Fresh install of Cinnamon 19 on new SSD Very slow to boot

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
Bimbo

Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

I have seen that a few people have problems with a slow boot but the answers seem different depending on the setup so I thought it best to start a personal topic. this was a fresh install of Mint 19 Cinnamon on a new SSD.

Code: Select all

whitmore@Frankie:~$ inxi
CPU~Quad core AMD Phenom II X4 960T (-MCP-) speed/max~803/3000 MHz Kernel~4.15.0-38-generic i686 Up~18 min Mem~760.3/4032.1MB HDD~3500.7GB(0.6% used) Procs~197 Client~Shell inxi~2.3.56  
whitmore@Frankie:~$ inxi -Fxz
System:    Host: Frankie Kernel: 4.15.0-38-generic i686 bits: 32 gcc: 7.3.0
           Desktop: Cinnamon 3.8.9 (Gtk 3.22.30-1ubuntu1)
           Distro: Linux Mint 19 Tara
Machine:   Device: desktop Mobo: Gigabyte model: GA-MA770-UD3 serial: N/A
           BIOS: Award v: FKd date: 01/06/2011
CPU:       Quad core AMD Phenom II X4 960T (-MCP-) 
           arch: K10 rev.0 cache: 2048 KB
           flags: (lm nx pae sse sse2 sse3 sse4a svm) bmips: 24107
           clock speeds: max: 3000 MHz 1: 803 MHz 2: 1131 MHz 3: 919 MHz
           4: 803 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Cypress PRO [Radeon HD 5850]
           bus-ID: 01:00.0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           OpenGL: renderer: AMD CYPRESS (DRM 2.50.0 / 4.15.0-38-generic, LLVM 6.0.0)
           version: 4.3 Mesa 18.0.5 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Cypress HDMI Audio [Radeon HD 5830/5850/5870 / 6850/6870 Rebrand]
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2
           Sound: Advanced Linux Sound Architecture v: k4.15.0-38-generic
Network:   Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: de00 bus-ID: 02:00.0
           IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 3500.7GB (0.6% used)
           ID-1: /dev/sda model: Samsung_SSD_860 size: 500.1GB
           ID-2: /dev/sdb model: WDC_WD5000AAKS size: 500.1GB
           ID-3: /dev/sdc model: ST2000DM001 size: 2000.4GB
           ID-4: /dev/sdd model: WDC_WD5000ABPS size: 500.1GB
Partition: ID-1: / size: 454G used: 16G (4%) fs: ext4 dev: /dev/dm-0
           ID-2: swap-1 size: 4.29GB used: 0.00GB (0%)
           fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 19.6C mobo: N/A gpu: 42.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 195 Uptime: 1:12 Memory: 737.1/4032.1MB
           Init: systemd runlevel: 5 Gcc sys: 7.3.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56

Code: Select all

whitmore@Frankie:~$ systemd-analyze
Startup finished in 3min 18.491s (kernel) + 8.071s (userspace) = 3min 26.562s
graphical.target reached after 1.816s in userspace
whitmore@Frankie:~$ systemd-analyze blame
          5.740s apt-daily.service
          1.265s dev-mapper-mint\x2d\x2dvg\x2droot.device
           722ms systemd-modules-load.service
           654ms systemd-journal-flush.service
           651ms systemd-udevd.service
           635ms apparmor.service
           573ms apt-daily-upgrade.service
           567ms dns-clean.service
           369ms upower.service
           290ms udisks2.service
           289ms lvm2-pvscan@8:1.service
           251ms NetworkManager.service
           245ms systemd-logind.service
           195ms lvm2-monitor.service
           194ms networkd-dispatcher.service
           140ms ubuntu-system-adjustments.service
           138ms accounts-daemon.service
           122ms systemd-timesyncd.service
           114ms avahi-daemon.service
           113ms grub-common.service
           107ms ModemManager.service
           104ms systemd-resolved.service
           101ms systemd-tmpfiles-setup-dev.service
Maybe three minutes isn't that long but it sure seems like it, comparatively.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Top
User avatar
Moem
Level 22
Level 22
Posts: 16233
Joined: Tue Nov 17, 2015 9:14 am
Location: The Netherlands
Contact:
Contact Moem

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Moem »

Bimbo wrote: ⤴Thu Nov 01, 2018 6:10 am the answers seem different depending on the setup so I thought it best to start a personal topic.
It is. Good thinking, and welcome.
Image

If your issue is solved, kindly indicate that by editing the first post in the topic, and adding [SOLVED] to the title. Thanks!
Top
Bimbo

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

Moem, Thank you for your reply and for your edit, I didn't know how to post it like that.
Top
Bimbo

