Problems with mint 19.2 after installation

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help
rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Problems with mint 19.2 after installation

Post by rlblr » Thu Oct 17, 2019 8:33 pm

Firstly, the english isn't my native language, so errors can be appear. I will try resume the problem.
The problem: I can not use the linux mint 19.2 (and others) after install.

This is what appears after first boot:
Image
Then I press Ctrl+alt+F2 to reboot
Image
And next this screen appear:
Image
Then I follow the instruction: run fsck manually
Image
And the problem is't resolved, no worked.

The configuration of my notebook (using Legacy BIOS):

Code: Select all

mint@mint:~$ inxi -Fxzd 
System:
  Host: mint Kernel: 4.15.0-54-generic x86_64 bits: 64 compiler: gcc 
  v: 7.4.0 Desktop: Cinnamon 4.2.3 Distro: Linux Mint 19.2 Tina 
  base: Ubuntu 18.04 bionic 
Machine:
  Type: Laptop System: CCE product: Capella & IbexPeak-M Chipset v: N/A 
  serial: <filter> 
  Mobo: CCE model: Calpella CRB serial: <filter> BIOS: Phoenix 
  v: CALPELLACRB.86C.0000.X.0000000000 date: 08/10/2010 
Battery:
  ID-1: BAT0 charge: 33.3 Wh condition: 33.4/48.8 Wh (68%) model: CCE C46GA3 
  status: Unknown 
CPU:
  Topology: Dual Core model: Intel Core i5 M 450 bits: 64 type: MT MCP 
  arch: Nehalem rev: 5 L2 cache: 3072 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19200 
  Speed: 1457 MHz min/max: 1199/2400 MHz Core speeds (MHz): 1: 1432 2: 1432 
  3: 1367 4: 1409 
Graphics:
  Device-1: Intel Core Processor Integrated Graphics driver: i915 v: kernel 
  bus ID: 00:02.0 
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa 
  resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa DRI Intel Ironlake Mobile v: 2.1 Mesa 19.0.2 
  direct render: Yes 
Audio:
  Device-1: Intel 5 Series/3400 Series High Definition Audio 
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  Sound Server: ALSA v: k4.15.0-54-generic 
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 
  v: 2.3LK-NAPI port: 2000 bus ID: 02:00.0 
  IF: enp2s0 state: down mac: <filter> 
  Device-2: Realtek RTL8191SEvA Wireless LAN driver: rtl8192se v: kernel 
  port: 4000 bus ID: 06:00.0 
  IF: wlp6s0 state: up mac: <filter> 
Drives:
  Local Storage: total: 152.78 GiB used: 85.8 MiB (0.1%) 
  ID-1: /dev/sda vendor: Seagate model: ST9160314AS size: 149.05 GiB 
  temp: 37 C 
  ID-2: /dev/sdb type: USB model: General USB Flash Disk size: 3.73 GiB 
  Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7590S rev: 1.02 
  dev-links: cdrom,cdrw,dvd,dvdrw 
  Features: speed: 24 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
Partition:
  ID-1: / size: 2.81 GiB used: 85.8 MiB (3.0%) fs: overlay source: ERR-102 
  ID-2: swap-1 size: 500.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda1 
Sensors:
  System Temperatures: cpu: 54.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 182 Uptime: 2h 19m Memory: 5.62 GiB used: 916.2 MiB (15.9%) 
  Init: systemd runlevel: 5 Compilers: gcc: 7.4.0 Shell: bash v: 4.4.19 
  inxi: 3.0.32 
Note: In bios the SATA is configured to AHCI

By suspect error in disk, I had tested with this hds: samsung HM641JI and seagate ST9160314AS and make tests with tools seatools and estool.
I used too the command for search fails:

Code: Select all

 mkfs.ext4 -cc /dev/device
All the hd tests passed without fail.

The programs I used to record the iso in flash drive: rufus and Universal-USB-Installer (in windows) and the tool of linux mint for record the iso in flash drive "USB image writer". I tested with 3 different flash drive and checked the shasum, too.

I've been trying to install several different distributions and search for the solution. In this forum (in portuguese) http://manjaro-linux.com.br/forum/inici ... t5812.html I tried search help for solve the problem for manjaro xfce install, no sucess. Nobody knowed the problem.

The distributions I have tested :
- linux mint cinnamon 17.2, 17.3, 18.1, 18.3, 19.2
- manjaro xfce 16.10.3, 18.0.1, 18.0.4, manjaro netinstall, manjaro kde 18
- openSUSE-Leap-15 netinstall
All with similar problems after installation.

If someone have something tip for this problem, thank you for your attention.

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Thu Oct 17, 2019 11:04 pm

9-10 year old computer, original drive? Looks to me like the hard drive is failing. Can you boot to a LIVE USB installation flashdrive, and run GParted on it, use that to reformat the partition? Do you have personal data that needs protection, or is it a new install?
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Fri Oct 18, 2019 8:59 pm

It is from the year 2011, but I using windows and works well. Yes, the partition was reformated in both hard drives everytime when I installed. I tried a new install and reformat all the hard drive too.
The tools I tested (seatools and estool) would be accusing the hard drive fail, but it didn't happen. The test result are ok.

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Fri Oct 18, 2019 10:04 pm

The reason I asked about condition of the drive is because fsck showed a lot of errors, and states the file system is corrupt. All I can see is for you to redo the partition the system is on, which means reloading it then. fsck didn't seem to correct everything, or couldn't. I would use GParted to reformat the drive, also it will notice I believe if it's an Advanced Format Drive, such as 4N or 4K drive and make sure the partition starts exactly on a cylinder to avoid problems on such a drive, called "alignment". Or,you could use the Seagate tool to insure that happens.

