[Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Questions about hardware and drivers
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

[Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

I had an old and good dell latitude e6420 laptop. I have recently installed lmd4. My old nvidia card has no support with nvidia 418 or 430 drivers provided on install OS options. I had to make normal install and then install nvidia 390 currently .132. If i disable optimus from bios setting nvidia card is used but if i enable cinnamon crash and run on fallback mode. Here is some info i think could be usefull.

Code: Select all

System:    Host: ebenezer Kernel: 4.19.0-9-amd64 x86_64 bits: 64 Desktop: Cinnamon 4.4.8 Distro: LMDE 4 Debbie
Machine:   Type: Laptop System: Dell product: Latitude E6420 v: 01 serial: <root required>
           Mobo: Dell model: 0JC37G v: A01 serial: <root required> BIOS: Dell v: A25 date: 03/06/2018
CPU:       Topology: Dual Core model: Intel Core i7-2620M bits: 64 type: MT MCP L2 cache: 4096 KiB
           Speed: 906 MHz min/max: 800/3400 MHz Core speeds (MHz): 1: 798 2: 807 3: 804 4: 818
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics driver: i915 v: kernel
           Device-2: NVIDIA GF119M [NVS 4200M] driver: nvidia v: 390.132
           Display: x11 server: X.Org 1.20.4 driver: modesetting FAILED: nvidia unloaded: fbdev,vesa resolution: 1366x768~60Hz
           OpenGL: renderer: N/A v: N/A
dpkg -l |grep -i nvidia
[code]ii  glx-alternative-nvidia                             1.0.0                               amd64        allows the selection of NVIDIA as GLX provider
ii  libegl-nvidia-legacy-390xx0:amd64                  390.132-3~deb10u1                   amd64        NVIDIA binary EGL library (390xx legacy version)
ii  libegl-nvidia-legacy-390xx0:i386                   390.132-3~deb10u1                   i386         NVIDIA binary EGL library (390xx legacy version)
ii  libegl1-nvidia-legacy-390xx:amd64                  390.132-3~deb10u1                   amd64        NVIDIA binary EGL library (non-GLVND variant) (390xx legacy version)
ii  libegl1-nvidia-legacy-390xx:i386                   390.132-3~deb10u1                   i386         NVIDIA binary EGL library (non-GLVND variant) (390xx legacy version)
ii  libgl1-nvidia-legacy-390xx-glx:amd64               390.132-3~deb10u1                   amd64        NVIDIA binary OpenGL/GLX library (non-GLVND variant) (390xx legacy version)
ii  libgl1-nvidia-legacy-390xx-glx:i386                390.132-3~deb10u1                   i386         NVIDIA binary OpenGL/GLX library (non-GLVND variant) (390xx legacy version)
ii  libgles-nvidia-legacy-390xx1:amd64                 390.132-3~deb10u1                   amd64        NVIDIA binary OpenGL|ES 1.x library (390xx legacy version)
ii  libgles-nvidia-legacy-390xx1:i386                  390.132-3~deb10u1                   i386         NVIDIA binary OpenGL|ES 1.x library (390xx legacy version)
ii  libgles-nvidia-legacy-390xx2:amd64                 390.132-3~deb10u1                   amd64        NVIDIA binary OpenGL|ES 2.x library (390xx legacy version)
ii  libgles-nvidia-legacy-390xx2:i386                  390.132-3~deb10u1                   i386         NVIDIA binary OpenGL|ES 2.x library (390xx legacy version)
ii  libglx-nvidia-legacy-390xx0:amd64                  390.132-3~deb10u1                   amd64        NVIDIA binary GLX library (390xx legacy version)
ii  libglx-nvidia-legacy-390xx0:i386                   390.132-3~deb10u1                   i386         NVIDIA binary GLX library (390xx legacy version)
ii  libnvidia-container-tools                          1.0.7-1                             amd64        NVIDIA container runtime library (command-line tools)
ii  libnvidia-container1:amd64                         1.0.7-1                             amd64        NVIDIA container runtime library
ii  libnvidia-legacy-390xx-cfg1:amd64                  390.132-3~deb10u1                   amd64        NVIDIA binary OpenGL/GLX configuration library (390xx legacy version)
ii  libnvidia-legacy-390xx-cfg1:i386                   390.132-3~deb10u1                   i386         NVIDIA binary OpenGL/GLX configuration library (390xx legacy version)
ii  libnvidia-legacy-390xx-cuda1:amd64                 390.132-3~deb10u1                   amd64        NVIDIA CUDA Driver Library (390xx legacy version)
ii  libnvidia-legacy-390xx-cuda1:i386                  390.132-3~deb10u1                   i386         NVIDIA CUDA Driver Library (390xx legacy version)
ii  libnvidia-legacy-390xx-cuda1-i386:i386             390.132-3~deb10u1                   i386         NVIDIA CUDA 32-bit runtime library (390xx legacy version)
ii  libnvidia-legacy-390xx-eglcore:amd64               390.132-3~deb10u1                   amd64        NVIDIA binary EGL core libraries (390xx legacy version)
ii  libnvidia-legacy-390xx-eglcore:i386                390.132-3~deb10u1                   i386         NVIDIA binary EGL core libraries (390xx legacy version)
ii  libnvidia-legacy-390xx-fatbinaryloader:amd64       390.132-3~deb10u1                   amd64        NVIDIA FAT binary loader (390xx legacy version)
ii  libnvidia-legacy-390xx-fatbinaryloader:i386        390.132-3~deb10u1                   i386         NVIDIA FAT binary loader (390xx legacy version)
ii  libnvidia-legacy-390xx-glcore:amd64                390.132-3~deb10u1                   amd64        NVIDIA binary OpenGL/GLX core libraries (390xx legacy version)
ii  libnvidia-legacy-390xx-glcore:i386                 390.132-3~deb10u1                   i386         NVIDIA binary OpenGL/GLX core libraries (390xx legacy version)
ii  libnvidia-legacy-390xx-ml1:amd64                   390.132-3~deb10u1                   amd64        NVIDIA Management Library (NVML) runtime library (390xx legacy version)
ii  libnvidia-legacy-390xx-ml1:i386                    390.132-3~deb10u1                   i386         NVIDIA Management Library (NVML) runtime library (390xx legacy version)
ii  libnvidia-legacy-390xx-ptxjitcompiler1:amd64       390.132-3~deb10u1                   amd64        NVIDIA PTX JIT Compiler (390xx legacy version)
ii  libnvidia-legacy-390xx-ptxjitcompiler1:i386        390.132-3~deb10u1                   i386         NVIDIA PTX JIT Compiler (390xx legacy version)
ii  nvidia-container-toolkit                           1.0.5-1                             amd64        NVIDIA container runtime hook
ii  nvidia-detect                                      418.113-1                           amd64        NVIDIA GPU detection utility
ii  nvidia-installer-cleanup                           20151021+9                          amd64        cleanup after driver installation with the nvidia-installer
ii  nvidia-kernel-common                               20151021+9                          amd64        NVIDIA binary kernel module support files
ii  nvidia-legacy-390xx-alternative                    390.132-3~deb10u1                   amd64        allows the selection of NVIDIA as GLX provider (390xx legacy version)
ii  nvidia-legacy-390xx-driver-libs-nonglvnd:amd64     390.132-3~deb10u1                   amd64        NVIDIA metapackage (non-GLVND OpenGL/GLX/EGL/GLES libraries) (390xx legacy)
ii  nvidia-legacy-390xx-driver-libs-nonglvnd:i386      390.132-3~deb10u1                   i386         NVIDIA metapackage (non-GLVND OpenGL/GLX/EGL/GLES libraries) (390xx legacy)
ii  nvidia-legacy-390xx-driver-libs-nonglvnd-i386:i386 390.132-3~deb10u1                   i386         NVIDIA metapackage (non-GLVND OpenGL/EGL etc. 32-bit libraries) (390xx legacy)
ii  nvidia-legacy-390xx-kernel-dkms                    390.132-3~deb10u1                   amd64        NVIDIA binary kernel module DKMS source (390xx legacy version)
ii  nvidia-legacy-390xx-kernel-support                 390.132-3~deb10u1                   amd64        NVIDIA binary kernel module support files (390xx legacy version)
ii  nvidia-legacy-390xx-nonglvnd-vulkan-icd:amd64      390.132-3~deb10u1                   amd64        NVIDIA Vulkan ICD (non-GLVND variant) (390xx legacy version)
ii  nvidia-legacy-390xx-nonglvnd-vulkan-icd:i386       390.132-3~deb10u1                   i386         NVIDIA Vulkan ICD (non-GLVND variant) (390xx legacy version)
ii  nvidia-legacy-390xx-smi:i386                       390.132-3~deb10u1                   i386         NVIDIA System Management Interface (390xx legacy version)
ii  nvidia-legacy-390xx-vdpau-driver:amd64             390.132-3~deb10u1                   amd64        Video Decode and Presentation API for Unix - NVIDIA driver (390xx legacy)
ii  nvidia-modprobe                                    418.56-1                            amd64        utility to load NVIDIA kernel modules and create device nodes
ii  nvidia-nonglvnd-vulkan-common                      418.113-1                           amd64        NVIDIA Vulkan driver - common files (non-GLVND variant)
ii  nvidia-persistenced                                418.56-1                            amd64        daemon to maintain persistent software state in the NVIDIA driver
ii  nvidia-settings-legacy-390xx                       390.116-1                           amd64        tool for configuring the NVIDIA graphics driver (390xx legacy version)
ii  nvidia-support                                     20151021+9                          amd64        NVIDIA binary graphics driver support files
ii  xserver-xorg-video-nvidia-legacy-390xx             390.132-3~deb10u1                   amd64        NVIDIA binary Xorg driver (390xx legacy version
ls /etc/modprobe.d

