SOLVED: This is solved but here is how. The day after I posted this, my PC kept freezing on me and I had to manually shut down, then it wouldn't boot up at all. It kept stating that there was a /dev/sdb3 contains a file system with errors, check forced. Inodes that were part of a corrupted orphan linked list found: Run gack manually w/o -a or -p options.
Then it kept asking to do a forced check of some sort and I had no idea what to do. Even looking it up on my phone I couldn't get to anything because it wouldn't let me get to anywhere on the PC. So I just plugged in a Memory Drive with Ventoy and some Distro's ISO's on it and tried from there. Did all the disk checks I could find and all had errors but nothing I understood. So I was able to save all my data on to an external Drive and them install a fresh copy of LMDE 5 and of course wiped all the HDD's clean. Now it is able to properly do a restart/reboot. Been over 48 hours and so far it is running smoothly. If it persists later on, I will thing it might be a HDD physical issue and will just replace with others I have and test it out.
Been using LMDE 4 and did the upgrade to 5 and my PC will not be able to reboot/restart. I select to restart and it does look like it is properly doing shut down items and my TV that I use as a monitor goes to blue screen since there is nothing on shutdown/reboot till the BIOS kicks in. Well, my PC just sits there with nothing on screen and nothing happening. I physically have to press and hold the Power button to shut it down or press the mini restart button I have. This started after LMDE 5 upgrade and doing all the updates. I decided to just do a full fresh wipe and clean re install, no biggie on my side anyways. The issue still happens. I did make sure of the checksum on the new LMDE 5 ISO I downloaded as well, all was good. Otherwise, my PC works really well besides the restart. Shut down is fine to. I only do restarts when I do updates and it requests to do so after installation.
Please help and thank you for your time and sorry for the long post.
Code: Select all
System: Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: Cinnamon 5.4.9
tk: GTK 3.24.24 wm: Mutter dm: LightDM Distro: LMDE 5 Elsie base: Debian 11.2 bullseye
Machine: Type: Desktop Mobo: ASRock model: 970 Extreme3 serial: <filter>
UEFI: American Megatrends v: P1.80 date: 07/31/2013
CPU: Info: 6-Core model: AMD FX-6350 bits: 64 type: MCP arch: Bulldozer rev: 0
L2 cache: 2 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 45467
Speed: 1360 MHz min/max: 1400/3900 MHz boost: enabled Core speeds (MHz): 1: 1360
2: 1357 3: 1360 4: 1360 5: 1359 6: 1358
Graphics: Device-1: AMD Curacao XT / Trinidad XT [Radeon R7 370 / R9 270X/370X]
vendor: Micro-Star MSI driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6810
Display: x11 server: X.Org 1.20.11 driver: loaded: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz s-dpi: 96
OpenGL: renderer: AMD PITCAIRN (DRM 2.50.0 5.10.0-16-amd64 LLVM 11.0.1)
v: 4.5 Mesa 20.3.5 direct render: Yes
Audio: Device-1: AMD SBx00 Azalia vendor: ASRock driver: snd_hda_intel v: kernel
bus ID: 00:14.2 chip ID: 1002:4383
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1
chip ID: 1002:aab0
Sound Server: ALSA v: k5.10.0-16-amd64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock
driver: r8169 v: kernel port: d000 bus ID: 05:00.0 chip ID: 10ec:8168
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 7.24 TiB used: 4.21 TiB (58.1%)
ID-1: /dev/sda vendor: Western Digital model: WD5000AAKS-00Z7B0 size: 465.76 GiB
speed: <unknown> serial: <filter>
ID-2: /dev/sdb vendor: Toshiba model: MQ01ABD032 size: 298.09 GiB speed: 3.0 Gb/s
serial: <filter>
ID-3: /dev/sdc vendor: Seagate model: ST320LT023-1AF142 size: 298.09 GiB
speed: 3.0 Gb/s serial: <filter>
ID-4: /dev/sdd vendor: Samsung model: HM321HI size: 298.09 GiB speed: 3.0 Gb/s
serial: <filter>
ID-5: /dev/sde vendor: Toshiba model: MQ01ABF050 size: 465.76 GiB speed: 6.0 Gb/s
serial: <filter>
ID-6: /dev/sdf type: USB vendor: Western Digital model: WD My Passport 0741
size: 931.48 GiB serial: <filter>
ID-7: /dev/sdg type: USB vendor: Seagate model: BUP Slim BK size: 931.51 GiB
serial: <filter>
ID-8: /dev/sdh type: USB vendor: Western Digital model: WD Elements 2667 size: 3.64 TiB
serial: <filter>
Partition: ID-1: / size: 284 GiB used: 137.67 GiB (48.5%) fs: ext4 dev: /dev/sdb3
ID-2: /boot/efi size: 285.4 MiB used: 3.4 MiB (1.2%) fs: vfat dev: /dev/sdb1
Swap: ID-1: swap-1 type: partition size: 8.2 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sdb2
USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003
Device-1: 6-2:2 info: Western Digital My Passport Ultra type: Mass Storage
driver: usb-storage rev: 3.0 speed: 5 Gb/s chip ID: 1058:0741
Device-2: 6-3:3 info: Western Digital Elements 2667 type: Mass Storage
driver: usb-storage rev: 3.1 speed: 5 Gb/s chip ID: 1058:2667
Device-3: 6-4:4 info: Seagate RSS LLC Backup Plus Slim Portable Drive 1 TB
type: Mass Storage driver: uas rev: 3.0 speed: 5 Gb/s chip ID: 0bc2:ab26
Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 speed: 480 Mb/s
chip ID: 1d6b:0002
Hub-8: 8-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-1: 8-1:2 info: Logitech M105 Optical Mouse type: Mouse
driver: hid-generic,usbhid rev: 2.0 speed: 1.5 Mb/s chip ID: 046d:c077
Device-2: 8-2:3 info: Primax Acer Elite USB Keyboard type: Keyboard,HID
driver: hid-generic,usbhid rev: 1.1 speed: 1.5 Mb/s chip ID: 0461:4e99
Hub-9: 9-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub-10: 10-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub-11: 11-0:1 info: Full speed (or root) Hub ports: 4 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 32.8 C mobo: N/A gpu: radeon temp: 53.0 C
Fan Speeds (RPM): N/A
Repos: Packages: 2609 apt: 2588 flatpak: 21
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com elsie main upstream import backport
2: deb https: //deb.debian.org/debian/ bullseye main contrib non-free
3: deb https: //deb.debian.org/debian/ bullseye-updates main contrib non-free
4: deb http: //security.debian.org/ bullseye-security main contrib non-free
5: deb https: //deb.debian.org/debian/ bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/winehq-bullseye.sources
1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/debian bullseye main
Info: Processes: 217 Uptime: 18m Memory: 11.65 GiB used: 2.16 GiB (18.5%) Init: systemd
v: 247 runlevel: 5 Compilers: gcc: 10.2.1 alt: 10 Client: Unknown python3.9 client
inxi: 3.3.01