[Solved] Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
Post Reply
glokhoff
Level 1
Level 1
Posts: 4
Joined: Sun Sep 16, 2018 1:30 pm

[Solved] Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by glokhoff » Sun Sep 16, 2018 1:59 pm

After several days of searching this forum for hints as to what could be the solution for my problem, I ran out of steam and hope one of the guru's can help me...

I have a clean install of Linux Mint 19 Xfce (tried Cinnamon as well, but the problem is the same) as a dualboot with Windows 7 on a Toshiba laptop L750 with a Samsung EVO 850 SSD and NVidia graphics card:

Code: Select all

gerard@gerard-SATELLITE-L750:~$ inxi -Fxz
System:    Host: gerard-SATELLITE-L750 Kernel: 4.15.0-34-generic x86_64
           bits: 64 gcc: 7.3.0
           Desktop: Xfce 4.12.3 (Gtk 2.24.31) Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: TOSHIBA product: SATELLITE L750 v: PSK2YE-0MC01MDU serial: N/A
           Mobo: Intel model: N/A serial: N/A
           BIOS: INSYDE v: 3.00 date: 12/30/2011
Battery    BAT1: charge: 14.6 Wh 100.0% condition: 14.6/55.0 Wh (27%)
           model: LGC PA3817U-1BRS status: Full
CPU:       Quad core Intel Core i7-2670QM (-MT-MCP-) 
           arch: Sandy Bridge rev.7 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17560
           clock speeds: max: 3100 MHz 1: 1124 MHz 2: 873 MHz 3: 873 MHz
           4: 985 MHz 5: 893 MHz 6: 952 MHz 7: 1256 MHz 8: 1117 MHz
Graphics:  Card: NVIDIA GF108M [GeForce GT 525M] bus-ID: 01:00.0
           Display Server: x11 (X.Org 1.19.6 ) driver: vesa
           Resolution: 1024x768@61.00hz
           OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
           version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio:     Card-1 Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 NVIDIA GF108 High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Sound: Advanced Linux Sound Architecture v: k4.15.0-34-generic
Network:   Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k bus-ID: 09:00.0
           IF: wlp9s0 state: up mac: <filter>
           Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
           driver: atl1c v: 1.0.1.1-NAPI port: 2000 bus-ID: 0a:00.0
           IF: enp10s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 250.1GB (3.4% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 65G used: 6.3G (11%) fs: ext4 dev: /dev/sda5
           ID-2: swap-1 size: 2.00GB used: 0.00GB (0%)
           fs: swap dev: /dev/sda6
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 55.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 218 Uptime: 36 min Memory: 852.4/5942.6MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56 
The linux system works, but takes a long time to boot:

Code: Select all

gerard@gerard-SATELLITE-L750:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.15.0-34-generic (buildd@lgw01-amd64-047) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #37-Ubuntu SMP Mon Aug 27 15:21:48 UTC 2018 (Ubuntu 4.15.0-34.37-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=745fb55a-7f70-4b8e-aa62-a385f413726b ro raid=noautodetect profile
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cf7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: TOSHIBA SATELLITE L750/Base Board Product Name, BIOS 3.00 12/30/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1cf800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0AF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 180000000 mask FC0000000 write-back
[    0.000000]   7 base 1C0000000 mask FF0000000 write-back
[    0.000000]   8 base 1CF800000 mask FFF800000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x10ed3f000, 0x10ed3ffff] PGTABLE
[    0.000000] BRK [0x10ed40000, 0x10ed40fff] PGTABLE
[    0.000000] BRK [0x10ed41000, 0x10ed41fff] PGTABLE
[    0.000000] BRK [0x10ed42000, 0x10ed42fff] PGTABLE
[    0.000000] BRK [0x10ed43000, 0x10ed43fff] PGTABLE
[    0.000000] BRK [0x10ed44000, 0x10ed44fff] PGTABLE
[    0.000000] BRK [0x10ed45000, 0x10ed45fff] PGTABLE
[    0.000000] BRK [0x10ed46000, 0x10ed46fff] PGTABLE
[    0.000000] BRK [0x10ed47000, 0x10ed47fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31021000-0x34807fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSQCI)
[    0.000000] ACPI: XSDT 0x00000000AF7FE120 000084 (v01 TOSQCI TOSQCI00 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AF7FC000 0000F4 (v04 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000AF7EB000 00D313 (v01 TOSQCI TOSQCI00 00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000AF76D000 000040
[    0.000000] ACPI: FACS 0x00000000AF76D000 000040
[    0.000000] ACPI: ASF! 0x00000000AF7FD000 0000A5 (v32 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 0x00000000AF7FB000 000038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000AF7FA000 00008C (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000AF7F9000 00003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x00000000AF7EA000 000176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 0x00000000AF7E9000 000224 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000AF7E7000 001068 (v01 INSYDE INSYDE   00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 0x00000000AF7E5000 000028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 0x00000000AF7E2000 000034 (v07 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000AF7E1000 0009D1 (v01 PmRef  Cpu0Ist  00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 0x00000000AF7E0000 000996 (v01 PmRef  CpuPm    00003000 INTL 20100121)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cf7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1cf7d3000-0x1cf7fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001cf7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000af63efff]
[    0.000000]   node   0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001cf7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cf7fffff]
[    0.000000] On node 0 totalpages: 1568220
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11161 pages used for memmap
[    0.000000]   DMA32 zone: 714304 pages, LIFO batch:31
[    0.000000]   Normal zone: 13280 pages used for memmap
[    0.000000]   Normal zone: 849920 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1543694
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=745fb55a-7f70-4b8e-aa62-a385f413726b ro raid=noautodetect profile
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6021640K/6272880K available (12300K kernel code, 2471K rwdata, 4244K rodata, 2408K init, 2416K bss, 251240K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39147 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2195.006 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.01 BogoMIPS (lpj=8780024)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.028036] Security Framework initialized
[    0.028119] Yama: becoming mindful.
[    0.028224] AppArmor: AppArmor initialized
[    0.029505] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030233] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.030355] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.030464] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.030808] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.030896] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.030990] mce: CPU supports 9 MCE banks
[    0.031091] process: using mwait in idle threads
[    0.031178] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.031263] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.031353] Spectre V2 : Mitigation: Full generic retpoline
[    0.031440] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.031555] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.031646] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.031875] Freeing SMP alternatives memory: 36K
[    0.036076] TSC deadline timer enabled
[    0.036080] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.036279] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.036426] ... version:                3
[    0.036508] ... bit width:              48
[    0.036591] ... generic registers:      4
[    0.036674] ... value mask:             0000ffffffffffff
[    0.036760] ... max period:             00007fffffffffff
[    0.036847] ... fixed-purpose events:   3
[    0.036930] ... event mask:             000000070000000f
[    0.037055] Hierarchical SRCU implementation.
[    0.038349] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038458] smp: Bringing up secondary CPUs ...
[    0.038626] x86: Booting SMP configuration:
[    0.038710] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.054474] smp: Brought up 1 node, 8 CPUs
[    0.054474] smpboot: Max logical packages: 1
[    0.056004] smpboot: Total of 8 processors activated (35120.09 BogoMIPS)
[    0.060332] devtmpfs: initialized
[    0.060332] x86/mm: Memory block size: 128MB
[    0.060828] evm: security.selinux
[    0.060910] evm: security.SMACK64
[    0.060991] evm: security.SMACK64EXEC
[    0.061073] evm: security.SMACK64TRANSMUTE
[    0.061156] evm: security.SMACK64MMAP
[    0.061237] evm: security.apparmor
[    0.061318] evm: security.ima
[    0.061399] evm: security.capability
[    0.061497] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[    0.061497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.061497] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.061497] pinctrl core: initialized pinctrl subsystem
[    0.061497] RTC time: 19:05:59, date: 09/16/18
[    0.061497] NET: Registered protocol family 16
[    0.061497] audit: initializing netlink subsys (disabled)
[    0.061497] audit: type=2000 audit(1537124758.060:1): state=initialized audit_enabled=0 res=1
[    0.061497] cpuidle: using governor ladder
[    0.061497] cpuidle: using governor menu
[    0.061497] Simple Boot Flag at 0x44 set to 0x1
[    0.061497] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.061497] ACPI: bus type PCI registered
[    0.061497] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064048] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.064177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.064177] PCI: Using configuration type 1 for base access
[    0.064177] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.064425] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.064514] mtrr: probably your BIOS does not setup all CPUs.
[    0.064601] mtrr: corrected configuration.
[    0.065875] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065877] ACPI: Added _OSI(Module Device)
[    0.065877] ACPI: Added _OSI(Processor Device)
[    0.065877] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065877] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065877] ACPI: Added _OSI(Linux-Dell-Video)
[    0.065877] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.065877] ACPI: Executed 1 blocks of module-level executable AML code
[    0.076509] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.077502] ACPI: Dynamic OEM Table Load:
[    0.077595] ACPI: SSDT 0xFFFF958B07517800 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.078346] ACPI: Dynamic OEM Table Load:
[    0.078435] ACPI: SSDT 0xFFFF958B07763000 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.079010] ACPI: Dynamic OEM Table Load:
[    0.079099] ACPI: SSDT 0xFFFF958B07751C00 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.081710] ACPI: EC: EC started
[    0.081790] ACPI: EC: interrupt blocked
[    0.082157] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.082246] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.082359] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.082472] ACPI: Interpreter enabled
[    0.082579] ACPI: (supports S0 S3 S4 S5)
[    0.082662] ACPI: Using IOAPIC for interrupt routing
[    0.082781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.083199] ACPI: GPE 0x1C active on init
[    0.083297] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.085973] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[    0.092809] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.092904] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.093084] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.094002] PCI host bridge to bus 0000:00
[    0.094089] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.094181] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.094272] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.094386] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[    0.094499] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.094594] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.094711] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.094752] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.094880] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.094908] pci 0000:00:16.0: reg 0x10: [mem 0xc3404000-0xc340400f 64bit]
[    0.094988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.095092] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.095740] pci 0000:00:1a.0: reg 0x10: [mem 0xc340a000-0xc340a3ff]
[    0.097614] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.097720] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.097744] pci 0000:00:1b.0: reg 0x10: [mem 0xc3400000-0xc3403fff 64bit]
[    0.097824] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.097931] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.098021] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.098129] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.098218] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.098328] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.098417] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.098523] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.098611] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.098719] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.099351] pci 0000:00:1d.0: reg 0x10: [mem 0xc3409000-0xc34093ff]
[    0.101148] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.101254] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.101461] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.101481] pci 0000:00:1f.2: reg 0x10: [io  0x4060-0x4067]
[    0.101490] pci 0000:00:1f.2: reg 0x14: [io  0x40b4-0x40b7]
[    0.101499] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    0.101507] pci 0000:00:1f.2: reg 0x1c: [io  0x409c-0x409f]
[    0.101516] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    0.101525] pci 0000:00:1f.2: reg 0x24: [mem 0xc3408000-0xc34087ff]
[    0.101570] pci 0000:00:1f.2: PME# supported from D3hot
[    0.101667] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.101688] pci 0000:00:1f.3: reg 0x10: [mem 0xc3406000-0xc34060ff 64bit]
[    0.101710] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    0.101888] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030000
[    0.101903] pci 0000:01:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[    0.101912] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.101921] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.101927] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.101934] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.101941] pci 0000:01:00.0: enabling Extended Tags
[    0.102144] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.102158] pci 0000:01:00.1: reg 0x10: [mem 0xc3000000-0xc3003fff]
[    0.102190] pci 0000:01:00.1: enabling Extended Tags
[    0.112040] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.112133] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.112135] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc30fffff]
[    0.112139] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.112205] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.112389] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
[    0.112432] pci 0000:08:00.0: reg 0x10: [mem 0xc3300000-0xc3301fff 64bit]
[    0.112589] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.124047] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.124146] pci 0000:00:1c.1:   bridge window [mem 0xc3300000-0xc33fffff]
[    0.124236] pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
[    0.124281] pci 0000:09:00.0: reg 0x10: [mem 0xc3200000-0xc320ffff 64bit]
[    0.124441] pci 0000:09:00.0: supports D1
[    0.124443] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[    0.136046] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.136144] pci 0000:00:1c.5:   bridge window [mem 0xc3200000-0xc32fffff]
[    0.136286] pci 0000:0a:00.0: [1969:1083] type 00 class 0x020000
[    0.136431] pci 0000:0a:00.0: reg 0x10: [mem 0xc3100000-0xc313ffff 64bit]