Code: Select all

dkms.conf  intel-microcode-blacklist.conf  nvidia-blacklists-nouveau.conf  nvidia.conf  nvidia-kernel-common.conf
lspci -nnk |egrep -A3 -i "3D|VGA"

Code: Select all

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
        Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:0493]
        Kernel driver in use: i915
        Kernel modules: i915
--
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04)
        Subsystem: Dell 6 Series/C200 Series Chipset Family KT Controller [1028:0493]
        Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119M [NVS 4200M] [10de:1056] (rev a1)
        Subsystem: Dell GF119M [NVS 4200M] [1028:1493]
        Kernel driver in use: nvidia
        Kernel modules: nvidia
cat /var/log/Xorg.0.log

Code: Select all

[    28.276] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    28.276] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    28.276] Current Operating System: Linux ebenezer 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2 (2020-04-29) x86_64
[    28.276] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=8fe356db-9822-4c88-acdf-6cc4b9656b43 ro resume=UUID=8c028a44-64fb-4412-b818-f9ef3eb7cf62 resume_offset=5935104 quiet splash
[    28.276] Build Date: 05 March 2019  08:11:12PM
[    28.276] xorg-server 2:1.20.4-1 (https://www.debian.org/support) 
[    28.276] Current version of pixman: 0.36.0
[    28.276] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    28.276] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.276] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 15 18:23:43 2020
[    28.313] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.344] (==) No Layout section.  Using the first Screen section.
[    28.344] (==) No screen section available. Using defaults.
[    28.344] (**) |-->Screen "Default Screen Section" (0)
[    28.344] (**) |   |-->Monitor "<default monitor>"
[    28.367] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    28.367] (==) Automatically adding devices
[    28.367] (==) Automatically enabling devices
[    28.367] (==) Automatically adding GPU devices
[    28.367] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    28.489] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.489] 	Entry deleted from font path.
[    28.566] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    28.566] (**) ModulePath set to "/usr/lib/xorg/modules/linux,/usr/lib/xorg/modules"
[    28.566] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.566] (II) Loader magic: 0x561f19421e20
[    28.566] (II) Module ABI versions:
[    28.566] 	X.Org ANSI C Emulation: 0.4
[    28.566] 	X.Org Video Driver: 24.0
[    28.566] 	X.Org XInput driver : 24.1
[    28.566] 	X.Org Server Extension : 10.0
[    28.568] (++) using VT number 7