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

ran dmesg - saw that it was asked for elsewhere and thought it may help

Part 1

Code: Select all

[    0.055193] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.055306] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.055325] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[    0.055399] pci 0000:00:12.2: supports D1 D2
[    0.055400] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.055466] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.055482] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.055591] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.055607] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.055718] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.055738] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.055811] pci 0000:00:13.2: supports D1 D2
[    0.055812] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.055880] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.056046] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.056065] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.056073] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.056082] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.056090] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.056098] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.056117] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.056118] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.056119] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.056120] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.056206] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.056229] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.056296] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.056356] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.056480] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.056574] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.056590] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[    0.056702] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.056759] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.056815] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.056870] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.056925] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.057014] pci 0000:01:00.0: [1002:6899] type 00 class 0x030000
[    0.057032] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.057041] pci 0000:01:00.0: reg 0x18: [mem 0xfdfc0000-0xfdfdffff 64bit]
[    0.057047] pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
[    0.057057] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.057062] pci 0000:01:00.0: enabling Extended Tags
[    0.057094] pci 0000:01:00.0: supports D1 D2
[    0.057130] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300
[    0.057148] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
[    0.057176] pci 0000:01:00.1: enabling Extended Tags
[    0.057207] pci 0000:01:00.1: supports D1 D2
[    0.068017] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.068021] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.068023] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.068026] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.068074] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.068095] pci 0000:02:00.0: reg 0x10: [io  0xde00-0xdeff]
[    0.068114] pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
[    0.068126] pci 0000:02:00.0: reg 0x20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
[    0.068134] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.068194] pci 0000:02:00.0: supports D1 D2
[    0.068196] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080023] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.080027] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.080029] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.080032] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.080096] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.080123] pci 0000:03:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
[    0.080135] pci 0000:03:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff]
[    0.080227] pci 0000:03:0e.0: supports D1 D2
[    0.080228] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.080286] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.080289] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.080293] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.080296] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.080297] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.080299] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.080300] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.080302] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.080303] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[    0.080315] pci_bus 0000:00: on NUMA node 0
[    0.080388] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080388] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.080398] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.081013] SCSI subsystem initialized
[    0.081026] libata version 3.00 loaded.
[    0.081026] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.081026] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.081026] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.081026] vgaarb: loaded
[    0.081026] ACPI: bus type USB registered
[    0.081026] usbcore: registered new interface driver usbfs
[    0.081026] usbcore: registered new interface driver hub
[    0.081026] usbcore: registered new device driver usb
[    0.081026] EDAC MC: Ver: 3.0.0
[    0.081026] PCI: Using ACPI for IRQ routing
[    0.090276] PCI: pci_cache_line_size set to 64 bytes
[    0.090326] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.090327] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
[    0.090418] NetLabel: Initializing
[    0.090418] NetLabel:  domain hash size = 128
[    0.090419] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.090429] NetLabel:  unlabeled traffic allowed by default
[    0.090455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.090455] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.092053] clocksource: Switched to clocksource hpet
[    0.102245] VFS: Disk quotas dquot_6.6.0
[    0.102261] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.102347] AppArmor: AppArmor Filesystem Enabled
[    0.102367] pnp: PnP ACPI init
[    0.102452] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.102454] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.102456] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.102460] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.102673] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.102676] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.102692] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.102693] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.102695] system 00:01: [io  0x040b] has been reserved
[    0.102696] system 00:01: [io  0x04d6] has been reserved
[    0.102697] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.102698] system 00:01: [io  0x0c14] has been reserved
[    0.102699] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.102701] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.102702] system 00:01: [io  0x0c6f] has been reserved
[    0.102703] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.102704] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.102705] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.102706] system 00:01: [io  0x4000-0x40fe] has been reserved
[    0.102708] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.102709] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.102710] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.102711] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.102713] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.102716] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.102829] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.102939] pnp 00:03: [dma 2]
[    0.102959] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.103116] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.103282] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.103387] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.103390] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.103512] system 00:07: [mem 0x000cf200-0x000cffff] has been reserved
[    0.103513] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.103515] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.103516] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.103517] system 00:07: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[    0.103519] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
[    0.103520] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.103521] system 00:07: [mem 0x00100000-0xcfdeffff] could not be reserved
[    0.103523] system 00:07: [mem 0xcfe00000-0xcfefffff] has been reserved
[    0.103526] system 00:07: [mem 0xcff00000-0xcfffffff] could not be reserved
[    0.103528] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.103529] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.103531] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.103533] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.103547] pnp: PnP ACPI: found 8 devices
[    0.103548] PnPBIOS: Disabled
[    0.140427] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.140445] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[    0.140447] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.140449] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.140451] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.140452] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140455] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[    0.140457] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.140458] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.140460] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.140461] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.140464] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.140466] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.140470] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.140473] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.140479] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.140480] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.140481] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.140482] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.140483] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.140484] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.140486] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.140487] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.140488] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.140489] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.140490] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.140491] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.140492] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.140493] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.140494] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.140495] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.140496] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.140497] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.140498] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.140549] NET: Registered protocol family 2
[    0.140679] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.140694] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.140717] TCP: Hash tables configured (established 8192 bind 8192)
[    0.140746] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.140751] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.140790] NET: Registered protocol family 1
[    0.540191] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.540200] PCI: CLS 64 bytes, default 64
[    0.540242] Unpacking initramfs...
[    1.269334] Freeing initrd memory: 54772K
[    1.269376] LVT offset 1 assigned for vector 0x400
[    1.269385] IBS: LVT offset 1 assigned
[    1.269537] perf: AMD IBS detected (0x0000001f)
[    1.269589] Scanning for low memory corruption every 60 seconds
[    1.270132] Initialise system trusted keyrings
[    1.270140] Key type blacklist registered
[    1.270243] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    1.271196] zbud: loaded
[    1.271484] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.271687] fuse init (API version 7.26)
[    1.273892] Key type asymmetric registered
[    1.273893] Asymmetric key parser 'x509' registered
[    1.273903] bounce: pool size: 64 pages
[    1.273913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.273968] io scheduler noop registered
[    1.273968] io scheduler deadline registered
[    1.274007] io scheduler cfq registered (default)
[    1.274506] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.274507] vesafb: scrolling: redraw
[    1.274508] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.274522] vesafb: framebuffer at 0xd0000000, mapped to 0x(ptrval), using 5824k, total 5824k
[    1.274642] Console: switching to colour frame buffer device 175x65
[    1.274669] fb0: VESA VGA frame buffer device
[    1.274738] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.274746] ACPI: Power Button [PWRB]
[    1.274777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.274839] ACPI: Power Button [PWRF]
[    1.274860] ACPI: ACPI: processor limited to max C-state 1
[    1.275155] isapnp: Scanning for PnP cards...
[    1.275217] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.295795] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.297787] Linux agpgart interface v0.103
[    1.325760] loop: module loaded
[    1.325917] libphy: Fixed MDIO Bus: probed
[    1.325918] tun: Universal TUN/TAP device driver, 1.6
[    1.325971] PPP generic driver version 2.4.2
[    1.326013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.326015] ehci-pci: EHCI PCI platform driver
[    1.326151] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.326156] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.326160] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.326169] ehci-pci 0000:00:12.2: debug port 1
[    1.326213] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.340062] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.340124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.340125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.340126] usb usb1: Product: EHCI Host Controller
[    1.340128] usb usb1: Manufacturer: Linux 4.15.0-38-generic ehci_hcd
[    1.340129] usb usb1: SerialNumber: 0000:00:12.2
[    1.340232] hub 1-0:1.0: USB hub found
[    1.340237] hub 1-0:1.0: 6 ports detected
[    1.340478] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.340481] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.340483] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.340492] ehci-pci 0000:00:13.2: debug port 1
[    1.340532] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.356062] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.356098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.356099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.356100] usb usb2: Product: EHCI Host Controller
[    1.356101] usb usb2: Manufacturer: Linux 4.15.0-38-generic ehci_hcd
[    1.356102] usb usb2: SerialNumber: 0000:00:13.2
[    1.356197] hub 2-0:1.0: USB hub found
[    1.356201] hub 2-0:1.0: 6 ports detected
[    1.356316] ehci-platform: EHCI generic platform driver
[    1.356324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.356326] ohci-pci: OHCI PCI platform driver
[    1.356447] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.356450] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.356477] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.420093] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.420095] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.420096] usb usb3: Product: OHCI PCI host controller
[    1.420097] usb usb3: Manufacturer: Linux 4.15.0-38-generic ohci_hcd
[    1.420098] usb usb3: SerialNumber: 0000:00:12.0
[    1.420198] hub 3-0:1.0: USB hub found
[    1.420204] hub 3-0:1.0: 3 ports detected
[    1.420386] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.420390] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.420407] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.484093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.484095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.484096] usb usb4: Product: OHCI PCI host controller
