this is a new install, Cinnamon, with Nvidia Proprietary installed from stretch-backports,
I have stretch-backports enbabled,
sudo apt-get -t stretch-backports upgrade
worked fine, after reboot it showed:
0 upgraded, 0 newly installed, 0 to remove and 73 not upgraded
the Kernel was not list in the 73 not upgraded, mainly just apps like libre office,
and the 4.19 kernel is installed.
Code: Select all
Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-4.9.0-9-amd64 Found initrd image: /boot/initrd.img-4.9.0-9-amd64 Found linux image: /boot/vmlinuz-4.9.0-8-amd64 Found initrd image: /boot/initrd.img-4.9.0-8-amd64 Found memtest86+ image: /boot/memtest86+.bin Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin Adding boot menu entry for EFI firmware configuration done
sudo apt-get install -t stretch-backports linux-headers-4.19.0-0.bpo.4-amd64 linux-headers-4.19.0-0.bpo.4-common
sudo apt-get install linux-headers-4.19.0-0.bpo.4-amd64 linux-headers-4.19.0-0.bpo.4-common
Code: Select all
linux-headers-4.19.0-0.bpo.4-amd64 is already the newest version (4.19.28-2~bpo9+1). linux-headers-4.19.0-0.bpo.4-amd64 set to manually installed. linux-headers-4.19.0-0.bpo.4-common is already the newest version (4.19.28-2~bpo9+1). linux-headers-4.19.0-0.bpo.4-common set to manually installed.
sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-4.9.0-9-amd64
Only shows 4.9.
As far as I can tell the other apps upgraded, dkms and other apps are now running from backports, Nvidia was installed from there.
I ran my normal fix all commands:
Code: Select all
sudo dpkg --configure -a sudo apt-get --fix-broken install sudo aptitude clean -y sudo apt-get update -y && sudo aptitude update -y sudo apt-get upgrade -y && sudo aptitude full-upgrade -y sudo apt-get dist-upgrade -y && sudo apt-get dist-upgrade -y
I was trying to get sensors to work:
Sensors: Message: No sensors data was found. Is sensors configured?
sudo sensors-detect --auto
I get Sorry, no sensors were detected.
I think it was the OS, and upgrading it fixed this issue, I have an AMD Threadripper 1950 Water cooled with 3 Fans, and the correct die for the CPU, some dies are made for other CPU's, this one is not, and I have two sensors for it, actually 3 if you count the Water Cooler itself, and it over heated and shut down, and why I want this feature to work, I was running at 100% for hours with 32 threads, but I thought lm-sensors was working fine, in the past it has altered me of over heating, otherwise this was a stress test that was not good for the computer, I checked the control and it seemed to worked, but it is clear it does not, I checked after trying to reboot it, the first time the BIOS crashed, I let it sit, the case did not seem all that hot, restarting it showed 190 to 200 on start up in the BIOS, after cooling down, I was running handbrake when this happened, working on cutting down a 5 GB file to 2 GB, while watching another video, as such, I have a reason for wanting to upgrade to a newer OS, but I also have another issue with my QNAP NAS, with LMDE 3 Stretch I can delete files, and they go to my Trash can, with testing they do not, this also effects other OS's like Ubuntu, and Arch Linux or Manjaro, even Suse and Fedora, on CentOS 6 works, 7 fails, and Debian Buster fails as well as testing and sid, aka buster.
Anyone else have this issue, or know how to fix this?
Thanks for any help.