[    28.568] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    28.571] (II) xfree86: Adding drm device (/dev/dri/card1)
[    28.589] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.596] (--) PCI:*(0@0:2:0) 8086:0126:1028:0493 rev 9, Mem @ 0xe5400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    28.596] (--) PCI: (1@0:0:0) 10de:1056:1028:1493 rev 161, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    28.596] (II) LoadModule: "glx"
[    28.744] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    30.677] (II) Module glx: vendor="NVIDIA Corporation"
[    30.677] 	compiled for 4.0.2, module version = 1.0.0
[    30.677] 	Module class: X.Org Server Extension
[    30.708] (II) NVIDIA GLX Module  390.132  Fri Nov  1 04:00:46 PDT 2019
[    30.752] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    30.752] 	loading driver: nvidia
[    30.902] (==) Matched nvidia as autoconfigured driver 0
[    30.902] (==) Matched nouveau as autoconfigured driver 1
[    30.902] (==) Matched nv as autoconfigured driver 2
[    30.902] (==) Matched modesetting as autoconfigured driver 3
[    30.902] (==) Matched fbdev as autoconfigured driver 4
[    30.902] (==) Matched vesa as autoconfigured driver 5
[    30.902] (==) Assigned the driver to the xf86ConfigLayout
[    30.902] (II) LoadModule: "nvidia"
[    30.944] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    31.223] (II) Module nvidia: vendor="NVIDIA Corporation"
[    31.223] 	compiled for 4.0.2, module version = 1.0.0
[    31.223] 	Module class: X.Org Video Driver
[    31.238] (II) LoadModule: "nouveau"
[    31.239] (WW) Warning, couldn't open module nouveau
[    31.239] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    31.239] (II) LoadModule: "nv"
[    31.240] (WW) Warning, couldn't open module nv
[    31.240] (EE) Failed to load module "nv" (module does not exist, 0)
[    31.240] (II) LoadModule: "modesetting"
[    31.240] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    31.253] (II) Module modesetting: vendor="X.Org Foundation"
[    31.253] 	compiled for 1.20.4, module version = 1.20.4
[    31.253] 	Module class: X.Org Video Driver
[    31.253] 	ABI class: X.Org Video Driver, version 24.0
[    31.253] (II) LoadModule: "fbdev"
[    31.254] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    31.280] (II) Module fbdev: vendor="X.Org Foundation"
[    31.280] 	compiled for 1.20.0, module version = 0.5.0
[    31.280] 	Module class: X.Org Video Driver
[    31.280] 	ABI class: X.Org Video Driver, version 24.0
[    31.280] (II) LoadModule: "vesa"
[    31.281] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    31.282] (II) Module vesa: vendor="X.Org Foundation"
[    31.282] 	compiled for 1.20.1, module version = 2.4.0
[    31.282] 	Module class: X.Org Video Driver
[    31.282] 	ABI class: X.Org Video Driver, version 24.0
[    31.283] (II) NVIDIA dlloader X Driver  390.132  Fri Nov  1 03:36:28 PDT 2019
[    31.283] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    31.304] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    31.305] (II) FBDEV: driver for framebuffer: fbdev
[    31.305] (II) VESA: driver for VESA chipsets: vesa
[    31.324] (II) modeset(0): using drv /dev/dri/card0
[    31.324] (WW) Falling back to old probe method for fbdev
[    31.324] (II) Loading sub module "fbdevhw"
[    31.324] (II) LoadModule: "fbdevhw"
[    31.324] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    31.334] (II) Module fbdevhw: vendor="X.Org Foundation"
[    31.334] 	compiled for 1.20.4, module version = 0.0.2
[    31.334] 	ABI class: X.Org Video Driver, version 24.0
[    31.353] (II) modeset(G0): using drv /dev/dri/card1
[    31.353] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    31.353] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    31.353] (==) modeset(0): RGB weight 888
[    31.353] (==) modeset(0): Default visual is TrueColor
[    31.353] (II) Loading sub module "glamoregl"
[    31.353] (II) LoadModule: "glamoregl"
[    31.353] (WW) Warning, couldn't open module glamoregl
[    31.353] (EE) modeset: Failed to load module "glamoregl" (module does not exist, 0)
[    31.353] (EE) modeset(0): Failed to load glamor module.
[    31.353] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[    31.353] (II) modeset(0): Double-buffered shadow updates: off
[    31.353] (II) modeset(0): Output LVDS-1 has no monitor section
[    31.354] (II) modeset(0): Output VGA-1 has no monitor section
[    31.355] (II) modeset(0): EDID for output LVDS-1
[    31.355] (II) modeset(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    31.355] (II) modeset(0): Year: 2010  Week: 0
[    31.355] (II) modeset(0): EDID Version: 1.4
[    31.355] (II) modeset(0): Digital Display Input
[    31.355] (II) modeset(0): 6 bits per channel
[    31.355] (II) modeset(0): Digital interface is undefined
[    31.355] (II) modeset(0): Max Image Size [cm]: horiz.: 30  vert.: 17
[    31.355] (II) modeset(0): Gamma: 2.20
[    31.355] (II) modeset(0): No DPMS capabilities specified
[    31.355] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    31.355] (II) modeset(0): First detailed timing is preferred mode
[    31.355] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    31.355] (II) modeset(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.550
[    31.355] (II) modeset(0): blueX: 0.155 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    31.355] (II) modeset(0): Manufacturer's mask: 0
[    31.355] (II) modeset(0): Supported detailed timing:
[    31.355] (II) modeset(0): clock: 78.3 MHz   Image Size:  309 x 174 mm
[    31.355] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1652 h_border: 0
[    31.355] (II) modeset(0): v_active: 768  v_sync: 773  v_sync_end 778 v_blanking: 790 v_border: 0
[    31.355] (II) modeset(0): Supported detailed timing:
[    31.355] (II) modeset(0): clock: 50.0 MHz   Image Size:  309 x 174 mm
[    31.355] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1582 h_border: 0
[    31.355] (II) modeset(0): v_active: 768  v_sync: 773  v_sync_end 778 v_blanking: 790 v_border: 0
[    31.355] (II) modeset(0):  X7JCD\81140AT
[    31.355] (II) modeset(0): Unknown vendor-specific block 0
[    31.355] (II) modeset(0): EDID (in hex):
[    31.355] (II) modeset(0): 	00ffffffffffff004ca3415400000000
[    31.355] (II) modeset(0): 	00140104901e11780a8bc59457548c27
[    31.355] (II) modeset(0): 	17505400000001010101010101010101
[    31.355] (II) modeset(0): 	010101010101961e561e510016303020
[    31.355] (II) modeset(0): 	550035ae1000001a871356d850001630
[    31.355] (II) modeset(0): 	3020550035ae1000001a000000fe0058
[    31.355] (II) modeset(0): 	374a43448131343041540a2000000000
[    31.355] (II) modeset(0): 	00004101bf0000000001010a2020001a
[    31.355] (II) modeset(0): Printing probed modes for output LVDS-1
[    31.355] (II) modeset(0): Modeline "1366x768"x60.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    31.355] (II) modeset(0): Modeline "1366x768"x40.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    31.355] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    31.355] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    31.355] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    31.355] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    31.355] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    31.355] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    31.355] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    31.355] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    31.355] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    31.355] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    31.355] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    31.355] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    31.355] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    31.355] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    31.355] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    31.355] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    31.355] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    31.355] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    31.355] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    31.355] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    31.355] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    31.355] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    31.355] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    31.355] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    31.355] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    31.355] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    31.355] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    31.355] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    31.355] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    31.355] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    31.355] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    31.355] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    31.355] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    31.355] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    31.355] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    31.355] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    31.355] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    31.355] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    31.355] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    31.355] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    31.355] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    31.355] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    31.355] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    31.355] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    31.355] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    31.355] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    31.355] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    31.355] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    31.355] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    31.355] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    31.355] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    31.355] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    31.355] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    31.355] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    31.355] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    31.355] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    31.355] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    31.355] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    31.355] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    31.355] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    31.357] (II) modeset(0): EDID for output VGA-1
[    31.357] (II) modeset(0): Output LVDS-1 connected
[    31.357] (II) modeset(0): Output VGA-1 disconnected
[    31.357] (II) modeset(0): Using exact sizes for initial modes
[    31.357] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    31.357] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    31.357] (==) modeset(0): DPI set to (96, 96)