[    1.484097] usb usb4: Manufacturer: Linux 4.15.0-38-generic ohci_hcd
[    1.484098] usb usb4: SerialNumber: 0000:00:12.1
[    1.484195] hub 4-0:1.0: USB hub found
[    1.484202] hub 4-0:1.0: 3 ports detected
[    1.484384] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.484388] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.484422] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.548128] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.548130] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.548131] usb usb5: Product: OHCI PCI host controller
[    1.548132] usb usb5: Manufacturer: Linux 4.15.0-38-generic ohci_hcd
[    1.548133] usb usb5: SerialNumber: 0000:00:13.0
[    1.548227] hub 5-0:1.0: USB hub found
[    1.548234] hub 5-0:1.0: 3 ports detected
[    1.548417] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.548421] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.548437] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.585426] isapnp: No Plug & Play device found
[    1.600051] random: fast init done
[    1.612122] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.612123] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.612124] usb usb6: Product: OHCI PCI host controller
[    1.612125] usb usb6: Manufacturer: Linux 4.15.0-38-generic ohci_hcd
[    1.612126] usb usb6: SerialNumber: 0000:00:13.1
[    1.612218] hub 6-0:1.0: USB hub found
[    1.612227] hub 6-0:1.0: 3 ports detected
[    1.612395] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.612398] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.612415] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.676090] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.676091] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.676092] usb usb7: Product: OHCI PCI host controller
[    1.676093] usb usb7: Manufacturer: Linux 4.15.0-38-generic ohci_hcd
[    1.676094] usb usb7: SerialNumber: 0000:00:14.5
[    1.676200] hub 7-0:1.0: USB hub found
[    1.676206] hub 7-0:1.0: 2 ports detected
[    1.676278] ohci-platform: OHCI generic platform driver
[    1.676284] uhci_hcd: USB Universal Host Controller Interface driver
[    1.676325] i8042: PNP: No PS/2 controller found.
[    1.676326] i8042: Probing ports directly.
[    1.710351] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.710352] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.860067] usb 4-2: new low-speed USB device number 2 using ohci-pci
[    1.976067] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    1.984159] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.984274] mousedev: PS/2 mouse device common for all mice
[    1.984425] rtc_cmos 00:02: RTC can wake from S4
[    1.984541] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.984576] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.984583] i2c /dev entries driver
[    1.984587] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    1.984659] device-mapper: uevent: version 1.0.3
[    1.984723] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.984740] platform eisa.0: Probing EISA bus 0
[    1.984742] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.984743] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.984744] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.984745] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.984746] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.984748] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.984749] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.984750] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.984751] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.984752] platform eisa.0: EISA: Detected 0 cards
[    1.984755] cpufreq_nforce2: No nForce2 chipset
[    1.984848] ledtrig-cpu: registered to indicate activity on CPUs
[    1.985025] NET: Registered protocol family 10
[    1.988719] Segment Routing with IPv6
[    1.988737] NET: Registered protocol family 17
[    1.988790] Key type dns_resolver registered
[    1.989077] microcode: microcode updated early to new patch_level=0x010000dc
[    1.989098] microcode: CPU0: patch_level=0x010000dc
[    1.989112] microcode: CPU1: patch_level=0x010000dc
[    1.989128] microcode: CPU2: patch_level=0x010000dc
[    1.989138] microcode: CPU3: patch_level=0x010000dc
[    1.989174] microcode: Microcode Update Driver: v2.2.
[    1.989176] Using IPI No-Shortcut mode
[    1.989182] sched_clock: Marking stable (1989169751, 0)->(2529002972, -539833221)
[    1.989459] registered taskstats version 1
[    1.989466] Loading compiled-in X.509 certificates
[    1.993903] Loaded X.509 cert 'Build time autogenerated kernel key: f0b8fac4d335ae9051ef61b1cecffaa6d3908cdd'
[    1.993920] zswap: loaded using pool lzo/zbud
[    1.997200] Key type big_key registered
[    1.997204] Key type trusted registered
[    1.998700] Key type encrypted registered
[    1.998703] AppArmor: AppArmor sha1 policy hashing enabled
[    1.998706] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.998710] ima: Allocated hash algorithm: sha1
[    1.998729] evm: HMAC attrs: 0x1
[    1.998921]   Magic number: 10:480:939
[    1.999016] rtc_cmos 00:02: setting system clock to 2018-11-01 14:56:38 UTC (1541084198)
[    1.999173] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.999283] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.999284] EDD information not available.
[    2.004621] Freeing unused kernel memory: 1092K
[    2.016132] Write protecting the kernel text: 8832k
[    2.016166] Write protecting the kernel read-only data: 3480k
[    2.016166] NX-protecting the kernel data: 7552k
[    2.016315] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.027772] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.027853] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.027863] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.082115] Floppy drive(s): fd0 is 1.44M
[    2.097177] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.097184] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.098413] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0x(ptrval), 00:24:1d:82:c8:dc, XID 1c4000c0 IRQ 24
[    2.098415] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.100141] scsi host0: pata_atiixp
[    2.103842] FDC 0 is a post-1991 82077
[    2.103865] scsi host1: pata_atiixp
[    2.103910] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    2.103911] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    2.103944] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247)
[    2.103949] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.104282] ahci 0000:00:11.0: version 3.0
[    2.104502] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.104505] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    2.105111] scsi host2: ahci
[    2.111430] scsi host3: ahci
[    2.111576] scsi host4: ahci
[    2.111912] scsi host5: ahci
[    2.111951] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    2.111953] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    2.111955] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    2.111957] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    2.117259] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.118135] usb 4-2: New USB device found, idVendor=051d, idProduct=0002
[    2.118137] usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.118138] usb 4-2: Product: Back-UPS ES 700G FW:871.O4 .I USB FW:O4 
[    2.118139] usb 4-2: Manufacturer: APC
[    2.118140] usb 4-2: SerialNumber: 5B1640T40707  
[    2.128220] hidraw: raw HID events driver (C) Jiri Kosina
[    2.160101] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.173445] [drm] radeon kernel modesetting enabled.
[    2.173503] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    2.173504] fb: switching to radeondrmfb from VESA VGA
[    2.173524] Console: switching to colour dummy device 80x25
[    2.173794] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1462:0x2091 0x00).
[    2.173819] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:07 [mem 0x000cf200-0x000cffff]
[    2.173823] caller pci_map_rom+0x66/0x110 mapping multiple BARs
[    2.174353] ATOM BIOS: 113
[    2.174416] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.174417] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    2.174420] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.174420] [drm] RAM width 256bits DDR
[    2.174519] [TTM] Zone  kernel: Available graphics memory: 423124 kiB
[    2.174520] [TTM] Zone highmem: Available graphics memory: 2064568 kiB
[    2.174521] [TTM] Initializing pool allocator
[    2.174524] [TTM] Initializing DMA pool allocator
[    2.174552] [drm] radeon: 1024M of VRAM memory ready
[    2.174553] [drm] radeon: 1024M of GTT memory ready.
[    2.174560] [drm] Loading CYPRESS Microcode
[    2.174622] [drm] Internal thermal controller with fan control
[    2.207205] usb 6-2: New USB device found, idVendor=e0ff, idProduct=0002
[    2.207208] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.207209] usb 6-2: Product: G3
[    2.207210] usb 6-2: Manufacturer: A.....
[    2.207670] [drm] radeon: dpm initialized
[    2.207740] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.208638] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    2.226890] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    2.226976] radeon 0000:01:00.0: WB enabled
[    2.226978] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(ptrval)
[    2.226979] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(ptrval)
[    2.228443] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(ptrval)
[    2.228444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.228445] [drm] Driver supports precise vblank timestamp query.
[    2.228446] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.228478] radeon 0000:01:00.0: radeon: using MSI.
[    2.228498] [drm] radeon: irq initialized.
[    2.244652] [drm] ring test on 0 succeeded in 1 usecs
[    2.244656] [drm] ring test on 3 succeeded in 2 usecs
[    2.288925] usbcore: registered new interface driver usbhid
[    2.288926] usbhid: USB HID core driver
[    2.292789] input: A..... G3 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:E0FF:0002.0001/input/input3
[    2.295993] hid-generic 0003:E0FF:0002.0001: input,hidraw0: USB HID v1.00 Mouse [A..... G3] on usb-0000:00:13.1-2/input0
[    2.296250] input: A..... G3 as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:E0FF:0002.0002/input/input4
[    2.296378] ata2.00: ATAPI: PIONEER DVD-RW  DVR-219L, 1.01, max UDMA/100
[    2.336391] ata2.00: configured for UDMA/100
[    2.349645] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-219L 1.01 PQ: 0 ANSI: 5
[    2.356167] hid-generic 0003:E0FF:0002.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [A..... G3] on usb-0000:00:13.1-2/input1
[    2.357066] hid-generic 0003:051D:0002.0003: hiddev1,hidraw2: USB HID v1.10 Device [APC Back-UPS ES 700G FW:871.O4 .I USB FW:O4 ] on usb-0000:00:12.1-2/input0
[    2.430345] tsc: Refined TSC clocksource calibration: 3013.618 MHz
[    2.430369] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b7086150bf, max_idle_ns: 440795320745 ns
[    2.430376] [drm] ring test on 5 succeeded in 1 usecs
[    2.430382] [drm] UVD initialized successfully.
[    2.430511] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.430558] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.588068] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.588090] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.588111] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.588385] ata3.00: supports DRM functions and may not be fully accessible
[    2.588822] ata5.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133
[    2.588824] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.589064] ata4.00: HPA detected: current 976771055, native 976773168
[    2.589145] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[    2.589146] ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.589263] ata3.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
[    2.589265] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.589630] ata5.00: configured for UDMA/133
[    2.590309] ata4.00: configured for UDMA/133
[    2.591643] ata3.00: supports DRM functions and may not be fully accessible
[    2.594488] ata3.00: configured for UDMA/133
[    2.600393] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.600402] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.600446] [drm] ib test on ring 5 succeeded
[    2.601135] [drm] Radeon Display Connectors
[    2.601136] [drm] Connector 0:
[    2.601136] [drm]   DP-1
[    2.601137] [drm]   HPD4
[    2.601138] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.601138] [drm]   Encoders:
[    2.601139] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.601139] [drm] Connector 1:
[    2.601140] [drm]   HDMI-A-1
[    2.601140] [drm]   HPD5
[    2.601141] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.601141] [drm]   Encoders:
[    2.601142] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.601142] [drm] Connector 2:
[    2.601143] [drm]   DVI-I-1
[    2.601143] [drm]   HPD6
[    2.601144] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    2.601144] [drm]   Encoders:
[    2.601145] [drm]     DFP3: INTERNAL_UNIPHY
[    2.601146] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.661486] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.661488] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.661612] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.661746] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.661947] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    2.662108] ata3.00: Enabling discard_zeroes_data
[    2.662140] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.662166] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.662179] sd 2:0:0:0: [sda] Write Protect is off
[    2.662181] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.662200] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.662279] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[    2.662313] ata3.00: Enabling discard_zeroes_data
[    2.662450] sd 3:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    2.662461] sd 3:0:0:0: [sdb] Write Protect is off
[    2.662462] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.662480] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.662481] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.662644] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5
[    2.662787] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.662810]  sda: sda1
[    2.662974] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.662976] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    2.662991] ata3.00: Enabling discard_zeroes_data
[    2.662993] sd 4:0:0:0: [sdc] Write Protect is off
[    2.662995] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.663020] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.664653] sd 2:0:0:0: [sda] supports TCG Opal
[    2.664655] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.677493]  sdb: sdb1 sdb2
[    2.677907] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.701147] firewire_core 0000:03:0e.0: created device fw0: GUID 0045b6f80000241d, S400
[    2.714978]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
[    2.715516] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.740879] [drm] fb mappable at 0xD034D000
[    2.740880] [drm] vram apper at 0xD0000000
[    2.740880] [drm] size 8294400
[    2.740881] [drm] fb depth is 24
[    2.740881] [drm]    pitch is 7680
[    2.740946] fbcon: radeondrmfb (fb0) is primary device
[    2.740994] Console: switching to colour frame buffer device 240x67
[    2.741031] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.756125] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.757781] usb 1-6: New USB device found, idVendor=05e3, idProduct=0605
[    2.757783] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.757785] usb 1-6: Product: USB2.0 Hub
[    2.758185] hub 1-6:1.0: USB hub found
[    2.758520] hub 1-6:1.0: 4 ports detected
[    2.968067] usb 6-3: new full-speed USB device number 3 using ohci-pci
[    3.012751] ata6.00: HPA detected: current 976771055, native 976773168
[    3.012847] ata6.00: ATA-8: WDC WD5000ABPS-01ZZB0, 02.01B01, max UDMA/133
[    3.012848] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Top
Bimbo