[    0.136480] pci 0000:0a:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.136966] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148079] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[    0.148179] pci 0000:00:1c.6:   bridge window [io  0x2000-0x2fff]
[    0.148184] pci 0000:00:1c.6:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.148884] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.149070] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.149274] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149457] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.149640] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.149845] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.150048] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.150229] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.150781] ACPI: EC: interrupt unblocked
[    0.150867] ACPI: EC: event unblocked
[    0.150952] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.151062] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.151406] SCSI subsystem initialized
[    0.151503] libata version 3.00 loaded.
[    0.151503] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.151503] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.151503] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.151503] vgaarb: loaded
[    0.151503] ACPI: bus type USB registered
[    0.152018] usbcore: registered new interface driver usbfs
[    0.152110] usbcore: registered new interface driver hub
[    0.152218] usbcore: registered new device driver usb
[    0.152337] EDAC MC: Ver: 3.0.0
[    0.152337] PCI: Using ACPI for IRQ routing
[    0.159323] PCI: pci_cache_line_size set to 64 bytes
[    0.159382] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.159384] e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff]
[    0.159385] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.159386] e820: reserve RAM buffer [mem 0x1cf800000-0x1cfffffff]
[    0.159482] NetLabel: Initializing
[    0.159560] NetLabel:  domain hash size = 128
[    0.159639] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.159740] NetLabel:  unlabeled traffic allowed by default
[    0.160260] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.160351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.163463] clocksource: Switched to clocksource hpet
[    0.171888] VFS: Disk quotas dquot_6.6.0
[    0.171992] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.172197] AppArmor: AppArmor Filesystem Enabled
[    0.172313] pnp: PnP ACPI init
[    0.172625] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.172711] system 00:00: [io  0x1004-0x1013] has been reserved
[    0.172797] system 00:00: [io  0xffff] has been reserved
[    0.172883] system 00:00: [io  0xffff] has been reserved
[    0.172966] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.173052] system 00:00: [io  0x0458-0x047f] could not be reserved
[    0.173139] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.173224] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.173314] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.173348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.173407] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.173497] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.173539] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.173576] pnp 00:04: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
[    0.173775] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.173864] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.173951] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.174037] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.174125] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.174212] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.174300] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.174387] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.174475] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.174564] system 00:05: [mem 0xc3500000-0xc3500fff] has been reserved
[    0.174653] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174999] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.175087] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.175178] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.175313] pnp: PnP ACPI: found 7 devices
[    0.181863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.181981] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.182138] pci 0000:01:00.0: BAR 6: assigned [mem 0xc3080000-0xc30fffff pref]
[    0.182248] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.182332] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.182419] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc30fffff]
[    0.182508] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.182620] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.182712] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.182798] pci 0000:00:1c.1:   bridge window [mem 0xc3300000-0xc33fffff]
[    0.182892] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.182978] pci 0000:00:1c.5:   bridge window [mem 0xc3200000-0xc32fffff]
[    0.183073] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[    0.183157] pci 0000:00:1c.6:   bridge window [io  0x2000-0x2fff]
[    0.183245] pci 0000:00:1c.6:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.183340] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.183342] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.183343] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.183345] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[    0.183347] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.183348] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc30fffff]
[    0.183350] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.183352] pci_bus 0000:08: resource 1 [mem 0xc3300000-0xc33fffff]
[    0.183354] pci_bus 0000:09: resource 1 [mem 0xc3200000-0xc32fffff]
[    0.183356] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
[    0.183357] pci_bus 0000:0a: resource 1 [mem 0xc3100000-0xc31fffff]
[    0.183474] NET: Registered protocol family 2
[    0.183752] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.184000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.184220] TCP: Hash tables configured (established 65536 bind 65536)
[    0.184345] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184459] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184606] NET: Registered protocol family 1
[    0.224226] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.245383] pci 0000:0a:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.245509] PCI: CLS 64 bytes, default 64
[    0.245558] Unpacking initramfs...
[    1.238581] Freeing initrd memory: 57244K
[    1.238752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.238840] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.239219] Scanning for low memory corruption every 60 seconds
[    1.240099] Initialise system trusted keyrings
[    1.240190] Key type blacklist registered
[    1.240313] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.241645] zbud: loaded
[    1.242246] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.242471] fuse init (API version 7.26)
[    1.243981] Key type asymmetric registered
[    1.244088] Asymmetric key parser 'x509' registered
[    1.244212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.244358] io scheduler noop registered
[    1.244438] io scheduler deadline registered
[    1.244562] io scheduler cfq registered (default)
[    1.245461] intel_idle: MWAIT substates: 0x21120
[    1.245463] intel_idle: v0.4.1 model 0x2A
[    1.245782] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.245920] ACPI: AC Adapter [ACAD] (on-line)
[    1.246063] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.246184] ACPI: Power Button [PWRB]
[    1.246298] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.246437] ACPI: Lid Switch [LID]
[    1.246550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.246679] ACPI: Power Button [PWRF]
[    1.247399] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.249609] Linux agpgart interface v0.103
[    1.251841] loop: module loaded
[    1.252131] libphy: Fixed MDIO Bus: probed
[    1.252212] tun: Universal TUN/TAP device driver, 1.6
[    1.252348] PPP generic driver version 2.4.2
[    1.252486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.252575] ehci-pci: EHCI PCI platform driver
[    1.252790] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.252878] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.252999] ehci-pci 0000:00:1a.0: debug port 2
[    1.256975] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.256989] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc340a000
[    1.272017] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.272149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.272238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.272346] usb usb1: Product: EHCI Host Controller
[    1.272429] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.272515] usb usb1: SerialNumber: 0000:00:1a.0
[    1.272750] hub 1-0:1.0: USB hub found
[    1.272835] hub 1-0:1.0: 2 ports detected
[    1.273150] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.273238] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.273358] ehci-pci 0000:00:1d.0: debug port 2
[    1.277330] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.277341] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3409000
[    1.292024] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.292138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.292233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.292341] usb usb2: Product: EHCI Host Controller
[    1.292424] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.292510] usb usb2: SerialNumber: 0000:00:1d.0
[    1.292737] hub 2-0:1.0: USB hub found
[    1.292826] hub 2-0:1.0: 2 ports detected
[    1.293016] ehci-platform: EHCI generic platform driver
[    1.293109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.293195] ohci-pci: OHCI PCI platform driver
[    1.293285] ohci-platform: OHCI generic platform driver
[    1.293373] uhci_hcd: USB Universal Host Controller Interface driver
[    1.293545] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    1.293633] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[    1.293912] xhci_hcd 0000:08:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
[    1.294328] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.294417] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.294526] usb usb3: Product: xHCI Host Controller
[    1.294608] usb usb3: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[    1.294694] usb usb3: SerialNumber: 0000:08:00.0
[    1.294908] hub 3-0:1.0: USB hub found
[    1.294997] hub 3-0:1.0: 2 ports detected
[    1.295166] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    1.295251] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
[    1.295362] xhci_hcd 0000:08:00.0: Host supports USB 3.0  SuperSpeed
[    1.297335] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.297464] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.297552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.297660] usb usb4: Product: xHCI Host Controller
[    1.297742] usb usb4: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[    1.297829] usb usb4: SerialNumber: 0000:08:00.0
[    1.298037] hub 4-0:1.0: USB hub found
[    1.298125] hub 4-0:1.0: 2 ports detected
[    1.298334] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.306652] i8042: Detected active multiplexing controller, rev 1.1
[    1.311433] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.311519] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.311629] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.311732] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.311837] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.312117] mousedev: PS/2 mouse device common for all mice
[    1.312523] rtc_cmos 00:01: RTC can wake from S4
[    1.312616] rtc_cmos: probe of 00:01 failed with error -16
[    1.312715] i2c /dev entries driver
[    1.312839] device-mapper: uevent: version 1.0.3
[    1.313022] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.313139] intel_pstate: Intel P-state driver initializing
[    1.313833] ledtrig-cpu: registered to indicate activity on CPUs
[    1.314383] NET: Registered protocol family 10
[    1.318661] Segment Routing with IPv6
[    1.318756] NET: Registered protocol family 17
[    1.318895] Key type dns_resolver registered
[    1.319493] RAS: Correctable Errors collector initialized.
[    1.319629] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[    1.319803] microcode: Microcode Update Driver: v2.2.
[    1.319811] sched_clock: Marking stable (1319798323, 0)->(1315065429, 4732894)
[    1.320267] registered taskstats version 1
[    1.320352] Loading compiled-in X.509 certificates
[    1.322748] Loaded X.509 cert 'Build time autogenerated kernel key: 197c80222fd2638086c51a9b9e4961ca73d6ea07'
[    1.322879] zswap: loaded using pool lzo/zbud
[    1.325862] Key type big_key registered
[    1.325943] Key type trusted registered
[    1.327499] Key type encrypted registered
[    1.327581] AppArmor: AppArmor sha1 policy hashing enabled
[    1.327664] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.327751] ima: Allocated hash algorithm: sha1
[    1.327842] evm: HMAC attrs: 0x1
[    1.328270]   Magic number: 2:749:91
[    1.328414] hctosys: unable to open rtc device (rtc0)
[    1.328558] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.328641] EDD information not available.
