[Solved] Kernel Panic on Boot with 5.15.0-56

[S4qFBxkFFg]

Every time I try to boot kernel 5.15.0-56 I get the error in the linked picture:
https://cdn.imgchest.com/files/pyq9cnwod42.jpg

I think the problematic part is:

Code: Select all

VFS: Cannot open root device "nvme0n1p2" or unknown-block(0,0): error -6

Before I do anything to fix it (such as https://askubuntu.com/questions/41930/k ... n-block0-0 ), I'd like to see if anyone here has encountered this yet, specifically on Mint.

Kernel 5.15.0-52 is unaffected (5.15.0-53 fails to boot for a different reason).

[deepakdeshp]

Please check your disk.

[S4qFBxkFFg]

Please check your disk.

This is what I get:

Code: Select all

smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-52-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       GIGABYTE GP-AG41TB
Serial Number:                      SN203108933306
Firmware Version:                   EGFM11.3
PCI Vendor/Subsystem ID:            0x1987
IEEE OUI Identifier:                0x6479a7
Total NVM Capacity:                 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity:           0
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,000,204,886,016 [1.00 TB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            6479a7 3aa166821a
Local Time is:                      Sun Dec  4 13:41:21 2022 GMT
Firmware Updates (0x12):            1 Slot, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005d):     Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x08):         Telmtry_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     90 Celsius
Critical Comp. Temp. Threshold:     95 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     9.78W       -        -    0  0  0  0        0       0
 1 +     6.75W       -        -    1  1  1  1        0       0
 2 +     5.23W       -        -    2  2  2  2        0       0
 3 -   0.0490W       -        -    3  3  3  3     2000    2000
 4 -   0.0018W       -        -    4  4  4  4    25000   25000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         2
 1 -    4096       0         1

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

[deepakdeshp]

Some kernels id they don't work should be removed. update manager--view--kernels.

[SMG]

Kernel 5.15.0-52 is unaffected (5.15.0-53 fails to boot for a different reason).

Please let us know those reasons and please provide system information. Open the System Reports app and click the System Information tab on the left. Your computer's information should come up in the right pane. Then click Copy, and paste the results into a reply window here so we can see how Linux Mint views your hardware.

[S4qFBxkFFg]

Kernel 5.15.0-52 is unaffected (5.15.0-53 fails to boot for a different reason).

Please let us know those reasons and please provide system information. Open the System Reports app and click the System Information tab on the left. Your computer's information should come up in the right pane. Then click Copy, and paste the results into a reply window here so we can see how Linux Mint views your hardware.

System info below.
I think the problem with 5.15.0-53 is the same as described in this bug: https://bugs.launchpad.net/ubuntu/+sour ... ug/1996740