[    31.357] (II) Loading sub module "fb"
[    31.357] (II) LoadModule: "fb"
[    31.357] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.395] (II) Module fb: vendor="X.Org Foundation"
[    31.396] 	compiled for 1.20.4, module version = 1.0.0
[    31.396] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.396] (II) Loading sub module "shadow"
[    31.396] (II) LoadModule: "shadow"
[    31.396] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    31.397] (II) Module shadow: vendor="X.Org Foundation"
[    31.397] 	compiled for 1.20.4, module version = 1.1.0
[    31.397] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.400] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    31.400] (==) modeset(G0): RGB weight 888
[    31.400] (==) modeset(G0): Default visual is TrueColor
[    31.400] (II) Loading sub module "glamoregl"
[    31.400] (II) LoadModule: "glamoregl"
[    31.400] (WW) Warning, couldn't open module glamoregl
[    31.400] (EE) modeset: Failed to load module "glamoregl" (module does not exist, 0)
[    31.400] (EE) modeset(G0): Failed to load glamor module.
[    31.400] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[    31.400] (II) modeset(G0): Double-buffered shadow updates: off
[    31.401] (II) modeset(G0): Output VGA-1-2 has no monitor section
[    31.405] (II) modeset(G0): Output LVDS-1-2 has no monitor section
[    31.405] (II) modeset(G0): Output DP-1-1 has no monitor section
[    31.406] (II) modeset(G0): Output DP-1-2 has no monitor section
[    31.406] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    31.408] (II) modeset(G0): EDID for output VGA-1-2
[    31.411] (II) modeset(G0): EDID for output LVDS-1-2
[    31.411] (II) modeset(G0): EDID for output DP-1-1
[    31.412] (II) modeset(G0): EDID for output DP-1-2
[    31.412] (II) modeset(G0): EDID for output HDMI-1-1
[    31.412] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    31.412] (==) modeset(G0): DPI set to (96, 96)
[    31.412] (II) Loading sub module "fb"
[    31.412] (II) LoadModule: "fb"
[    31.412] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.412] (II) Module fb: vendor="X.Org Foundation"
[    31.412] 	compiled for 1.20.4, module version = 1.0.0
[    31.412] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.412] (II) Loading sub module "shadow"
[    31.412] (II) LoadModule: "shadow"
[    31.412] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    31.412] (II) Module shadow: vendor="X.Org Foundation"
[    31.412] 	compiled for 1.20.4, module version = 1.1.0
[    31.412] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.412] (II) UnloadModule: "fbdev"
[    31.412] (II) Unloading fbdev
[    31.412] (II) UnloadSubModule: "fbdevhw"
[    31.412] (II) Unloading fbdevhw
[    31.412] (II) UnloadModule: "vesa"
[    31.412] (II) Unloading vesa
[    31.446] (==) modeset(G0): Backing store enabled
[    31.446] (==) modeset(G0): Silken mouse enabled
[    31.466] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    31.466] (==) modeset(G0): DPMS enabled
[    31.466] (==) modeset(0): Backing store enabled
[    31.467] (==) modeset(0): Silken mouse enabled
[    31.491] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    31.491] (==) modeset(0): DPMS enabled
[    31.491] (II) Initializing extension Generic Event Extension
[    31.491] (II) Initializing extension SHAPE
[    31.492] (II) Initializing extension MIT-SHM
[    31.492] (II) Initializing extension XInputExtension
[    31.536] (II) Initializing extension XTEST
[    31.537] (II) Initializing extension BIG-REQUESTS
[    31.537] (II) Initializing extension SYNC
[    31.537] (II) Initializing extension XKEYBOARD
[    31.537] (II) Initializing extension XC-MISC
[    31.538] (II) Initializing extension SECURITY
[    31.538] (II) Initializing extension XFIXES
[    31.538] (II) Initializing extension RENDER
[    31.538] (II) Initializing extension RANDR
[    31.539] (II) Initializing extension COMPOSITE
[    31.539] (II) Initializing extension DAMAGE
[    31.539] (II) Initializing extension MIT-SCREEN-SAVER
[    31.540] (II) Initializing extension DOUBLE-BUFFER
[    31.540] (II) Initializing extension RECORD
[    31.540] (II) Initializing extension DPMS
[    31.541] (II) Initializing extension Present
[    31.541] (II) Initializing extension DRI3
[    31.541] (II) Initializing extension X-Resource
[    31.541] (II) Initializing extension XVideo
[    31.541] (II) Initializing extension XVideo-MotionCompensation
[    31.541] (II) Initializing extension SELinux
[    31.541] (II) SELinux: Disabled on system
[    31.541] (II) Initializing extension XFree86-VidModeExtension
[    31.542] (II) Initializing extension XFree86-DGA
[    31.542] (II) Initializing extension XFree86-DRI
[    31.543] (II) Initializing extension DRI2
[    31.543] (II) Initializing extension GLX
[    31.563] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    31.563] (II) modeset(G0): Damage tracking initialized
[    31.563] (II) modeset(0): Damage tracking initialized
[    31.563] (II) modeset(0): Setting screen physical size to 361 x 203
[    33.023] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    33.023] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    33.023] (II) LoadModule: "libinput"
[    33.024] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    33.257] (II) Module libinput: vendor="X.Org Foundation"
[    33.257] 	compiled for 1.20.4, module version = 0.28.2
[    33.257] 	Module class: X.Org XInput Driver
[    33.257] 	ABI class: X.Org XInput driver, version 24.1
[    33.257] (II) Using input driver 'libinput' for 'Power Button'
[    33.257] (**) Power Button: always reports core events
[    33.257] (**) Option "Device" "/dev/input/event4"
[    33.258] (**) Option "_source" "server/udev"
[    33.512] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    33.512] (II) event4  - Power Button: device is a keyboard
[    33.512] (II) event4  - Power Button: device removed
[    33.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    33.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.536] (**) Option "xkb_model" "pc105"
[    33.536] (**) Option "xkb_layout" "us"
[    33.536] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.578] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    33.578] (II) event4  - Power Button: device is a keyboard
[    33.580] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    33.580] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    33.580] (II) Using input driver 'libinput' for 'Video Bus'
[    33.580] (**) Video Bus: always reports core events
[    33.580] (**) Option "Device" "/dev/input/event6"
[    33.580] (**) Option "_source" "server/udev"
[    33.582] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    33.582] (II) event6  - Video Bus: device is a keyboard
[    33.582] (II) event6  - Video Bus: device removed
[    33.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[    33.620] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    33.620] (**) Option "xkb_model" "pc105"
[    33.620] (**) Option "xkb_layout" "us"
[    33.620] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.622] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    33.622] (II) event6  - Video Bus: device is a keyboard
[    33.623] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    33.623] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    33.623] (II) Using input driver 'libinput' for 'Video Bus'
[    33.623] (**) Video Bus: always reports core events
[    33.623] (**) Option "Device" "/dev/input/event5"
[    33.623] (**) Option "_source" "server/udev"
[    33.625] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    33.625] (II) event5  - Video Bus: device is a keyboard
[    33.625] (II) event5  - Video Bus: device removed
[    33.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:00/input/input7/event5"
[    33.660] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    33.660] (**) Option "xkb_model" "pc105"
[    33.660] (**) Option "xkb_layout" "us"
[    33.660] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.664] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    33.664] (II) event5  - Video Bus: device is a keyboard
[    33.666] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    33.666] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    33.666] (II) Using input driver 'libinput' for 'Power Button'
[    33.666] (**) Power Button: always reports core events
[    33.666] (**) Option "Device" "/dev/input/event2"
[    33.666] (**) Option "_source" "server/udev"
[    33.668] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    33.668] (II) event2  - Power Button: device is a keyboard
[    33.668] (II) event2  - Power Button: device removed
[    33.692] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    33.692] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    33.692] (**) Option "xkb_model" "pc105"
[    33.692] (**) Option "xkb_layout" "us"
[    33.692] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.695] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    33.695] (II) event2  - Power Button: device is a keyboard
[    33.697] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    33.697] (II) No input driver specified, ignoring this device.
[    33.697] (II) This device may have been added with another device file.
[    33.698] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    33.698] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    33.698] (II) Using input driver 'libinput' for 'Sleep Button'
[    33.698] (**) Sleep Button: always reports core events
[    33.698] (**) Option "Device" "/dev/input/event3"
[    33.698] (**) Option "_source" "server/udev"
[    33.700] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[    33.700] (II) event3  - Sleep Button: device is a keyboard
[    33.701] (II) event3  - Sleep Button: device removed
[    33.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    33.716] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    33.716] (**) Option "xkb_model" "pc105"
[    33.716] (**) Option "xkb_layout" "us"
[    33.716] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.719] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[    33.719] (II) event3  - Sleep Button: device is a keyboard
[    33.723] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[    33.723] (II) No input driver specified, ignoring this device.
[    33.723] (II) This device may have been added with another device file.
[    33.725] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[    33.725] (II) No input driver specified, ignoring this device.
[    33.725] (II) This device may have been added with another device file.
[    33.726] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[    33.726] (II) No input driver specified, ignoring this device.
[    33.726] (II) This device may have been added with another device file.
[    33.728] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[    33.728] (II) No input driver specified, ignoring this device.
[    33.728] (II) This device may have been added with another device file.
[    33.728] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event13)
[    33.728] (II) No input driver specified, ignoring this device.