Information if it applies to your drive.


https://en.wikipedia.org/wiki/Advanced_Format

https://www.seagate.com/tech-insights/a ... master-ti/

When checking in W7
https://support.symantec.com/us/en/arti ... 94586.html

Notice the time frame given at Dell (see bottom of page) when these were popular, using 512b sector emulation on such for the actual 4096b aka 4K type drives. There are some which use emulation, some that are "native", no emulation, and those latter should be partitioned with 4k sectors instead of standard msdos type of

A brief description
https://www.minitool.com/lib/4k-alignment.html

GParted can do this. It's why you should choose the option to start on a megabyte, which should make sure the drive is sure to be aligned properly. Notice in the first video below, do screen freeze to see it better, a comparison between a 4K drive and the older standard 512b type drive. Also notice the date on second video is when it just started in 2010, which is your computer drive era. Also notice the 4K drives start the first partition AFTER the second megabyte.

https://www.youtube.com/watch?v=n5QzhU3BHzc

https://www.youtube.com/watch?v=ij3bR0fRq48

Here's an easy example to see, from my own computer, which I have one of each type drive. You can check yours from LIVE DVD or USB of Mint Linux, using the same command "sudo parted -l" and that's a small L after parted command. Notice the first drive I started my partition ON the second megabyte (1049b, NOT 1048b), not as above video where they did it AFTER the second megabyte. The second drive show, was standard msdos type of 512b,both Logical/Physical, not like the first which is Logical 512, but on Physical 4096 type drive.

Code: Select all

sudo parted -l
Model: ATA WDC WD10EZEX-08W (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags: 

Number  Start   End    Size    Type      File system  Flags
 1      1049kB  105GB  105GB   primary   ext4
 2      105GB   223GB  118GB   primary   ext4
 4      248GB   510GB  262GB   primary   ext4         boot
 3      510GB   566GB  55.8GB  extended
 5      510GB   566GB  55.8GB  logical   ext4


Model: ATA ST9250410AS (scsi)
Disk /dev/sdb: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start   End     Size    Type     File system  Flags
 1      1049kB  17.8MB  16.8MB  primary  fat16
 2      17.8MB  118GB   118GB   primary  ext4
 4      118GB   237GB   118GB   primary  ext4
 3      237GB   250GB   13.2GB  primary  ntfs
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Fri Oct 18, 2019 10:39 pm

According to this site, that drive is physically a 512e type drive. That means 4K with 512 emulation built into it.

https://www.disctech.com/Seagate-Moment ... Hard-Drive


https://downloads.dell.com/Manuals/Comm ... FAQ6-2.PDF
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sat Oct 19, 2019 9:06 pm

I really never knew about this, I simply format using the default everytime. Always learning.
I'm reading the information what you provided and I will try again.
Thanks!

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Sat Oct 19, 2019 11:48 pm

rlblr wrote:
Sat Oct 19, 2019 9:06 pm
I really never knew about this, I simply format using the default everytime. Always learning.
I'm reading the information what you provided and I will try again.
Thanks!
In GParted, make sure all partitions created on that drive have a check in the box for always starting on a megabyte, leave one or two at drive beginning, will probably show as "unallocated space" and that will keep things aligned properly. For instance you could get the first partition aligned, and maybe a second or later offset from start of a megabyte and that partition would then be "unaligned".
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

User avatar
WharfRat
Level 21
Level 21
Posts: 13313
Joined: Thu Apr 07, 2011 8:15 pm

Re: Problems with mint 19.2 after installation

Post by WharfRat » Sun Oct 20, 2019 12:51 am

According to your last screenshot you ran fsck on /dev/sda1 when your third screenshot indicated that /dev/sda2 has errors :?
ImageImage

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Sun Oct 20, 2019 1:50 am

WharfRat wrote:
Sun Oct 20, 2019 12:51 am
According to your last screenshot you ran fsck on /dev/sda1 when your third screenshot indicated that /dev/sda2 has errors :?
What implication then? I think he ran it on the entire drive, and just took a snapshot of the sda2 section when it showed on screen.
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

User avatar
WharfRat
Level 21
Level 21
Posts: 13313
Joined: Thu Apr 07, 2011 8:15 pm

Re: Problems with mint 19.2 after installation

Post by WharfRat » Sun Oct 20, 2019 9:21 am

Spearmint2 wrote:
Sun Oct 20, 2019 1:50 am
WharfRat wrote:
Sun Oct 20, 2019 12:51 am
According to your last screenshot you ran fsck on /dev/sda1 when your third screenshot indicated that /dev/sda2 has errors :?
What implication then? I think he ran it on the entire drive, and just took a snapshot of the sda2 section when it showed on screen.
You're probably correct.

When I saw the errors were reported for sda2 and fsck was run on sda1 I thought perhaps that was the case.

It might help if the OP booted the live media and installed smartmontools to get a look at the results of smartctl.
ImageImage

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sat Oct 26, 2019 3:17 pm

Spearmint2 wrote:
Sun Oct 20, 2019 1:50 am
WharfRat wrote:
Sun Oct 20, 2019 12:51 am
According to your last screenshot you ran fsck on /dev/sda1 when your third screenshot indicated that /dev/sda2 has errors :?
What implication then? I think he ran it on the entire drive, and just took a snapshot of the sda2 section when it showed on screen.
Yes, I used the command for the entire drive.

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sat Oct 26, 2019 3:57 pm

I used firstly the drive seagate ST9160314AS for test. I follow your sugestion and create a new partition with "1mb free space" and "align to" marked to "Mib".

Image

Then I created the others in similar mode.The photo with all partitioning:

Image

I installed the mint 19.2, But the same errors ocurred.