Code: Select all

System:
  Kernel: 5.15.0-52-generic x86_64 bits: 64 compiler: gcc v: 11.2.0 Desktop: Xfce 4.16.0
    tk: Gtk 3.24.23 wm: xfwm dm: LightDM Distro: Linux Mint 21 Vanessa base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop System: Gigabyte product: X570 I AORUS PRO WIFI v: -CF
    serial: <superuser required>
  Mobo: Gigabyte model: X570 I AORUS PRO WIFI serial: <superuser required>
    BIOS: American Megatrends LLC. v: F36d date: 07/20/2022
CPU:
  Info: 8-core model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3 rev: 0 cache:
    L1: 512 KiB L2: 4 MiB L3: 32 MiB
  Speed (MHz): avg: 3822 high: 4635 min/max: 2200/4850 boost: enabled cores: 1: 3718 2: 3736
    3: 3706 4: 3710 5: 3708 6: 3700 7: 4635 8: 3706 9: 3629 10: 3624 11: 3712 12: 3841 13: 3701
    14: 3700 15: 4630 16: 3701 bogomips: 121609
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] vendor: Tul driver: amdgpu
    v: kernel pcie: speed: 16 GT/s lanes: 16 ports: active: DP-2 empty: DP-1,HDMI-A-1
    bus-ID: 0b:00.0 chip-ID: 1002:731f
  Device-2: Logitech QuickCam Pro 9000 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-3.1:3
    chip-ID: 046d:0990
  Display: x11 server: X.Org v: 1.21.1.3 compositor: xfwm v: 4.16.1 driver: X:
    loaded: amdgpu,ati unloaded: fbdev,modesetting,radeon,vesa gpu: amdgpu display-ID: :0.0
    screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96
  Monitor-1: DisplayPort-1 mapped: DP-2 model: Dell U2412M res: 1920x1200 dpi: 94
    diag: 611mm (24.1")
  OpenGL: renderer: AMD Radeon RX 5600 XT (navi10 LLVM 13.0.1 DRM 3.42 5.15.0-52-generic)
    v: 4.6 Mesa 22.0.5 direct render: Yes
Audio:
  Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
    bus-ID: 0b:00.1 chip-ID: 1002:ab38
  Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
    speed: 16 GT/s lanes: 16 bus-ID: 0d:00.4 chip-ID: 1022:1487
  Device-3: Logitech QuickCam Pro 9000 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-3.1:3
    chip-ID: 046d:0990
  Sound Server-1: ALSA v: k5.15.0-52-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel pcie:
    speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 8086:1539
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
    bus-ID: 05:00.0 chip-ID: 8086:2723
  IF: wlp5s0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2:3 chip-ID: 8087:0029
  Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
    hardware: no software: yes address: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 507.48 GiB (54.5%)
  ID-1: /dev/nvme0n1 vendor: Gigabyte model: GP-AG41TB size: 931.51 GiB speed: 63.2 Gb/s
    lanes: 4 serial: <filter> temp: 44.9 C
Partition:
  ID-1: / size: 228.12 GiB used: 32.09 GiB (14.1%) fs: ext4 dev: /dev/nvme0n1p2
  ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat dev: /dev/nvme0n1p1
  ID-3: /home size: 686.15 GiB used: 475.38 GiB (69.3%) fs: ext4 dev: /dev/nvme0n1p3
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Device-1: 1-1:2 info: Integrated Express IT8297 RGB LED Controller type: Keyboard
    driver: hid-generic,usbhid rev: 2.0 speed: 12 Mb/s chip-ID: 048d:8297
  Device-2: 1-2:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb rev: 2.0
    speed: 12 Mb/s chip-ID: 8087:0029
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Hub-4: 3-3:2 info: Microchip (formerly SMSC) USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 0424:2514
  Device-1: 3-3.1:3 info: Logitech QuickCam Pro 9000 type: Video,Audio
    driver: snd-usb-audio,uvcvideo rev: 2.0 speed: 480 Mb/s chip-ID: 046d:0990
  Device-2: 3-3.2:4 info: Cherry GmbH Mouse type: Mouse driver: hid-generic,usbhid rev: 2.0
    speed: 1.5 Mb/s chip-ID: 046a:b091
  Device-3: 3-3.3:7 info: Google Nexus/Pixel Device (MTP) type: <vendor specific> driver: usbfs
    rev: 2.1 speed: 480 Mb/s chip-ID: 18d1:4ee1
  Hub-5: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
  Hub-6: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002
  Device-1: 5-2:2 info: Kingston HyperX Alloy Origins type: Keyboard,HID
    driver: hid-generic,usbhid rev: 2.0 speed: 12 Mb/s chip-ID: 0951:16e5
  Hub-7: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
Sensors:
  System Temperatures: cpu: 43.0 C mobo: 16.8 C gpu: amdgpu temp: 45.0 C mem: 46.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos:
  Packages: apt: 1926
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https: //dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
    1: deb [arch=amd64] http: //dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb https: //www.mirrorservice.org/sites/packages.linuxmint.com/packages vanessa main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/teams.list
    1: deb [arch=amd64] https: //packages.microsoft.com/repos/ms-teams stable main
Info:
  Processes: 423 Uptime: 3h 57m Memory: 31.27 GiB used: 5.66 GiB (18.1%) Init: systemd v: 249
  runlevel: 5 Compilers: gcc: 11.3.0 alt: 11 Client: Unknown python3.10 client inxi: 3.3.13

[SMG]

System info below.
I think the problem with 5.15.0-53 is the same as described in this bug: https://bugs.launchpad.net/ubuntu/+sour ... ug/1996740

That looks to be a likely issue.

Your system has a 5000 series Ryzen and it is likely to run better with a newer kernel. Right now, there are two newer kernels available. See if a newer one helps. I suggest trying the 5.17-oem first because a few people (not all) have mentioned running into sound issues with the 6.0-oem.

You can install the latest 5.17-oem kernel with

Code: Select all

sudo apt-get install linux-oem-22.04

and reboot. If there are any errors in the output, post them here because they might be a clue as to why the -56 kernel did not work on your system.

You can install the latest 6.0-oem kernel with

Code: Select all

sudo apt-get install linux-oem-22.04b

and reboot.

[S4qFBxkFFg]

I suggest trying the 5.17-oem first because a few people (not all) have mentioned running into sound issues with the 6.0-oem.

You can install the latest 5.17-oem kernel with

Code: Select all

sudo apt-get install linux-oem-22.04

and reboot. If there are any errors in the output, post them here because they might be a clue as to why the -56 kernel did not work on your system.

Thank you, that worked. I can't see anything obvious that indicates errors in /var/log/dmesg , but I wouldn't necessarily know what to expect there.

[SMG]

Thank you, that worked. I can't see anything obvious that indicates errors in /var/log/dmesg , but I wouldn't necessarily know what to expect there.

Good to hear it worked. I meant errors showing on the terminal screen when you ran the command.