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

Part 2

Code: Select all

    3.013791] ata6.00: configured for UDMA/133
[    3.013966] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000ABPS-0 1B01 PQ: 0 ANSI: 5
[    3.014289] sd 5:0:0:0: [sdd] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    3.014316] sd 5:0:0:0: [sdd] Write Protect is off
[    3.014318] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.014341] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    3.014364] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.018178]  sdd: sdd1 sdd2
[    3.018646] sd 5:0:0:0: [sdd] Attached SCSI disk
[    3.048078] usb 1-6.2: new high-speed USB device number 4 using ehci-pci
[    3.156862] usb 1-6.2: New USB device found, idVendor=03f0, idProduct=c511
[    3.156864] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.156866] usb 1-6.2: Product: ENVY 4500 series
[    3.156867] usb 1-6.2: Manufacturer: HP
[    3.156868] usb 1-6.2: SerialNumber: CN47P143Z5060D
[    3.169267] usb 6-3: New USB device found, idVendor=1532, idProduct=021b
[    3.169269] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.169270] usb 6-3: Product: Razer BlackWidow X Tournament Edition
[    3.169271] usb 6-3: Manufacturer: Razer
[    3.175514] input: Razer Razer BlackWidow X Tournament Edition as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/0003:1532:021B.0004/input/input5
[    3.232187] hid-generic 0003:1532:021B.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow X Tournament Edition] on usb-0000:00:13.1-3/input0
[    3.235733] input: Razer Razer BlackWidow X Tournament Edition as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/0003:1532:021B.0005/input/input6
[    3.292164] hid-generic 0003:1532:021B.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer BlackWidow X Tournament Edition] on usb-0000:00:13.1-3/input1
[    3.295526] input: Razer Razer BlackWidow X Tournament Edition as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:1532:021B.0006/input/input7
[    3.295647] hid-generic 0003:1532:021B.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer BlackWidow X Tournament Edition] on usb-0000:00:13.1-3/input2
[    3.456139] clocksource: Switched to clocksource tsc
[    4.190314] random: crng init done
[    4.190316] random: 7 urandom warning(s) missed due to ratelimiting
[    4.380025] raid6: mmxx1    gen()  2782 MB/s
[    4.428013] raid6: mmxx2    gen()  5236 MB/s
[    4.476039] raid6: sse1x1   gen()  2112 MB/s
[    4.524038] raid6: sse1x2   gen()  3084 MB/s
[    4.572036] raid6: sse2x1   gen()  3593 MB/s
[    4.620006] raid6: sse2x1   xor()  4281 MB/s
[    4.668031] raid6: sse2x2   gen()  4621 MB/s
[    4.716002] raid6: sse2x2   xor()  6937 MB/s
[    4.764034] raid6: int32x1  gen()  1363 MB/s
[    4.812031] raid6: int32x1  xor()   856 MB/s
[    4.860033] raid6: int32x2  gen()  1575 MB/s
[    4.908007] raid6: int32x2  xor()  1077 MB/s
[    4.956015] raid6: int32x4  gen()  1274 MB/s
[    5.004015] raid6: int32x4  xor()   920 MB/s
[    5.052059] raid6: int32x8  gen()  1332 MB/s
[    5.100041] raid6: int32x8  xor()   876 MB/s
[    5.100042] raid6: using algorithm mmxx2 gen() 5236 MB/s
[    5.100043] raid6: using intx1 recovery algorithm
[    5.109860] xor: measuring software checksum speed
[    5.148025]    pIII_sse  : 12598.000 MB/sec
[    5.188025]    prefetch64-sse: 12949.000 MB/sec
[    5.188029] xor: using function: prefetch64-sse (12949.000 MB/sec)
[    5.224486] Btrfs loaded, crc32c=crc32c-generic
[   17.893096] print_req_error: I/O error, dev fd0, sector 0
[   17.893100] floppy: error 10 while reading block 0
[   60.413035] print_req_error: I/O error, dev fd0, sector 0
[   60.413039] floppy: error 10 while reading block 0
[   72.784443] print_req_error: I/O error, dev fd0, sector 0
[   72.784447] floppy: error 10 while reading block 0
[   85.276575] print_req_error: I/O error, dev fd0, sector 0
[   85.276578] floppy: error 10 while reading block 0
[   97.640438] print_req_error: I/O error, dev fd0, sector 0
[   97.640441] floppy: error 10 while reading block 0
[  111.141107] print_req_error: I/O error, dev fd0, sector 0
[  111.141111] floppy: error 10 while reading block 0
[  123.504453] print_req_error: I/O error, dev fd0, sector 0
[  123.504457] floppy: error 10 while reading block 0
[  135.992604] print_req_error: I/O error, dev fd0, sector 0
[  135.992607] floppy: error 10 while reading block 0
[  148.360449] print_req_error: I/O error, dev fd0, sector 0
[  148.360452] floppy: error 10 while reading block 0
[  160.961100] print_req_error: I/O error, dev fd0, sector 0
[  160.961103] floppy: error 10 while reading block 0
[  173.324423] print_req_error: I/O error, dev fd0, sector 0
[  173.324427] floppy: error 10 while reading block 0
[  185.829059] print_req_error: I/O error, dev fd0, sector 0
[  185.829062] floppy: error 10 while reading block 0
[  198.197106] print_req_error: I/O error, dev fd0, sector 0
[  198.197109] floppy: error 10 while reading block 0
[  198.544856] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  198.712004] ip_tables: (C) 2000-2006 Netfilter Core Team
[  198.719985] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  198.740198] systemd[1]: Detected architecture x86.
[  198.741772] systemd[1]: Set hostname to <Frankie>.
[  198.845513] systemd[1]: Created slice System Slice.
[  198.845590] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  198.845685] systemd[1]: Listening on Journal Audit Socket.
[  198.845696] systemd[1]: Reached target Remote File Systems.
[  198.845789] systemd[1]: Created slice User and Session Slice.
[  198.845837] systemd[1]: Listening on Journal Socket (/dev/log).
[  198.845888] systemd[1]: Listening on udev Control Socket.
[  198.864106] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[  198.876042] lp: driver loaded but no devices found
[  198.882313] ppdev: user-space parallel port driver
[  198.912996] ata3: log page 10h reported inactive tag 6
[  198.913004] ata3.00: exception Emask 0x1 SAct 0x1ff80 SErr 0x0 action 0x0
[  198.913005] ata3.00: irq_stat 0x40000009
[  198.913008] ata3.00: failed command: READ FPDMA QUEUED
[  198.913012] ata3.00: cmd 60/08:38:e0:13:80/00:00:0a:00:00/40 tag 7 ncq dma 4096 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913014] ata3.00: status: { DRDY }
[  198.913016] ata3.00: failed command: READ FPDMA QUEUED
[  198.913020] ata3.00: cmd 60/08:40:e8:13:80/00:00:0a:00:00/40 tag 8 ncq dma 4096 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913023] ata3.00: status: { DRDY }
[  198.913025] ata3.00: failed command: READ FPDMA QUEUED
[  198.913029] ata3.00: cmd 60/08:48:f0:13:80/00:00:0a:00:00/40 tag 9 ncq dma 4096 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913030] ata3.00: status: { DRDY }
[  198.913032] ata3.00: failed command: READ FPDMA QUEUED
[  198.913036] ata3.00: cmd 60/08:50:b0:13:80/00:00:0a:00:00/40 tag 10 ncq dma 4096 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913038] ata3.00: status: { DRDY }
[  198.913039] ata3.00: failed command: READ FPDMA QUEUED
[  198.913043] ata3.00: cmd 60/10:58:f8:13:80/00:00:0a:00:00/40 tag 11 ncq dma 8192 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913045] ata3.00: status: { DRDY }
[  198.913047] ata3.00: failed command: READ FPDMA QUEUED
[  198.913050] ata3.00: cmd 60/18:60:28:61:db/00:00:05:00:00/40 tag 12 ncq dma 12288 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913052] ata3.00: status: { DRDY }
[  198.913054] ata3.00: failed command: READ FPDMA QUEUED
[  198.913058] ata3.00: cmd 60/00:68:38:59:04/01:00:1b:00:00/40 tag 13 ncq dma 131072 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913059] ata3.00: status: { DRDY }
[  198.913061] ata3.00: failed command: READ FPDMA QUEUED
[  198.913065] ata3.00: cmd 60/88:70:c8:58:04/00:00:0f:00:00/40 tag 14 ncq dma 69632 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913067] ata3.00: status: { DRDY }
[  198.913068] ata3.00: failed command: READ FPDMA QUEUED
[  198.913072] ata3.00: cmd 60/20:78:00:0d:a1/00:00:00:00:00/40 tag 15 ncq dma 16384 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913074] ata3.00: status: { DRDY }
[  198.913075] ata3.00: failed command: READ FPDMA QUEUED
[  198.913079] ata3.00: cmd 60/58:80:30:2e:04/00:00:11:00:00/40 tag 16 ncq dma 45056 in
                        res 40/00:00:38:59:04/00:00:1b:00:00/40 Emask 0x1 (device error)
[  198.913081] ata3.00: status: { DRDY }
[  198.913388] ata3.00: supports DRM functions and may not be fully accessible
[  198.916591] ata3.00: supports DRM functions and may not be fully accessible
[  198.919450] ata3.00: configured for UDMA/133
[  198.919470] sd 2:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  198.919472] sd 2:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
[  198.919474] sd 2:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
[  198.919477] sd 2:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 0a 80 13 e0 00 00 08 00
[  198.919478] print_req_error: I/O error, dev sda, sector 176165856
[  198.919491] sd 2:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  198.919493] sd 2:0:0:0: [sda] tag#8 Sense Key : Illegal Request [current] 
[  198.919495] sd 2:0:0:0: [sda] tag#8 Add. Sense: Unaligned write command
[  198.919497] sd 2:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 0a 80 13 e8 00 00 08 00
[  198.919498] print_req_error: I/O error, dev sda, sector 176165864
[  198.919502] sd 2:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  198.919504] sd 2:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current] 
[  198.919505] sd 2:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
[  198.919507] sd 2:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 0a 80 13 f0 00 00 08 00
[  198.919507] print_req_error: I/O error, dev sda, sector 176165872
[  198.919516] sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  198.919517] sd 2:0:0:0: [sda] tag#11 Sense Key : Illegal Request [current] 
[  198.919519] sd 2:0:0:0: [sda] tag#11 Add. Sense: Unaligned write command
[  198.919520] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 0a 80 13 f8 00 00 10 00
[  198.919521] print_req_error: I/O error, dev sda, sector 176165880
[  198.919527] ata3: EH complete
[  198.919574] ata3.00: Enabling discard_zeroes_data
[  198.928130] parport_pc 00:05: reported by Plug and Play ACPI
[  198.928205] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[  198.931962] systemd-journald[412]: Received request to flush runtime journal from PID 1
[  199.024101] lp0: using parport0 (interrupt-driven).
[  199.116078] ata3.00: exception Emask 0x50 SAct 0xff0 SErr 0x800 action 0x6 frozen
[  199.116082] ata3.00: irq_stat 0x08000000, interface fatal error
[  199.116084] ata3: SError: { HostInt }
[  199.116087] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116091] ata3.00: cmd 61/18:20:58:2a:10/00:00:00:00:00/40 tag 4 ncq dma 12288 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116093] ata3.00: status: { DRDY }
[  199.116095] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116099] ata3.00: cmd 61/20:28:78:2a:10/00:00:00:00:00/40 tag 5 ncq dma 16384 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116101] ata3.00: status: { DRDY }
[  199.116103] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116107] ata3.00: cmd 61/18:30:a8:2a:10/00:00:00:00:00/40 tag 6 ncq dma 12288 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116108] ata3.00: status: { DRDY }
[  199.116110] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116114] ata3.00: cmd 61/08:38:d0:2a:10/00:00:00:00:00/40 tag 7 ncq dma 4096 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116116] ata3.00: status: { DRDY }
[  199.116117] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116121] ata3.00: cmd 61/30:40:e8:2a:10/00:00:00:00:00/40 tag 8 ncq dma 24576 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116123] ata3.00: status: { DRDY }
[  199.116124] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116128] ata3.00: cmd 61/08:48:38:2b:10/00:00:00:00:00/40 tag 9 ncq dma 4096 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116130] ata3.00: status: { DRDY }
[  199.116131] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116135] ata3.00: cmd 61/08:50:48:2b:10/00:00:00:00:00/40 tag 10 ncq dma 4096 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116137] ata3.00: status: { DRDY }
[  199.116139] ata3.00: failed command: WRITE FPDMA QUEUED
[  199.116142] ata3.00: cmd 61/20:58:58:2b:10/00:00:00:00:00/40 tag 11 ncq dma 16384 out
                        res 40/00:20:58:2a:10/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
[  199.116144] ata3.00: status: { DRDY }
[  199.116148] ata3: hard resetting link
[  199.592070] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  199.592389] ata3.00: supports DRM functions and may not be fully accessible
[  199.595735] ata3.00: supports DRM functions and may not be fully accessible
[  199.598685] ata3.00: configured for UDMA/133
[  199.598698] ata3: EH complete
[  199.598815] ata3.00: Enabling discard_zeroes_data
[  199.643692] audit: type=1400 audit(1541084396.137:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=537 comm="apparmor_parser"
[  199.643695] audit: type=1400 audit(1541084396.137:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=537 comm="apparmor_parser"
[  199.645337] audit: type=1400 audit(1541084396.141:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=543 comm="apparmor_parser"
[  199.645433] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  199.645518] audit: type=1400 audit(1541084396.141:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=540 comm="apparmor_parser"
[  199.645521] audit: type=1400 audit(1541084396.141:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=540 comm="apparmor_parser"
[  199.645523] audit: type=1400 audit(1541084396.141:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=540 comm="apparmor_parser"