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sat Oct 26, 2019 4:55 pm

Then I used the drive samsung HM641JI for test. I followed the same steps creating the partition in this drive.

Image

Image

The errors was the same.

Image

I remembered I used in 2013 the mint 15, then I installed again. And It worked.

Image

It is a strange problem. Does not work with newer versions of linux.

User avatar
Larry78723
Level 7
Level 7
Posts: 1545
Joined: Wed Jan 09, 2019 7:01 pm
Location: Jasper County, SC, USA

Re: Problems with mint 19.2 after installation

Post by Larry78723 » Sat Oct 26, 2019 5:38 pm

Please provide us with the results of the following command

Code: Select all

sudo parted -l 
That's a small L after the parted command. Let us see the results.
Image

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Sat Oct 26, 2019 11:03 pm

I would reconfirm if ever firstly confirmed, the ISO you downloaded, compare it's md5sum or sha256sum to what it's supposed to be. Likely you got a bad download of the ISO. If that's good, then I'd suspect the drive itself as corrupted.
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sun Oct 27, 2019 7:50 pm

Larry78723 wrote:
Sat Oct 26, 2019 5:38 pm
Please provide us with the results of the following command

Code: Select all

sudo parted -l 
That's a small L after the parted command. Let us see the results.
Here is the results:

Code: Select all

mint@mint:~$ sudo parted -l
Model: ATA SAMSUNG HM641JI (scsi)
Disk /dev/sda: 640GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start   End    Size    Type      File system     Flags
 1      1049kB  100GB  100GB   primary   ext4
 2      100GB   178GB  77.9GB  primary   ntfs            boot
 3      178GB   180GB  2184MB  primary   linux-swap(v1)
 4      180GB   640GB  460GB   extended
 5      180GB   640GB  460GB   logical   ntfs

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sun Oct 27, 2019 8:19 pm

Spearmint2 wrote:
Sat Oct 26, 2019 11:03 pm
I would reconfirm if ever firstly confirmed, the ISO you downloaded, compare it's md5sum or sha256sum to what it's supposed to be. Likely you got a bad download of the ISO. If that's good, then I'd suspect the drive itself as corrupted.

Here I checked the sha256sum of the ISO:

Code: Select all

mint@mint:/media/mint/710EDA14478F6CBD$ sha256sum -b linuxmint-19.2-cinnamon-64bit.iso 
a05a06b79ff12a747a187aa9a87c5ba1f7e0c1814cda714556603901e2001512 *linuxmint-19.2-cinnamon-64bit.iso
with the sha256sum available in site:

Code: Select all

a05a06b79ff12a747a187aa9a87c5ba1f7e0c1814cda714556603901e2001512 *linuxmint-19.2-cinnamon-64bit.iso
I tested with 2 different flash drives. I had too checked the sha256sum after recording:

Code: Select all

mint@mint:/media/mint/Linux Mint 19.2 Cinnamon 64-bit$ md5sum -c MD5SUMS
./.disk/base_installable: OK
./.disk/casper-uuid-generic: OK
./.disk/cd_type: OK
./.disk/info: OK
./.disk/live-uuid-generic: OK
./.disk/release_notes_url: OK
./EFI/BOOT/BOOTx64.EFI: OK
./EFI/BOOT/grubx64.efi: OK
./README.diskdefines: OK
./boot/grub/efi.img: OK
./boot/grub/font.pf2: OK
./boot/grub/grub.cfg: OK
./boot/grub/loopback.cfg: OK
./boot/grub/x86_64-efi/acpi.mod: OK
./boot/grub/x86_64-efi/adler32.mod: OK
./boot/grub/x86_64-efi/ahci.mod: OK
./boot/grub/x86_64-efi/all_video.mod: OK
./boot/grub/x86_64-efi/aout.mod: OK
./boot/grub/x86_64-efi/appleldr.mod: OK
./boot/grub/x86_64-efi/archelp.mod: OK
./boot/grub/x86_64-efi/at_keyboard.mod: OK
./boot/grub/x86_64-efi/ata.mod: OK
./boot/grub/x86_64-efi/backtrace.mod: OK
./boot/grub/x86_64-efi/bfs.mod: OK
./boot/grub/x86_64-efi/bitmap.mod: OK
./boot/grub/x86_64-efi/bitmap_scale.mod: OK
./boot/grub/x86_64-efi/blocklist.mod: OK
./boot/grub/x86_64-efi/boot.mod: OK
./boot/grub/x86_64-efi/bsd.mod: OK
./boot/grub/x86_64-efi/bswap_test.mod: OK
./boot/grub/x86_64-efi/btrfs.mod: OK
./boot/grub/x86_64-efi/bufio.mod: OK
./boot/grub/x86_64-efi/cat.mod: OK
./boot/grub/x86_64-efi/cbfs.mod: OK
./boot/grub/x86_64-efi/cbls.mod: OK
./boot/grub/x86_64-efi/cbmemc.mod: OK
./boot/grub/x86_64-efi/cbtable.mod: OK
./boot/grub/x86_64-efi/cbtime.mod: OK
./boot/grub/x86_64-efi/chain.mod: OK
./boot/grub/x86_64-efi/cmdline_cat_test.mod: OK
./boot/grub/x86_64-efi/cmp.mod: OK
./boot/grub/x86_64-efi/cmp_test.mod: OK
./boot/grub/x86_64-efi/command.lst: OK
./boot/grub/x86_64-efi/cpio.mod: OK
./boot/grub/x86_64-efi/cpio_be.mod: OK
./boot/grub/x86_64-efi/cpuid.mod: OK
./boot/grub/x86_64-efi/crc64.mod: OK
./boot/grub/x86_64-efi/crypto.lst: OK
./boot/grub/x86_64-efi/crypto.mod: OK
./boot/grub/x86_64-efi/cryptodisk.mod: OK
./boot/grub/x86_64-efi/cs5536.mod: OK
./boot/grub/x86_64-efi/ctz_test.mod: OK
./boot/grub/x86_64-efi/date.mod: OK
./boot/grub/x86_64-efi/datehook.mod: OK
./boot/grub/x86_64-efi/datetime.mod: OK
./boot/grub/x86_64-efi/disk.mod: OK
./boot/grub/x86_64-efi/diskfilter.mod: OK
./boot/grub/x86_64-efi/div.mod: OK
./boot/grub/x86_64-efi/div_test.mod: OK
./boot/grub/x86_64-efi/dm_nv.mod: OK
./boot/grub/x86_64-efi/echo.mod: OK
./boot/grub/x86_64-efi/efi_gop.mod: OK
./boot/grub/x86_64-efi/efi_uga.mod: OK
./boot/grub/x86_64-efi/efifwsetup.mod: OK
./boot/grub/x86_64-efi/efinet.mod: OK
./boot/grub/x86_64-efi/ehci.mod: OK
./boot/grub/x86_64-efi/elf.mod: OK
./boot/grub/x86_64-efi/eval.mod: OK
./boot/grub/x86_64-efi/exfat.mod: OK
./boot/grub/x86_64-efi/exfctest.mod: OK
./boot/grub/x86_64-efi/ext2.mod: OK
./boot/grub/x86_64-efi/fat.mod: OK
./boot/grub/x86_64-efi/file.mod: OK
./boot/grub/x86_64-efi/fixvideo.mod: OK
./boot/grub/x86_64-efi/font.mod: OK
./boot/grub/x86_64-efi/fs.lst: OK
./boot/grub/x86_64-efi/gcry_arcfour.mod: OK
./boot/grub/x86_64-efi/gcry_blowfish.mod: OK
./boot/grub/x86_64-efi/gcry_camellia.mod: OK
./boot/grub/x86_64-efi/gcry_cast5.mod: OK
./boot/grub/x86_64-efi/gcry_crc.mod: OK
./boot/grub/x86_64-efi/gcry_des.mod: OK
./boot/grub/x86_64-efi/gcry_dsa.mod: OK
./boot/grub/x86_64-efi/gcry_idea.mod: OK
./boot/grub/x86_64-efi/gcry_md4.mod: OK
./boot/grub/x86_64-efi/gcry_md5.mod: OK
./boot/grub/x86_64-efi/gcry_rfc2268.mod: OK
./boot/grub/x86_64-efi/gcry_rijndael.mod: OK
./boot/grub/x86_64-efi/gcry_rmd160.mod: OK
./boot/grub/x86_64-efi/gcry_rsa.mod: OK
./boot/grub/x86_64-efi/gcry_seed.mod: OK
./boot/grub/x86_64-efi/gcry_serpent.mod: OK
./boot/grub/x86_64-efi/gcry_sha1.mod: OK
./boot/grub/x86_64-efi/gcry_sha256.mod: OK
./boot/grub/x86_64-efi/gcry_sha512.mod: OK
./boot/grub/x86_64-efi/gcry_tiger.mod: OK
./boot/grub/x86_64-efi/gcry_twofish.mod: OK
./boot/grub/x86_64-efi/gcry_whirlpool.mod: OK
./boot/grub/x86_64-efi/geli.mod: OK
./boot/grub/x86_64-efi/gettext.mod: OK
./boot/grub/x86_64-efi/gfxmenu.mod: OK
./boot/grub/x86_64-efi/gfxterm.mod: OK
./boot/grub/x86_64-efi/gfxterm_background.mod: OK
./boot/grub/x86_64-efi/gfxterm_menu.mod: OK
./boot/grub/x86_64-efi/gptsync.mod: OK
./boot/grub/x86_64-efi/grub.cfg: OK
./boot/grub/x86_64-efi/gzio.mod: OK
./boot/grub/x86_64-efi/halt.mod: OK
./boot/grub/x86_64-efi/hashsum.mod: OK
./boot/grub/x86_64-efi/hdparm.mod: OK
./boot/grub/x86_64-efi/help.mod: OK
