu Nov 28, 2019 2:58 pm

manuel7 wrote:
Thu Nov 28, 2019 12:39 pm
I NEED YOUR HELP

I'm getting this message when LMDE 3 is booting.

Thanks!
what is the message?
Peter
Mate desktop https://mate-desktop.org/
Debian GNU/Linux operating system: https://cdimage.debian.org/images/unoff ... -firmware/

manuel7
Level 1
Level 1
Posts: 12
Joined: Fri Jul 12, 2019 1:19 pm

Re: BOOTING PROBLEMS

Post by manuel7 » Sun Dec 01, 2019 11:28 pm

sdibaja wrote:
Thu Nov 28, 2019 2:58 pm
manuel7 wrote:
Thu Nov 28, 2019 12:39 pm
I NEED YOUR HELP

I'm getting this message when LMDE 3 is booting.

Thanks!
what is the message?

[ 0.844915] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.844956] [Firmware Bug]: cpu 0, IBS interrupt offser 0 not availabke (MSR 001103A=0x0000000000000100)
[ 11.231897] ata5: SRST failed (errno =-16)
[ 21.235719] ata5: SRST failed (errno =-16)
[ 57.527075] ata5: SRST failed (errno =-16)
[ 93.622435] ata5: SRST failed (errno =-16)
modprobe: module dm-raid45 not found in modules.dep

manuel7
Level 1
Level 1
Posts: 12
Joined: Fri Jul 12, 2019 1:19 pm

Re: BOOTING PROBLEMS

Post by manuel7 » Sun Dec 01, 2019 11:29 pm

deepakdeshp wrote:
Thu Nov 28, 2019 12:41 pm
Incomplete help request. Please read how to ask for help in the forum.


[ 0.844915] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.844956] [Firmware Bug]: cpu 0, IBS interrupt offser 0 not availabke (MSR 001103A=0x0000000000000100)
[ 11.231897] ata5: SRST failed (errno =-16)
[ 21.235719] ata5: SRST failed (errno =-16)
[ 57.527075] ata5: SRST failed (errno =-16)
[ 93.622435] ata5: SRST failed (errno =-16)
modprobe: module dm-raid45 not found in modules.dep

User avatar
lsemmens
Level 9
Level 9
Posts: 2693
Joined: Wed Sep 10, 2014 9:07 pm
Location: Rural South Australia

Re: BOOTING PROBLEMS

Post by lsemmens » Mon Dec 02, 2019 2:16 am

manuel7 wrote:
Sun Dec 01, 2019 11:29 pm
deepakdeshp wrote:
Thu Nov 28, 2019 12:41 pm
Incomplete help request. Please read how to ask for help in the forum.
[ 0.844915] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.844956] [Firmware Bug]: cpu 0, IBS interrupt offser 0 not availabke (MSR 001103A=0x0000000000000100)
Unfortunately, that is NOT the information required In the link at the top of every Reply is a suggestion on How to get Help The most useful section is Section 5 Details, Details, Details in which it describes how to get a snapshot of your system.
Kernel: 4.15.0-46-generic x86_64 bits
Desktop: Cinnamon 3.8.9
Distro: Linux Mint 19 Tara

Laptop HP-ProBook-470-G2 8Gb RAM SSD
Server AMD Phenom 9650 - GEForce 9400GT 6Gb RAM
+ three other Mint machines
Out of my mind - please leave a message

manuel7
Level 1
Level 1
Posts: 12
Joined: Fri Jul 12, 2019 1:19 pm

Re: BOOTING PROBLEMS

Post by manuel7 » Mon Dec 02, 2019 6:47 pm

lsemmens wrote:
Mon Dec 02, 2019 2:16 am
manuel7 wrote:
Sun Dec 01, 2019 11:29 pm
deepakdeshp wrote:
Thu Nov 28, 2019 12:41 pm
Incomplete help request. Please read how to ask for help in the forum.
[ 0.844915] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.844956] [Firmware Bug]: cpu 0, IBS interrupt offser 0 not availabke (MSR 001103A=0x0000000000000100)
Unfortunately, that is NOT the information required In the link at the top of every Reply is a suggestion on How to get Help The most useful section is Section 5 Details, Details, Details in which it describes how to get a snapshot of your system.
Ok, I updated the information.
Thank you and sorry, I'm new here :o :(

User avatar
lsemmens
Level 9
Level 9
Posts: 2693
Joined: Wed Sep 10, 2014 9:07 pm
Location: Rural South Australia

Re: Booting Problems: I'm getting this message (updated)

Post by lsemmens » Mon Dec 02, 2019 8:20 pm

No stress manuel, be aware that for EVERY help request, that information will be required. I, unfortunately for you, am not as familiar with Linux as some of our other members, so am unable to assist you further. I wish you well in finding a solution.
Kernel: 4.15.0-46-generic x86_64 bits
Desktop: Cinnamon 3.8.9
Distro: Linux Mint 19 Tara

Laptop HP-ProBook-470-G2 8Gb RAM SSD
Server AMD Phenom 9650 - GEForce 9400GT 6Gb RAM
+ three other Mint machines
Out of my mind - please leave a message

manuel7
Level 1
Level 1
Posts: 12
Joined: Fri Jul 12, 2019 1:19 pm

Re: Booting Problems: I'm getting this message (updated)

Post by manuel7 » Mon Dec 02, 2019 9:11 pm

lsemmens wrote:
Mon Dec 02, 2019 8:20 pm
No stress manuel, be aware that for EVERY help request, that information will be required. I, unfortunately for you, am not as familiar with Linux as some of our other members, so am unable to assist you further. I wish you well in finding a solution.
Thank you.

Post Reply

Return to “Installation & Boot”