[    33.728] (II) This device may have been added with another device file.
[    33.729] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[    33.729] (II) No input driver specified, ignoring this device.
[    33.729] (II) This device may have been added with another device file.
[    33.729] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event15)
[    33.729] (II) No input driver specified, ignoring this device.
[    33.729] (II) This device may have been added with another device file.
[    33.729] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[    33.729] (II) No input driver specified, ignoring this device.
[    33.729] (II) This device may have been added with another device file.
[    33.730] (II) config/udev: Adding input device SEMICCHIP Usb Mouse (/dev/input/event7)
[    33.730] (**) SEMICCHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[    33.730] (II) Using input driver 'libinput' for 'SEMICCHIP Usb Mouse'
[    33.730] (**) SEMICCHIP Usb Mouse: always reports core events
[    33.730] (**) Option "Device" "/dev/input/event7"
[    33.730] (**) Option "_source" "server/udev"
[    33.791] (II) event7  - SEMICCHIP Usb Mouse: is tagged by udev as: Mouse
[    33.791] (II) event7  - SEMICCHIP Usb Mouse: device is a pointer
[    33.791] (II) event7  - SEMICCHIP Usb Mouse: device removed
[    33.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:1A2C:0042.0001/input/input9/event7"
[    33.836] (II) XINPUT: Adding extended input device "SEMICCHIP Usb Mouse" (type: MOUSE, id 11)
[    33.837] (**) Option "AccelerationScheme" "none"
[    33.837] (**) SEMICCHIP Usb Mouse: (accel) selected scheme none/0
[    33.837] (**) SEMICCHIP Usb Mouse: (accel) acceleration factor: 2.000
[    33.837] (**) SEMICCHIP Usb Mouse: (accel) acceleration threshold: 4
[    33.900] (II) event7  - SEMICCHIP Usb Mouse: is tagged by udev as: Mouse
[    33.900] (II) event7  - SEMICCHIP Usb Mouse: device is a pointer
[    33.902] (II) config/udev: Adding input device SEMICCHIP Usb Mouse (/dev/input/mouse0)
[    33.902] (II) No input driver specified, ignoring this device.
[    33.902] (II) This device may have been added with another device file.
[    33.904] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[    33.904] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    33.904] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    33.904] (**) Dell WMI hotkeys: always reports core events
[    33.904] (**) Option "Device" "/dev/input/event10"
[    33.904] (**) Option "_source" "server/udev"
[    33.905] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    33.905] (II) event10 - Dell WMI hotkeys: device is a keyboard
[    33.905] (II) event10 - Dell WMI hotkeys: device removed
[    33.944] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11/event10"
[    33.944] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[    33.944] (**) Option "xkb_model" "pc105"
[    33.944] (**) Option "xkb_layout" "us"
[    33.944] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.948] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    33.948] (II) event10 - Dell WMI hotkeys: device is a keyboard
[    33.950] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.951] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    33.951] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    33.951] (**) AT Translated Set 2 keyboard: always reports core events
[    33.951] (**) Option "Device" "/dev/input/event0"
[    33.951] (**) Option "_source" "server/udev"
[    33.952] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    33.952] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    33.953] (II) event0  - AT Translated Set 2 keyboard: device removed
[    33.976] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    33.976] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    33.976] (**) Option "xkb_model" "pc105"
[    33.976] (**) Option "xkb_layout" "us"
[    33.976] (**) Option "xkb_options" "grp:ctrls_toggle"
[    33.980] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    33.980] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    33.983] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event8)
[    33.983] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[    33.984] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[    33.984] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[    33.984] (**) Option "Device" "/dev/input/event8"
[    33.984] (**) Option "_source" "server/udev"
[    33.986] (II) event8  - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[    33.987] (II) event8  - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[    33.988] (II) event8  - AlpsPS/2 ALPS DualPoint Stick: device removed
[    34.020] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event8"
[    34.020] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 14)
[    34.020] (**) Option "AccelerationScheme" "none"
[    34.020] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[    34.020] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[    34.020] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[    34.022] (II) event8  - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[    34.023] (II) event8  - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[    34.024] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[    34.024] (II) No input driver specified, ignoring this device.
[    34.024] (II) This device may have been added with another device file.
[    34.025] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event9)
[    34.025] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[    34.025] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[    34.025] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    34.025] (**) Option "Device" "/dev/input/event9"
[    34.025] (**) Option "_source" "server/udev"
[    34.026] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[    34.027] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    34.028] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[    34.028] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[    34.076] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event9"
[    34.076] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[    34.078] (**) Option "AccelerationScheme" "none"
[    34.078] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[    34.078] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[    34.078] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[    34.081] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[    34.082] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    34.084] (II) event9  - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[    34.085] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[    34.085] (II) No input driver specified, ignoring this device.
[    34.085] (II) This device may have been added with another device file.
[    34.085] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    34.085] (II) No input driver specified, ignoring this device.
[    34.085] (II) This device may have been added with another device file.
[    47.945] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    47.945] (II) modeset(0): Printing DDC gathered Modelines:
[    47.945] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    47.945] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    48.308] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    48.308] (II) modeset(0): Printing DDC gathered Modelines:
[    48.308] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    48.308] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    48.477] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    48.477] (II) modeset(0): Printing DDC gathered Modelines:
[    48.477] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    48.477] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    48.708] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    48.708] (II) modeset(0): Printing DDC gathered Modelines:
[    48.708] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    48.708] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    51.229] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    51.229] (II) modeset(0): Printing DDC gathered Modelines:
[    51.229] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    51.229] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.293] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.293] (II) modeset(0): Printing DDC gathered Modelines:
[    60.293] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.293] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.295] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.295] (II) modeset(0): Printing DDC gathered Modelines:
[    60.295] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.295] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.297] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.297] (II) modeset(0): Printing DDC gathered Modelines:
[    60.297] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.297] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.299] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.299] (II) modeset(0): Printing DDC gathered Modelines:
[    60.299] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.299] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.301] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.301] (II) modeset(0): Printing DDC gathered Modelines:
[    60.301] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.301] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    60.302] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    60.302] (II) modeset(0): Printing DDC gathered Modelines:
[    60.302] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    60.302] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[    81.474] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    81.474] (II) modeset(0): Printing DDC gathered Modelines:
[    81.474] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[    81.474] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[   148.971] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   148.971] (II) modeset(0): Printing DDC gathered Modelines:
[   148.971] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[   148.971] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[   155.972] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   155.972] (II) modeset(0): Printing DDC gathered Modelines:
[   155.972] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[   155.972] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
[   654.669] (II) event7  - SEMICCHIP Usb Mouse: Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.12.6/button-debouncing.html for details
[  1793.967] (II) modeset(0): EDID vendor "SEC", prod id 21569
[  1793.967] (II) modeset(0): Printing DDC gathered Modelines:
[  1793.967] (II) modeset(0): Modeline "1366x768"x0.0   78.30  1366 1414 1446 1652  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[  1793.967] (II) modeset(0): Modeline "1366x768"x0.0   49.99  1366 1414 1446 1582  768 773 778 790 +hsync -vsync (31.6 kHz e)
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Top
User avatar
roblm
Level 15
Level 15
Posts: 5939
Joined: Sun Feb 24, 2013 2:41 pm