./boot/grub/x86_64-efi/hexdump.mod: OK
./boot/grub/x86_64-efi/hfs.mod: OK
./boot/grub/x86_64-efi/hfsplus.mod: OK
./boot/grub/x86_64-efi/hfspluscomp.mod: OK
./boot/grub/x86_64-efi/http.mod: OK
./boot/grub/x86_64-efi/iorw.mod: OK
./boot/grub/x86_64-efi/jfs.mod: OK
./boot/grub/x86_64-efi/jpeg.mod: OK
./boot/grub/x86_64-efi/keylayouts.mod: OK
./boot/grub/x86_64-efi/keystatus.mod: OK
./boot/grub/x86_64-efi/ldm.mod: OK
./boot/grub/x86_64-efi/legacy_password_test.mod: OK
./boot/grub/x86_64-efi/legacycfg.mod: OK
./boot/grub/x86_64-efi/linux.mod: OK
./boot/grub/x86_64-efi/linux16.mod: OK
./boot/grub/x86_64-efi/linuxefi.mod: OK
./boot/grub/x86_64-efi/loadbios.mod: OK
./boot/grub/x86_64-efi/loadenv.mod: OK
./boot/grub/x86_64-efi/loopback.mod: OK
./boot/grub/x86_64-efi/ls.mod: OK
./boot/grub/x86_64-efi/lsacpi.mod: OK
./boot/grub/x86_64-efi/lsefi.mod: OK
./boot/grub/x86_64-efi/lsefimmap.mod: OK
./boot/grub/x86_64-efi/lsefisystab.mod: OK
./boot/grub/x86_64-efi/lsmmap.mod: OK
./boot/grub/x86_64-efi/lspci.mod: OK
./boot/grub/x86_64-efi/lssal.mod: OK
./boot/grub/x86_64-efi/luks.mod: OK
./boot/grub/x86_64-efi/lvm.mod: OK
./boot/grub/x86_64-efi/lzopio.mod: OK
./boot/grub/x86_64-efi/macbless.mod: OK
./boot/grub/x86_64-efi/macho.mod: OK
./boot/grub/x86_64-efi/mdraid09.mod: OK
./boot/grub/x86_64-efi/mdraid09_be.mod: OK
./boot/grub/x86_64-efi/mdraid1x.mod: OK
./boot/grub/x86_64-efi/memrw.mod: OK
./boot/grub/x86_64-efi/minicmd.mod: OK
./boot/grub/x86_64-efi/minix2.mod: OK
./boot/grub/x86_64-efi/minix2_be.mod: OK
./boot/grub/x86_64-efi/minix3.mod: OK
./boot/grub/x86_64-efi/minix3_be.mod: OK
./boot/grub/x86_64-efi/minix_be.mod: OK
./boot/grub/x86_64-efi/mmap.mod: OK
./boot/grub/x86_64-efi/moddep.lst: OK
./boot/grub/x86_64-efi/morse.mod: OK
./boot/grub/x86_64-efi/mpi.mod: OK
./boot/grub/x86_64-efi/msdospart.mod: OK
./boot/grub/x86_64-efi/mul_test.mod: OK
./boot/grub/x86_64-efi/multiboot.mod: OK
./boot/grub/x86_64-efi/multiboot2.mod: OK
./boot/grub/x86_64-efi/nativedisk.mod: OK
./boot/grub/x86_64-efi/net.mod: OK
./boot/grub/x86_64-efi/newc.mod: OK
./boot/grub/x86_64-efi/ntfs.mod: OK
./boot/grub/x86_64-efi/ntfscomp.mod: OK
./boot/grub/x86_64-efi/odc.mod: OK
./boot/grub/x86_64-efi/offsetio.mod: OK
./boot/grub/x86_64-efi/ohci.mod: OK
./boot/grub/x86_64-efi/part_acorn.mod: OK
./boot/grub/x86_64-efi/part_amiga.mod: OK
./boot/grub/x86_64-efi/part_apple.mod: OK
./boot/grub/x86_64-efi/part_bsd.mod: OK
./boot/grub/x86_64-efi/part_dfly.mod: OK
./boot/grub/x86_64-efi/part_dvh.mod: OK
./boot/grub/x86_64-efi/part_gpt.mod: OK
./boot/grub/x86_64-efi/part_msdos.mod: OK
./boot/grub/x86_64-efi/part_plan.mod: OK
./boot/grub/x86_64-efi/part_sun.mod: OK
./boot/grub/x86_64-efi/part_sunpc.mod: OK
./boot/grub/x86_64-efi/partmap.lst: OK
./boot/grub/x86_64-efi/parttool.lst: OK
./boot/grub/x86_64-efi/parttool.mod: OK
./boot/grub/x86_64-efi/password.mod: OK
./boot/grub/x86_64-efi/password_pbkdf2.mod: OK
./boot/grub/x86_64-efi/pata.mod: OK
./boot/grub/x86_64-efi/pbkdf2.mod: OK
./boot/grub/x86_64-efi/pbkdf2_test.mod: OK
./boot/grub/x86_64-efi/pcidump.mod: OK
./boot/grub/x86_64-efi/play.mod: OK
./boot/grub/x86_64-efi/png.mod: OK
./boot/grub/x86_64-efi/priority_queue.mod: OK
./boot/grub/x86_64-efi/probe.mod: OK
./boot/grub/x86_64-efi/procfs.mod: OK
./boot/grub/x86_64-efi/progress.mod: OK
./boot/grub/x86_64-efi/raid5rec.mod: OK
./boot/grub/x86_64-efi/raid6rec.mod: OK
./boot/grub/x86_64-efi/random.mod: OK
./boot/grub/x86_64-efi/read.mod: OK
./boot/grub/x86_64-efi/reboot.mod: OK
./boot/grub/x86_64-efi/regexp.mod: OK
./boot/grub/x86_64-efi/reiserfs.mod: OK
./boot/grub/x86_64-efi/relocator.mod: OK
./boot/grub/x86_64-efi/romfs.mod: OK
./boot/grub/x86_64-efi/scsi.mod: OK
./boot/grub/x86_64-efi/serial.mod: OK
./boot/grub/x86_64-efi/setjmp.mod: OK
./boot/grub/x86_64-efi/setjmp_test.mod: OK
./boot/grub/x86_64-efi/setpci.mod: OK
./boot/grub/x86_64-efi/shift_test.mod: OK
./boot/grub/x86_64-efi/signature_test.mod: OK
./boot/grub/x86_64-efi/sleep.mod: OK
./boot/grub/x86_64-efi/sleep_test.mod: OK
./boot/grub/x86_64-efi/spkmodem.mod: OK
./boot/grub/x86_64-efi/squash4.mod: OK
./boot/grub/x86_64-efi/syslinuxcfg.mod: OK
./boot/grub/x86_64-efi/terminal.lst: OK
./boot/grub/x86_64-efi/terminal.mod: OK
./boot/grub/x86_64-efi/terminfo.mod: OK
./boot/grub/x86_64-efi/test.mod: OK
