[WORKEDAROUND] LMDE3 4Gb only seen as 1Gb
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
[WORKEDAROUND] LMDE3 4Gb only seen as 1Gb
on a Linux Mint Debian Edition (LMDE) 3 Cindy system i.e. Debian 9.4 based running Cinnamon the unit has 4Gb (though 512Mb shared for graphics) but only 1Gb shows as system total?
BIOS shows 4Gb
MemTest shows 3060Mb
but in LMDE3 System Info shows 1Gib
free -h shows Total Mem: 993M
inxi -Fxn under info: shows Memory 993.1Mib
thoughts?
BIOS shows 4Gb
MemTest shows 3060Mb
but in LMDE3 System Info shows 1Gib
free -h shows Total Mem: 993M
inxi -Fxn under info: shows Memory 993.1Mib
thoughts?
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 3 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
- antikythera
- Level 15
- Posts: 5721
- Joined: Thu Jul 02, 2020 12:52 pm
- Location: Cymru
Re: LMDE3 4Gb only seen as 1Gb
please post the full output of the following. Nothing personally identifiable to you or your machine will be revealed. put it in code brackets too please. Select all the pasted content and click the 5th button in on the post toolbar that looks like this </>
Code: Select all
inxi -Fxmz
I’ll tell you a DNS joke but be advised, it could take up to 24 hours for everyone to get it.
Re: LMDE3 4Gb only seen as 1Gb
Code: Select all
$ inxi -Fxmz
System: Host: loanunit Kernel: 4.9.0-13-686 i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: Cinnamon 4.2.4
Distro: LMDE 3 Cindy base: Debian 9.3 stretch
Machine: Type: Desktop Mobo: ASRock model: N3050B-ITX serial: <filter> UEFI [Legacy]: American Megatrends v: P1.20
date: 06/02/2015
Memory: RAM: total: 992.9 MiB used: 493.9 MiB (49.7%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Topology: Dual Core model: Intel Celeron N3050 bits: 64 type: MCP arch: Airmont rev: 3 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6400
Speed: 1245 MHz min/max: 480/2160 MHz Core speeds (MHz): 1: 1245 2: 480
Graphics: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics vendor: ASRock driver: i915
v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa resolution: 1440x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (Braswell) x86/MMX/SSE2 v: 4.5 Mesa 13.0.6 direct render: Yes
Audio: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio vendor: ASRock
driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.9.0-13-686
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169 v: 2.3LK-NAPI
port: e000 bus ID: 02:00.0
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 149.01 GiB used: 16.11 GiB (10.8%)
ID-1: /dev/sda vendor: Seagate model: ST3160815AS size: 149.01 GiB
Partition: ID-1: / size: 77.82 GiB used: 16.11 GiB (20.7%) fs: ext4 dev: /dev/sda1
Sensors: System Temperatures: cpu: 26.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 151 Uptime: 42m Init: systemd runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.32
Re: LMDE3 4Gb only seen as 1Gb
What does 'sudo dmidecode -t memory' give you?
Re: LMDE3 4Gb only seen as 1Gb
Code: Select all
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x000A, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000C, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: A1_DIMM0
Bank Locator: A1_BANK0
Type: DDR3
Type Detail: Unknown
Speed: 1600 MHz
Manufacturer: Undefined
Serial Number: 00000000
Asset Tag: A1_AssetTagNum0
Part Number: PSD31600C114GVS
Rank: 1
Configured Clock Speed: 1600 MHz
Minimum Voltage: 1.5 V
Maximum Voltage: 1.5 V
Configured Voltage: 1.35 V
Handle 0x000E, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: A1_DIMM1
Bank Locator: A1_BANK1
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: A1_Manufacturer1
Serial Number: A1_SerNum1
Asset Tag: A1_AssetTagNum1
Part Number: Array1_PartNumber1
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Re: LMDE3 4Gb only seen as 1Gb
So the 4GB ram module is there but seems not to be reported by inxi? Beats me why.
Maybe check memory usage with 'free -h' too.
If that gives you the proper values, then ignore the wrong system info.
Maybe check memory usage with 'free -h' too.
If that gives you the proper values, then ignore the wrong system info.
Re: LMDE3 4Gb only seen as 1Gb
see intial (poorly formatted) post free -h shows 993M ... basically unit used to be fine ... there somewhere along line it would appear to have decided there is only 1Gb and it struggles to open more than one application and the longer you leave it the more the hard disk drive thrashes (suspect it is continually swapping ...
Re: LMDE3 4Gb only seen as 1Gb
gave up. did fresh install of LMDE4 all working, full RAM now seen by inxi and system.
- antikythera
- Level 15
- Posts: 5721
- Joined: Thu Jul 02, 2020 12:52 pm
- Location: Cymru
Re: LMDE3 4Gb only seen as 1Gb
Fair enough, it's supported for longer too which is a bonus.
Running the 32-bit non-PAE kernel with LMDE3 wouldn't have helped matters. Did you at least install 64-bit LMDE4 this time?
CPU: Topology: Dual Core model: Intel Celeron N3050 bits: 64 type: MCP arch: Airmont rev: 3 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6400
Either way, please edit your first post and add [SOLVED] to the title.
Running the 32-bit non-PAE kernel with LMDE3 wouldn't have helped matters. Did you at least install 64-bit LMDE4 this time?
CPU: Topology: Dual Core model: Intel Celeron N3050 bits: 64 type: MCP arch: Airmont rev: 3 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6400
Either way, please edit your first post and add [SOLVED] to the title.
I’ll tell you a DNS joke but be advised, it could take up to 24 hours for everyone to get it.
Re: [WORKEDAROUND] LMDE3 4Gb only seen as 1Gb
yes I installed 64bit version.
I updated with [WORKEDAROUND], the issue of why LMDE3 after having had 3+Gb for couple of years suddenly deciding it only thought it had 1Gb while BIOS and MemTest86 and LMDE4 confirmed presence of 4Gb chip was not solved as such.
I updated with [WORKEDAROUND], the issue of why LMDE3 after having had 3+Gb for couple of years suddenly deciding it only thought it had 1Gb while BIOS and MemTest86 and LMDE4 confirmed presence of 4Gb chip was not solved as such.