Page 2 of 5

Re: Grub2 information & Links.

Posted: Tue Jan 05, 2010 7:48 pm
by newW2

Re: Grub2 information & Links.

Posted: Thu Jan 07, 2010 2:36 pm
by timber
I found the following link to be most helpful.
Didn't see it in your list, it may have been added since your posts.

http://www.linuxmint.com/wiki/index.php/Grub_2

Thank You for all the helpful links, Fred (et al) they're appreciated!

djb

Re: Grub2 information & Links.

Posted: Fri Jan 08, 2010 5:27 pm
by breaker
WOW, I am so surprised this one hasn't been listed yet, I use it all the time! https://help.ubuntu.com/community/Grub2
Edit by Husse
For some reason two posts disappeared when I merged two topics here
The real info value was this link about grub2 and chainloading Windows

Re: good info installing grub2 and recognizing windows partition

Posted: Mon Feb 08, 2010 10:53 am
by lanternflower
Thanks for this! Without this help I would have never worked out how to sort out putting XP onto the menus.

It's funny because I was only just thinking how this whole menu.lst thing was just too easy and that we really need to make things much more complicated so that people can feel that sense of achievement when they finally get the thing working or that it will be an opportunity for people to contact fellow penguin people and discuss the problem and thus increase their social interaction. Sometimes people have not got so much to talk about and while quizzes such as "what celebrity do you look like" provide a point of conversation, I think many people feel that they are maybe not discussing anything "REAL" and that such conversations, while amusing, are not in the realm of discussing anything of substance. Discussions about boot loaders on the other hand could be as simple or as complicated as you are prepared to make them.

Having said all that I was quite dissapointed to see that the developers didn't take the opportunity of grub 2 to convert the files over to XML which would not only provide greater obfusication (and we all know boot loaders are a favourite target of virus writers) but might provide for greater inoperability with soap or web browsers etc. It could be a first step towards allowing us to serve our boot settings up as web pages. However I'm hoping that this whole UUID thing is just a step on the path to coverting all the files completely over to hexadecimal, now that would be a radical move forward.

In any case thanks so much for the link Breaker! Not only do I feel that sense of achievement but I also feel a warm and fuuzy glow towards you all for your assistance!

Re: good info installing grub2 and recognizing windows partition

Posted: Tue Feb 09, 2010 6:36 am
by Husse
I sense some irony in the post above :)
I simply say grub2 is not ready and I have an unsolvable problem with my grub (well I can do a workaround but not solve the problem :()

Re: Grub2 Mac OS X

Posted: Tue Feb 09, 2010 11:21 am
by Odin Overland
Has anyone successfully booted Mac OS X from GRUB2 on either a GPT or MBR? If so - how? I have been racking my brains here :http://www.insanelymac.com/forum/index. ... pic=189079 but to no avail. I am trying to boot Mac OS X, Windows 7, and Mint/Ubuntu (Mint on GPT iMac, Ubuntu on MBR iMac).

Re: good info installing grub2 and recognizing windows partition

Posted: Fri Feb 12, 2010 10:32 pm
by Leppie
Husse wrote:I simply say grub2 is not ready and I have an unsolvable problem with my grub (well I can do a workaround but not solve the problem :()
do you still have this issue?

Re: Grub2 Mac OS X

Posted: Fri Feb 12, 2010 11:40 pm
by Leppie
Odin Overland wrote:Has anyone successfully booted Mac OS X from GRUB2 on either a GPT or MBR? If so - how? I have been racking my brains here :http://www.insanelymac.com/forum/index. ... pic=189079 but to no avail. I am trying to boot Mac OS X, Windows 7, and Mint/Ubuntu (Mint on GPT iMac, Ubuntu on MBR iMac).
if you could download and run the boot info script and post the generated RESULTS.txt in a new thread, we can have a look at your issue.

Re: good info installing grub2 and recognizing windows partition

Posted: Sat Feb 13, 2010 12:33 pm
by Husse
Nope - thanks for the offer for assistance
I have mentioned what it was and I think you wrote something that got me thinking and led me to the solution

Re: good info installing grub2 and recognizing windows partition

Posted: Sat Feb 13, 2010 2:11 pm
by Leppie
Husse wrote:Nope - thanks for the offer for assistance
I have mentioned what it was and I think you wrote something that got me thinking and led me to the solution
well, glad to have been of assistance then :)

Re: Grub2 Mac OS X

Posted: Fri Feb 19, 2010 3:10 pm
by Odin Overland
Leppie wrote:
Odin Overland wrote:Has anyone successfully booted Mac OS X from GRUB2 on either a GPT or MBR? If so - how? I have been racking my brains here :http://www.insanelymac.com/forum/index. ... pic=189079 but to no avail. I am trying to boot Mac OS X, Windows 7, and Mint/Ubuntu (Mint on GPT iMac, Ubuntu on MBR iMac).
if you could download and run the boot info script and post the generated RESULTS.txt in a new thread, we can have a look at your issue.
http://forums.linuxmint.com/viewtopic.php?f=46&t=42350

Re: good info installing grub2 and recognizing windows partition

Posted: Fri Feb 19, 2010 6:12 pm
by aandreae
I had the same problem and it was simple : my windows partition was unsafe.
I do an ntfsfix on my windows partition (A chkdsk c: /f as the same result).
I rebooted and miracle ! Grub2 saw my windows loader.

If it can help...

Re: good info installing grub2 and recognizing windows partition

Posted: Tue Mar 02, 2010 4:30 pm
by housefull
Thanks for that awesome description! Have fun at Houston!