./boot/grub/x86_64-efi/test_blockarg.mod: OK
./boot/grub/x86_64-efi/testload.mod: OK
./boot/grub/x86_64-efi/testspeed.mod: OK
./boot/grub/x86_64-efi/tftp.mod: OK
./boot/grub/x86_64-efi/tga.mod: OK
./boot/grub/x86_64-efi/time.mod: OK
./boot/grub/x86_64-efi/tr.mod: OK
./boot/grub/x86_64-efi/trig.mod: OK
./boot/grub/x86_64-efi/true.mod: OK
./boot/grub/x86_64-efi/udf.mod: OK
./boot/grub/x86_64-efi/ufs1.mod: OK
./boot/grub/x86_64-efi/ufs1_be.mod: OK
./boot/grub/x86_64-efi/ufs2.mod: OK
./boot/grub/x86_64-efi/uhci.mod: OK
./boot/grub/x86_64-efi/usb.mod: OK
./boot/grub/x86_64-efi/usb_keyboard.mod: OK
./boot/grub/x86_64-efi/usbms.mod: OK
./boot/grub/x86_64-efi/usbserial_common.mod: OK
./boot/grub/x86_64-efi/usbserial_ftdi.mod: OK
./boot/grub/x86_64-efi/usbserial_pl2303.mod: OK
./boot/grub/x86_64-efi/usbserial_usbdebug.mod: OK
./boot/grub/x86_64-efi/usbtest.mod: OK
./boot/grub/x86_64-efi/verify.mod: OK
./boot/grub/x86_64-efi/video.lst: OK
./boot/grub/x86_64-efi/video.mod: OK
./boot/grub/x86_64-efi/video_bochs.mod: OK
./boot/grub/x86_64-efi/video_cirrus.mod: OK
./boot/grub/x86_64-efi/video_colors.mod: OK
./boot/grub/x86_64-efi/video_fb.mod: OK
./boot/grub/x86_64-efi/videoinfo.mod: OK
./boot/grub/x86_64-efi/videotest.mod: OK
./boot/grub/x86_64-efi/videotest_checksum.mod: OK
./boot/grub/x86_64-efi/xfs.mod: OK
./boot/grub/x86_64-efi/xnu.mod: OK
./boot/grub/x86_64-efi/xnu_uuid.mod: OK
./boot/grub/x86_64-efi/xnu_uuid_test.mod: OK
./boot/grub/x86_64-efi/xzio.mod: OK
./boot/grub/x86_64-efi/zfscrypt.mod: OK
./casper/filesystem.manifest: OK
./casper/filesystem.manifest-remove: OK
./casper/filesystem.size: OK
./casper/filesystem.squashfs: OK
./casper/initrd.lz: OK
./casper/memtest: OK
./casper/vmlinuz: OK
./dists/bionic/Release: OK
./dists/bionic/contrib/binary-amd64/Packages: OK
./dists/bionic/contrib/binary-amd64/Packages.gz: OK
./dists/bionic/main/binary-amd64/Packages: OK
./dists/bionic/main/binary-amd64/Packages.gz: OK
./dists/bionic/non-free/binary-amd64/Packages: OK
./dists/bionic/non-free/binary-amd64/Packages.gz: OK
./isolinux/16x16.fnt: OK
./isolinux/aa.tr: OK
./isolinux/ab.tr: OK
./isolinux/ace.tr: OK
./isolinux/ady.tr: OK
./isolinux/af.tr: OK
./isolinux/ak.tr: OK
./isolinux/am.tr: OK
./isolinux/an.tr: OK
./isolinux/arn.tr: OK
./isolinux/ary.tr: OK
./isolinux/as.tr: OK
./isolinux/ast.tr: OK
./isolinux/ay.tr: OK
./isolinux/az.tr: OK
./isolinux/ba.tr: OK
./isolinux/back.jpg: OK
./isolinux/be.tr: OK
./isolinux/bem.tr: OK
./isolinux/ber.tr: OK
./isolinux/bg.tr: OK
./isolinux/bho.tr: OK
./isolinux/bootlogo: OK
./isolinux/br.tr: OK
./isolinux/brx.tr: OK
./isolinux/bs.tr: OK
./isolinux/byn.tr: OK
./isolinux/ca.tr: OK
./isolinux/ca@valencia.tr: OK
./isolinux/ce.tr: OK
./isolinux/ceb.tr: OK
./isolinux/chain.c32: OK
./isolinux/chr.tr: OK
./isolinux/ckb.tr: OK
./isolinux/co.tr: OK
./isolinux/crh.tr: OK
./isolinux/cs.tr: OK
./isolinux/csb.tr: OK
./isolinux/cv.tr: OK
./isolinux/cy.tr: OK
./isolinux/da.tr: OK
./isolinux/de.tr: OK
./isolinux/dv.tr: OK
./isolinux/ee.tr: OK
./isolinux/el.tr: OK
./isolinux/en.tr: OK
./isolinux/en_AU.tr: OK
./isolinux/en_CA.tr: OK
./isolinux/en_GB.tr: OK
./isolinux/eo.tr: OK
./isolinux/es.tr: OK
./isolinux/es_CO.tr: OK
./isolinux/et.tr: OK
./isolinux/eu.tr: OK
./isolinux/fa.tr: OK
./isolinux/fa_AF.tr: OK
./isolinux/ff.tr: OK
./isolinux/fi.tr: OK
./isolinux/fil.tr: OK
./isolinux/fo.tr: OK
./isolinux/fr.tr: OK
./isolinux/fr_CA.tr: OK
./isolinux/frp.tr: OK
./isolinux/fur.tr: OK
./isolinux/fy.tr: OK
./isolinux/ga.tr: OK
./isolinux/gd.tr: OK
./isolinux/gl.tr: OK
./isolinux/gn.tr: OK
./isolinux/guc.tr: OK
./isolinux/gv.tr: OK
./isolinux/haw.tr: OK
./isolinux/he.tr: OK
./isolinux/him.tr: OK
./isolinux/hr.tr: OK
./isolinux/hrx.tr: OK
./isolinux/hsb.tr: OK
./isolinux/ht.tr: OK
./isolinux/hu.tr: OK
./isolinux/hy.tr: OK
./isolinux/ia.tr: OK
./isolinux/id.tr: OK
./isolinux/io.tr: OK
./isolinux/is.tr: OK
./isolinux/isolinux.cfg: OK
./isolinux/it.tr: OK
./isolinux/iu.tr: OK
./isolinux/ja.tr: OK
./isolinux/jbo.tr: OK
./isolinux/jv.tr: OK
./isolinux/ka.tr: OK
./isolinux/kab.tr: OK
./isolinux/kbd.tr: OK
./isolinux/kk.tr: OK
./isolinux/kl.tr: OK
./isolinux/kn.tr: OK
./isolinux/ko.tr: OK
./isolinux/ku.tr: OK
./isolinux/kw.tr: OK
./isolinux/ky.tr: OK
./isolinux/la.tr: OK
./isolinux/langlist: OK