[  199.646514] audit: type=1400 audit(1541084396.141:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=544 comm="apparmor_parser"
[  199.648177] audit: type=1400 audit(1541084396.145:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=547 comm="apparmor_parser"
[  199.652462] audit: type=1400 audit(1541084396.149:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=546 comm="apparmor_parser"
[  199.655621] audit: type=1400 audit(1541084396.149:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=545 comm="apparmor_parser"
[  199.771409] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[  199.789873] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[  199.794407] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[  199.794409] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  199.794421] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  199.794422] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  199.794424] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[  199.794425] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  199.794426] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[  199.794428] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[  199.794429] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[  199.794430] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[  199.794431] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[  199.810933] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[  199.810987] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[  199.811028] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[  199.811067] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[  199.811117] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[  199.811163] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[  199.811207] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[  199.999855] kvm: disabled by bios
[  200.044466] MCE: In-kernel MCE decoding enabled.
[  200.050736] kvm: disabled by bios
[  200.060652] EDAC amd64: Node 0: DRAM ECC disabled.
[  200.060654] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[  200.110408] EDAC amd64: Node 0: DRAM ECC disabled.
[  200.110410] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[  200.138133] Adding 4190204k swap on /dev/mapper/mint--vg-swap_1.  Priority:-2 extents:1 across:4190204k SSFS
[  200.427599] usblp 1-6.2:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC511
[  200.429358] usbcore: registered new interface driver usblp
[  200.459982] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  200.500307] r8169 0000:02:00.0 enp2s0: link down
[  200.500347] r8169 0000:02:00.0 enp2s0: link down
[  200.500384] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  202.526411] r8169 0000:02:00.0 enp2s0: link up
[  202.526419] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[  205.509043] usblp2: removed
[  205.515314] usblp 1-6.2:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC511
[  205.928127] ata3.00: exception Emask 0x50 SAct 0x7e00003f SErr 0x800 action 0x6 frozen
[  205.928138] ata3.00: irq_stat 0x08000000, interface fatal error
[  205.928147] ata3: SError: { HostInt }
[  205.928155] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928171] ata3.00: cmd 61/40:00:b8:53:c4/05:00:1c:00:00/40 tag 0 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928179] ata3.00: status: { DRDY }
[  205.928186] ata3.00: failed command: READ FPDMA QUEUED
[  205.928201] ata3.00: cmd 60/08:08:80:10:40/00:00:2c:00:00/40 tag 1 ncq dma 4096 in
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928208] ata3.00: status: { DRDY }
[  205.928214] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928228] ata3.00: cmd 61/40:10:f8:58:c4/05:00:1c:00:00/40 tag 2 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928235] ata3.00: status: { DRDY }
[  205.928241] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928255] ata3.00: cmd 61/40:18:38:5e:c4/05:00:1c:00:00/40 tag 3 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928262] ata3.00: status: { DRDY }
[  205.928268] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928282] ata3.00: cmd 61/40:20:78:63:c4/05:00:1c:00:00/40 tag 4 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928289] ata3.00: status: { DRDY }
[  205.928294] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928309] ata3.00: cmd 61/68:28:b8:68:c4/04:00:1c:00:00/40 tag 5 ncq dma 577536 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928316] ata3.00: status: { DRDY }
[  205.928322] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928337] ata3.00: cmd 61/40:c8:78:39:c4/05:00:1c:00:00/40 tag 25 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928344] ata3.00: status: { DRDY }
[  205.928350] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928364] ata3.00: cmd 61/08:d0:70:20:cf/00:00:1e:00:00/40 tag 26 ncq dma 4096 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928371] ata3.00: status: { DRDY }
[  205.928377] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928391] ata3.00: cmd 61/40:d8:b8:3e:c4/05:00:1c:00:00/40 tag 27 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928398] ata3.00: status: { DRDY }
[  205.928404] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928418] ata3.00: cmd 61/40:e0:f8:43:c4/05:00:1c:00:00/40 tag 28 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928425] ata3.00: status: { DRDY }
[  205.928430] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928445] ata3.00: cmd 61/40:e8:38:49:c4/05:00:1c:00:00/40 tag 29 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928451] ata3.00: status: { DRDY }
[  205.928457] ata3.00: failed command: WRITE FPDMA QUEUED
[  205.928471] ata3.00: cmd 61/40:f0:78:4e:c4/05:00:1c:00:00/40 tag 30 ncq dma 688128 out
                        res 40/00:c8:78:39:c4/00:00:1c:00:00/40 Emask 0x50 (ATA bus error)
[  205.928478] ata3.00: status: { DRDY }
[  205.928486] ata3: hard resetting link
[  206.404139] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  206.404474] ata3.00: supports DRM functions and may not be fully accessible
[  206.408078] ata3.00: supports DRM functions and may not be fully accessible
[  206.411254] ata3.00: configured for UDMA/133
[  206.411295] ata3: EH complete
[  206.411600] ata3.00: Enabling discard_zeroes_data
[  209.680941] ata3: log page 10h reported inactive tag 2
[  209.680963] ata3.00: exception Emask 0x1 SAct 0x3ff8 SErr 0x0 action 0x0
[  209.680969] ata3.00: irq_stat 0x40000008
[  209.680977] ata3.00: failed command: READ FPDMA QUEUED
[  209.680993] ata3.00: cmd 60/08:18:b8:13:40/00:00:26:00:00/40 tag 3 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681000] ata3.00: status: { DRDY }
[  209.681006] ata3.00: failed command: READ FPDMA QUEUED
[  209.681021] ata3.00: cmd 60/08:20:c0:13:40/00:00:26:00:00/40 tag 4 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681028] ata3.00: status: { DRDY }
[  209.681034] ata3.00: failed command: READ FPDMA QUEUED
[  209.681048] ata3.00: cmd 60/08:28:c8:13:40/00:00:26:00:00/40 tag 5 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681055] ata3.00: status: { DRDY }
[  209.681061] ata3.00: failed command: READ FPDMA QUEUED
[  209.681075] ata3.00: cmd 60/08:30:d0:13:40/00:00:26:00:00/40 tag 6 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681082] ata3.00: status: { DRDY }
[  209.681087] ata3.00: failed command: READ FPDMA QUEUED
[  209.681102] ata3.00: cmd 60/08:38:d8:13:40/00:00:26:00:00/40 tag 7 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681108] ata3.00: status: { DRDY }
[  209.681114] ata3.00: failed command: READ FPDMA QUEUED
[  209.681128] ata3.00: cmd 60/08:40:e0:13:40/00:00:26:00:00/40 tag 8 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681135] ata3.00: status: { DRDY }
[  209.681141] ata3.00: failed command: READ FPDMA QUEUED
[  209.681155] ata3.00: cmd 60/08:48:e8:13:40/00:00:26:00:00/40 tag 9 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681162] ata3.00: status: { DRDY }
[  209.681167] ata3.00: failed command: READ FPDMA QUEUED
[  209.681182] ata3.00: cmd 60/08:50:f0:13:40/00:00:26:00:00/40 tag 10 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681189] ata3.00: status: { DRDY }
[  209.681195] ata3.00: failed command: READ FPDMA QUEUED
[  209.681209] ata3.00: cmd 60/08:58:f8:13:40/00:00:26:00:00/40 tag 11 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681216] ata3.00: status: { DRDY }
[  209.681221] ata3.00: failed command: READ FPDMA QUEUED
[  209.681236] ata3.00: cmd 60/08:60:00:14:40/00:00:26:00:00/40 tag 12 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681242] ata3.00: status: { DRDY }
[  209.681248] ata3.00: failed command: READ FPDMA QUEUED
[  209.681262] ata3.00: cmd 60/08:68:08:13:40/00:00:26:00:00/40 tag 13 ncq dma 4096 in
                        res 40/00:68:08:13:40/00:00:26:00:00/40 Emask 0x1 (device error)
[  209.681269] ata3.00: status: { DRDY }
[  209.681602] ata3.00: supports DRM functions and may not be fully accessible
[  209.685046] ata3.00: supports DRM functions and may not be fully accessible
[  209.688146] ata3.00: configured for UDMA/133
[  209.688185] sd 2:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688200] sd 2:0:0:0: [sda] tag#3 Sense Key : Illegal Request [current] 
[  209.688207] sd 2:0:0:0: [sda] tag#3 Add. Sense: Unaligned write command
[  209.688218] sd 2:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 26 40 13 b8 00 00 08 00
[  209.688223] print_req_error: I/O error, dev sda, sector 641733560
[  209.688263] sd 2:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688269] sd 2:0:0:0: [sda] tag#4 Sense Key : Illegal Request [current] 
[  209.688275] sd 2:0:0:0: [sda] tag#4 Add. Sense: Unaligned write command
[  209.688280] sd 2:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 26 40 13 c0 00 00 08 00
[  209.688284] print_req_error: I/O error, dev sda, sector 641733568
[  209.688303] sd 2:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688308] sd 2:0:0:0: [sda] tag#5 Sense Key : Illegal Request [current] 
[  209.688314] sd 2:0:0:0: [sda] tag#5 Add. Sense: Unaligned write command
[  209.688319] sd 2:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 26 40 13 c8 00 00 08 00
[  209.688322] print_req_error: I/O error, dev sda, sector 641733576
[  209.688338] sd 2:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688343] sd 2:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current] 
[  209.688348] sd 2:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
[  209.688353] sd 2:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 26 40 13 d0 00 00 08 00
[  209.688356] print_req_error: I/O error, dev sda, sector 641733584
[  209.688371] sd 2:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688376] sd 2:0:0:0: [sda] tag#7 Sense Key : Illegal Request [current] 
[  209.688381] sd 2:0:0:0: [sda] tag#7 Add. Sense: Unaligned write command
[  209.688386] sd 2:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 26 40 13 d8 00 00 08 00
[  209.688389] print_req_error: I/O error, dev sda, sector 641733592
[  209.688404] sd 2:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688409] sd 2:0:0:0: [sda] tag#8 Sense Key : Illegal Request [current] 
[  209.688414] sd 2:0:0:0: [sda] tag#8 Add. Sense: Unaligned write command
[  209.688419] sd 2:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 26 40 13 e0 00 00 08 00
[  209.688422] print_req_error: I/O error, dev sda, sector 641733600
[  209.688436] sd 2:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688441] sd 2:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current] 
[  209.688447] sd 2:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
[  209.688452] sd 2:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 26 40 13 e8 00 00 08 00
[  209.688455] print_req_error: I/O error, dev sda, sector 641733608
[  209.688469] sd 2:0:0:0: [sda] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688474] sd 2:0:0:0: [sda] tag#10 Sense Key : Illegal Request [current] 
[  209.688480] sd 2:0:0:0: [sda] tag#10 Add. Sense: Unaligned write command
[  209.688485] sd 2:0:0:0: [sda] tag#10 CDB: Read(10) 28 00 26 40 13 f0 00 00 08 00
[  209.688488] print_req_error: I/O error, dev sda, sector 641733616
[  209.688503] sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688508] sd 2:0:0:0: [sda] tag#11 Sense Key : Illegal Request [current] 
[  209.688513] sd 2:0:0:0: [sda] tag#11 Add. Sense: Unaligned write command
[  209.688518] sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 26 40 13 f8 00 00 08 00
[  209.688521] print_req_error: I/O error, dev sda, sector 641733624
[  209.688535] sd 2:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  209.688540] sd 2:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current] 
[  209.688546] sd 2:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[  209.688551] sd 2:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 26 40 14 00 00 00 08 00
[  209.688554] print_req_error: I/O error, dev sda, sector 641733632
[  209.688575] ata3: EH complete
[  209.688761] ata3.00: Enabling discard_zeroes_data
[  212.096110] ata3.00: exception Emask 0x50 SAct 0xe00000 SErr 0x800 action 0x6 frozen
[  212.096121] ata3.00: irq_stat 0x08000000, interface fatal error
[  212.096129] ata3: SError: { HostInt }
[  212.096138] ata3.00: failed command: WRITE FPDMA QUEUED
[  212.096155] ata3.00: cmd 61/18:a8:00:14:00/00:00:27:00:00/40 tag 21 ncq dma 12288 out
                        res 40/00:a8:00:14:00/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[  212.096163] ata3.00: status: { DRDY }
[  212.096169] ata3.00: failed command: READ FPDMA QUEUED
[  212.096184] ata3.00: cmd 60/08:b0:b0:2d:81/00:00:08:00:00/40 tag 22 ncq dma 4096 in
                        res 40/00:a8:00:14:00/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[  212.096191] ata3.00: status: { DRDY }
[  212.096197] ata3.00: failed command: READ FPDMA QUEUED
[  212.096212] ata3.00: cmd 60/08:b8:e8:16:01/00:00:27:00:00/40 tag 23 ncq dma 4096 in