[    1.360220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.608125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.628129] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.628242] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.664294] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.664431] ACPI: Battery Slot [BAT1] (battery present)
[    1.666554] Freeing unused kernel memory: 2408K
[    1.688119] Write protecting the kernel read-only data: 20480k
[    1.688780] Freeing unused kernel memory: 2008K
[    1.692718] Freeing unused kernel memory: 1900K
[    1.698820] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.698903] x86/mm: Checking user space page tables
[    1.704790] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.761873] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[    1.762037] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.764366] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.764462] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.764765] hub 1-1:1.0: USB hub found
[    1.764989] hub 1-1:1.0: 6 ports detected
[    1.774957] ahci 0000:00:1f.2: version 3.0
[    1.775168] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.784743] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.784837] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.785148] hub 2-1:1.0: USB hub found
[    1.785368] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[    1.785491] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    1.785618] hub 2-1:1.0: 6 ports detected
[    1.808725] scsi host0: ahci
[    1.808990] scsi host1: ahci
[    1.809264] scsi host2: ahci
[    1.809593] scsi host3: ahci
[    1.809804] scsi host4: ahci
[    1.810027] scsi host5: ahci
[    1.810182] ata1: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408100 irq 32
[    1.811598] ata2: DUMMY
[    1.811672] ata3: DUMMY
[    1.811745] ata4: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408280 irq 32
[    1.811852] ata5: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408300 irq 32
[    1.811959] ata6: DUMMY
[    1.814536] usb 3-1: New USB device found, idVendor=046d, idProduct=c534
[    1.814624] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.814712] usb 3-1: Product: USB Receiver
[    1.814790] usb 3-1: Manufacturer: Logitech
[    1.817964] atl1c 0000:0a:00.0: version 1.0.1.1-NAPI
[    1.824996] atl1c 0000:0a:00.0 enp10s0: renamed from eth0
[    1.827379] hidraw: raw HID events driver (C) Jiri Kosina
[    1.867492] usbcore: registered new interface driver usbhid
[    1.867580] usbhid: USB HID core driver
[    1.869471] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input10
[    1.928095] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:08:00.0-1/input0
[    1.928430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input11
[    1.988138] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:08:00.0-1/input1
[    2.052024] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    2.072022] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    2.126457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.128126] ata1.00: supports DRM functions and may not be fully accessible
[    2.128879] ata1.00: disabling queued TRIM support
[    2.128880] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    2.128967] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.130740] ata1.00: supports DRM functions and may not be fully accessible
[    2.131361] ata1.00: disabling queued TRIM support
[    2.132797] ata1.00: configured for UDMA/133
[    2.133128] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.133499] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.133517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.133733] sd 0:0:0:0: [sda] Write Protect is off
[    2.133813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.133825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.134488]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.135594] sd 0:0:0:0: [sda] supports TCG Opal
[    2.135674] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.189072] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b1d6
[    2.189180] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.189281] usb 1-1.4: Product: CNF9055
[    2.189353] usb 1-1.4: Manufacturer: Sonix Technology Co., Ltd.
[    2.193475] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    2.193556] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.193657] usb 2-1.5: Product: USB2.0-CRW
[    2.193729] usb 2-1.5: Manufacturer: Generic
[    2.193802] usb 2-1.5: SerialNumber: 20090516388200000
[    2.202902] usbcore: registered new interface driver usb-storage
[    2.204245] usbcore: registered new interface driver uas
[    2.205475] ums-realtek 2-1.5:1.0: USB Mass Storage device detected
[    2.224445] scsi host6: usb-storage 2-1.5:1.0
[    2.224592] usbcore: registered new interface driver ums-realtek
[    2.268027] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.268136] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.272129] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.303405] random: fast init done
[    2.303686] usb 2-1.5: USB disconnect, device number 3
[    2.303969] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.304088] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.304181] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.380940] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[    2.381028] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.447138] ata4: SATA link down (SStatus 0 SControl 300)
[    2.595957] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[    2.680924] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[    2.734497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[    2.763845] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.768955] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO02, max UDMA/100
[    2.771846] ata5.00: configured for UDMA/100
[    2.777401] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TO02 PQ: 0 ANSI: 5
[    2.848988] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.849114] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.849426] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.849504] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.292410] clocksource: Switched to clocksource tsc
[  393.586151] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[  545.362365] ip_tables: (C) 2000-2006 Netfilter Core Team
[  545.368238] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  545.388232] systemd[1]: Detected architecture x86-64.
[  545.390879] systemd[1]: Set hostname to <gerard-SATELLITE-L750>.
[  545.465694] systemd[1]: Reached target Remote File Systems.
[  545.466332] systemd[1]: Created slice User and Session Slice.
[  545.466773] systemd[1]: Reached target User and Group Name Lookups.
[  545.467241] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  545.467705] systemd[1]: Reached target System Time Synchronized.
[  545.468301] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  545.468883] systemd[1]: Created slice System Slice.
[  545.483436] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[  545.494262] lp: driver loaded but no devices found
[  545.497840] ppdev: user-space parallel port driver
[  545.556057] systemd-journald[392]: Received request to flush runtime journal from PID 1
[  545.641485] audit: type=1400 audit(1537125303.636:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=505 comm="apparmor_parser"
[  545.641591] audit: type=1400 audit(1537125303.636:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=508 comm="apparmor_parser"
[  545.641898] audit: type=1400 audit(1537125303.636:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=504 comm="apparmor_parser"
[  545.641902] audit: type=1400 audit(1537125303.636:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=504 comm="apparmor_parser"
[  545.641905] audit: type=1400 audit(1537125303.636:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=504 comm="apparmor_parser"
[  545.642072] audit: type=1400 audit(1537125303.636:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=509 comm="apparmor_parser"
[  545.642661] audit: type=1400 audit(1537125303.636:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=506 comm="apparmor_parser"
[  545.642665] audit: type=1400 audit(1537125303.636:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=506 comm="apparmor_parser"
[  545.643219] audit: type=1400 audit(1537125303.636:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=511 comm="apparmor_parser"
[  545.644763] audit: type=1400 audit(1537125303.640:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=512 comm="apparmor_parser"
[  545.986061] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[  545.986408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  546.020713] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[  546.020721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  546.020725] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[  546.020730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  546.020732] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[  546.020737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  546.020738] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[  546.020743] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  546.020744] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  546.020747] lpc_ich 0000:00:1f.0: No MFD cells added
[  546.026331] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  546.031010] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  546.055390] media: Linux media interface: v0.10
[  546.063284] Linux video capture interface: v2.00
[  546.072200] Bluetooth: Core ver 2.22
[  546.072216] NET: Registered protocol family 31
[  546.072217] Bluetooth: HCI device and connection manager initialized
[  546.072220] Bluetooth: HCI socket layer initialized
[  546.072222] Bluetooth: L2CAP socket layer initialized
[  546.072228] Bluetooth: SCO socket layer initialized
[  546.080153] Adding 1952764k swap on /dev/sda6.  Priority:-2 extents:1 across:1952764k SSFS
[  546.080380] usbcore: registered new interface driver btusb
[  546.082027] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[  546.091553] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[  546.091556] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized!
[  546.091558] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[  546.091639] input: CNF9055: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[  546.091707] usbcore: registered new interface driver uvcvideo
[  546.091708] USB Video Class driver (1.1.1)
[  546.097735] snd_hda_intel 0000:01:00.1: Disabling MSI
[  546.097741] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[  546.110544] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[  546.111004] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[  546.111007] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  546.111009] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[  546.111011] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[  546.111012] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[  546.111015] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[  546.111017] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1a
[  546.112685] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[  546.118319] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[  546.118397] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[  546.118782] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[  546.118784] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[  546.118785] RAPL PMU: hw unit of domain package 2^-16 Joules
[  546.118786] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[  546.121661] ath: phy0: ASPM enabled: 0x42
[  546.121664] ath: EEPROM regdomain: 0x65
[  546.121664] ath: EEPROM indicates we should expect a direct regpair map
[  546.121665] ath: Country alpha2 being used: 00
[  546.121666] ath: Regpair used: 0x65
[  546.138354] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  546.138982] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa38981480000, irq=17
[  546.143159] AVX version of gcm_enc/dec engaged.
[  546.143160] AES CTR mode by8 optimization enabled
[  546.274307] intel_rapl: Found RAPL domain package
[  546.274309] intel_rapl: Found RAPL domain core
[  546.274314] intel_rapl: RAPL package 0 domain package locked by BIOS
[  546.302019] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0
[  546.398583] usbcore: registered new interface driver ath3k
[  546.517551] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
[  546.518440] atl1c 0000:0a:00.0: atl1c: enp10s0 NIC Link is Up<100 Mbps Full Duplex>
[  546.528477] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[  546.534730] usb 1-1.6: USB disconnect, device number 4
[  546.543681] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[  546.604662] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[  547.012052] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[  547.121141] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[  547.121144] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  547.148514] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  547.148515] Bluetooth: BNEP filters: protocol multicast
[  547.148519] Bluetooth: BNEP socket layer initialized
[  547.344695] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[  547.344792] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[  547.344856] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[  547.344916] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[  569.452556] Bluetooth: RFCOMM TTY layer initialized
[  569.452563] Bluetooth: RFCOMM socket layer initialized
[  569.452570] Bluetooth: RFCOMM ver 1.11
[  571.655502] random: crng init done
[  571.655513] random: 7 urandom warning(s) missed due to ratelimiting
and