./isolinux/lb.tr: OK
./isolinux/ldlinux.c32: OK
./isolinux/lg.tr: OK
./isolinux/li.tr: OK
./isolinux/libcom32.c32: OK
./isolinux/libutil.c32: OK
./isolinux/lld.tr: OK
./isolinux/ln.tr: OK
./isolinux/lo.tr: OK
./isolinux/lt.tr: OK
./isolinux/ltg.tr: OK
./isolinux/luo.tr: OK
./isolinux/lv.tr: OK
./isolinux/mg.tr: OK
./isolinux/mhr.tr: OK
./isolinux/mi.tr: OK
./isolinux/miq.tr: OK
./isolinux/mk.tr: OK
./isolinux/mr.tr: OK
./isolinux/ms.tr: OK
./isolinux/mt.tr: OK
./isolinux/mus.tr: OK
./isolinux/nah.tr: OK
./isolinux/nan.tr: OK
./isolinux/nap.tr: OK
./isolinux/nb.tr: OK
./isolinux/nds.tr: OK
./isolinux/nl.tr: OK
./isolinux/nn.tr: OK
./isolinux/nso.tr: OK
./isolinux/ny.tr: OK
./isolinux/oc.tr: OK
./isolinux/oj.tr: OK
./isolinux/om.tr: OK
./isolinux/or.tr: OK
./isolinux/os.tr: OK
./isolinux/pam.tr: OK
./isolinux/pap.tr: OK
./isolinux/pl.tr: OK
./isolinux/pmy.tr: OK
./isolinux/ps.tr: OK
./isolinux/pt.tr: OK
./isolinux/pt_BR.tr: OK
./isolinux/pt_PT.tr: OK
./isolinux/ro.tr: OK
./isolinux/rom.tr: OK
./isolinux/ru.tr: OK
./isolinux/rw.tr: OK
./isolinux/sa.tr: OK
./isolinux/sc.tr: OK
./isolinux/sco.tr: OK
./isolinux/sd.tr: OK
./isolinux/se.tr: OK
./isolinux/shn.tr: OK
./isolinux/si.tr: OK
./isolinux/sk.tr: OK
./isolinux/sl.tr: OK
./isolinux/sm.tr: OK
./isolinux/sml.tr: OK
./isolinux/sn.tr: OK
./isolinux/so.tr: OK
./isolinux/splash.png: OK
./isolinux/sq.tr: OK
./isolinux/sr.tr: OK
./isolinux/sr@ijekavianlatin.tr: OK
./isolinux/sr@latin.tr: OK
./isolinux/st.tr: OK
./isolinux/su.tr: OK
./isolinux/sv.tr: OK
./isolinux/sw.tr: OK
./isolinux/szl.tr: OK
./isolinux/ta_LK.tr: OK
./isolinux/te.tr: OK
./isolinux/tet.tr: OK
./isolinux/tg.tr: OK
./isolinux/ti.tr: OK
./isolinux/tk.tr: OK
./isolinux/tl.tr: OK
./isolinux/tlh.tr: OK
./isolinux/tr.tr: OK
./isolinux/ts.tr: OK
./isolinux/tt.tr: OK
./isolinux/ty.tr: OK
./isolinux/udm.tr: OK
./isolinux/uk.tr: OK
./isolinux/ur.tr: OK
./isolinux/uz.tr: OK
./isolinux/vec.tr: OK
./isolinux/vesamenu.c32: OK
./isolinux/vi.tr: OK
./isolinux/wae.tr: OK
./isolinux/wo.tr: OK
./isolinux/xh.tr: OK
./isolinux/yi.tr: OK
./isolinux/yo.tr: OK
./isolinux/zh_CN.tr: OK
./isolinux/zh_HK.tr: OK
./isolinux/zh_TW.tr: OK
./isolinux/zu.tr: OK
./isolinux/zza.tr: OK
./pool/contrib/b/b43-fwcutter/b43-fwcutter_1%3a019-3_amd64.deb: OK
./pool/contrib/i/iucode-tool/iucode-tool_2.3.1-1_amd64.deb: OK
./pool/main/b/bcmwl/bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu4_amd64.deb: OK
./pool/main/g/gcc-5/cpp-5_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/gcc-5/gcc-5-base_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/gcc-5/gcc-5_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/gcc-5/libasan2_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/gcc-5/libgcc-5-dev_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/gcc-5/libmpx0_5.5.0-12ubuntu1_amd64.deb: OK
./pool/main/g/glibc/libc-dev-bin_2.27-3ubuntu1_amd64.deb: OK
./pool/main/g/glibc/libc6-dev_2.27-3ubuntu1_amd64.deb: OK
./pool/main/g/grub2-signed/grub-efi-amd64-signed_1.93.14+2.02-2ubuntu8.13_amd64.deb: OK
./pool/main/g/grub2/grub-efi-amd64-bin_2.02-2ubuntu8.13_amd64.deb: OK
./pool/main/g/grub2/grub-efi-amd64_2.02-2ubuntu8.13_amd64.deb: OK
./pool/main/g/grub2/grub-efi_2.02-2ubuntu8.13_amd64.deb: OK
./pool/main/i/isl-0.18/libisl15_0.18-4_amd64.deb: OK
./pool/main/l/linux-wlan-ng/linux-wlan-ng_0.2.9+dfsg-6_amd64.deb: OK
./pool/main/m/mouseemu/mouseemu_0.16-0ubuntu10_amd64.deb: OK
./pool/main/s/setserial/setserial_2.17-50_amd64.deb: OK
./pool/main/s/shim-signed/shim-signed_1.37~18.04.3+15+1533136590.3beb971-0ubuntu1_amd64.deb: OK
./pool/main/s/shim/shim_15+1533136590.3beb971-0ubuntu1_amd64.deb: OK
./pool/main/u/ubiquity/oem-config-gtk_18.04.1+linuxmint15_all.deb: OK
./pool/main/u/ubiquity/oem-config_18.04.1+linuxmint15_all.deb: OK
./pool/main/w/wvdial/wvdial_1.61-4.1build1_amd64.deb: OK
./pool/main/w/wvstreams/libuniconf4.6_4.6.1-11_amd64.deb: OK
./pool/main/w/wvstreams/libwvstreams4.6-base_4.6.1-11_amd64.deb: OK
./pool/main/w/wvstreams/libwvstreams4.6-extras_4.6.1-11_amd64.deb: OK
./pool/non-free/i/intel-microcode/intel-microcode_3.20190618.0ubuntu0.18.04.1_amd64.deb: OK
./preseed/cli.seed: OK
./preseed/linuxmint.seed: OK
md5sum: WARNING: 6 lines are improperly formatted
mint@mint:/media/mint/Linux Mint 19.2 Cinnamon 64-bit$ 