                        res 40/00:a8:00:14:00/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[  212.096218] ata3.00: status: { DRDY }
[  212.096227] ata3: hard resetting link
[  212.572120] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  212.572457] ata3.00: supports DRM functions and may not be fully accessible
[  212.576142] ata3.00: supports DRM functions and may not be fully accessible
[  212.579280] ata3.00: configured for UDMA/133
[  212.579308] ata3: EH complete
[  212.600530] ata3.00: Enabling discard_zeroes_data
[  214.104910] ata3: log page 10h reported inactive tag 7
[  214.104932] ata3.00: exception Emask 0x1 SAct 0x7fffff07 SErr 0x0 action 0x0
[  214.104938] ata3.00: irq_stat 0x40000008
[  214.104946] ata3.00: failed command: READ FPDMA QUEUED
[  214.104963] ata3.00: cmd 60/08:00:f8:27:c0/00:00:20:00:00/40 tag 0 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.104970] ata3.00: status: { DRDY }
[  214.104977] ata3.00: failed command: READ FPDMA QUEUED
[  214.104991] ata3.00: cmd 60/08:08:00:28:c0/00:00:20:00:00/40 tag 1 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.104998] ata3.00: status: { DRDY }
[  214.105004] ata3.00: failed command: READ FPDMA QUEUED
[  214.105019] ata3.00: cmd 60/08:10:08:27:c0/00:00:20:00:00/40 tag 2 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105026] ata3.00: status: { DRDY }
[  214.105032] ata3.00: failed command: READ FPDMA QUEUED
[  214.105046] ata3.00: cmd 60/08:40:40:27:c0/00:00:20:00:00/40 tag 8 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105053] ata3.00: status: { DRDY }
[  214.105058] ata3.00: failed command: READ FPDMA QUEUED
[  214.105073] ata3.00: cmd 60/08:48:48:27:c0/00:00:20:00:00/40 tag 9 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105079] ata3.00: status: { DRDY }
[  214.105085] ata3.00: failed command: READ FPDMA QUEUED
[  214.105100] ata3.00: cmd 60/08:50:50:27:c0/00:00:20:00:00/40 tag 10 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105107] ata3.00: status: { DRDY }
[  214.105113] ata3.00: failed command: READ FPDMA QUEUED
[  214.105127] ata3.00: cmd 60/08:58:58:27:c0/00:00:20:00:00/40 tag 11 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105134] ata3.00: status: { DRDY }
[  214.105139] ata3.00: failed command: READ FPDMA QUEUED
[  214.105154] ata3.00: cmd 60/08:60:60:27:c0/00:00:20:00:00/40 tag 12 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105161] ata3.00: status: { DRDY }
[  214.105166] ata3.00: failed command: READ FPDMA QUEUED
[  214.105180] ata3.00: cmd 60/08:68:68:27:c0/00:00:20:00:00/40 tag 13 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105187] ata3.00: status: { DRDY }
[  214.105193] ata3.00: failed command: READ FPDMA QUEUED
[  214.105207] ata3.00: cmd 60/08:70:70:27:c0/00:00:20:00:00/40 tag 14 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105214] ata3.00: status: { DRDY }
[  214.105219] ata3.00: failed command: READ FPDMA QUEUED
[  214.105233] ata3.00: cmd 60/08:78:78:27:c0/00:00:20:00:00/40 tag 15 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105240] ata3.00: status: { DRDY }
[  214.105246] ata3.00: failed command: READ FPDMA QUEUED
[  214.105260] ata3.00: cmd 60/08:80:80:27:c0/00:00:20:00:00/40 tag 16 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105267] ata3.00: status: { DRDY }
[  214.105272] ata3.00: failed command: READ FPDMA QUEUED
[  214.105286] ata3.00: cmd 60/08:88:88:27:c0/00:00:20:00:00/40 tag 17 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105293] ata3.00: status: { DRDY }
[  214.105299] ata3.00: failed command: READ FPDMA QUEUED
[  214.105313] ata3.00: cmd 60/08:90:90:27:c0/00:00:20:00:00/40 tag 18 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105320] ata3.00: status: { DRDY }
[  214.105325] ata3.00: failed command: READ FPDMA QUEUED
[  214.105339] ata3.00: cmd 60/08:98:98:27:c0/00:00:20:00:00/40 tag 19 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105346] ata3.00: status: { DRDY }
[  214.105352] ata3.00: failed command: READ FPDMA QUEUED
[  214.105366] ata3.00: cmd 60/08:a0:a0:27:c0/00:00:20:00:00/40 tag 20 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105373] ata3.00: status: { DRDY }
[  214.105378] ata3.00: failed command: READ FPDMA QUEUED
[  214.105392] ata3.00: cmd 60/08:a8:a8:27:c0/00:00:20:00:00/40 tag 21 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105399] ata3.00: status: { DRDY }
[  214.105405] ata3.00: failed command: READ FPDMA QUEUED
[  214.105419] ata3.00: cmd 60/08:b0:b0:27:c0/00:00:20:00:00/40 tag 22 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105426] ata3.00: status: { DRDY }
[  214.105431] ata3.00: failed command: READ FPDMA QUEUED
[  214.105445] ata3.00: cmd 60/08:b8:b8:27:c0/00:00:20:00:00/40 tag 23 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105452] ata3.00: status: { DRDY }
[  214.105458] ata3.00: failed command: READ FPDMA QUEUED
[  214.105472] ata3.00: cmd 60/08:c0:c0:27:c0/00:00:20:00:00/40 tag 24 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105479] ata3.00: status: { DRDY }
[  214.105484] ata3.00: failed command: READ FPDMA QUEUED
[  214.105498] ata3.00: cmd 60/08:c8:c8:27:c0/00:00:20:00:00/40 tag 25 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105505] ata3.00: status: { DRDY }
[  214.105511] ata3.00: failed command: READ FPDMA QUEUED
[  214.105525] ata3.00: cmd 60/08:d0:d0:27:c0/00:00:20:00:00/40 tag 26 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105532] ata3.00: status: { DRDY }
[  214.105537] ata3.00: failed command: READ FPDMA QUEUED
[  214.105551] ata3.00: cmd 60/08:d8:d8:27:c0/00:00:20:00:00/40 tag 27 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105558] ata3.00: status: { DRDY }
[  214.105564] ata3.00: failed command: READ FPDMA QUEUED
[  214.105578] ata3.00: cmd 60/08:e0:e0:27:c0/00:00:20:00:00/40 tag 28 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105585] ata3.00: status: { DRDY }
[  214.105590] ata3.00: failed command: READ FPDMA QUEUED
[  214.105604] ata3.00: cmd 60/08:e8:e8:27:c0/00:00:20:00:00/40 tag 29 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105611] ata3.00: status: { DRDY }
[  214.105617] ata3.00: failed command: READ FPDMA QUEUED
[  214.105631] ata3.00: cmd 60/08:f0:f0:27:c0/00:00:20:00:00/40 tag 30 ncq dma 4096 in
                        res 40/00:10:08:27:c0/00:00:20:00:00/40 Emask 0x1 (device error)
[  214.105638] ata3.00: status: { DRDY }
[  214.105969] ata3.00: supports DRM functions and may not be fully accessible
[  214.109482] ata3.00: supports DRM functions and may not be fully accessible
[  214.112522] ata3.00: configured for UDMA/133
[  214.112754] ata3: EH complete
[  214.112964] ata3.00: Enabling discard_zeroes_data
[  215.172908] ata3: limiting SATA link speed to 1.5 Gbps
[  215.172919] ata3.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[  215.172929] ata3.00: irq_stat 0x40000008
[  215.172939] ata3.00: failed command: READ FPDMA QUEUED
[  215.172956] ata3.00: cmd 60/08:d0:00:44:00/00:00:09:00:00/40 tag 26 ncq dma 4096 in
                        res 41/84:08:00:44:00/00:00:09:00:00/00 Emask 0x410 (ATA bus error) <F>
[  215.172964] ata3.00: status: { DRDY ERR }
[  215.172970] ata3.00: error: { ICRC ABRT }
[  215.172979] ata3: hard resetting link
[  215.648137] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  215.648480] ata3.00: supports DRM functions and may not be fully accessible
[  215.652166] ata3.00: supports DRM functions and may not be fully accessible
[  215.655348] ata3.00: configured for UDMA/133
[  215.655406] scsi_io_completion: 25 callbacks suppressed
[  215.655417] sd 2:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  215.655424] sd 2:0:0:0: [sda] tag#26 Sense Key : Aborted Command [current] 
[  215.655432] sd 2:0:0:0: [sda] tag#26 Add. Sense: Scsi parity error
[  215.655439] sd 2:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 09 00 44 00 00 00 08 00
[  215.655442] print_req_error: 25 callbacks suppressed
[  215.655445] print_req_error: I/O error, dev sda, sector 151012352
[  215.655480] ata3: EH complete
[  215.655779] ata3.00: Enabling discard_zeroes_data
[  230.609510] ata3.00: exception Emask 0x0 SAct 0x7ffc7fff SErr 0x0 action 0x6
[  230.609521] ata3.00: irq_stat 0x40000008
[  230.609531] ata3.00: failed command: READ FPDMA QUEUED
[  230.609549] ata3.00: cmd 60/08:b0:80:12:40/00:00:2b:00:00/40 tag 22 ncq dma 4096 in
                        res 41/84:08:80:12:40/00:00:2b:00:00/00 Emask 0x410 (ATA bus error) <F>
[  230.609557] ata3.00: status: { DRDY ERR }
[  230.609562] ata3.00: error: { ICRC ABRT }
[  230.609572] ata3: hard resetting link
[  231.069049] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  231.069392] ata3.00: supports DRM functions and may not be fully accessible
[  231.073082] ata3.00: supports DRM functions and may not be fully accessible
[  231.076285] ata3.00: configured for UDMA/133
[  231.076346] sd 2:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  231.076353] sd 2:0:0:0: [sda] tag#22 Sense Key : Aborted Command [current] 
[  231.076361] sd 2:0:0:0: [sda] tag#22 Add. Sense: Scsi parity error
[  231.076368] sd 2:0:0:0: [sda] tag#22 CDB: Read(10) 28 00 2b 40 12 80 00 00 08 00
[  231.076372] print_req_error: I/O error, dev sda, sector 725619328
[  231.076404] ata3: EH complete
[  231.076637] ata3.00: Enabling discard_zeroes_data
[ 1190.116901] usb 1-6.2: USB disconnect, device number 4
[ 1190.117381] usblp2: removed
[ 1788.782380] ata3.00: exception Emask 0x50 SAct 0x7ffffdff SErr 0x800 action 0x6 frozen
[ 1788.782391] ata3.00: irq_stat 0x08000000, interface fatal error
[ 1788.782400] ata3: SError: { HostInt }
[ 1788.782408] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782424] ata3.00: cmd 61/08:00:c8:1f:80/00:00:27:00:00/40 tag 0 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782432] ata3.00: status: { DRDY }
[ 1788.782439] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782453] ata3.00: cmd 61/08:08:f8:22:80/00:00:27:00:00/40 tag 1 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782461] ata3.00: status: { DRDY }
[ 1788.782466] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782481] ata3.00: cmd 61/08:10:30:23:80/00:00:27:00:00/40 tag 2 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782488] ata3.00: status: { DRDY }
[ 1788.782494] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782508] ata3.00: cmd 61/08:18:48:23:80/00:00:27:00:00/40 tag 3 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782515] ata3.00: status: { DRDY }
[ 1788.782520] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782535] ata3.00: cmd 61/08:20:f8:13:81/00:00:27:00:00/40 tag 4 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782542] ata3.00: status: { DRDY }
[ 1788.782547] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782561] ata3.00: cmd 61/08:28:10:14:81/00:00:27:00:00/40 tag 5 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782568] ata3.00: status: { DRDY }
[ 1788.782574] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782589] ata3.00: cmd 61/08:30:30:14:81/00:00:27:00:00/40 tag 6 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782596] ata3.00: status: { DRDY }
[ 1788.782601] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782616] ata3.00: cmd 61/10:38:c8:14:81/00:00:27:00:00/40 tag 7 ncq dma 8192 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782622] ata3.00: status: { DRDY }
[ 1788.782628] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782642] ata3.00: cmd 61/08:40:08:15:81/00:00:27:00:00/40 tag 8 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782649] ata3.00: status: { DRDY }
[ 1788.782655] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782670] ata3.00: cmd 61/08:50:18:10:c0/00:00:1e:00:00/40 tag 10 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782677] ata3.00: status: { DRDY }
[ 1788.782683] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782697] ata3.00: cmd 61/10:58:08:10:80/00:00:27:00:00/40 tag 11 ncq dma 8192 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782704] ata3.00: status: { DRDY }
[ 1788.782710] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782724] ata3.00: cmd 61/08:60:20:10:80/00:00:27:00:00/40 tag 12 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782731] ata3.00: status: { DRDY }
[ 1788.782736] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782751] ata3.00: cmd 61/08:68:80:10:80/00:00:27:00:00/40 tag 13 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782757] ata3.00: status: { DRDY }
[ 1788.782763] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782777] ata3.00: cmd 61/08:70:58:11:80/00:00:27:00:00/40 tag 14 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782784] ata3.00: status: { DRDY }
[ 1788.782790] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782804] ata3.00: cmd 61/10:78:70:11:80/00:00:27:00:00/40 tag 15 ncq dma 8192 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782811] ata3.00: status: { DRDY }
[ 1788.782816] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782830] ata3.00: cmd 61/08:80:c0:11:80/00:00:27:00:00/40 tag 16 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782837] ata3.00: status: { DRDY }
[ 1788.782843] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782857] ata3.00: cmd 61/28:88:30:14:80/00:00:27:00:00/40 tag 17 ncq dma 20480 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782864] ata3.00: status: { DRDY }
[ 1788.782869] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782884] ata3.00: cmd 61/08:90:70:14:80/00:00:27:00:00/40 tag 18 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782890] ata3.00: status: { DRDY }
[ 1788.782896] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782910] ata3.00: cmd 61/08:98:00:15:80/00:00:27:00:00/40 tag 19 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782917] ata3.00: status: { DRDY }
[ 1788.782923] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782937] ata3.00: cmd 61/08:a0:08:10:00/00:00:00:00:00/40 tag 20 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782943] ata3.00: status: { DRDY }
Top
Bimbo