Code: Select all

gerard@gerard-SATELLITE-L750:~$ systemd-analyze time
Startup finished in 9min 5.337s (kernel) + 2.435s (userspace) = 9min 7.772s
graphical.target reached after 1.176s in userspace
The following doesn't give me a clue what process is causing this, is it ?

Code: Select all

gerard@gerard-SATELLITE-L750:~$ systemd-analyze blame
           786ms apt-daily.service
           600ms dev-sda5.device
           531ms upower.service
           510ms apt-daily-upgrade.service
[rest removed to shorten the post]

I have removed the btrfs tools and progs as suggested in one of the posts, am running the nouveau display driver 1:1.0.15-2, and tried several other suggestions ((e.g. using different clocksource) from the forum.

I hope the report that the Samsung SSD drive is a complete disaster with Linux Mint is not true (anymore ?).

Suggestions on how to get this system to boot faster are highly appreciated ! Thanks in advance for taking the time to read through this...

Gerard
Last edited by glokhoff on Sun Sep 23, 2018 2:13 pm, edited 2 times in total.

User avatar
catweazel
Level 17
Level 17
Posts: 7748
Joined: Fri Oct 12, 2012 9:44 pm
Location: Australian Antarctic Territory

Re: Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by catweazel » Mon Sep 17, 2018 2:17 am

glokhoff wrote:
Sun Sep 16, 2018 1:59 pm
I hope the report that the Samsung SSD drive is a complete disaster with Linux Mint is not true (anymore ?).
It's absolutely false and always has been.
glokhoff wrote:

Code: Select all

[  393.586151] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[  545.362365] ip_tables: (C) 2000-2006 Netfilter Core Team
Your SSD is probably on its last legs. Install smartmontools and check that device.
¡uʍop ǝpısdn sı buıɥʇʎɹǝʌǝ os ɐıןɐɹʇsnɐ ɯoɹɟ ɯ,ı

glokhoff
Level 1
Level 1
Posts: 4
Joined: Sun Sep 16, 2018 1:30 pm

Re: Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by glokhoff » Mon Sep 17, 2018 2:49 am

Thanks for the quick response !

I installed the SSD with the intention to make the PC dual boot. It has had the long boot time since the start, with Linux Mint Cinnamon 18.3. So i doubt the SSD will be malfunctioning, as that would mean it was faulty from the start. Hoping the problem would be solved with Mint 19 I decided to give that a try.

This is the output of the short SMART self-test:

Code: Select all

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 850 EVO 250GB
Serial Number:    S2R6NX0J253889D
LU WWN Device Id: 5 002538 d41b9eaaa
Firmware Version: EMT02B6Q
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Sep 17 08:38:30 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 133) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   099   099   000    -    3955
 12 Power_Cycle_Count       -O--CK   098   098   000    -    1489
177 Wear_Leveling_Count     PO--C-   099   099   000    -    11
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
181 Program_Fail_Cnt_Total  -O--CK   100   100   010    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   010    -    0
183 Runtime_Bad_Block       PO--C-   100   099   010    -    0
187 Uncorrectable_Error_Cnt -O--CK   100   100   000    -    0
190 Airflow_Temperature_Cel -O--CK   067   053   000    -    33
195 ECC_Error_Rate          -O-RC-   200   200   000    -    0
199 CRC_Error_Count         -OSRCK   100   100   000    -    0
235 POR_Recovery_Count      -O--C-   099   099   000    -    82
241 Total_LBAs_Written      -O--CK   099   099   000    -    7773962756
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1           SL  VS      16  Device vendor specific log
0xa5           SL  VS      16  Device vendor specific log
0xce           SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3955         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    25 Celsius
Power Cycle Min/Max Temperature:     25/30 Celsius
Lifetime    Min/Max Temperature:     18/47 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    128 (99)

Index    Estimated Time   Temperature Celsius
 100    2018-09-16 11:20     ?  -
 101    2018-09-16 11:30    29  **********
 102    2018-09-16 11:40    31  ************
 103    2018-09-16 11:50    32  *************
 104    2018-09-16 12:00    32  *************
 105    2018-09-16 12:10    32  *************
 106    2018-09-16 12:20    33  **************
 107    2018-09-16 12:30    33  **************
 108    2018-09-16 12:40    34  ***************
 109    2018-09-16 12:50    29  **********
 110    2018-09-16 13:00    29  **********
 111    2018-09-16 13:10     ?  -
 112    2018-09-16 13:20     ?  -
 113    2018-09-16 13:30    29  **********
 114    2018-09-16 13:40    27  ********
 ...    ..(  3 skipped).    ..  ********
 118    2018-09-16 14:20    27  ********
 119    2018-09-16 14:30    26  *******
 ...    ..(  2 skipped).    ..  *******
 122    2018-09-16 15:00    26  *******
 123    2018-09-16 15:10    27  ********
 124    2018-09-16 15:20    31  ************
 125    2018-09-16 15:30    32  *************
 126    2018-09-16 15:40    33  **************
 127    2018-09-16 15:50    34  ***************
   0    2018-09-16 16:00    34  ***************
   1    2018-09-16 16:10    34  ***************
   2    2018-09-16 16:20     ?  -
   3    2018-09-16 16:30    25  ******
   4    2018-09-16 16:40    26  *******
   5    2018-09-16 16:50    28  *********
   6    2018-09-16 17:00    28  *********
   7    2018-09-16 17:10    29  **********
   8    2018-09-16 17:20    28  *********
   9    2018-09-16 17:30    28  *********
  10    2018-09-16 17:40     ?  -
  11    2018-09-16 17:50    29  **********
  12    2018-09-16 18:00    29  **********
  13    2018-09-16 18:10    31  ************
  14    2018-09-16 18:20     ?  -
  15    2018-09-16 18:30    29  **********
  16    2018-09-16 18:40    31  ************
  17    2018-09-16 18:50    33  **************
  18    2018-09-16 19:00    33  **************
  19    2018-09-16 19:10    34  ***************
 ...    ..(  4 skipped).    ..  ***************
  24    2018-09-16 20:00    34  ***************
  25    2018-09-16 20:10     ?  -
  26    2018-09-16 20:20    31  ************
  27    2018-09-16 20:30    33  **************
  28    2018-09-16 20:40    34  ***************
  29    2018-09-16 20:50    34  ***************
  30    2018-09-16 21:00    34  ***************
  31    2018-09-16 21:10    33  **************
 ...    ..(  4 skipped).    ..  **************
  36    2018-09-16 22:00    33  **************
  37    2018-09-16 22:10    31  ************
  38    2018-09-16 22:20    33  **************
 ...    ..(  8 skipped).    ..  **************
  47    2018-09-16 23:50    33  **************
  48    2018-09-17 00:00    32  *************
 ...    ..(  8 skipped).    ..  *************
  57    2018-09-17 01:30    32  *************
  58    2018-09-17 01:40     ?  -
  59    2018-09-17 01:50    29  **********
  60    2018-09-17 02:00     ?  -
  61    2018-09-17 02:10     ?  -
  62    2018-09-17 02:20    27  ********
  63    2018-09-17 02:30    27  ********
  64    2018-09-17 02:40    26  *******
  65    2018-09-17 02:50    27  ********
  66    2018-09-17 03:00    27  ********
  67    2018-09-17 03:10    27  ********
  68    2018-09-17 03:20    26  *******
  69    2018-09-17 03:30    28  *********
  70    2018-09-17 03:40    27  ********
  71    2018-09-17 03:50    27  ********
  72    2018-09-17 04:00    27  ********
  73    2018-09-17 04:10    26  *******
  74    2018-09-17 04:20     ?  -
  75    2018-09-17 04:30    25  ******
  76    2018-09-17 04:40    27  ********
  77    2018-09-17 04:50    27  ********
  78    2018-09-17 05:00    29  **********
  79    2018-09-17 05:10    30  ***********
  80    2018-09-17 05:20    30  ***********
  81    2018-09-17 05:30    30  ***********
  82    2018-09-17 05:40    29  **********
 ...    ..( 13 skipped).    ..  **********
  96    2018-09-17 08:00    29  **********
  97    2018-09-17 08:10    30  ***********
  98    2018-09-17 08:20     ?  -
  99    2018-09-17 08:30    25  ******

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2          598  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            6  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC

glokhoff
Level 1
Level 1
Posts: 4
Joined: Sun Sep 16, 2018 1:30 pm

Re: Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by glokhoff » Sun Sep 23, 2018 11:54 am

By the way, the boot time is still extremely long - and I keep on hoping there is someone who can come with a solution... :?

