I have reoccurring problem with my linux mint 20.1 (cinnamon or XFCE) when installed on different devices. Installation is smooth, however after a while, several system re-boots, installation of recommended updates and couple of days of usage, the system starts to occasionally freeze and eventually it is collapsed to re-boot. On reboot I got the below error message. Currently I'm using macbook pro mid 2012 (system info ran from bootable flash is listed below), but it also happened to me on different Dell laptop. Dmesg output is attached.
Any experience or useful advice?
I have only found these threads:
viewtopic.php?f=46&t=359426
https://ostechnix.com/how-to-fix-busybo ... on-ubuntu/
https://ostechnix.com/how-to-fix-busybo ... on-ubuntu/
But was not helpful for me.
Thank you for any advice.
Code: Select all
mint@mint:~$ inxi -Fxxxrz
System: Kernel: 5.4.0-58-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: MATE 1.24.0 info: mate-panel
wm: marco 1.24.0 dm: LightDM 1.30.0 Distro: Linux Mint 20.1 Ulyssa base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Apple product: MacBookPro9,2 v: 1.0 serial: <filter> Chassis: type: 10 v: Mac-6F01561E16C75D06
serial: <filter>
Mobo: Apple model: Mac-6F01561E16C75D06 v: MacBookPro9,2 serial: <filter> UEFI: Apple v: 422.0.0.0.0
date: 06/04/2021
Battery: ID-1: BAT0 charge: 57.7 Wh condition: 58.8/62.9 Wh (93%) volts: 12.5/10.9 model: DP bq20z451 type: Li-ion
serial: N/A status: Full cycles: 718
CPU: Topology: Dual Core model: Intel Core i5-3210M bits: 64 type: MT MCP arch: Ivy Bridge rev: 9 L2 cache: 3072 KiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19955
Speed: 1198 MHz min/max: 1200/3100 MHz Core speeds (MHz): 1: 1197 2: 1197 3: 1197 4: 1197
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Apple driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:0166
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa compositor: marco v: 1.24.0
resolution: 1280x800~60Hz, 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 20.0.8 compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1e20
Sound Server: ALSA v: k5.4.0-58-generic
Network: Device-1: Broadcom and subsidiaries NetXtreme BCM57765 Gigabit Ethernet PCIe driver: tg3 v: 3.137 port: efa0
bus ID: 01:00.0 chip ID: 14e4:16b4
IF: enp1s0f0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Broadcom and subsidiaries BCM4331 802.11a/b/g/n vendor: Apple AirPort Extreme driver: bcma-pci-bridge
v: N/A port: efa0 bus ID: 02:00.0 chip ID: 14e4:4331
Drives: Local Storage: total: 454.60 GiB used: 819.1 MiB (0.2%)
ID-1: /dev/sda vendor: Kingston model: SA400S37480G size: 447.13 GiB speed: 6.0 Gb/s serial: <filter> rev: B1C2
temp: 32 C scheme: GPT
ID-2: /dev/sdb type: USB model: General USB Flash Disk size: 7.47 GiB serial: <filter> rev: 1.00 scheme: MBR
Partition: ID-1: / size: 7.77 GiB used: 819.1 MiB (10.3%) fs: overlay source: ERR-102
ID-2: swap-1 size: 30.33 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda4
Sensors: System Temperatures: cpu: 71.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Active apt repos in: /etc/apt/sources.list
1: deb cdrom:[Linux Mint 20.1 _Ulyssa_ - Release amd64 20210103]/ focal contrib main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com ulyssa main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Info: Processes: 209 Uptime: 1h 04m Memory: 15.55 GiB used: 1.75 GiB (11.2%) Init: systemd v: 245 runlevel: 5 Compilers:
gcc: 9.3.0 alt: 9 Shell: bash v: 5.0.17 running in: mate-terminal inxi: 3.0.38
Code: Select all
mint@mint:~$ dmesg --level=err,warn
[ 0.152728] DMAR-IR: [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
[ 0.152733] DMAR-IR: Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
[ 0.196089] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.196089] #3
[ 0.218448] ACPI Error: Needed type [Reference], found [Integer] 00000000ebe39fcd (20190816/exresop-66)
[ 0.218457] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431)
[ 0.218463] No Local Variables are initialized for Method [_PDC]
[ 0.218464] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.218465] Arg0: 00000000b0514190 <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.218471] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529)
[ 0.266144] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.266145] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.581509] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.581510] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.584449] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.584450] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.584451] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.584452] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.584453] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.584454] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.584455] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.584456] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.584457] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.055172] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204)
[ 1.055353] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.055358] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.055363] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204)
[ 1.055368] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.400312] sd 6:0:0:0: [sdb] No Caching mode page found
[ 2.400314] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.697461] JBD2: Invalid checksum recovering data block 524321 in log
[ 5.257439] JBD2: recovery failed
[ 5.257443] EXT4-fs (sdb3): error loading journal
[ 16.086878] systemd[897]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory
[ 16.094825] systemd[1]: Failed unmounting /cdrom.
[ 19.198940] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 20.028197] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 20.028834] b43 bcma0:1: Direct firmware load for b43/ucode29_mimo.fw failed with error -2
[ 20.028912] b43 bcma0:1: Direct firmware load for b43/ucode29_mimo.fw failed with error -2
[ 20.028950] b43 bcma0:1: Direct firmware load for b43-open/ucode29_mimo.fw failed with error -2
[ 20.028978] b43 bcma0:1: Direct firmware load for b43-open/ucode29_mimo.fw failed with error -2
[ 20.028980] b43-phy0 ERROR: Firmware file "b43/ucode29_mimo.fw" not found
[ 20.028982] b43-phy0 ERROR: Firmware file "b43-open/ucode29_mimo.fw" not found
[ 20.028984] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 20.415115] applesmc: send_byte(0x00, 0x0300) fail: 0x40
[ 20.415117] applesmc: LKSB: write data fail
[ 33.095387] JBD2: Invalid checksum recovering data block 524321 in log
[ 35.387521] JBD2: recovery failed
[ 35.387530] EXT4-fs (sdb3): error loading journal