I have a clean install of Linux Mint 19 Xfce (tried Cinnamon as well, but the problem is the same) as a dualboot with Windows 7 on a Toshiba laptop L750 with a Samsung EVO 850 SSD and NVidia graphics card:
Code: Select all
gerard@gerard-SATELLITE-L750:~$ inxi -Fxz
System: Host: gerard-SATELLITE-L750 Kernel: 4.15.0-34-generic x86_64
bits: 64 gcc: 7.3.0
Desktop: Xfce 4.12.3 (Gtk 2.24.31) Distro: Linux Mint 19 Tara
Machine: Device: laptop System: TOSHIBA product: SATELLITE L750 v: PSK2YE-0MC01MDU serial: N/A
Mobo: Intel model: N/A serial: N/A
BIOS: INSYDE v: 3.00 date: 12/30/2011
Battery BAT1: charge: 14.6 Wh 100.0% condition: 14.6/55.0 Wh (27%)
model: LGC PA3817U-1BRS status: Full
CPU: Quad core Intel Core i7-2670QM (-MT-MCP-)
arch: Sandy Bridge rev.7 cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17560
clock speeds: max: 3100 MHz 1: 1124 MHz 2: 873 MHz 3: 873 MHz
4: 985 MHz 5: 893 MHz 6: 952 MHz 7: 1256 MHz 8: 1117 MHz
Graphics: Card: NVIDIA GF108M [GeForce GT 525M] bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.6 ) driver: vesa
Resolution: 1024x768@61.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio: Card-1 Intel 6 Series/C200 Series Family High Def. Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 NVIDIA GF108 High Def. Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1
Sound: Advanced Linux Sound Architecture v: k4.15.0-34-generic
Network: Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express)
driver: ath9k bus-ID: 09:00.0
IF: wlp9s0 state: up mac: <filter>
Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
driver: atl1c v: 1.0.1.1-NAPI port: 2000 bus-ID: 0a:00.0
IF: enp10s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 250.1GB (3.4% used)
ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 65G used: 6.3G (11%) fs: ext4 dev: /dev/sda5
ID-2: swap-1 size: 2.00GB used: 0.00GB (0%)
fs: swap dev: /dev/sda6
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 55.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 218 Uptime: 36 min Memory: 852.4/5942.6MB
Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.191) inxi: 2.3.56
Code: Select all
gerard@gerard-SATELLITE-L750:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[ 0.000000] Linux version 4.15.0-34-generic (buildd@lgw01-amd64-047) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #37-Ubuntu SMP Mon Aug 27 15:21:48 UTC 2018 (Ubuntu 4.15.0-34.37-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=745fb55a-7f70-4b8e-aa62-a385f413726b ro raid=noautodetect profile
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cf7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA SATELLITE L750/Base Board Product Name, BIOS 3.00 12/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1cf800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1C0000000 mask FF0000000 write-back
[ 0.000000] 8 base 1CF800000 mask FFF800000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] BRK [0x10ed3f000, 0x10ed3ffff] PGTABLE
[ 0.000000] BRK [0x10ed40000, 0x10ed40fff] PGTABLE
[ 0.000000] BRK [0x10ed41000, 0x10ed41fff] PGTABLE
[ 0.000000] BRK [0x10ed42000, 0x10ed42fff] PGTABLE
[ 0.000000] BRK [0x10ed43000, 0x10ed43fff] PGTABLE
[ 0.000000] BRK [0x10ed44000, 0x10ed44fff] PGTABLE
[ 0.000000] BRK [0x10ed45000, 0x10ed45fff] PGTABLE
[ 0.000000] BRK [0x10ed46000, 0x10ed46fff] PGTABLE
[ 0.000000] BRK [0x10ed47000, 0x10ed47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31021000-0x34807fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 0x00000000AF7FE120 000084 (v01 TOSQCI TOSQCI00 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000AF7FC000 0000F4 (v04 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x00000000AF7EB000 00D313 (v01 TOSQCI TOSQCI00 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x00000000AF76D000 000040
[ 0.000000] ACPI: FACS 0x00000000AF76D000 000040
[ 0.000000] ACPI: ASF! 0x00000000AF7FD000 0000A5 (v32 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 0x00000000AF7FB000 000038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0x00000000AF7FA000 00008C (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000AF7F9000 00003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0x00000000AF7EA000 000176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 0x00000000AF7E9000 000224 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AF7E7000 001068 (v01 INSYDE INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 0x00000000AF7E5000 000028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 0x00000000AF7E2000 000034 (v07 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AF7E1000 0009D1 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 0x00000000AF7E0000 000996 (v01 PmRef CpuPm 00003000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cf7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1cf7d3000-0x1cf7fdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001cf7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000af63efff]