Laurent85
Level 15
Level 15
Posts: 5727
Joined: Tue May 26, 2015 10:11 am

Re: Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by Laurent85 » Sun Sep 23, 2018 12:50 pm

You should update the bios version to the latest release available, see Toshiba support.
Image

glokhoff
Level 1
Level 1
Posts: 4
Joined: Sun Sep 16, 2018 1:30 pm

Re: Long boot Mint 19 on Toshiba L750 with Samsung SSD and NVidia Graphics

Post by glokhoff » Sun Sep 23, 2018 2:11 pm

Thanks a lot ! This solved it... I hadn't thought of doing this as the system didn't seem ' broken'. But the result is spectacular:

Code: Select all

gerard@gerard-SATELLITE-L750:~$ inxi -Fxz
System:    Host: gerard-SATELLITE-L750 Kernel: 4.15.0-34-generic x86_64
           bits: 64 gcc: 7.3.0
           Desktop: Xfce 4.12.3 (Gtk 2.24.31) Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: TOSHIBA product: SATELLITE L750 v: PSK2YE-0MC01MDU serial: N/A
           Mobo: Intel model: N/A serial: N/A
           BIOS: INSYDE v: 3.60 date: 06/26/2012
Battery    BAT1: charge: 1.2 Wh 102.7% condition: 1.2/4.4 Wh (27%)
           model: LGC PA3817U-1BRS status: Full
CPU:       Quad core Intel Core i7-2670QM (-MT-MCP-) 
           arch: Sandy Bridge rev.7 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17558
           clock speeds: max: 3100 MHz 1: 801 MHz 2: 840 MHz 3: 930 MHz
           4: 1186 MHz 5: 973 MHz 6: 876 MHz 7: 894 MHz 8: 1497 MHz
Graphics:  Card: NVIDIA GF108M [GeForce GT 525M] bus-ID: 01:00.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: nouveau (unloaded: modesetting,fbdev,vesa)
           Resolution: 1366x768@60.00hz
           OpenGL: renderer: NVC1 version: 4.3 Mesa 18.0.5 Direct Render: Yes
Audio:     Card-1 Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 NVIDIA GF108 High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-3 Cambridge Silicon Radio driver: USB Audio usb-ID: 001-003
           Sound: Advanced Linux Sound Architecture v: k4.15.0-34-generic
Network:   Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
           driver: ath9k bus-ID: 09:00.0
           IF: wlp9s0 state: up mac: <filter>
           Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
           driver: atl1c v: 1.0.1.1-NAPI port: 2000 bus-ID: 0a:00.0
           IF: enp10s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 250.1GB (3.5% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 65G used: 6.5G (11%) fs: ext4 dev: /dev/sda5
           ID-2: swap-1 size: 2.00GB used: 0.00GB (0%)
           fs: swap dev: /dev/sda6
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 64.0C mobo: N/A gpu: 64.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 232 Uptime: 2 min Memory: 695.9/5942.6MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56
and