rlblr
Level 1
Level 1
Posts: 15
Joined: Fri Sep 20, 2019 8:57 am

Re: Problems with mint 19.2 after installation

Post by rlblr » Sun Oct 27, 2019 8:30 pm

WharfRat wrote:
Sun Oct 20, 2019 9:21 am
Spearmint2 wrote:
Sun Oct 20, 2019 1:50 am
WharfRat wrote:
Sun Oct 20, 2019 12:51 am
According to your last screenshot you ran fsck on /dev/sda1 when your third screenshot indicated that /dev/sda2 has errors :?
What implication then? I think he ran it on the entire drive, and just took a snapshot of the sda2 section when it showed on screen.
You're probably correct.

When I saw the errors were reported for sda2 and fsck was run on sda1 I thought perhaps that was the case.

It might help if the OP booted the live media and installed smartmontools to get a look at the results of smartctl.
Here is the results of smartctl:

Code: Select all

mint@mint:~$ sudo smartctl /dev/sda -a
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M7E (AF)
Device Model:     SAMSUNG HM641JI
Serial Number:    S2BEJDQZ900776
LU WWN Device Id: 5 0024e9 003fd5906
Firmware Version: 2AJ10001
User Capacity:    640,135,028,736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Oct 27 20:52:22 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 9780) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 163) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       6
  2 Throughput_Performance  0x0026   056   056   000    Old_age   Always       -       8885
  3 Spin_Up_Time            0x0023   091   087   025    Pre-fail  Always       -       2750
  4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4078
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       46939
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   095   095   000    Old_age   Always       -       5874
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3953
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       3152
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   056   000    Old_age   Always       -       32 (Min/Max 14/44)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       20
223 Load_Retry_Count        0x0032   095   095   000    Old_age   Always       -       5874
225 Load_Cycle_Count        0x0032   029   029   000    Old_age   Always       -       720818

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     42659         -
# 2  Short offline       Completed without error       00%     42607         -
# 3  Short offline       Completed without error       00%     33769         -
# 4  Extended offline    Completed without error       00%     33767         -
# 5  Short offline       Completed without error       00%     33754         -
# 6  Short offline       Completed without error       00%     19617         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

User avatar
Spearmint2
Level 16
Level 16
Posts: 6874
Joined: Sat May 04, 2013 1:41 pm
Location: Maryland, USA

Re: Problems with mint 19.2 after installation

Post by Spearmint2 » Sun Oct 27, 2019 8:53 pm

Everything by tests looks good. I don't know what to tell you. Maybe someone else will have better idea on what the problem is.
All things go better with Mint. Mint julep, mint jelly, mint gum, candy mints, pillow mints, peppermint, chocolate mints, spearmint,....

User avatar
WharfRat
Level 21
Level 21
Posts: 13313
Joined: Thu Apr 07, 2011 8:15 pm

Re: Problems with mint 19.2 after installation

Post by WharfRat » Sun Oct 27, 2019 8:57 pm

Although the disk has seen 5 years+ run time it doesn't report any major errors or high error counts - I've seen a lot worse on running systems.

From what I understand you can't get Mint to run from either drive so maybe it's the controller or memory.

Did you try running the memory test for a couple of hours :?:
ImageImage

Post Reply

Return to “Installation & Boot”