[ 0.000000] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001cf7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cf7fffff]
[ 0.000000] On node 0 totalpages: 1568220
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11161 pages used for memmap
[ 0.000000] DMA32 zone: 714304 pages, LIFO batch:31
[ 0.000000] Normal zone: 13280 pages used for memmap
[ 0.000000] Normal zone: 849920 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1543694
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=745fb55a-7f70-4b8e-aa62-a385f413726b ro raid=noautodetect profile
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6021640K/6272880K available (12300K kernel code, 2471K rwdata, 4244K rodata, 2408K init, 2416K bss, 251240K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39147 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2195.006 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.01 BogoMIPS (lpj=8780024)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.028036] Security Framework initialized
[ 0.028119] Yama: becoming mindful.
[ 0.028224] AppArmor: AppArmor initialized
[ 0.029505] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030233] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030355] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030464] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030808] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.030896] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.030990] mce: CPU supports 9 MCE banks
[ 0.031091] process: using mwait in idle threads
[ 0.031178] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.031263] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.031353] Spectre V2 : Mitigation: Full generic retpoline
[ 0.031440] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.031555] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.031646] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.031875] Freeing SMP alternatives memory: 36K
[ 0.036076] TSC deadline timer enabled
[ 0.036080] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.036279] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.036426] ... version: 3
[ 0.036508] ... bit width: 48
[ 0.036591] ... generic registers: 4
[ 0.036674] ... value mask: 0000ffffffffffff
[ 0.036760] ... max period: 00007fffffffffff
[ 0.036847] ... fixed-purpose events: 3
[ 0.036930] ... event mask: 000000070000000f
[ 0.037055] Hierarchical SRCU implementation.
[ 0.038349] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.038458] smp: Bringing up secondary CPUs ...
[ 0.038626] x86: Booting SMP configuration:
[ 0.038710] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.054474] smp: Brought up 1 node, 8 CPUs
[ 0.054474] smpboot: Max logical packages: 1
[ 0.056004] smpboot: Total of 8 processors activated (35120.09 BogoMIPS)
[ 0.060332] devtmpfs: initialized
[ 0.060332] x86/mm: Memory block size: 128MB
[ 0.060828] evm: security.selinux
[ 0.060910] evm: security.SMACK64
[ 0.060991] evm: security.SMACK64EXEC
[ 0.061073] evm: security.SMACK64TRANSMUTE
[ 0.061156] evm: security.SMACK64MMAP
[ 0.061237] evm: security.apparmor
[ 0.061318] evm: security.ima
[ 0.061399] evm: security.capability
[ 0.061497] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[ 0.061497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.061497] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.061497] pinctrl core: initialized pinctrl subsystem
[ 0.061497] RTC time: 19:05:59, date: 09/16/18
[ 0.061497] NET: Registered protocol family 16
[ 0.061497] audit: initializing netlink subsys (disabled)
[ 0.061497] audit: type=2000 audit(1537124758.060:1): state=initialized audit_enabled=0 res=1
[ 0.061497] cpuidle: using governor ladder
[ 0.061497] cpuidle: using governor menu
[ 0.061497] Simple Boot Flag at 0x44 set to 0x1
[ 0.061497] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.061497] ACPI: bus type PCI registered
[ 0.061497] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.064048] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064177] PCI: Using configuration type 1 for base access
[ 0.064177] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.064425] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.064514] mtrr: probably your BIOS does not setup all CPUs.