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

Part 3

Code: Select all

[ 1788.782949] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782963] ata3.00: cmd 61/08:a8:f8:10:00/00:00:00:00:00/40 tag 21 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782970] ata3.00: status: { DRDY }
[ 1788.782975] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.782990] ata3.00: cmd 61/08:b0:48:11:00/00:00:00:00:00/40 tag 22 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.782996] ata3.00: status: { DRDY }
[ 1788.783002] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783016] ata3.00: cmd 61/08:b8:68:11:00/00:00:00:00:00/40 tag 23 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783023] ata3.00: status: { DRDY }
[ 1788.783029] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783043] ata3.00: cmd 61/08:c0:08:10:80/00:00:00:00:00/40 tag 24 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783050] ata3.00: status: { DRDY }
[ 1788.783055] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783069] ata3.00: cmd 61/08:c8:08:10:c0/00:00:00:00:00/40 tag 25 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783076] ata3.00: status: { DRDY }
[ 1788.783082] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783096] ata3.00: cmd 61/08:d0:a8:15:80/00:00:27:00:00/40 tag 26 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783103] ata3.00: status: { DRDY }
[ 1788.783108] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783122] ata3.00: cmd 61/08:d8:c0:15:80/00:00:27:00:00/40 tag 27 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783129] ata3.00: status: { DRDY }
[ 1788.783135] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783149] ata3.00: cmd 61/08:e0:58:1a:80/00:00:27:00:00/40 tag 28 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783156] ata3.00: status: { DRDY }
[ 1788.783161] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783176] ata3.00: cmd 61/10:e8:70:1a:80/00:00:27:00:00/40 tag 29 ncq dma 8192 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783182] ata3.00: status: { DRDY }
[ 1788.783188] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1788.783202] ata3.00: cmd 61/08:f0:d8:1a:80/00:00:27:00:00/40 tag 30 ncq dma 4096 out
                        res 40/00:88:30:14:80/00:00:27:00:00/40 Emask 0x50 (ATA bus error)
[ 1788.783209] ata3.00: status: { DRDY }
[ 1788.783217] ata3: hard resetting link
[ 1789.258374] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1789.258712] ata3.00: supports DRM functions and may not be fully accessible
[ 1789.262270] ata3.00: supports DRM functions and may not be fully accessible
[ 1789.265323] ata3.00: configured for UDMA/133
[ 1789.265358] ata3: EH complete
[ 1789.265624] ata3.00: Enabling discard_zeroes_data
[ 2836.001366] kauditd_printk_skb: 10 callbacks suppressed
[ 2836.001371] audit: type=1400 audit(1541087032.583:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioq3ded" pid=9899 comm="apparmor_parser"
[ 2836.642135] audit: type=1400 audit(1541087033.227:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioquake3" pid=9930 comm="apparmor_parser"
[ 2836.642798] audit: type=1400 audit(1541087033.227:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioquake3//popup" pid=9930 comm="apparmor_parser"
[ 3144.494049] audit: type=1400 audit(1541087341.053:25): apparmor="ALLOWED" operation="connect" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 3144.494383] audit: type=1400 audit(1541087341.053:26): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3144.494390] audit: type=1400 audit(1541087341.053:27): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3144.538364] audit: type=1400 audit(1541087341.097:28): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/index" pid=9973 comm="ioquake3" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 3144.734682] audit: type=1400 audit(1541087341.293:29): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3144.744507] audit: type=1400 audit(1541087341.305:30): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3144.744851] audit: type=1400 audit(1541087341.305:31): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3144.753469] audit: type=1400 audit(1541087341.313:32): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3144.774786] audit: type=1400 audit(1541087341.333:33): apparmor="ALLOWED" operation="mkdir" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/2b/" pid=9973 comm="disk_cache:0" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 3144.775024] audit: type=1400 audit(1541087341.333:34): apparmor="ALLOWED" operation="mknod" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/2b/7a03c58a0982a2e69d1dd73a5f0adcf55e70fe.tmp" pid=9973 comm="disk_cache:0" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 3181.686525] kauditd_printk_skb: 462 callbacks suppressed
[ 3181.686527] audit: type=1400 audit(1541087378.247:497): apparmor="ALLOWED" operation="connect" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 3181.686791] audit: type=1400 audit(1541087378.247:498): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.686795] audit: type=1400 audit(1541087378.247:499): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.700082] audit: type=1400 audit(1541087378.259:500): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/index" pid=9973 comm="ioquake3" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 3181.904324] audit: type=1400 audit(1541087378.463:501): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/2b/7a03c58a0982a2e69d1dd73a5f0adcf55e70fe" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.904809] audit: type=1400 audit(1541087378.463:502): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/c2/bbfac0f05751ec19070dd3bf15e99b4b294c49" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.905204] audit: type=1400 audit(1541087378.463:503): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/b2/c8117ba31d63363f6295363366ca0a3d65a740" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.905606] audit: type=1400 audit(1541087378.463:504): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/a3/8a23522cf8d3aa07cb829200be34c9c17ae531" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.906056] audit: type=1400 audit(1541087378.463:505): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/07/37573aeaf6221e24590590d0eb3d487408b129" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3181.906306] audit: type=1400 audit(1541087378.463:506): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/58/031a63d9e9b8944b53324f53ab4da853eaf4e7" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3214.579904] kauditd_printk_skb: 74 callbacks suppressed
[ 3214.579909] audit: type=1400 audit(1541087411.136:581): apparmor="ALLOWED" operation="connect" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 3214.581995] audit: type=1400 audit(1541087411.136:582): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3214.582005] audit: type=1400 audit(1541087411.136:583): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=9973 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3214.588818] audit: type=1400 audit(1541087411.148:584): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/index" pid=9973 comm="ioquake3" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 3214.792920] audit: type=1400 audit(1541087411.352:585): apparmor="ALLOWED" operation="mkdir" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/" pid=9973 comm="disk_cache:0" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 3214.793143] audit: type=1400 audit(1541087411.352:586): apparmor="ALLOWED" operation="mknod" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/605ac1ac81d264f77a1fe3b2185e72f9c85258.tmp" pid=9973 comm="disk_cache:0" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 3214.793235] audit: type=1400 audit(1541087411.352:587): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/605ac1ac81d264f77a1fe3b2185e72f9c85258.tmp" pid=9973 comm="disk_cache:0" requested_mask="wc" denied_mask="wc" fsuid=1000 ouid=1000
[ 3214.793306] audit: type=1400 audit(1541087411.352:588): apparmor="ALLOWED" operation="file_lock" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/605ac1ac81d264f77a1fe3b2185e72f9c85258.tmp" pid=9973 comm="disk_cache:0" requested_mask="wk" denied_mask="wk" fsuid=1000 ouid=1000
[ 3214.794505] audit: type=1400 audit(1541087411.352:589): apparmor="ALLOWED" operation="rename_src" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/605ac1ac81d264f77a1fe3b2185e72f9c85258.tmp" pid=9973 comm="disk_cache:0" requested_mask="wrd" denied_mask="wrd" fsuid=1000 ouid=1000
[ 3214.794508] audit: type=1400 audit(1541087411.352:590): apparmor="ALLOWED" operation="rename_dest" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/e9/605ac1ac81d264f77a1fe3b2185e72f9c85258" pid=9973 comm="disk_cache:0" requested_mask="wc" denied_mask="wc" fsuid=1000 ouid=1000
[ 3303.431248] kauditd_printk_skb: 439 callbacks suppressed
[ 3303.431250] audit: type=1400 audit(1541087499.982:1030): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak0.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431254] audit: type=1400 audit(1541087499.982:1031): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak1-maps.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431274] audit: type=1400 audit(1541087499.982:1032): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak2-players-mature.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431291] audit: type=1400 audit(1541087499.982:1033): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak2-players.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431308] audit: type=1400 audit(1541087499.982:1034): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak4-textures.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431326] audit: type=1400 audit(1541087499.982:1035): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak5-TA.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431342] audit: type=1400 audit(1541087499.982:1036): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak6-misc.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431359] audit: type=1400 audit(1541087499.982:1037): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak6-patch085.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.431375] audit: type=1400 audit(1541087499.982:1038): apparmor="ALLOWED" operation="file_inherit" profile="/usr/lib/ioquake3/ioquake3//popup" name="/usr/share/games/openarena/baseoa/pak6-patch088.pk3" pid=10015 comm="zenity" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3303.484585] audit: type=1400 audit(1541087500.034:1039): apparmor="ALLOWED" operation="connect" profile="/usr/lib/ioquake3/ioquake3//popup" pid=10015 comm="zenity" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@/tmp/dbus-7JDLC6pDgC" peer="unconfined"
[ 3312.879283] kauditd_printk_skb: 5 callbacks suppressed
[ 3312.879286] audit: type=1400 audit(1541087509.425:1045): apparmor="ALLOWED" operation="connect" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=10013 comm="ioquake3" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[ 3312.879490] audit: type=1400 audit(1541087509.425:1046): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3312.879498] audit: type=1400 audit(1541087509.429:1047): apparmor="ALLOWED" operation="file_perm" profile="/usr/lib/ioquake3/ioquake3" name="/run/user/1000/bus" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3312.924567] audit: type=1400 audit(1541087509.473:1048): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/index" pid=10013 comm="ioquake3" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 3313.128973] audit: type=1400 audit(1541087509.677:1049): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3313.138327] audit: type=1400 audit(1541087509.685:1050): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3313.138690] audit: type=1400 audit(1541087509.685:1051): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3313.147535] audit: type=1400 audit(1541087509.697:1052): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/sys/devices/virtual/sound/seq/uevent" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 3313.158414] audit: type=1400 audit(1541087509.705:1053): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/2b/7a03c58a0982a2e69d1dd73a5f0adcf55e70fe" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 3313.158708] audit: type=1400 audit(1541087509.705:1054): apparmor="ALLOWED" operation="open" profile="/usr/lib/ioquake3/ioquake3" name="/home/whitmore/.cache/mesa_shader_cache/c2/bbfac0f05751ec19070dd3bf15e99b4b294c49" pid=10013 comm="ioquake3" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 4739.248615] usb 1-6.3: new high-speed USB device number 5 using ehci-pci
[ 4739.517749] usb 1-6.3: New USB device found, idVendor=04b0, idProduct=0601
[ 4739.517758] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4739.517763] usb 1-6.3: Product: NIKON DSC 1 V1
[ 4739.517767] usb 1-6.3: Manufacturer: NIKON
[ 4739.517770] usb 1-6.3: SerialNumber: 00000000000000000000000061047224
[ 9626.927027] usb 2-4: new high-speed USB device number 4 using ehci-pci
[ 9627.084032] usb 2-4: New USB device found, idVendor=152d, idProduct=2338
[ 9627.084040] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 9627.084045] usb 2-4: Product: USB to ATA/ATAPI bridge
[ 9627.084048] usb 2-4: Manufacturer: JMicron
[ 9627.084052] usb 2-4: SerialNumber: 11418EACB654
[ 9627.123948] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 9627.124382] scsi host6: usb-storage 2-4:1.0
[ 9627.124524] usbcore: registered new interface driver usb-storage
[ 9627.131044] usbcore: registered new interface driver uas
[ 9628.136048] scsi 6:0:0:0: Direct-Access     Samsung  SSD 840 Series        PQ: 0 ANSI: 2 CCS
[ 9628.136816] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 9628.137766] sd 6:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 9628.138766] sd 6:0:0:0: [sde] Write Protect is off
[ 9628.138774] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[ 9628.139886] sd 6:0:0:0: [sde] No Caching mode page found
[ 9628.139899] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 9628.170334]  sde: sde1
[ 9628.174250] sd 6:0:0:0: [sde] Attached SCSI disk
[10849.306667] PM: suspend entry (deep)
[10849.306670] PM: Syncing filesystems ... done.
[10849.569905] Freezing user space processes ... (elapsed 0.004 seconds) done.
[10849.573971] OOM killer disabled.
[10849.573972] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10849.575173] Suspending console(s) (use no_console_suspend to debug)
[10849.575770] parport_pc 00:05: disabled
[10849.575830] serial 00:04: disabled
[10849.601945] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[10849.601982] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
[10849.601999] sd 5:0:0:0: [sdd] Synchronizing SCSI cache
[10849.602208] sd 4:0:0:0: [sdc] Stopping disk
[10849.602239] sd 3:0:0:0: [sdb] Stopping disk
[10849.602491] sd 5:0:0:0: [sdd] Stopping disk
[10849.605928] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10849.606002] sd 2:0:0:0: [sda] Stopping disk
[10850.322556] ACPI: Preparing to enter system sleep state S3
[10850.322790] PM: Saving platform NVS memory
[10850.322802] Disabling non-boot CPUs ...
[10850.339321] smpboot: CPU 1 is now offline
[10850.359265] smpboot: CPU 2 is now offline
[10850.383312] smpboot: CPU 3 is now offline
[10850.385510] ACPI: Low-level resume complete
[10850.385541] PM: Restoring platform NVS memory
[10850.385597] LVT offset 1 assigned for vector 0x400
[10850.385604] IBS: LVT offset 1 assigned
[10850.385925] microcode: CPU0: new patch_level=0x010000dc
[10850.385930] Enabling non-boot CPUs ...
[10850.385965] x86: Booting SMP configuration:
[10850.385966] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10850.386527] Initializing CPU#1
[10850.388563] process: Switch to broadcast mode on CPU1
[10850.388694]  cache: parent cpu1 should not be sleeping
[10850.388775] microcode: CPU1: patch_level=0x010000dc
[10850.388880] CPU1 is up
[10850.388904] smpboot: Booting Node 0 Processor 2 APIC 0x2
[10850.389477] Initializing CPU#2
[10850.391515] process: Switch to broadcast mode on CPU2
[10850.391639]  cache: parent cpu2 should not be sleeping
[10850.391721] microcode: CPU2: patch_level=0x010000dc
[10850.391833] CPU2 is up
[10850.391858] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10850.392432] Initializing CPU#3
[10850.394470] process: Switch to broadcast mode on CPU3
[10850.394594]  cache: parent cpu3 should not be sleeping
[10850.394674] microcode: CPU3: patch_level=0x010000dc
[10850.394800] CPU3 is up
[10850.399284] ACPI: Waking up from system sleep state S3
[10850.399558] ahci 0000:00:11.0: set SATA to AHCI mode
[10850.417393] rtc_cmos 00:02: Alarms can be up to one month in the future
[10850.417737] serial 00:04: activated
[10850.418013] parport_pc 00:05: activated
[10850.440542] usb usb7: root hub lost power or was reset
[10850.440543] usb usb3: root hub lost power or was reset
[10850.440545] usb usb6: root hub lost power or was reset
[10850.444869] usb usb4: root hub lost power or was reset
[10850.444870] usb usb5: root hub lost power or was reset
[10850.445093] sd 2:0:0:0: [sda] Starting disk
[10850.445137] sd 3:0:0:0: [sdb] Starting disk
[10850.445144] sd 4:0:0:0: [sdc] Starting disk
[10850.445193] sd 5:0:0:0: [sdd] Starting disk
[10850.478722] r8169 0000:02:00.0 enp2s0: link down
[10850.480478] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[10850.487326] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[10850.487402] radeon 0000:01:00.0: WB enabled
[10850.487404] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000f46c0
[10850.487406] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x15718d5d
[10850.488863] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x49e7a84f
[10850.504961] [drm] ring test on 0 succeeded in 1 usecs
[10850.504966] [drm] ring test on 3 succeeded in 2 usecs
[10850.612600] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[10850.612602] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[10850.652629] ata2.00: configured for UDMA/100
[10850.690683] [drm] ring test on 5 succeeded in 1 usecs
[10850.690696] [drm] UVD initialized successfully.
[10850.690745] [drm] ib test on ring 0 succeeded in 0 usecs
[10850.690795] [drm] ib test on ring 3 succeeded in 0 usecs
[10850.860628] [drm] ib test on ring 5 succeeded
[10850.872313] usb 6-2: reset full-speed USB device number 2 using ohci-pci
[10850.896301] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[10850.896620] ata3.00: supports DRM functions and may not be fully accessible
[10850.899977] ata3.00: supports DRM functions and may not be fully accessible
[10850.902867] ata3.00: configured for UDMA/133
[10850.902913] ata3.00: Enabling discard_zeroes_data
[10851.012309] firewire_core 0000:03:0e.0: rediscovered device fw0
[10851.044308] usb 4-2: reset low-speed USB device number 2 using ohci-pci
[10851.212345] usb 6-3: reset full-speed USB device number 3 using ohci-pci
[10852.568077] r8169 0000:02:00.0 enp2s0: link up