Code: Select all

[    0.175985] NET: Registered protocol family 2
[    0.176194] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.176338] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.176466] TCP: Hash tables configured (established 65536 bind 65536)
[    0.176509] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.176539] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.176601] NET: Registered protocol family 1
[    0.216222] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.236091] pci 0000:0a:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.236104] PCI: CLS 64 bytes, default 64
[    0.236146] Unpacking initramfs...
[    1.229042] Freeing initrd memory: 57244K
[    1.229093] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.229099] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.229363] Scanning for low memory corruption every 60 seconds
[    1.230149] Initialise system trusted keyrings
[    1.230160] Key type blacklist registered
[    1.230200] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.231451] zbud: loaded
[    1.231977] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.232136] fuse init (API version 7.26)
[    1.233606] Key type asymmetric registered
[    1.233610] Asymmetric key parser 'x509' registered
[    1.233641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.233686] io scheduler noop registered
[    1.233689] io scheduler deadline registered
[    1.233735] io scheduler cfq registered (default)
[    1.234550] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.234553] vesafb: scrolling: redraw
[    1.234557] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.234569] vesafb: framebuffer at 0xc1000000, mapped to 0x        (ptrval), using 1216k, total 1216k
[    1.252686] Console: switching to colour frame buffer device 80x30
[    1.271235] fb0: VESA VGA frame buffer device
[    1.271636] intel_idle: MWAIT substates: 0x21120
[    1.271637] intel_idle: v0.4.1 model 0x2A
[    1.271964] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.272118] ACPI: AC Adapter [ACAD] (on-line)
[    1.272557] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.273287] ACPI: Power Button [PWRB]
[    1.284681] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.308219] ACPI: Lid Switch [LID]
[    1.319650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.342676] ACPI: Power Button [PWRF]
[    1.355102] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.369228] Linux agpgart interface v0.103
[    1.383202] loop: module loaded
[    1.394704] libphy: Fixed MDIO Bus: probed
[    1.405977] tun: Universal TUN/TAP device driver, 1.6
[    1.417360] PPP generic driver version 2.4.2
[    1.428770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.440438] ehci-pci: EHCI PCI platform driver
[    1.452007] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.463304] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.486046] ehci-pci 0000:00:1a.0: debug port 2
[    1.501688] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.501703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc340a000
[    1.528048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.539682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.551528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.574611] usb usb1: Product: EHCI Host Controller
[    1.586140] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.597744] usb usb1: SerialNumber: 0000:00:1a.0
[    1.609404] hub 1-0:1.0: USB hub found
[    1.620620] hub 1-0:1.0: 2 ports detected
[    1.631688] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.642688] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.663941] ehci-pci 0000:00:1d.0: debug port 2
[    1.678572] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.678584] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3409000
[    1.704044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.714323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.724835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.745212] usb usb2: Product: EHCI Host Controller
[    1.755642] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[    1.766322] usb usb2: SerialNumber: 0000:00:1d.0
[    1.772191] ACPI: Battery Slot [BAT1] (battery present)
[    1.787557] hub 2-0:1.0: USB hub found
[    1.797934] hub 2-0:1.0: 2 ports detected
[    1.808175] ehci-platform: EHCI generic platform driver
[    1.818475] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.828906] ohci-pci: OHCI PCI platform driver
[    1.839057] ohci-platform: OHCI generic platform driver
[    1.849249] uhci_hcd: USB Universal Host Controller Interface driver
[    1.859811] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    1.870359] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[    1.891160] xhci_hcd 0000:08:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
[    1.912557] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.923558] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.945234] usb usb3: Product: xHCI Host Controller
[    1.956467] usb usb3: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[    1.967856] usb usb3: SerialNumber: 0000:08:00.0
[    1.976030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.990616] hub 3-0:1.0: USB hub found
[    2.001808] hub 3-0:1.0: 2 ports detected
[    2.013061] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    2.024469] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
[    2.046860] xhci_hcd 0000:08:00.0: Host supports USB 3.0  SuperSpeed
[    2.058344] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.081391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.093402] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.116997] usb usb4: Product: xHCI Host Controller
[    2.129170] usb usb4: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[    2.132474] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.132476] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.132879] hub 1-1:1.0: USB hub found
[    2.133095] hub 1-1:1.0: 6 ports detected
[    2.144027] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.202682] usb usb4: SerialNumber: 0000:08:00.0
[    2.214911] hub 4-0:1.0: USB hub found
[    2.226764] hub 4-0:1.0: 2 ports detected
[    2.236038] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.236055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.273091] i8042: PNP: PS/2 Controller [PNP0303:PS2E,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.300471] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.305097] i8042: Detected active multiplexing controller, rev 1.1
[    2.310351] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.310356] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.310384] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.310406] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.310432] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.310622] mousedev: PS/2 mouse device common for all mice
[    2.310938] rtc_cmos 00:01: RTC can wake from S4
[    2.310951] rtc_cmos: probe of 00:01 failed with error -16
[    2.310968] i2c /dev entries driver
[    2.311013] device-mapper: uevent: version 1.0.3
[    2.311115] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.311120] intel_pstate: Intel P-state driver initializing
[    2.339714] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.352026] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    2.420020] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.467263] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.476175] ledtrig-cpu: registered to indicate activity on CPUs
[    2.476367] hub 2-1:1.0: USB hub found
[    2.476552] hub 2-1:1.0: 6 ports detected
[    2.504379] NET: Registered protocol family 10
[    2.517708] Segment Routing with IPv6
[    2.526544] NET: Registered protocol family 17
[    2.535120] Key type dns_resolver registered
[    2.544136] RAS: Correctable Errors collector initialized.
[    2.550407] usb 3-1: New USB device found, idVendor=046d, idProduct=c534
[    2.550418] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.550419] usb 3-1: Product: USB Receiver
[    2.550420] usb 3-1: Manufacturer: Logitech
[    2.580304] usb 1-1.1: New USB device found, idVendor=0a12, idProduct=1243
[    2.580306] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[    2.580307] usb 1-1.1: Product: Philips WeCall Speaker
[    2.580308] usb 1-1.1: SerialNumber: ABCDEF0123456789
[    2.626639] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[    2.635677] microcode: Microcode Update Driver: v2.2.
[    2.635685] sched_clock: Marking stable (2635671891, 0)->(2633992403, 1679488)
[    2.661916] registered taskstats version 1
[    2.664020] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.680885] Loading compiled-in X.509 certificates
[    2.692716] Loaded X.509 cert 'Build time autogenerated kernel key: 197c80222fd2638086c51a9b9e4961ca73d6ea07'
[    2.711512] zswap: loaded using pool lzo/zbud
[    2.723763] Key type big_key registered
[    2.732622] Key type trusted registered
[    2.742765] Key type encrypted registered
[    2.751180] AppArmor: AppArmor sha1 policy hashing enabled
[    2.759386] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.767851] ima: Allocated hash algorithm: sha1
[    2.772017] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    2.785083] evm: HMAC attrs: 0x1
[    2.794037]   Magic number: 2:207:1002
[    2.802667] i8042 aux 00:04: hash matches
[    2.808797] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b1d6
[    2.808799] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.808800] usb 1-1.4: Product: CNF9055
[    2.808801] usb 1-1.4: Manufacturer: Sonix Technology Co., Ltd.
[    2.856657] memory memory41: hash matches
[    2.865721] hctosys: unable to open rtc device (rtc0)
[    2.874518] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.883194] EDD information not available.
[    2.894062] Freeing unused kernel memory: 2408K
[    2.928018] Write protecting the kernel read-only data: 20480k
[    2.937241] Freeing unused kernel memory: 2008K
[    2.949375] Freeing unused kernel memory: 1900K
[    2.963252] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.971448] x86/mm: Checking user space page tables
[    2.985259] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.138178] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    3.146061] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.161629] usb 2-1.5: Product: USB2.0-CRW
[    3.169672] usb 2-1.5: Manufacturer: Generic
[    3.177613] usb 2-1.5: SerialNumber: 20090516388200000
[    3.194476] usbcore: registered new interface driver usb-storage
[    3.204349] usbcore: registered new interface driver uas
[    3.213799] ums-realtek 2-1.5:1.0: USB Mass Storage device detected
[    3.241042] scsi host0: usb-storage 2-1.5:1.0
[    3.249071] usbcore: registered new interface driver ums-realtek
[    3.260112] clocksource: Switched to clocksource tsc
[    3.482641] usb 2-1.5: USB disconnect, device number 3
[    3.491519] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[    3.500470] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.510044] hidraw: raw HID events driver (C) Jiri Kosina
[    3.521995] ahci 0000:00:1f.2: version 3.0
[    3.524246] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.543574] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[    3.560699] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    3.565355] atl1c 0000:0a:00.0: version 1.0.1.1-NAPI
[    3.579035] random: fast init done
[    3.593626] usbcore: registered new interface driver usbhid
[    3.593626] usbhid: USB HID core driver
[    3.593652] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.593661] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.593675] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.597504] atl1c 0000:0a:00.0 enp10s0: renamed from eth0
[    3.652932] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input10
[    3.676785] scsi host0: ahci
[    3.685876] scsi host1: ahci
[    3.694785] scsi host2: ahci
[    3.703374] scsi host3: ahci
[    3.711992] scsi host4: ahci
[    3.720555] scsi host5: ahci
[    3.728122] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:08:00.0-1/input0
[    3.728352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input11
[    3.762533] ata1: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408100 irq 32
[    3.779845] ata2: DUMMY
[    3.788253] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:08:00.0-1/input1
[    3.788355] input: Philips WeCall Speaker as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.3/0003:0A12:1243.0003/input/input12
[    3.792181] acpi device:30: registered as cooling_device8
[    3.792214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input13
[    3.848112] hid-generic 0003:0A12:1243.0003: input,hidraw2: USB HID v1.11 Device [Philips WeCall Speaker] on usb-0000:00:1a.0-1.1/input3
[    3.848242] input: Philips WeCall Speaker as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.4/0003:0A12:1243.0004/input/input14
[    3.888690] ata3: DUMMY
[    3.898790] ata4: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408280 irq 32
[    3.919209] ata5: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408300 irq 32