[ 0.064601] mtrr: corrected configuration.
[ 0.065875] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.065877] ACPI: Added _OSI(Module Device)
[ 0.065877] ACPI: Added _OSI(Processor Device)
[ 0.065877] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.065877] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.065877] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.065877] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.065877] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.076509] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.077502] ACPI: Dynamic OEM Table Load:
[ 0.077595] ACPI: SSDT 0xFFFF958B07517800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.078346] ACPI: Dynamic OEM Table Load:
[ 0.078435] ACPI: SSDT 0xFFFF958B07763000 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.079010] ACPI: Dynamic OEM Table Load:
[ 0.079099] ACPI: SSDT 0xFFFF958B07751C00 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.081710] ACPI: EC: EC started
[ 0.081790] ACPI: EC: interrupt blocked
[ 0.082157] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.082246] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.082359] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.082472] ACPI: Interpreter enabled
[ 0.082579] ACPI: (supports S0 S3 S4 S5)
[ 0.082662] ACPI: Using IOAPIC for interrupt routing
[ 0.082781] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.083199] ACPI: GPE 0x1C active on init
[ 0.083297] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.085973] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[ 0.092809] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.092904] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.093084] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.094002] PCI host bridge to bus 0000:00
[ 0.094089] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.094181] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.094272] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.094386] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[ 0.094499] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.094594] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.094711] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.094752] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.094880] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.094908] pci 0000:00:16.0: reg 0x10: [mem 0xc3404000-0xc340400f 64bit]
[ 0.094988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.095092] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.095740] pci 0000:00:1a.0: reg 0x10: [mem 0xc340a000-0xc340a3ff]
[ 0.097614] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.097720] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.097744] pci 0000:00:1b.0: reg 0x10: [mem 0xc3400000-0xc3403fff 64bit]
[ 0.097824] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.097931] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.098021] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.098129] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.098218] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.098328] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.098417] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.098523] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.098611] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.098719] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.099351] pci 0000:00:1d.0: reg 0x10: [mem 0xc3409000-0xc34093ff]
[ 0.101148] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.101254] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.101461] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.101481] pci 0000:00:1f.2: reg 0x10: [io 0x4060-0x4067]
[ 0.101490] pci 0000:00:1f.2: reg 0x14: [io 0x40b4-0x40b7]
[ 0.101499] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.101507] pci 0000:00:1f.2: reg 0x1c: [io 0x409c-0x409f]
[ 0.101516] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.101525] pci 0000:00:1f.2: reg 0x24: [mem 0xc3408000-0xc34087ff]
[ 0.101570] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.101667] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.101688] pci 0000:00:1f.3: reg 0x10: [mem 0xc3406000-0xc34060ff 64bit]
[ 0.101710] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.101888] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030000
[ 0.101903] pci 0000:01:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[ 0.101912] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.101921] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.101927] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.101934] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.101941] pci 0000:01:00.0: enabling Extended Tags
[ 0.102144] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.102158] pci 0000:01:00.1: reg 0x10: [mem 0xc3000000-0xc3003fff]
[ 0.102190] pci 0000:01:00.1: enabling Extended Tags
[ 0.112040] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.112133] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.112135] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc30fffff]
[ 0.112139] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.112205] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.112389] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.112432] pci 0000:08:00.0: reg 0x10: [mem 0xc3300000-0xc3301fff 64bit]
[ 0.112589] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.124047] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.124146] pci 0000:00:1c.1: bridge window [mem 0xc3300000-0xc33fffff]
[ 0.124236] pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
[ 0.124281] pci 0000:09:00.0: reg 0x10: [mem 0xc3200000-0xc320ffff 64bit]
[ 0.124441] pci 0000:09:00.0: supports D1
[ 0.124443] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.136046] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.136144] pci 0000:00:1c.5: bridge window [mem 0xc3200000-0xc32fffff]
[ 0.136286] pci 0000:0a:00.0: [1969:1083] type 00 class 0x020000
[ 0.136431] pci 0000:0a:00.0: reg 0x10: [mem 0xc3100000-0xc313ffff 64bit]
[ 0.136480] pci 0000:0a:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.136966] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148079] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[ 0.148179] pci 0000:00:1c.6: bridge window [io 0x2000-0x2fff]
[ 0.148184] pci 0000:00:1c.6: bridge window [mem 0xc3100000-0xc31fffff]
[ 0.148884] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.149070] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.149274] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.149457] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.149640] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.149845] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.150048] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.150229] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.150781] ACPI: EC: interrupt unblocked
[ 0.150867] ACPI: EC: event unblocked
[ 0.150952] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.151062] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.151406] SCSI subsystem initialized
[ 0.151503] libata version 3.00 loaded.
