Installing Cannon CanoScan Lide Scanner

Write tutorials here
There are more tutorials here http://community.linuxmint.com/tutorial/welcome
Forum rules
Please don't add support questions to tutorials,start your own thread in the appropriate sub-forum instead. Before you post please read this
Post Reply
User avatar
MintBean
Level 9
Level 9
Posts: 2968
Joined: Fri Aug 07, 2015 6:54 am
Location: Blighty

Installing Cannon CanoScan Lide Scanner

Post by MintBean » Mon Nov 20, 2017 2:15 pm

These instructions were tested with Mint 18 and a Lide220 Scanner.

1. Connect scanner via USB cable to the computer.
2. [Optional - check device is recognised] Type lsusb in a terminal window. You should see a line pertaining to the scanner. In my case it was:
Bus 004 Device 003: ID 04a9:190f Canon, Inc.
3. Install xsane:
apt update && apt install gocr libusb-dev libsane-dev libsane-extras xsane-common xsane
4. Launch 'Users and Groups' from the Mint Menu. Select your user and click on the list of groups in the groups section. Add ticks to the boxes 'saned' and 'scanner' to add yourself to those groups.
5. You can now run XSane scanner software from the Mint Menu and it should recognise the printer. Ensure the physical plastic lock on the underside of the scanner is slid to the unlocked position before scanning otherwise you will get a blank scan and it may not be too healthy for the scanner.

Topenda
Level 1
Level 1
Posts: 1
Joined: Thu Jan 11, 2018 3:34 am

Re: Installing Cannon CanoScan Lide Scanner

Post by Topenda » Thu Jan 11, 2018 3:38 am

Thank you! Works like a charm on my Mint 18.3 MATE installation with a Canon LIDE 25 :).

User avatar
MintBean
Level 9
Level 9
Posts: 2968
Joined: Fri Aug 07, 2015 6:54 am
Location: Blighty

Re: Installing Cannon CanoScan Lide Scanner

Post by MintBean » Mon Apr 09, 2018 3:23 pm

You're welcome friend. :)

Post Reply

Return to “Tutorials”