How to make linux single from dual boot?

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
verhooo
Level 1
Level 1
Posts: 2
Joined: Sat Nov 18, 2017 7:11 am

How to make linux single from dual boot?

Postby verhooo » Sat Nov 18, 2017 7:14 am

I installed linux mint along with windows 10, on 2 partitions.
Now that i like the linux, i want to make it permament with 1 partition, How?

michael louwe
Level 6
Level 6
Posts: 1184
Joined: Sun Sep 11, 2016 11:18 pm

Re: How to make linux single from dual boot?

Postby michael louwe » Sat Nov 18, 2017 7:40 am

Best to backup your data and reinstall LM as a single-boot.

User avatar
Pjotr
Level 19
Level 19
Posts: 9002
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland)
Contact:

Re: How to make linux single from dual boot?

Postby Pjotr » Sat Nov 18, 2017 8:05 am

michael louwe wrote:Best to backup your data and reinstall LM as a single-boot.

That's definitely not necessary.

Best (most simple) approach: boot Mint from the DVD, launch GParted, and format the Windows partition(s) into a big storage partition (EXT4). You can use that for "dumb" storage from then on.

Then boot into your installed Mint and run this command:

Code: Select all

sudo update-grub
Tip: 10 things to do after installing Linux Mint 18.3 Sylvia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.

michael louwe
Level 6
Level 6
Posts: 1184
Joined: Sun Sep 11, 2016 11:18 pm

Re: How to make linux single from dual boot?

Postby michael louwe » Sat Nov 18, 2017 8:19 am

@ Pjotr, .......

Pjotr wrote:That's definitely not necessary.

Best (most simple) approach: boot Mint from the DVD, launch GParted, and format the Windows partition(s) into a big storage partition (EXT4). You can use that for "dumb" storage from then on.

Then boot into your installed Mint and run this command:

Code: Select all
sudo update-grub.

.
It is always better and faster to install the / or root or system partition at the beginning of the disk for a single-boot system, especially for a HDD.

Your recommendation will have the Linux / partition remain at or near the end of the disk = slower system. Also, your recommendation will likely bork the whole system because the Windows Boot Partition where Grub is installed has been formatted or deleted.

That is also why the MBR Boot Partition or EFI System/Boot Partition and their associated bootloaders should be installed at the beginning of the disk = faster boot time.

User avatar
catweazel
Level 10
Level 10
Posts: 3476
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: How to make linux single from dual boot?

Postby catweazel » Sat Nov 18, 2017 8:27 am

michael louwe wrote:It is always better and faster to install the / or root or system partition at the beginning of the disk for a single-boot system, especially for a HDD.

Your recommendation will have the Linux / partition remain at or near the end of the disk = slower system.

Slower by how much? 0.5 milliseconds?
If your problem is fixed, please mark your thread as [SOLVED] by editing the title of the first message in the thread.

User avatar
Pjotr
Level 19
Level 19
Posts: 9002
Joined: Mon Mar 07, 2011 10:18 am
Location: The Netherlands (Holland)
Contact:

Re: How to make linux single from dual boot?

Postby Pjotr » Sat Nov 18, 2017 10:08 am

michael louwe wrote:Your recommendation will have the Linux / partition remain at or near the end of the disk = slower system.

That has already been debunked by catweazel, so I won't comment on that.

Also, your recommendation will likely bork the whole system because the Windows Boot Partition where Grub is installed has been formatted or deleted.

Obviously, that partition shouldn't be touched because it's not a Windows partition, but a general purpose partition which also caters to Linux. It's indeed useful to point this out to the OP.
Tip: 10 things to do after installing Linux Mint 18.3 Sylvia
Keep your Linux Mint healthy: Avoid these 10 fatal mistakes
Twitter: twitter.com/easylinuxtips
All in all, horse sense simply makes sense.

mr_raider
Level 6
Level 6
Posts: 1277
Joined: Sun Jun 20, 2010 9:50 am
Location: Montreal, QC

Re: How to make linux single from dual boot?

Postby mr_raider » Sat Nov 18, 2017 10:54 am

Let's cut the fud.

Open a terminal and post the output of

Code: Select all

sudo parted -l
Image

User avatar
Flemur
Level 13
Level 13
Posts: 4635
Joined: Mon Aug 20, 2012 9:41 pm
Location: Potemkin Village

Re: How to make linux single from dual boot?

Postby Flemur » Sat Nov 18, 2017 11:20 am

Pjotr wrote:
michael louwe wrote:Your recommendation will have the Linux / partition remain at or near the end of the disk = slower system.

That has already been debunked by catweazel, so I won't comment on that..

His statement (an absolute time) didn't make any sense when speaking of transfer speeds, so I wouldn't call it a debunking; I'd call it a conceptual error.

https://www.pcworld.com/article/255224/ ... mance.html
"For this article, we tested a 1TB Western Digital Velociraptor drive and initially saw transfer rates in the vicinity of 210 megabytes per second, which gradually slowed to about 116 MBps. Similarly, access times were fastest in the early part of the test and grew slower as the test progressed. This phenomenon occurs because hard drives are fastest when they access data from the outermost tracks on its platters. Given a constant spindle speed (10,000 rpm, in the Velociraptor's case), the drive's read/write heads can simply cover a larger area in a shorter amount of time when positioned over the outer edges of the platter, resulting in better performance.

For optimal system performance, you need to place your OS and all of your most commonly used applications and files in the fastest areas on the drive. "

Here the outer tracks are 2X faster than the inner tracks:
https://books.google.com/books?id=G-eoC ... &q&f=false
Mint 18.3 Xfce/fluxbox/pulse-less
Xubuntu 17.10/fluxbox/pulse-less
Please edit your original post title to include [SOLVED] if/when it is solved!
Your data and OS are backed up....right?

michael louwe
Level 6
Level 6
Posts: 1184
Joined: Sun Sep 11, 2016 11:18 pm

Re: How to make linux single from dual boot?

Postby michael louwe » Sat Nov 18, 2017 2:25 pm

@ verhooo, .......

verhooo wrote:.

.
For an SSD, you should follow Pjotr's recommendation. Likely, you will not experience any system lag afterwards.
... For an SSD, it makes little difference how you partition it, whether at the beginning or end of the drive, except that it is also recommended to leave an unpartitioned free space of about 10% in the SSD for wear-levelling purposes and the need to optimize the SSD ...
https://sites.google.com/site/easylinuxtipsproject/ssd

My recommendation was mostly geared towards a rotating HDD.

User avatar
jimallyn
Level 16
Level 16
Posts: 6945
Joined: Thu Jun 05, 2014 7:34 pm
Location: Wenatchee, WA USA

Re: How to make linux single from dual boot?

Postby jimallyn » Sat Nov 18, 2017 7:52 pm

gparted can move your current Linux partition at the end of the drive to the beginning of the drive, if it matters. If you've got a lot of data to move it will take a while, but it will do it.
Image

“If the government were coming for your TVs and cars, then you'd be upset. But, as it is, they're only coming for your sons.” - Daniel Berrigan


Return to “Installation & Boot”