[ 0.151503] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.151503] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.151503] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.151503] vgaarb: loaded
[ 0.151503] ACPI: bus type USB registered
[ 0.152018] usbcore: registered new interface driver usbfs
[ 0.152110] usbcore: registered new interface driver hub
[ 0.152218] usbcore: registered new device driver usb
[ 0.152337] EDAC MC: Ver: 3.0.0
[ 0.152337] PCI: Using ACPI for IRQ routing
[ 0.159323] PCI: pci_cache_line_size set to 64 bytes
[ 0.159382] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.159384] e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff]
[ 0.159385] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.159386] e820: reserve RAM buffer [mem 0x1cf800000-0x1cfffffff]
[ 0.159482] NetLabel: Initializing
[ 0.159560] NetLabel: domain hash size = 128
[ 0.159639] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.159740] NetLabel: unlabeled traffic allowed by default
[ 0.160260] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.160351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.163463] clocksource: Switched to clocksource hpet
[ 0.171888] VFS: Disk quotas dquot_6.6.0
[ 0.171992] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.172197] AppArmor: AppArmor Filesystem Enabled
[ 0.172313] pnp: PnP ACPI init
[ 0.172625] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.172711] system 00:00: [io 0x1004-0x1013] has been reserved
[ 0.172797] system 00:00: [io 0xffff] has been reserved
[ 0.172883] system 00:00: [io 0xffff] has been reserved
[ 0.172966] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.173052] system 00:00: [io 0x0458-0x047f] could not be reserved
[ 0.173139] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.173224] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.173314] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.173407] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.173497] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.173539] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.173576] pnp 00:04: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
[ 0.173775] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.173864] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.173951] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.174037] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.174125] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.174212] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.174300] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.174387] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.174475] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.174564] system 00:05: [mem 0xc3500000-0xc3500fff] has been reserved
[ 0.174653] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174999] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.175087] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.175178] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.175313] pnp: PnP ACPI: found 7 devices
[ 0.181863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.181981] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.182138] pci 0000:01:00.0: BAR 6: assigned [mem 0xc3080000-0xc30fffff pref]
[ 0.182248] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.182332] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.182419] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc30fffff]
[ 0.182508] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.182620] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.182712] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.182798] pci 0000:00:1c.1: bridge window [mem 0xc3300000-0xc33fffff]
[ 0.182892] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.182978] pci 0000:00:1c.5: bridge window [mem 0xc3200000-0xc32fffff]
[ 0.183073] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[ 0.183157] pci 0000:00:1c.6: bridge window [io 0x2000-0x2fff]
[ 0.183245] pci 0000:00:1c.6: bridge window [mem 0xc3100000-0xc31fffff]
[ 0.183340] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.183342] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.183343] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.183345] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[ 0.183347] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.183348] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc30fffff]
[ 0.183350] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.183352] pci_bus 0000:08: resource 1 [mem 0xc3300000-0xc33fffff]
[ 0.183354] pci_bus 0000:09: resource 1 [mem 0xc3200000-0xc32fffff]
[ 0.183356] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 0.183357] pci_bus 0000:0a: resource 1 [mem 0xc3100000-0xc31fffff]
[ 0.183474] NET: Registered protocol family 2
[ 0.183752] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.184000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.184220] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.184345] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184459] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184606] NET: Registered protocol family 1
[ 0.224226] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.245383] pci 0000:0a:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.245509] PCI: CLS 64 bytes, default 64
[ 0.245558] Unpacking initramfs...
