I have an HP Z400 Workstation running Linux Mint 18.3 dual booted with Windows 7. When LM 19 was first released I tried the upgrade route from 18.3 to 19 but this failed, so I downloaded the iso and burned the image to a DVD but this failed immediately after the first splash screen returning a terminal error "Kernel panic - not syncing: Attempted to kill init". I've burned three discs using different software and also downloaded the v2 iso but all fail in the same way. I've tried all the options given in the release notes, Compatibility Mode, nomodeset etc, but none of these work either.
I re-installed 18.3 and have been looking for a solution for this ever since without success.
The issue appears to be with Ubuntu 18.04 as this also fails in the same way.
HOWEVER, Both Ubuntu 18.04 and LM19 can be installed and work in VirtualBox from the same installation discs.
The error message spans two screens and the first one is too fast to read but I video'd it on my phone and managed to get it.
The output of inxi -Fxxz is included below.
Code: Select all
System: Host: Z400 Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0) Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3) dm: lightdm Distro: Linux Mint 18.3 Sylvia Machine: System: Hewlett-Packard product: HP Z400 Workstation Mobo: Hewlett-Packard model: 0B4Ch v: D Bios: Hewlett-Packard v: 786G3 v03.20 date: 06/10/2011 Chassis: type: 6 CPU: Quad core Intel Xeon W3550 (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 24534 clock speeds: min/max: 1596/3060 MHz 1: 1596 MHz 2: 1596 MHz 3: 1729 MHz 4: 1596 MHz Graphics: Card: NVIDIA G94GL [Quadro FX 1800] bus-ID: 0f:00.0 chip-ID: 10de:0638 Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa) Resolution: firstname.lastname@example.org GLX Renderer: NV94 GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes Audio: Card Intel 82801JI (ICH10 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:3a3e Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic Network: Card: Broadcom NetXtreme BCM5764M Gigabit Ethernet PCIe driver: tg3 v: 3.137 bus-ID: 01:00.0 chip-ID: 14e4:1684 IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter> Drives: HDD Total Size: 2000.4GB (6.7% used) ID-1: /dev/sda model: Hitachi_HUA72302 size: 2000.4GB serial: YFGEXU1A Partition: ID-1: / size: 23G used: 9.9G (46%) fs: ext4 dev: /dev/sda6 ID-2: /home size: 917G used: 111G (13%) fs: ext4 dev: /dev/sda7 ID-3: swap-1 size: 4.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 RAID: System: supported: N/A No RAID devices: /proc/mdstat, md_mod kernel module present Unused Devices: none Sensors: System Temperatures: cpu: 40.0C mobo: N/A gpu: 41.0 Fan Speeds (in rpm): cpu: N/A Info: Processes: 242 Uptime: 31 min Memory: 2026.2/16027.6MB Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0 Client: Shell (bash 4.3.481 running in gnome-terminal-) inxi: 2.2.35
I hope someone can help. I may not be able to respond immediately to any requests for further information or actions so please bear with me.