[    3.920155] hid-generic 0003:0A12:1243.0004: input,hidraw3: USB HID v1.11 Keyboard [Philips WeCall Speaker] on usb-0000:00:1a.0-1.1/input4
[    3.960935] ata6: DUMMY
[    3.993915] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    4.017396] ACPI: \_SB_.PCI0.PEG0.VGA_: failed to evaluate _DSM
[    4.029391] checking generic (c1000000 130000) vs hw (b0000000 10000000)
[    4.029392] checking generic (c1000000 130000) vs hw (c0000000 2000000)
[    4.029393] fb: switching to nouveaufb from VESA VGA
[    4.041137] Console: switching to colour dummy device 80x25
[    4.041370] nouveau 0000:01:00.0: NVIDIA GF108 (0c1600a1)
[    4.058802] nouveau 0000:01:00.0: bios: version 70.08.54.00.0b
[    4.059815] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    4.115285] [TTM] Zone  kernel: Available graphics memory: 3042618 kiB
[    4.115296] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.115299] [TTM] Initializing pool allocator
[    4.115303] [TTM] Initializing DMA pool allocator
[    4.115315] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    4.115317] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    4.115321] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    4.115324] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    4.115327] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[    4.115330] nouveau 0000:01:00.0: DRM: DCB outp 01: 02014300 00000000
[    4.115333] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021362 00020010
[    4.115335] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000340
[    4.115338] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001061
[    4.115340] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000147
[    4.115343] nouveau 0000:01:00.0: DRM: DCB conn 03: 00202346
[    4.115345] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[    4.115348] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000210
[    4.115350] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000211
[    4.115352] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000213
[    4.115355] nouveau 0000:01:00.0: DRM: DCB conn 08: 00020846
[    4.115357] nouveau 0000:01:00.0: DRM: DCB conn 09: 00000900
[    4.116145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.116148] [drm] Driver supports precise vblank timestamp query.
[    4.117044] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    4.186438] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x60000, bo         (ptrval)
[    4.187846] fbcon: nouveaufb (fb0) is primary device
[    4.286308] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.287880] ata1.00: supports DRM functions and may not be fully accessible
[    4.288477] ata1.00: disabling queued TRIM support
[    4.288478] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    4.288479] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    4.290169] ata1.00: supports DRM functions and may not be fully accessible
[    4.290711] ata1.00: disabling queued TRIM support
[    4.292152] ata1.00: configured for UDMA/133
[    4.292378] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    4.292638] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.292685] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    4.292694] sd 0:0:0:0: [sda] Write Protect is off
[    4.292696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.292708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.293272]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    4.294439] sd 0:0:0:0: [sda] supports TCG Opal
[    4.294441] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.315527] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[    4.401493] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[    4.449109] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[    4.606280] ata4: SATA link down (SStatus 0 SControl 300)
[    4.918296] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.927509] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO02, max UDMA/100
[    4.929935] ata5.00: configured for UDMA/100
[    4.931450] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TO02 PQ: 0 ANSI: 5
[    4.996982] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.996983] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.997124] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.997225] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    5.574308] Console: switching to colour frame buffer device 170x48
[    5.645935] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    5.660179] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    6.319318] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.441895] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.447772] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.468197] systemd[1]: Detected architecture x86-64.
[    6.472545] systemd[1]: Set hostname to <gerard-SATELLITE-L750>.
[    6.547097] systemd[1]: Created slice System Slice.
[    6.548138] systemd[1]: Listening on Journal Socket.
[    6.550580] systemd[1]: Mounting Kernel Debug File System...
[    6.552878] systemd[1]: Mounting Huge Pages File System...
[    6.554643] systemd[1]: Starting Uncomplicated firewall...
[    6.556175] systemd[1]: Listening on Journal Audit Socket.
[    6.558094] systemd[1]: Listening on udev Control Socket.
[    6.591001] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    6.595787] lp: driver loaded but no devices found
[    6.601263] ppdev: user-space parallel port driver
[    6.646243] systemd-journald[392]: Received request to flush runtime journal from PID 1
[    6.740301] audit: type=1400 audit(1537732710.736:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=512 comm="apparmor_parser"
[    6.740939] audit: type=1400 audit(1537732710.736:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=509 comm="apparmor_parser"
[    6.741219] audit: type=1400 audit(1537732710.736:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=508 comm="apparmor_parser"
[    6.741223] audit: type=1400 audit(1537732710.736:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=508 comm="apparmor_parser"
[    6.741226] audit: type=1400 audit(1537732710.736:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=508 comm="apparmor_parser"
[    6.741610] audit: type=1400 audit(1537732710.736:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=510 comm="apparmor_parser"
[    6.741614] audit: type=1400 audit(1537732710.736:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=510 comm="apparmor_parser"
[    6.742073] audit: type=1400 audit(1537732710.736:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=513 comm="apparmor_parser"
[    6.744031] audit: type=1400 audit(1537732710.740:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=515 comm="apparmor_parser"
[    6.744241] audit: type=1400 audit(1537732710.740:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=506 comm="apparmor_parser"
[    7.080451] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.084315] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[    7.092312] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
[    7.096593] input: Toshiba input device as /devices/virtual/input/input17
[    7.125448] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    7.125461] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.125472] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    7.125480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.125486] toshiba_acpi: Supported laptop features: hotkeys touchpad usb-sleep-charge
[    7.125489] ACPI Warning: 
[    7.125490]  cooling-method
[    7.125493] SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    7.125496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.125498] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    7.125503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.125504] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.125507] lpc_ich 0000:00:1f.0: No MFD cells added
[    7.144433] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.156458] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.181942] media: Linux media interface: v0.10
[    7.183325] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    7.183327] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    7.183328] RAPL PMU: hw unit of domain package 2^-16 Joules
[    7.183329] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    7.190686] Adding 1952764k swap on /dev/sda6.  Priority:-2 extents:1 across:1952764k SSFS
[    7.191224] Linux video capture interface: v2.00
[    7.209939] AVX version of gcm_enc/dec engaged.
[    7.209940] AES CTR mode by8 optimization enabled
[    7.221505] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.221512] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.222774] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[    7.240017] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[    7.240020] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized!
[    7.240023] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    7.240814] input: CNF9055: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
[    7.242302] usbcore: registered new interface driver uvcvideo
[    7.242303] USB Video Class driver (1.1.1)
[    7.272689] ath: phy0: ASPM enabled: 0x42
[    7.272692] ath: EEPROM regdomain: 0x65
[    7.272693] ath: EEPROM indicates we should expect a direct regpair map
[    7.272694] ath: Country alpha2 being used: 00
[    7.272695] ath: Regpair used: 0x65
[    7.276181] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[    7.276656] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    7.276659] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.276662] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[    7.276663] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    7.276665] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    7.276667] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    7.276669] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1a
[    7.277744] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    7.282907] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    7.283051] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    7.295324] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.296842] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffff97b581330000, irq=17
[    7.302395] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0
[    7.367534] intel_rapl: Found RAPL domain package
[    7.367536] intel_rapl: Found RAPL domain core
[    7.367540] intel_rapl: RAPL package 0 domain package locked by BIOS
[    7.369606] random: crng init done
[    7.369608] random: 7 urandom warning(s) missed due to ratelimiting
[    7.443528] usbcore: registered new interface driver snd-usb-audio
[    7.717331] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
[    7.718360] atl1c 0000:0a:00.0: atl1c: enp10s0 NIC Link is Up<100 Mbps Full Duplex>
[    7.724197] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    7.739432] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    7.829667] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[    8.452490] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
[    8.452563] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
[    8.452627] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
[    8.452688] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24
[    9.416136] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[    9.524851] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[    9.524854] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.549171] Bluetooth: Core ver 2.22
[    9.549190] NET: Registered protocol family 31
[    9.549191] Bluetooth: HCI device and connection manager initialized
[    9.549195] Bluetooth: HCI socket layer initialized
[    9.549197] Bluetooth: L2CAP socket layer initialized
[    9.549203] Bluetooth: SCO socket layer initialized
[    9.555587] usbcore: registered new interface driver btusb
[    9.810717] usbcore: registered new interface driver ath3k
[    9.962650] usb 1-1.6: USB disconnect, device number 5
[   10.440118] usb 1-1.6: new full-speed USB device number 6 using ehci-pci
[   10.549161] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[   10.549166] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   10.654761] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.654763] Bluetooth: BNEP filters: protocol multicast
[   10.654767] Bluetooth: BNEP socket layer initialized
[   16.542837] wlp9s0: authenticate with f8:32:e4:ac:0f:b8
[   16.556382] wlp9s0: send auth to f8:32:e4:ac:0f:b8 (try 1/3)
[   16.558681] wlp9s0: authenticated
[   16.560078] wlp9s0: associate with f8:32:e4:ac:0f:b8 (try 1/3)
[   16.563755] wlp9s0: RX AssocResp from f8:32:e4:ac:0f:b8 (capab=0x411 status=0 aid=5)
[   16.563907] wlp9s0: associated
[   16.592336] IPv6: ADDRCONF(NETDEV_CHANGE): wlp9s0: link becomes ready
[   18.658628] Bluetooth: RFCOMM TTY layer initialized
[   18.658635] Bluetooth: RFCOMM socket layer initialized
[   18.658640] Bluetooth: RFCOMM ver 1.11
Next challenge: see whether or not the NVidia driver works well...

Post Reply

Return to “Installation & Boot”