[ 1.238581] Freeing initrd memory: 57244K
[ 1.238752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.238840] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.239219] Scanning for low memory corruption every 60 seconds
[ 1.240099] Initialise system trusted keyrings
[ 1.240190] Key type blacklist registered
[ 1.240313] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.241645] zbud: loaded
[ 1.242246] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.242471] fuse init (API version 7.26)
[ 1.243981] Key type asymmetric registered
[ 1.244088] Asymmetric key parser 'x509' registered
[ 1.244212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.244358] io scheduler noop registered
[ 1.244438] io scheduler deadline registered
[ 1.244562] io scheduler cfq registered (default)
[ 1.245461] intel_idle: MWAIT substates: 0x21120
[ 1.245463] intel_idle: v0.4.1 model 0x2A
[ 1.245782] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.245920] ACPI: AC Adapter [ACAD] (on-line)
[ 1.246063] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.246184] ACPI: Power Button [PWRB]
[ 1.246298] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.246437] ACPI: Lid Switch [LID]
[ 1.246550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.246679] ACPI: Power Button [PWRF]
[ 1.247399] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.249609] Linux agpgart interface v0.103
[ 1.251841] loop: module loaded
[ 1.252131] libphy: Fixed MDIO Bus: probed
[ 1.252212] tun: Universal TUN/TAP device driver, 1.6
[ 1.252348] PPP generic driver version 2.4.2
[ 1.252486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.252575] ehci-pci: EHCI PCI platform driver
[ 1.252790] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.252878] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.252999] ehci-pci 0000:00:1a.0: debug port 2
[ 1.256975] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.256989] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc340a000
[ 1.272017] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.272149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.272238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.272346] usb usb1: Product: EHCI Host Controller
[ 1.272429] usb usb1: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[ 1.272515] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.272750] hub 1-0:1.0: USB hub found
[ 1.272835] hub 1-0:1.0: 2 ports detected
[ 1.273150] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.273238] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.273358] ehci-pci 0000:00:1d.0: debug port 2
[ 1.277330] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.277341] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3409000
[ 1.292024] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.292138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.292233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292341] usb usb2: Product: EHCI Host Controller
[ 1.292424] usb usb2: Manufacturer: Linux 4.15.0-34-generic ehci_hcd
[ 1.292510] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.292737] hub 2-0:1.0: USB hub found
[ 1.292826] hub 2-0:1.0: 2 ports detected
[ 1.293016] ehci-platform: EHCI generic platform driver
[ 1.293109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.293195] ohci-pci: OHCI PCI platform driver
[ 1.293285] ohci-platform: OHCI generic platform driver
[ 1.293373] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.293545] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 1.293633] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[ 1.293912] xhci_hcd 0000:08:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
[ 1.294328] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.294417] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.294526] usb usb3: Product: xHCI Host Controller
[ 1.294608] usb usb3: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[ 1.294694] usb usb3: SerialNumber: 0000:08:00.0
[ 1.294908] hub 3-0:1.0: USB hub found
[ 1.294997] hub 3-0:1.0: 2 ports detected
[ 1.295166] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 1.295251] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
[ 1.295362] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
[ 1.297335] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.297464] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.297552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.297660] usb usb4: Product: xHCI Host Controller
[ 1.297742] usb usb4: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
[ 1.297829] usb usb4: SerialNumber: 0000:08:00.0
[ 1.298037] hub 4-0:1.0: USB hub found
[ 1.298125] hub 4-0:1.0: 2 ports detected
[ 1.298334] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.306652] i8042: Detected active multiplexing controller, rev 1.1
[ 1.311433] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.311519] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.311629] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.311732] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.311837] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.312117] mousedev: PS/2 mouse device common for all mice
[ 1.312523] rtc_cmos 00:01: RTC can wake from S4
[ 1.312616] rtc_cmos: probe of 00:01 failed with error -16
[ 1.312715] i2c /dev entries driver
[ 1.312839] device-mapper: uevent: version 1.0.3
[ 1.313022] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.313139] intel_pstate: Intel P-state driver initializing
[ 1.313833] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.314383] NET: Registered protocol family 10
[ 1.318661] Segment Routing with IPv6
[ 1.318756] NET: Registered protocol family 17
[ 1.318895] Key type dns_resolver registered
[ 1.319493] RAS: Correctable Errors collector initialized.