Glad to hear you're using this: I plan to keep it much more aggressively up-to-date than has been the case in the past, but don't hesitate to let me know if you find errors or need clarifications.

Re: Grub2 information & Links.

Posted: Thu Apr 22, 2010 12:53 pm
by ddalley
Fred: here is a new GRUB2 migration article from IBM that you may want to add to your list of resources.

Re: Grub2 information & Links.

Posted: Thu May 06, 2010 1:26 pm
by distro hopper
Another one for the list: https://help.ubuntu.com/community/Grub2 (very intuitive, all-in-one page)

Re: Grub2 information & Links.

Posted: Fri May 21, 2010 10:51 pm
by gamiwv
hi all people. real confused about grub to grub2 upgrade. I'm using mint 8 _64
4 days ago I have manually upgrade the kernel to 2.6.34 and everything looking to me fine. After a reboot I have upgrade Firefox to 3.6.3. Reboot again and all where as have to be. After some time I decided to upgrade (through the terminal
# sudo upgrade-from-grub-legacy ) grub to grub2. After reboot I have no grub at all. I'm using for the moment a live CD distro to post this.
my system:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1)
00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
01:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)

my usb:
Bus 002 Device 003: ID 046d:c521 Logitech, Inc. MX620 Laser Cordless Mouse
Bus 002 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0b05:1736 ASUSTek Computer, Inc.
Bus 001 Device 003: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

any help? I can see my home file as a folder but I don't know where exactly to look to reverse -if there is a way- my selection to grub2 and get back to grub

Re: Grub2 information & Links.

Posted: Sat May 29, 2010 3:00 pm
by habfan29
Hi all,

I just installed Linux Mint 9 today (first time Mint user, I had been using Ubuntu but the ham-fisted UI changes in 10.04 disgust me) and ran into a serious problem with the Grub installation.

Namely: it didn't. It just plain didn't install. I told it to install to /dev/sda7 (my / partition) but after rebooting I discovered the partition wasn't bootable. Went back into the live CD, reinstalled Mint, same problem. I finally had to run grub-install manually with the --force option; otherwise it whined about "embedding not possible" and "blocklists are a BAD IDEA" and some other useless chunk of technobabble. I take it the Mint installer either does not detect or does not care about grub failing to install in this manner.

This needs to be fixed in the live CD. I'm fairly tech savvy (and have a laptop so I could still get online!) so I could find the problem and fix it myself; but the installer should never just silently fail like that without informing the user. I'm going to go file a bug report if one doesn't already exist.

Re: Grub2 information & Links.

Posted: Thu Jul 15, 2010 7:25 pm
by angle333
I don't know why grub2 isn't picking it up. I have had a few instances of grub2 not picking up all the kernels scattered over my drives but I don't remember grub2 actually ignoring ones that it located.

Here are a couple of things I do when troubleshooting:

a. Change one of the titles so I know the grub.cfg I see when it boots is the one I am looking at in the editor (i.e. if there are multiple grub.cfg files on your system). You will have to chmod +w to actually edit grub.cfg

b. Search your system for multiple instances of the file.

c. Place the kernel you want to show up in /etc/grub.d/40_custom so at least it shows up when you update grub. At best you will have two instances - the detected and the custom entries; at worst you will have at least the one from the 40_custom file. Don't forget to make the file executable.

d. Reinstall grub2 with grub-install

Re: Grub2 information & Links.

Posted: Thu Sep 23, 2010 6:44 pm
by rijnsma
Grub2 is a disaster for me and maybe (probably) ext4 belongs to it too. I'm doing all with Linux. No Windows yet again after I used it formerly until Windows ME.

I'm happy to say that I managed to keep my Linux multiboot-system okay in spite of my (intens) testing ext4 and Grub2. I did it on another HD with dummy OS's. Else I would have had a completely broken system. But I knew before that things could become tricky. So I kept the safe side.

Now I stick to a good multiboot system with for example PCLinuxOS, XKUbuntu, still with Mint 6 (+bootloader) and Mint 8 Helena as latest Mint and some more partition to move, and the whole thing on ext3. Not on ext4.
And what for ext4? I don't see the benefits. It is even not much faster.
But this 'sticking' of me can't go on for always, I know Ubuntu and Mint. :? Before one knows one is working with a tool from the 'stone-age'. Very, very short release-cycle.

I have problems for instance:
when I use some distro's without a bootloader and one with a bootloader where in former days a
Mint- of Ubuntu-distro made a fine list in Grub's menu.lst of entrees, when the bootloader was 'on'.
You could repeat that chainloading principle over and over again. Very nice. I don't see the fun of /etc/Grub.d.
And so you can experiment and test as much as you like with distro's along each other on several partitions.
But with ext4 and Grub2 I even can't do a 'redo-MBR' to get Grub-things right.

Then:
I use remastersys to keep things safe enough. Supertool. But not anymore it looks like.
Remastersys too has suddenly problems because of Grub2 or ext4 when I'm installing an OS to another
disc for example, where things formerly went always smooth.

I hope this is temporalily. I also hope, this is not a bug or something like that, so I'm worrying for nothing.
The possibillity to play around with OS's and also doing my work with them was a very important reason for me to do things Linux. Very comfortable it was..

I hope the Grub2-ext4 story is not a risk for Linux as a whole?! :(

Re: Grub2 information & Links.

Posted: Sun Sep 26, 2010 9:21 pm
by ur_sunny