Re: LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by roblm »

I have been working with the OP through Private Messages but there appears to be a limit to the total message size, so I have added the info here.

After doing some testing on my Optimus laptop with LMDE 4, I found out that the Nvidia-390 driver is not configured exactly the same as the 418 and 440 drivers. The 418 driver is the default driver installed when you use the command apt install nvidia-driver and the newest 440 driver is from the Buster backports. With the 418 and 440 drivers, there is no fallback mode after the driver is installed, but there is fallback mode after the 390 driver is installed. This is bad if you want to switch back to using the Intel GPU. These steps were used to solve all the problems.

Use this command to create an xorg.conf file: sudo touch /etc/X11/xorg.conf

Open the file for editing: xed admin:///etc/X11/xorg.conf

Add these lines:

Code: Select all

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1:0:0" 
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:0:2:0" 
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection
Open the File Manager. Right click in the empty space and select Create New Document > Empty Document. Name it .nvidia (The dot makes it a hidden file). Open the file and add these lines:

Code: Select all

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Close the file. Right click on it and select Properties > Permissions. Mark the checkbox next to Allow executing file as program.

Use this command to open the 70-linuxmint.conf file:
xed admin:///etc/lightdm/lightdm.conf.d/70-linuxmint.conf

Add this line: display-setup-script=/home/your-user-name/.nvidia, changing your-user-name to your actual user name.

Reboot and the Nvidia GPU should be doing the graphics rendering.

The main Mint editions are based on Ubuntu and use the nvidia-prime program to switch GPUs but LMDE 4, which is based on Debian, can’t use that program. The switching must be done manually. To switch back to the Intel GPU for graphics rendering, you must use one or two commands to prevent the Nvidia driver from loading, depending on what driver version is installed. This disables the xorg.conf and nvidia-drm-outputclass.conf files by renaming them. This is followed by logging out and back in or rebooting. Both of these commands are needed for the Nvidia-390 driver. Only the first one is needed for the 418 and 440 drivers.