[ 1.319629] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[ 1.319803] microcode: Microcode Update Driver: v2.2.
[ 1.319811] sched_clock: Marking stable (1319798323, 0)->(1315065429, 4732894)
[ 1.320267] registered taskstats version 1
[ 1.320352] Loading compiled-in X.509 certificates
[ 1.322748] Loaded X.509 cert 'Build time autogenerated kernel key: 197c80222fd2638086c51a9b9e4961ca73d6ea07'
[ 1.322879] zswap: loaded using pool lzo/zbud
[ 1.325862] Key type big_key registered
[ 1.325943] Key type trusted registered
[ 1.327499] Key type encrypted registered
[ 1.327581] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.327664] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.327751] ima: Allocated hash algorithm: sha1
[ 1.327842] evm: HMAC attrs: 0x1
[ 1.328270] Magic number: 2:749:91
[ 1.328414] hctosys: unable to open rtc device (rtc0)
[ 1.328558] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.328641] EDD information not available.
[ 1.360220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.608125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.628129] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.628242] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.664294] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.664431] ACPI: Battery Slot [BAT1] (battery present)
[ 1.666554] Freeing unused kernel memory: 2408K
[ 1.688119] Write protecting the kernel read-only data: 20480k
[ 1.688780] Freeing unused kernel memory: 2008K
[ 1.692718] Freeing unused kernel memory: 1900K
[ 1.698820] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.698903] x86/mm: Checking user space page tables
[ 1.704790] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.761873] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 1.762037] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.764366] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.764462] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.764765] hub 1-1:1.0: USB hub found
[ 1.764989] hub 1-1:1.0: 6 ports detected
[ 1.774957] ahci 0000:00:1f.2: version 3.0
[ 1.775168] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.784743] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.784837] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.785148] hub 2-1:1.0: USB hub found
[ 1.785368] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[ 1.785491] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.785618] hub 2-1:1.0: 6 ports detected
[ 1.808725] scsi host0: ahci
[ 1.808990] scsi host1: ahci
[ 1.809264] scsi host2: ahci
[ 1.809593] scsi host3: ahci
[ 1.809804] scsi host4: ahci
[ 1.810027] scsi host5: ahci
[ 1.810182] ata1: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408100 irq 32
[ 1.811598] ata2: DUMMY
[ 1.811672] ata3: DUMMY
[ 1.811745] ata4: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408280 irq 32
[ 1.811852] ata5: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408300 irq 32
[ 1.811959] ata6: DUMMY
[ 1.814536] usb 3-1: New USB device found, idVendor=046d, idProduct=c534
[ 1.814624] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.814712] usb 3-1: Product: USB Receiver
[ 1.814790] usb 3-1: Manufacturer: Logitech
[ 1.817964] atl1c 0000:0a:00.0: version 1.0.1.1-NAPI
[ 1.824996] atl1c 0000:0a:00.0 enp10s0: renamed from eth0
[ 1.827379] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.867492] usbcore: registered new interface driver usbhid
[ 1.867580] usbhid: USB HID core driver
[ 1.869471] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.0/0003:046D:C534.0001/input/input10
[ 1.928095] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:08:00.0-1/input0
[ 1.928430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:08:00.0/usb3/3-1/3-1:1.1/0003:046D:C534.0002/input/input11
[ 1.988138] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:08:00.0-1/input1
[ 2.052024] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 2.072022] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.126457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.128126] ata1.00: supports DRM functions and may not be fully accessible
[ 2.128879] ata1.00: disabling queued TRIM support
[ 2.128880] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 2.128967] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.130740] ata1.00: supports DRM functions and may not be fully accessible
[ 2.131361] ata1.00: disabling queued TRIM support
[ 2.132797] ata1.00: configured for UDMA/133
[ 2.133128] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 2.133499] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.133517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.133733] sd 0:0:0:0: [sda] Write Protect is off
[ 2.133813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.133825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.134488] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.135594] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.135674] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.189072] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b1d6
[ 2.189180] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.189281] usb 1-1.4: Product: CNF9055
[ 2.189353] usb 1-1.4: Manufacturer: Sonix Technology Co., Ltd.
