No irq handler for vector! Linux Mint 19 Cinnamon

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
Post Reply
artikov
Level 1
Level 1
Posts: 1
Joined: Tue Jul 31, 2018 4:28 am

No irq handler for vector! Linux Mint 19 Cinnamon

Post by artikov » Tue Jul 31, 2018 6:59 am

Hi everyone,

I installed Linux Mint 19 Cinnamon x64 about 2 weeks ago. It was working fine. But yesterday I installed the openTTD game, and then started the install graphics for it (abase), then I shut down the machine while it was still downloading the graphics. When I switched on the system back, it wrote "Do irq: 1.55 no irq handler for vector" and enters, after some time, to emergency mode. Where there is written the same warning: 1.55 no irq handler for vector.

I googled this issue but didn't find the proper solution.

I'm running an HP Pavilion q6 with an AMD A6-4400M APU.

Thanks in advance.

carum carvi
Level 4
Level 4
Posts: 278
Joined: Sun Apr 16, 2017 11:44 pm

Re: No irq handler for vector! Linux Mint 19 Cinnamon

Post by carum carvi » Wed Aug 08, 2018 5:59 am

artikov wrote:
Tue Jul 31, 2018 6:59 am

I installed the openTTD game, and then started the install graphics for it (abase), then I shut down the machine while it was still downloading the graphics. When I switched on the system back, it wrote "Do irq: 1.55 no irq handler for vector" and enters into emergency mode.
I have the same message at startup with the live dvd for different versions of LM19. It doesnt have to be a problem. Your pc could function just fine with that error message. You could check your "logfiles" and look at the submenu called "important". There is a list of important error messages.

But what you described is that you powered off your pc when you were still downloading the graphics. That could be troublesome, much more trouble some than this common error message about "no irq handler for vector". Did you see a "busybox"? Have you been able to reboot your system or is still hanging frozen at startup?

User avatar
catweazel
Level 17
Level 17
Posts: 7747
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: No irq handler for vector! Linux Mint 19 Cinnamon

Post by catweazel » Wed Aug 08, 2018 6:09 am

artikov wrote:
Tue Jul 31, 2018 6:59 am
I'm running an HP Pavilion q6 with an AMD A6-4400M APU.
Please post the output of this terminal command:

Code: Select all

inxi -Fxz
Enclose the results between [ⅽode] and [/ⅽode] code markers by selecting </> from the mini toolbar above the textbox where you type your reply.
¡uʍop ǝpısdn sı buıɥʇʎɹǝʌǝ os ɐıןɐɹʇsnɐ ɯoɹɟ ɯ,ı

Amit15
Level 1
Level 1
Posts: 1
Joined: Sat Aug 18, 2018 5:50 am

Re: No irq handler for vector! Linux Mint 19 Cinnamon

Post by Amit15 » Sat Aug 18, 2018 6:03 am

I have the same problem. When I boot the system after the grub menu I get "No irq handler for vector" displayed for few seconds. Also my laptop sometimes freezes randomly.
Also in Logs in the important tab this is the log
14:57:07 kernel: do_IRQ: 1.55 No irq handler for vector

Code: Select all

inxi -Fxz

System:    Host: Notebook Kernel: 4.15.0-32-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: Xfce 4.12.3 (Gtk 2.24.31) Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: Hewlett-Packard product: HP Pavilion g4 Notebook PC v: 0691130000204610000610100 serial: N/A
           Mobo: Hewlett-Packard model: 3564 v: 21.47 serial: N/A BIOS: Insyde v: F.6D date: 01/24/2014
Battery    BAT0: charge: 16.2 Wh 42.0% condition: 38.7/38.7 Wh (100%)
           model: Hewlett-Packard Primary status: Charging
CPU:       Dual core AMD A4-3330MX APU with Radeon HD Graphics (-MCP-) arch: Fusion rev.0 cache: 2048 KB
           flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 8783
           clock speeds: max: 2200 MHz 1: 1409 MHz 2: 1090 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Sumo [Radeon HD 6480G] bus-ID: 00:01.0
           Display Server: x11 (X.Org 1.19.6 ) drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1366x768@60.00hz
           OpenGL: renderer: AMD SUMO (DRM 2.50.0 / 4.15.0-32-generic, LLVM 6.0.0)
           version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel bus-ID: 00:14.2
           Card-2 Advanced Micro Devices [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
           driver: snd_hda_intel bus-ID: 00:01.1
           Sound: Advanced Linux Sound Architecture v: k4.15.0-32-generic
Network:   Card-1: Qualcomm Atheros AR9485 Wireless Network Adapter driver: ath9k bus-ID: 01:00.0
           IF: wlo1 state: up mac: <filter>
           Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 02:00.0
           IF: eno1 state: down mac: <filter>
           Card-3: Atheros usb-ID: 006-004
           IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 1000.2GB (3.5% used)
           ID-1: /dev/sda model: HGST_HTS541010A9 size: 1000.2GB
Partition: ID-1: / size: 624G used: 33G (6%) fs: ext4 dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 63.0C mobo: N/A gpu: 69.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 174 Uptime: 32 min Memory: 1545.4/7450.9MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 

logs:

Code: Select all

15:01:15 ntpd: error resolving pool 3.ubuntu.pool.ntp.org: Name or service not known (-2)
15:01:15 ntpd: error resolving pool 3.ubuntu.pool.ntp.org: Name or service not known (-2)
15:01:05 ntpd: error resolving pool 0.ubuntu.pool.ntp.org: Name or service not known (-2)
15:00:55 ntpd: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
14:59:50 ntpd: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
14:58:53 ntpd: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
14:58:43 ntpd: error resolving pool 0.ubuntu.pool.ntp.org: Name or service not known (-2)
14:57:44 bluetoothd: Failed to set mode: Blocked through rfkill (0x12)
14:57:43 pulseaudio: [pulseaudio] pid.c: Daemon already running.
14:57:37 bluetoothd: Failed to set mode: Blocked through rfkill (0x12)
14:57:36 kernel: usb 6-1: device not accepting address 3, error -62
14:57:36 lightdm: PAM adding faulty module: pam_kwallet5.so
14:57:32 ntpdate: the NTP socket is in use, exiting
14:57:32 ntpd: unable to create socket on wlo1 (5) for fe80::1530:4bb3:619b:cc8f%3#123
14:57:32 lightdm: PAM adding faulty module: pam_kwallet5.so
14:57:30 ntpd: error resolving pool 1.ubuntu.pool.ntp.org: Name or service not known (-2)
14:57:29 wpa_supplicant: dbus: Failed to construct signal
14:57:29 ntpd: error resolving pool 0.ubuntu.pool.ntp.org: Name or service not known (-2)
14:57:28 smartd: Warning via /usr/share/smartmontools/smartd-runner to root: failed (32-bit/8-bit exit status: 256/1)
14:57:25 kernel: usb 6-1: device descriptor read/64, error -110
14:57:07 kernel: do_IRQ: 1.55 No irq handler for vector

Post Reply

Return to “Installation & Boot”