Code: Select all

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
sudo mv /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf.old
To switch back to the Nvidia GPU for graphics rendering, those two file changes are reversed:

Code: Select all

sudo mv /etc/X11/xorg.conf.old /etc/X11/xorg.conf
sudo mv /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf.old /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf

************************************

rprebollo,
This is the remaining info that I was unable to send as a Private Message. Would you test the script below and report if it works correctly. Use the command inxi -G to check if the GPU has changed.

To make the GPU switching easier, a desktop script can be used. Right click on the desktop and select Create New Document > Empty Document. Name it Switch GPU. Open the file and add these lines:

Code: Select all

#!/bin/sh

if [ $(ls /etc/X11/ | grep xorg.conf) = "xorg.conf" ]; then
   gvfs-set-attribute $HOME/Desktop/Switch\ GPU -t string metadata::custom-icon file://$HOME/Pictures/Intel-logo.svg   
   sudo mv /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf.old 
   sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old; reboot

elif [ $(ls /etc/X11/ | grep xorg.conf) = "xorg.conf.old" ]; then
   gvfs-set-attribute $HOME/Desktop/Switch\ GPU -t string metadata::custom-icon file://$HOME/Pictures/Nvidia-logo.svg  
   sudo mv /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf.old /etc/nvidia/legacy-390xx/nvidia-drm-outputclass.conf
   sudo mv /etc/X11/xorg.conf.old /etc/X11/xorg.conf; reboot
fi
Save the file and close it. Right click on it and select Properties > Permissions. Mark the checkbox next to Allow executing file as program. When you click on the desktop script, choose the option Run in Terminal.
After typing your password, the GPU that is currently selected will be switched, followed by a reboot.

Also, the main Mint editions use the nvidia-prime applet that is added to the system tray and it’s icon will show what GPU is selected. For LMDE 4, a similar function is added to the script. It’s icon will be changed to show what GPU is selected. It will look like one of the two icons below:

Switch GPU Intel+Nvidia.png
Switch GPU Intel+Nvidia.png (10.93 KiB) Viewed 1556 times

For this feature to work, download the switch-gpu.zip file below, which contains the Nvidia-logo.svg and Intel-logo.svg icons. Right click on it and select Extract Here. Move the icons to the Pictures folder.

switch-gpu.zip
(13.42 KiB) Downloaded 43 times

If the icon is not changed, then check in /etc/X11/. Only xorg.conf or xorg.conf.old should be listed.
There should not be any other file with xorg.conf in it, such as xorg.conf.backup.


Use this simpler desktop script if the Nvdiia-418 and 440 drivers are installed:

Code: Select all

#!/bin/sh

if [ $(ls /etc/X11/ | grep xorg.conf) = "xorg.conf" ]; then
   gvfs-set-attribute $HOME/Desktop/Switch\ GPU -t string metadata::custom-icon file://$HOME/Pictures/Intel-logo.svg   
   sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old; reboot

elif [ $(ls /etc/X11/ | grep xorg.conf) = "xorg.conf.old" ]; then
   gvfs-set-attribute $HOME/Desktop/Switch\ GPU -t string metadata::custom-icon file://$HOME/Pictures/Nvidia-logo.svg  
   sudo mv /etc/X11/xorg.conf.old /etc/X11/xorg.conf; reboot
fi
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

Thanks man, everything was just right as you instruct me. Thank you, thank you. Thanks to you i can now use the full power of my laptop. By the way i was having troubles resuming from hibernation (use swapfile) and as soon the nvidia problem was solved that its working 100% too. I think must change subject to "[SOLVED]" no??? By the way, and that is topic for another post, i know, why is boot time so slow once nvidia drivers installed. Nvidia support just sucks???
Top
User avatar
roblm
Level 15
Level 15
Posts: 5939
Joined: Sun Feb 24, 2013 2:41 pm

Re: LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by roblm »

rprebollo wrote: I think must change subject to "[SOLVED]" no??? By the way, and that is topic for another post, i know, why is boot time so slow once nvidia drivers installed.
Open your first post and click the Edit post icon. In the Subject window add [Solved] in front of the topic name.

How much slower is the boot time with the Nvidia GPU enabled?

Try this easy method first. Open the xorg.conf file: xed admin:///etc/X11/xorg.conf

Add this X Config line to the first Device section: Option "ConnectedMonitor" "DFP-0"

So the section will now look like this:

Code: Select all

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1:0:0" 
    Option "ConnectedMonitor" "DFP-0"
EndSection
Reboot and check the boot time.
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

Open your first post and click the Edit post icon. In the Subject window add [Solved] in front of the topic name.
Done!!!
How much slower is the boot time with the Nvidia GPU enabled?
I know this is an old laptop but before the nvidia drivers installation booted in 40 secs or so (autologin on) now this is my situation (by the way even if i switch to intel gpu boot time just sucks).

this is before xorg changes you sugested in latest post:

Code: Select all

 systemd-analyze
Startup finished in 11.323s (kernel) + 1min 51.486s (userspace) = 2min 2.810s
graphical.target reached after 1min 51.474s in userspace
Now am gonna make the changes you suggested.
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

Now with xorg changes:

Code: Select all

systemd-analyze
Startup finished in 7.847s (kernel) + 1min 38.225s (userspace) = 1min 46.073s
graphical.target reached after 1min 38.206s in userspace
Still sucks but is a progress.
Mint logo is there about 30 secs but when get to the autologin part i got a blank screen for one minute or more, then the cursor and finally cinnamon desktop.

Seems to be docker but i have been there before, disable docker and the it will be another, i think the root cause is nvidia related because before drivers installation everything was in normal range.

Code: Select all

systemd-analyze blame
     1min 5.277s docker.service
         16.456s media-datos.mount
         13.116s NetworkManager-wait-online.service
          9.385s systemd-journal-flush.service
          8.207s dev-sda5.device
          7.982s udisks2.service
          6.557s accounts-daemon.service
          5.813s debian-system-adjustments.service
          4.195s NetworkManager.service
          3.157s user@1000.service
          3.041s thermald.service
          3.001s lightdm.service
          2.992s plymouth-quit-wait.service
          2.914s systemd-logind.service
          2.749s wpa_supplicant.service
          2.315s avahi-daemon.service
          1.801s acpi-support.service
          1.788s apparmor.service
          1.753s nvidia-persistenced.service
          1.748s systemd-modules-load.service
          1.598s networking.service
          1.359s rsyslog.service
          1.202s pppd-dns.service
          1.172s ssh.service
          1.060s systemd-rfkill.service
          1.050s polkit.serviceboot really fast
          1.032s dns-clean.service
           949ms systemd-udevd.service
           801ms upower.service
           738ms systemd-tmpfiles-setup-dev.service
           722ms systemd-tmpfiles-setup.service
           698ms colord.service
           653ms sysfsutils.service
           652ms lm-sensors.service
           647ms home-swapfile.swap
           503ms cntlm.service