[ 2.193475] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[ 2.193556] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.193657] usb 2-1.5: Product: USB2.0-CRW
[ 2.193729] usb 2-1.5: Manufacturer: Generic
[ 2.193802] usb 2-1.5: SerialNumber: 20090516388200000
[ 2.202902] usbcore: registered new interface driver usb-storage
[ 2.204245] usbcore: registered new interface driver uas
[ 2.205475] ums-realtek 2-1.5:1.0: USB Mass Storage device detected
[ 2.224445] scsi host6: usb-storage 2-1.5:1.0
[ 2.224592] usbcore: registered new interface driver ums-realtek
[ 2.268027] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 2.268136] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 2.272129] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[ 2.303405] random: fast init done
[ 2.303686] usb 2-1.5: USB disconnect, device number 3
[ 2.303969] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.304088] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.304181] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.380940] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[ 2.381028] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.447138] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.595957] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 2.680924] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 2.734497] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 2.763845] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.768955] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO02, max UDMA/100
[ 2.771846] ata5.00: configured for UDMA/100
[ 2.777401] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB TO02 PQ: 0 ANSI: 5
[ 2.848988] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.849114] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.849426] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.849504] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.292410] clocksource: Switched to clocksource tsc
[ 393.586151] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 545.362365] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 545.368238] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 545.388232] systemd[1]: Detected architecture x86-64.
[ 545.390879] systemd[1]: Set hostname to <gerard-SATELLITE-L750>.
[ 545.465694] systemd[1]: Reached target Remote File Systems.
[ 545.466332] systemd[1]: Created slice User and Session Slice.
[ 545.466773] systemd[1]: Reached target User and Group Name Lookups.
[ 545.467241] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 545.467705] systemd[1]: Reached target System Time Synchronized.
[ 545.468301] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 545.468883] systemd[1]: Created slice System Slice.
[ 545.483436] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 545.494262] lp: driver loaded but no devices found
[ 545.497840] ppdev: user-space parallel port driver
[ 545.556057] systemd-journald[392]: Received request to flush runtime journal from PID 1
[ 545.641485] audit: type=1400 audit(1537125303.636:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=505 comm="apparmor_parser"
[ 545.641591] audit: type=1400 audit(1537125303.636:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=508 comm="apparmor_parser"
[ 545.641898] audit: type=1400 audit(1537125303.636:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=504 comm="apparmor_parser"
[ 545.641902] audit: type=1400 audit(1537125303.636:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=504 comm="apparmor_parser"
[ 545.641905] audit: type=1400 audit(1537125303.636:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=504 comm="apparmor_parser"
[ 545.642072] audit: type=1400 audit(1537125303.636:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=509 comm="apparmor_parser"
[ 545.642661] audit: type=1400 audit(1537125303.636:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=506 comm="apparmor_parser"
[ 545.642665] audit: type=1400 audit(1537125303.636:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=506 comm="apparmor_parser"
[ 545.643219] audit: type=1400 audit(1537125303.636:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=511 comm="apparmor_parser"
[ 545.644763] audit: type=1400 audit(1537125303.640:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=512 comm="apparmor_parser"
[ 545.986061] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[ 545.986408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 546.020713] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 546.020721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 546.020725] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 546.020730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 546.020732] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 546.020737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 546.020738] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 546.020743] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 546.020744] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 546.020747] lpc_ich 0000:00:1f.0: No MFD cells added
[ 546.026331] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 546.031010] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 546.055390] media: Linux media interface: v0.10
[ 546.063284] Linux video capture interface: v2.00
[ 546.072200] Bluetooth: Core ver 2.22
[ 546.072216] NET: Registered protocol family 31
[ 546.072217] Bluetooth: HCI device and connection manager initialized
[ 546.072220] Bluetooth: HCI socket layer initialized
[ 546.072222] Bluetooth: L2CAP socket layer initialized
[ 546.072228] Bluetooth: SCO socket layer initialized
[ 546.080153] Adding 1952764k swap on /dev/sda6. Priority:-2 extents:1 across:1952764k SSFS
[ 546.080380] usbcore: registered new interface driver btusb
[ 546.082027] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 546.091553] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 546.091556] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized!
