[SOLVED] Linux stops after Grub

[Irakus]

Hi, I cannot install Linux Mint( and other Linux Distributions as well ) on my notebook. I get the Grub screen, but after I press Enter, I'm getting blackscreen. It looks like notebook stops working, because if I use Live USB, the pendrive's light turns off, and when I use external DVD, it becomes silent, like nothing is happening. I'm 100% sure my USB/DVD are ok, because I tested them on another PC, and installed Linux succesfully. I had Linux installed on my notebook before, but after I send it to support ( they had to repair my disk ) , I can't install Linux anymore. I made sure to update my BIOS to latest version, tested both Legacy and UEFI boot. I've also tried "nomodeset" and similar commands to check if it's problem with graphics.

[jglen490]

Notebook specs?

Please the following in a terminal and post the output to a code box.

Code: Select all

inxi -Fxz

[Irakus]

Since I can't get to the terminal because I don't have Linux, I'll write what I know:
Notebook Model: HP Pavilion 13-x360.
CPU: Intel Core i5-5200U
BIOS version: Insyde F.39
GPU: Intel HD 5500
Motherboard: HP 2341(U3E1)
If you need more specs, tell me which and eventually how to get them in Windows(I used speccy to get those).

[kc1di]

Hello Irakus and Welcome to Linux Mint Forums,

I've had problems with hp laptop before so maybe we can figure it out.
First what graphics card is in your machine?

Did a little further searching and found this page which may be helpful. It's a bit dated but may still work.
Seems the hp UEFI only like to boot windows. any way give it a read :
https://laundryisrandom.wordpress.com/2 ... ndows-8-1/

[Irakus]

Like I wrote, Intel HD 5500. I tried all stuff from this page: https://community.linuxmint.com/tutorial/view/842

[kc1di]

Like I wrote, Intel HD 5500. I tried all stuff from this page: https://community.linuxmint.com/tutorial/view/842

The problem I think is HP's UEFI boot. (see web page in my last post. )

[Irakus]

Well, the solution on site you posted is to get to the grub. I can get to the Grub, but it freezes after Grub, so I think the problem lies somewhere else.
"I’ll assume from now and on that you have disabled secure boot and fast boot in Windows and that you have installed Linux on your hard drive. Install efibootmgr and grub." - the thing is, I cannot install Linux, since I cannot get to the Live mode/installation screen.

[michael louwe]

@ Irakus, .......

...

Try this link, ie use Rufus, ... https://h30434.www3.hp.com/t5/Notebook- ... -p/2552097

[Irakus]

I'm new on this forum and I didn't know that I had to use quote to quote things other than forum posts. My problem is different than in most of your links. People usually can't boot from USB at all. I can get to GRUB, but I have problems after that, so my notebook can start booting from USB.

[Moem]

I'm new on this forum and I didn't know that I had to use quote to quote things other than forum posts.

I've been here for a while and it's the first time I hear that. People sometimes use it when they're quoting articles found elsewhere, and that makes things nice and clear, but it's not a rule. No worries, you're doing fine.

[michael louwe]

@ Irakus, .......

...

.
Have a look at this link ... viewtopic.php?f=46&t=233654

[Irakus]

Notebook specs?

Please the following in a terminal and post the output to a code box.

Code: Select all

inxi -Fxz

I wrote it. Any ideas?

[jglen490]

Well, the solution on site you posted is to get to the grub. I can get to the Grub, but it freezes after Grub, so I think the problem lies somewhere else.
"I’ll assume from now and on that you have disabled secure boot and fast boot in Windows and that you have installed Linux on your hard drive. Install efibootmgr and grub." - the thing is, I cannot install Linux, since I cannot get to the Live mode/installation screen.

O.K., so you are having problems with the Live media (DVD/USB). My bad, I thought you had already installed it to your notebook.

You have gone into your BIOS and done all the settings for UEFI, Legacy, and Fast Boot. You shutdown your machine, then restarted with the Live media (DVD/USB) attached, and you never see the initial screen with the choices such as proceed to install, verify the media, or edit the boot string for the installer. Is that pretty much your situation?

[Irakus]

You have gone into your BIOS and done all the settings for UEFI, Legacy, and Fast Boot. You shutdown your machine, then restarted with the Live media (DVD/USB) attached, and you never see the initial screen with the choices such as proceed to install, verify the media, or edit the boot string for the installer. Is that pretty much your situation?

No, I actually get the GRUB screen with options such as proceeding to Live Mode, etc.
I tried new thing. I used WUBI to install Ubuntu on virtual disk, but during boot, I get black(purple) screen same as if I was running Live mode. Maybe this will help to understand my problem

[jglen490]

That's the screen where you can edit the boot string for getting to the Live media install screen. This sounds like a video card problem, but from what I can see the Intel HD 5500 should be well supported, so the only way around this display problem that I know is to add the "nomodeset" to the boot string and you can remove the "quiet" parameter to see all the responses from the boot process. There may be something else that can be edited into the boot string, but I sure don't know.

I hope someone else can figure out a solution for you.

[michael louwe]

@ Irakus, .......

...

.
Please refer to this link ... https://askubuntu.com/questions/765506/ ... t-acpi-off (hp bios update screwes stuff - black screen without acpi=off)

[Irakus]

Is there a method to check where my booting process stops?

[fabien85]

Is there a method to check where my booting process stops?

Yes. When you are editing the grub entry with 'e' to add 'acpi=off' as suggested by michael, also remove the 'quiet splash'.
To be perfectly clear, the procedure to edit the entry is given in the section "Solving freezes during the boot sequence" in https://www.linuxmint.com/rel_sylvia_cinnamon.php. This is most probably what you already did to add 'nomodeset' as you report.

[Irakus]

Okay, so what my problem was... bad typing. I was always writing "apic" instead of "acpi". Deleting quiet splash and adding acpi=off solved everything on both Mint and Ubuntu. Thank you all for help.