[10853.604506] floppy driver state
[10853.604507] -------------------
[10853.604513] now=2638272 last interrupt=4294941845 diff=2663723 last called handler=recal_interrupt [floppy]
[10853.604513] timeout_message=lock fdc
[10853.604513] last output bytes:
[10853.604514] c1 90 4294941489
[10853.604515] 10 90 4294941489
[10853.604516]  7 80 4294941489
[10853.604516]  0 90 4294941489
[10853.604517]  8 81 4294941570
[10853.604518]  3 80 4294941576
[10853.604518] d1 90 4294941576
[10853.604519]  a 90 4294941576
[10853.604519]  7 80 4294941576
[10853.604520]  0 90 4294941576
[10853.604520]  8 81 4294941677
[10853.604521]  3 80 4294941683
[10853.604521] c1 90 4294941683
[10853.604522] 10 90 4294941683
[10853.604522]  7 80 4294941683
[10853.604523]  0 90 4294941683
[10853.604523]  8 81 4294941764
[10853.604524]  7 80 4294941764
[10853.604524]  0 90 4294941764
[10853.604525]  8 81 4294941845
[10853.604525] last result at 4294941845
[10853.604526] last redo_fd_request at 4294941845
[10853.604527] 70 00                                            p.
[10853.604534] status=10
[10853.604534] fdc_busy=1
[10853.604537] do_floppy=reset_interrupt [floppy]
[10853.604538] cont=6c53878d
[10853.604538] current_req=  (null)
[10853.604539] command_status=-1

[10853.604542] floppy0: floppy timeout called
[10853.604806] OOM killer enabled.
[10853.604807] Restarting tasks ... done.
[10853.606413] PM: suspend exit
[10856.616771] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10856.649571] ata4.00: configured for UDMA/133
[10856.736794] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10856.768768] ata6.00: configured for UDMA/133
[10858.932961] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10858.935112] ata5.00: configured for UDMA/133
[10859.105337] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[10859.149020] r8169 0000:02:00.0 enp2s0: link down
[10859.149109] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[10859.152934] r8169 0000:02:00.0 enp2s0: link down
[10861.885551] r8169 0000:02:00.0 enp2s0: link up
[10861.885572] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[12467.013505] kauditd_printk_skb: 78 callbacks suppressed
[12467.013510] audit: type=1400 audit(1541111575.029:1133): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/whitmore/.cache/mesa_shader_cache/index" pid=17353 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[12469.504207] audit: type=1400 audit(1541111577.517:1134): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/whitmore/.mozilla/firefox/o8i1mgbt.default/cert8.db" pid=17352 comm="soffice.bin" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[12469.505044] audit: type=1400 audit(1541111577.521:1135): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/whitmore/.mozilla/firefox/o8i1mgbt.default/key3.db" pid=17352 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[/code]
Top
User avatar
smurphos
Level 18
Level 18
Posts: 8498
Joined: Fri Sep 05, 2014 12:18 am
Location: Irish Brit in Portugal
Contact:
Contact smurphos

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by smurphos »

Please report back the output of cat /etc/fstab & blkid.

But assuming your machine doesn't have a floppy disc drive - go into your BIOS settings and see if their is an option to disable the floppy drive.
For custom Nemo actions, useful scripts for the Cinnamon desktop, and Cinnamox themes visit my Github pages.
Top
Bimbo

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Bimbo »

Code: Select all

whitmore@Frankie:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/mint--vg-root /               ext4    errors=remount-ro 0       1
/dev/mapper/mint--vg-swap_1 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
whitmore@Frankie:~$ blkid
/dev/sda1: UUID="LNYzdC-Rgfr-EkXA-aOw6-rM7U-0HXJ-dZEGAB" TYPE="LVM2_member" PARTUUID="d99692e2-01"
/dev/sdc1: LABEL="Whitmore" UUID="B67E1EF27E1EAB5F" TYPE="ntfs" PARTUUID="b88a6351-01"
/dev/sdc2: LABEL="2" UUID="E43C428F3C425CA4" TYPE="ntfs" PARTUUID="b88a6351-02"
/dev/sdc3: LABEL="3" UUID="96C059EFC059D5D9" TYPE="ntfs" PARTUUID="b88a6351-03"
/dev/sdc5: LABEL="4" UUID="A24A98964A9868B5" TYPE="ntfs" PARTUUID="b88a6351-05"
/dev/sdb1: LABEL="Recorded TV" UUID="ACDC1680DC16454C" TYPE="ntfs" PARTUUID="cda639ce-01"
/dev/sdb2: LABEL="New Volume" UUID="ECC44F07C44ED40C" TYPE="ntfs" PARTUUID="cda639ce-02"
/dev/sdd1: LABEL="Video" UUID="D6FC4856FC483353" TYPE="ntfs" PARTUUID="7430d4ae-01"
/dev/sdd2: LABEL="Audio" UUID="AE84BC8084BC4D19" TYPE="ntfs" PARTUUID="7430d4ae-02"
/dev/mapper/mint--vg-root: UUID="d0692ea8-6a1c-4a15-9c73-c9f9f49944f5" TYPE="ext4"
/dev/sde1: UUID="4BB0EFD83B5E2F9B" TYPE="ntfs" PARTUUID="00002c41-01"
whitmore@Frankie:~$
Top
Sugarcrisp
Level 3
Level 3
Posts: 170
Joined: Sat Mar 31, 2018 6:58 am

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by Sugarcrisp »

Hello Bimbo! I just went through this myself for the past couple of days. I came across the following that solved it for me. Hopefully it will work for you also.

I followed the steps on https://www.linuxuprising.com/2018/08/h ... -swap.html to switch from a swap drive to a swap file. This has corrected the issue. My start time went from 2min 40sec to 35sec.
Top
User avatar
smurphos
Level 18
Level 18
Posts: 8498
Joined: Fri Sep 05, 2014 12:18 am
Location: Irish Brit in Portugal
Contact:
Contact smurphos

Re: Fresh install of Cinnamon 19 on new SSD Very slow to boot

Post by smurphos »

Oops - apologies for missing your reply Bimbo. :oops:
For custom Nemo actions, useful scripts for the Cinnamon desktop, and Cinnamox themes visit my Github pages.
Top
Locked

Return to “Installation & Boot”