[ 546.091558] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 546.091639] input: CNF9055: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14
[ 546.091707] usbcore: registered new interface driver uvcvideo
[ 546.091708] USB Video Class driver (1.1.1)
[ 546.097735] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 546.097741] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 546.110544] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[ 546.111004] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 546.111007] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 546.111009] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 546.111011] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 546.111012] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 546.111015] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 546.111017] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1a
[ 546.112685] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 546.118319] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 546.118397] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 546.118782] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 546.118784] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 546.118785] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 546.118786] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 546.121661] ath: phy0: ASPM enabled: 0x42
[ 546.121664] ath: EEPROM regdomain: 0x65
[ 546.121664] ath: EEPROM indicates we should expect a direct regpair map
[ 546.121665] ath: Country alpha2 being used: 00
[ 546.121666] ath: Regpair used: 0x65
[ 546.138354] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 546.138982] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa38981480000, irq=17
[ 546.143159] AVX version of gcm_enc/dec engaged.
[ 546.143160] AES CTR mode by8 optimization enabled
[ 546.274307] intel_rapl: Found RAPL domain package
[ 546.274309] intel_rapl: Found RAPL domain core
[ 546.274314] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 546.302019] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0
[ 546.398583] usbcore: registered new interface driver ath3k
[ 546.517551] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
[ 546.518440] atl1c 0000:0a:00.0: atl1c: enp10s0 NIC Link is Up<100 Mbps Full Duplex>
[ 546.528477] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 546.534730] usb 1-1.6: USB disconnect, device number 4
[ 546.543681] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 546.604662] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 547.012052] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[ 547.121141] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[ 547.121144] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 547.148514] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 547.148515] Bluetooth: BNEP filters: protocol multicast
[ 547.148519] Bluetooth: BNEP socket layer initialized
[ 547.344695] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 547.344792] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 547.344856] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 547.344916] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 569.452556] Bluetooth: RFCOMM TTY layer initialized
[ 569.452563] Bluetooth: RFCOMM socket layer initialized
[ 569.452570] Bluetooth: RFCOMM ver 1.11
[ 571.655502] random: crng init done
[ 571.655513] random: 7 urandom warning(s) missed due to ratelimiting
Code: Select all
gerard@gerard-SATELLITE-L750:~$ systemd-analyze time
Startup finished in 9min 5.337s (kernel) + 2.435s (userspace) = 9min 7.772s
graphical.target reached after 1.176s in userspace
Code: Select all
gerard@gerard-SATELLITE-L750:~$ systemd-analyze blame
786ms apt-daily.service
600ms dev-sda5.device
531ms upower.service
510ms apt-daily-upgrade.service
I have removed the btrfs tools and progs as suggested in one of the posts, am running the nouveau display driver 1:1.0.15-2, and tried several other suggestions ((e.g. using different clocksource) from the forum.
I hope the report that the Samsung SSD drive is a complete disaster with Linux Mint is not true (anymore ?).
Suggestions on how to get this system to boot faster are highly appreciated ! Thanks in advance for taking the time to read through this...
Gerard