Code: Select all

systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @1min 38.206s
└─multi-user.target @1min 38.206s
  └─docker.service @32.928s +1min 5.277s
    └─network-online.target @32.927s
      └─NetworkManager-wait-online.service @19.810s +13.116s
        └─NetworkManager.service @15.611s +4.195s
          └─dbus.service @14.416s
            └─basic.target @14.250s
              └─sockets.target @14.250s
                └─docker.socket @14.188s +1ms
                  └─sysinit.target @14.019s
                    └─sys-fs-fuse-connections.mount @21.981s +5ms
                      └─systemd-modules-load.service @3.038s +1.748s
                        └─systemd-journald.socket @2.954s
                          └─-.mount @2.866s
                            └─systemd-journald.socket @2.954s
                              └─...
Top
User avatar
roblm
Level 15
Level 15
Posts: 5939
Joined: Sun Feb 24, 2013 2:41 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by roblm »

rprebollo wrote: ...i think the root cause is nvidia related because before drivers installation everything was in normal range.
You can test that by not removing the Nvidia driver. First switch to the Intel GPU.

Open the 70-linuxmint.conf file: xed admin:///etc/lightdm/lightdm.conf.d/70-linuxmint.conf

Add a pound sign (#) in front of the line you previously added, to disable it, so it will now look like this:
# display-setup-script=/home/your-user-name/.nvidia

Use this command to create a blacklist-nvidia.conf file:
sudo touch /lib/modprobe.d/blacklist-nvidia.conf

Open the file for editing: xed admin:///lib/modprobe.d/blacklist-nvidia.conf

Add these lines:

Code: Select all

blacklist nvidia
blacklist nvidia-drm
blacklist nvidia-modeset
alias nvidia off
alias nvidia-drm off
alias nvidia-modeset off
Now the Nvidia driver module and in addition, the 3 Nvidia kernel modules won’t load.

Reboot and check the boot time.
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

Wow, this is gonna sound very rare indeed: I can't switch to intel GPU now. I double and triple checked.
First let me explain what i mean by "can't switch to intel gpu". System starts normal boot process after execute your script, then appears never reach graphical.target. I remove splash on boot to see what is happening. It ends normal boot, blinking cursor (underscore) is there. There is some disk activity according to laptop led and in some point no more disk activity blinking cursor and nothing happens. Using nvidia when system arrive to blinking cursor then make a switch, i think to graphical.target and continues to auto login ...

What i have tried:
Undo last change about
Option "ConnectedMonitor" "DFP-0"
.
Execute switch script instructions directly on terminal to see if something came out.
Double and triple check proper move of xorg.conf .outputclass.
Reboot and reboot and reboot.
Undo call to .nvidia script from lightdm settings.

So far nothing bring me to Intel GPU.

Waiting your reply.
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

Calm down. False alarm. Optimus was disabled on my bios setting. I have no idea how that happened. I got the clue from an inxi report show me only nvidia GPU. But make some discovering in the process.

I have wrongly placed
Option "ConnectedMonitor" "DFP-0"
in xorg.conf. I put it inside "Server Layout session". But when i put it where you instruct me i get my desktop background after autologin but not desktop. There is no panels, no icons, windows key doesn't bring menu ... I manage to call a terminal with alt+f2 and remove troubling setting from xorg.conf and reboot. Another thing: in your script for gpu switching this command

Code: Select all

gvfs-set-attribute
through this warnig:

Code: Select all

This tool has been deprecated, use 'gio set' instead.
See 'gio help set' for more info.
Although it does the job.

And finally, i have changed

Code: Select all

reboot
by

Code: Select all

systemctl reboot -i
also in the switching GPU script. Something about not capable or make reboot for sshd logged that i could only see when execute code on terminal because nothing was happening clicking on the script on my desktop.

Now am gone try modprobing nvidia drivers for the slow boot problem.
Last edited by rprebollo on Mon Jul 13, 2020 11:26 am, edited 1 time in total.
Top
rprebollo
Level 1
Level 1
Posts: 7
Joined: Fri May 15, 2020 6:29 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by rprebollo »

You shout my mouth. After blacklist nvidia drivers boot time still sucks. Then proceeded to mask systemd services: docker, nm-wait-online, disable persistent logs lvm2-monitor.service. After that boot time experiments no significant improve. Then disable auto mounting of ntfs partition. This is an hdd. Now my boot time is:

Code: Select all

Startup finished in 7.620s (kernel) + 21.586s (userspace) = 29.206s
graphical.target reached after 21.574s in userspace
It is not a solution but at least i know the root of my problem, i need one sdd, dont you think??
Top
User avatar
roblm
Level 15
Level 15
Posts: 5939
Joined: Sun Feb 24, 2013 2:41 pm

Re: [Solved] LMDE 4 Dell Optimus Graphic Card Cinnamon Fallback Mode

Post by roblm »

That’s very strange how the Optimus setting got changed in the BIOS.
rprebollo wrote: Another thing: in your script for gpu switching this command

Code: Select all

gvfs-set-attribute
through this warnig:

Code: Select all

This tool has been deprecated, use 'gio set' instead.
See 'gio help set' for more info.
That command only switches the script’s icon. You can ignore that message and continue to use it without any adverse effect. At the worst, it won’t work. I’ve used other deprecated (made obsolete) commands before and continue to use some now. Also, there is no gio command that Mint uses or any gio package from the repositories, except for a gio-sharp, and when you try to install it, the message says Unable to locate package gio-sharp

Also, the reboot command is not deprecated.
rprebollo wrote: It is not a solution but at least i know the root of my problem, i need one sdd, dont you think??
I have an SSD in my laptop and all 3 of my newer main PCs.

You previously said the boot time was only slow after installing the Nvidia driver. Do you have a Timeshift restore point to use before the Nvidia driver was installed? Or you could remove the Nvidia driver to retest the boot time. It’s not that time consuming to redo everything.

Here is my output for comparison:

Code: Select all

systemd-analyze	(Nvidia driver installed)
Startup finished in 4.232s (firmware) + 8.279s (loader) + 5.461s (kernel) + 8.030s (userspace) = 26.003s 
graphical.target reached after 6.753s in userspace

Code: Select all

systemd-analyze	(No Nvidia driver)
Startup finished in 3.408s (firmware) + 5.449s (loader) + 5.588s (kernel) + 21.214s (userspace) = 35.660s 
graphical.target reached after 21.207s in userspace
Top
Locked

Return to “Hardware Support”