drivers for hp laserjet pro
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
drivers for hp laserjet pro
how can I have support for driver of HP laserjet Pro MFP M26nw? Tha scanner works with LMDE 4 but not with LMDE 5. Thanks!
Last edited by LockBot on Wed Mar 15, 2023 10:00 pm, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: drivers for hp laserjet pro
If on a USB connection, run 'sane-find-scanner'.
Re: drivers for hp laserjet pro
Download hplip and it will automatically install whats needed:
https://developers.hp.com/hp-linux-imag ... anguage=en
https://sourceforge.net/projects/hplip/ ... irror=nchc
https://123.hp.com/pr/en/devices/LJM26NW
https://developers.hp.com/hp-linux-imag ... anguage=en
https://sourceforge.net/projects/hplip/ ... irror=nchc
https://123.hp.com/pr/en/devices/LJM26NW
"Tolerance is the refuge of men without conviction."
"Common sense is not so common" - Voltaire
"Common sense is not so common" - Voltaire
Re: drivers for hp laserjet pro
Jwiz=
lmdefive@lmdefive:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x248a/0x00da at 001:007: Access denied (insufficient permissions)
found USB scanner (vendor=0x03f0 [HP], product=0x932a [HP LaserJet Pro MFP M26nw]) at libusb:001:012
could not open USB device 0x05e3/0x0610 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x145f/0x01e5 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x26ce/0x01a2 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x0c46/0x64ab at 001:013: Access denied (insufficient permissions)
could not open USB device 0x0a12/0x0001 at 001:010: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc534 at 001:009: Access denied (insufficient permissions)
could not open USB device 0x1a40/0x0101 at 001:008: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
lmdefive@lmdefive:~$ scanimage -L
device `hpaio:/usb/HP_LaserJet_Pro_MFP_M26nw?serial=CNBKL3D89M' is a Hewlett-Packard HP_LaserJet_Pro_MFP_M26nw all-in-one
device `hpaio:/net/hp_laserjet_pro_mfp_m26nw?ip=192.168.1.23&queue=false' is a Hewlett-Packard hp_laserjet_pro_mfp_m26nw all-in-one
lmdefive@lmdefive:~$
lmdefive@lmdefive:~$
Joe2Shoe:
Sorry but after dowload says= caracters not valid
have you some ideas? Thanks!!!
lmdefive@lmdefive:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x248a/0x00da at 001:007: Access denied (insufficient permissions)
found USB scanner (vendor=0x03f0 [HP], product=0x932a [HP LaserJet Pro MFP M26nw]) at libusb:001:012
could not open USB device 0x05e3/0x0610 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x145f/0x01e5 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x26ce/0x01a2 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x0c46/0x64ab at 001:013: Access denied (insufficient permissions)
could not open USB device 0x0a12/0x0001 at 001:010: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc534 at 001:009: Access denied (insufficient permissions)
could not open USB device 0x1a40/0x0101 at 001:008: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
lmdefive@lmdefive:~$ scanimage -L
device `hpaio:/usb/HP_LaserJet_Pro_MFP_M26nw?serial=CNBKL3D89M' is a Hewlett-Packard HP_LaserJet_Pro_MFP_M26nw all-in-one
device `hpaio:/net/hp_laserjet_pro_mfp_m26nw?ip=192.168.1.23&queue=false' is a Hewlett-Packard hp_laserjet_pro_mfp_m26nw all-in-one
lmdefive@lmdefive:~$
lmdefive@lmdefive:~$
Joe2Shoe:
Sorry but after dowload says= caracters not valid
have you some ideas? Thanks!!!
Re: drivers for hp laserjet pro
Check if libsane-hpaio is already installed on your system (apt search ...).
Then you should 'sudo apt remove' any hplip-package still lingering on your system.
Due to the change to driverless printing in Debian 11 hplip will not work with scanners (unless you install the hp-plugin from HP).
P.S.
you might need to do a 'systemctl restart cups-browsed' after that.
Then you should 'sudo apt remove' any hplip-package still lingering on your system.
Due to the change to driverless printing in Debian 11 hplip will not work with scanners (unless you install the hp-plugin from HP).
P.S.
you might need to do a 'systemctl restart cups-browsed' after that.
Re: drivers for hp laserjet pro
ehmmmm. Sorry, but it's out of my reach
Re: drivers for hp laserjet pro
Try this, in the Terminal (per jwiz, modded)
Check if libsane-hpaio is already installed on your system:
apt search libsane-hpaio
Then you should 'sudo apt remove' any hplip-package on your system:
sudo apt remove hplip
Install hp-plugin:
https://developers.hp.com/hp-linux-imag ... ng/plugins
Try these: Right-click, Save Link As.
hplip-3.22.6-plugin.run
hplip-3.22.6-plugin.run.asc
You might need to do a 'systemctl restart cups-browsed' after that:
systemctl restart cups-browsed
Check if libsane-hpaio is already installed on your system:
apt search libsane-hpaio
Then you should 'sudo apt remove' any hplip-package on your system:
sudo apt remove hplip
Install hp-plugin:
https://developers.hp.com/hp-linux-imag ... ng/plugins
Try these: Right-click, Save Link As.
hplip-3.22.6-plugin.run
hplip-3.22.6-plugin.run.asc
You might need to do a 'systemctl restart cups-browsed' after that:
systemctl restart cups-browsed
"Tolerance is the refuge of men without conviction."
"Common sense is not so common" - Voltaire
"Common sense is not so common" - Voltaire
Re: drivers for hp laserjet pro
You ONLY need the hplip-plugin if you are still using HP's own hplip driver package.Joe2Shoe wrote: ⤴Thu Sep 22, 2022 5:56 pm Try this, in the Terminal (per jwiz, modded)
...
Install hp-plugin:
https://developers.hp.com/hp-linux-imag ... ng/plugins
Try these: Right-click, Save Link As.
hplip-3.22.6-plugin.run
hplip-3.22.6-plugin.run.asc
...
The libsane-hpaio will take care of that when using driverless printing.
Re: drivers for hp laserjet pro
Just view this topic.
AMD Ryzen 7 3700X - 32GB DDR4 RGB White - RTX4060TI O8GB White- SSD NVME Crucial P5 500GB - Mobo Gigabyte AORUS ELITE B550 V2 - PSU Corsair RM750 White - Case Corsair 5000D Airflow White 7 fans AF120 ARGB - AIO Corsair H100I Cappelix 240 White
Re: drivers for hp laserjet pro
gionbraun wrote: ⤴Sun Sep 18, 2022 10:04 pm Jwiz=
lmdefive@lmdefive:~$ sane-find-scanner
lmdefive@lmdefive:~$ scanimage -L
device `hpaio:/usb/HP_LaserJet_Pro_MFP_M26nw?serial=CNBKL3D89M' is a Hewlett-Packard HP_LaserJet_Pro_MFP_M26nw all-in-one
device `hpaio:/net/hp_laserjet_pro_mfp_m26nw?ip=192.168.1.23&queue=false' is a Hewlett-Packard hp_laserjet_pro_mfp_m26nw all-in-one
lmdefive@lmdefive:~$
lmdefive@lmdefive:~$
Joe2Shoe:
Sorry but after dowload says= caracters not valid
have you some ideas? Thanks!!!
I've been fiddling with my old HP Photosmart AiO trying to reproduce your problem.
There might be a very simple solution to your scanner problem.
It seems that there are 2 configs for the printer/scanner in your system.
I assume they are the old LMDE4 and new LMDE5 ones.
If you run the 'simple-scan' application it should search for available devices and finds both.
Just switch to the other device config in the drop-down menu there.
That'll do the trick.