Mint 19.1 Slow boot up

[xonq]

Same problem as described here. Happens w/either nvidia or intel graphics selected.

Specs:

Code: Select all

System:
  Host: xonq Kernel: 4.15.0-47-generic x86_64 bits: 64 compiler: gcc 
  v: 7.3.0 Desktop: Xfce 4.12.3 Distro: Linux Mint 19.1 Tessa 
  base: Ubuntu 18.04 bionic 
Machine:
  Type: Laptop System: Dell product: G3 3579 v: N/A serial: <filter> 
  Mobo: Dell model: 05K0D2 v: A00 serial: <filter> UEFI: Dell v: 1.5.1 
  date: 11/01/2018 
Battery:
  ID-1: BAT0 charge: 15.2 Wh condition: 44.5/56.0 Wh (79%) 
  model: Samsung SDI DELL W7NKD84 status: Discharging 
CPU:
  Topology: Quad Core model: Intel Core i5-8300H bits: 64 type: MT MCP 
  arch: Kaby Lake rev: A L2 cache: 8192 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 36864 
  Speed: 800 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 800 2: 800 
  3: 801 4: 800 5: 800 6: 802 7: 800 8: 800 
Graphics:
  Device-1: Intel vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
  Device-2: NVIDIA GP107M [GeForce GTX 1050 Mobile] driver: N/A 
  bus ID: 01:00.0 
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1920x1080~60Hz 
  OpenGL: renderer: Mesa DRI Intel UHD Graphics 630 (Coffeelake 3x8 GT2) 
  v: 4.5 Mesa 18.2.8 direct render: Yes 
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel 
  v: kernel bus ID: 00:1f.3 
  Sound Server: ALSA v: k4.15.0-47-generic 
Network:
  Device-1: Intel Wireless-AC 9560 [Jefferson Peak] driver: iwlwifi 
  v: kernel port: 5000 bus ID: 00:14.3 
  IF: wlo1 state: up mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Dell driver: r8169 v: 2.3LK-NAPI port: 3000 bus ID: 02:00.0 
  IF: enp2s0 state: down mac: <filter> 
Drives:
  Local Storage: total: 238.47 GiB used: 18.14 GiB (7.6%) 
  ID-1: /dev/sda vendor: Micron model: 1100 SATA 256GB size: 238.47 GiB 
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci 
  v: 3.0 bus ID: 00:17.0 
Partition:
  ID-1: / size: 96.58 GiB used: 9.03 GiB (9.4%) fs: ext4 dev: /dev/sda5 
  ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-0 
Sensors:
  System Temperatures: cpu: 50.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 240 Uptime: 20m Memory: 7.65 GiB used: 860.1 MiB (11.0%) 
  Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19 
  inxi: 3.0.27 

analyzer:

Code: Select all

Startup finished in 6.941s (firmware) + 2.791s (loader) + 35.605s (kernel) + 2.270s (userspace) = 47.608s
graphical.target reached after 2.262s in userspace

top 4 processes hanging:

Code: Select all

600ms systemd-cryptsetup@cryptswap1.service
           515ms dev-sda5.device
           428ms systemd-logind.service
           404ms console-setup.service

[deepakdeshp]

One solution
https://askubuntu.com/questions/1030867 ... untu-18-04

[kevin987]

One solution
https://askubuntu.com/questions/1030867 ... untu-18-04

The solution at the bottom of the page helped me.

Code: Select all

sudo gedit /etc/systemd/system.conf

Change/or Add a Different line that's Uncommented (from 90 seconds to 5 and Uncomment

#DefaultTimeoutStartSec=90s

DefaultTimeoutStartSec=5s

and the other

#DefaultTimeoutStopSec=90s

DefaultTimeoutStopSec=5s

Code: Select all

sudo update-initramfs -u

[deepakdeshp]

Good to know. Please mark it solved

[Moem]

Good to know. Please mark it solved

That's for the OP to do, not for a different member who added their solution.

[deepakdeshp]

Good to know. Please mark it solved

That's for the OP to do, not for a different member who added their solution.

Some don't know that it's the convention and need to be prompted

[Moem]

Some don't know that it's the convention and need to be prompted

Sure, but you prompted the wrong person.