Errors when turning ON
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Errors when turning ON
Hi, I tried installing Linux Lite over Windows 10 and I failed. There were errors and installation didn't boot. I also had some vmlinuz error. But the strange thing is usb stick (1) was named Linpus lite both grub and bios.
So I got borred and put Mint 19 via Rufus on usb stick (2).
Second stick was also seen as Linpus Lite in bios
https://imgur.com/a/rYwHL5e
I managed to install it somehow, I had some errors.
https://imgur.com/a/BX1ZqhY
So I entered Bios and Disabled Secure boot and here I see that my Ssd is named Ubuntu
I restart it, and vmlinuz error dissapered but other errors are still here:
https://imgur.com/a/zBYo3hh
then It display login but it's not Gui
and the errors continue until it shows Gui login.
Now system don't boot so I had to switch Graphic card to UMA in Bios.
So I got borred and put Mint 19 via Rufus on usb stick (2).
Second stick was also seen as Linpus Lite in bios
https://imgur.com/a/rYwHL5e
I managed to install it somehow, I had some errors.
https://imgur.com/a/BX1ZqhY
So I entered Bios and Disabled Secure boot and here I see that my Ssd is named Ubuntu
I restart it, and vmlinuz error dissapered but other errors are still here:
https://imgur.com/a/zBYo3hh
then It display login but it's not Gui
and the errors continue until it shows Gui login.
Now system don't boot so I had to switch Graphic card to UMA in Bios.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
-
- Level 12
- Posts: 4285
- Joined: Tue May 28, 2019 4:27 pm
Re: Errors when turning ON
You could try using Mint 20 and you might have better luck as itmay be more compatible with your hardware - try this version first,
https://linuxmint.com/edition.php?id=292
or if your computer is within a year or so old, Mint 20 Edge Version
https://www.linuxmint.com/edition.php?id=296
Be sure to read the installation notes and follow them carefully.
Let us know how it goes.
Next time you post, if you need more help, follow number 5 in the follow link so we have some info about your hardware or you won't get much useful help:
http://forums.linuxmint.com/viewtopic.php?f=17&t=83444
https://linuxmint.com/edition.php?id=292
or if your computer is within a year or so old, Mint 20 Edge Version
https://www.linuxmint.com/edition.php?id=296
Be sure to read the installation notes and follow them carefully.
Let us know how it goes.
Next time you post, if you need more help, follow number 5 in the follow link so we have some info about your hardware or you won't get much useful help:
http://forums.linuxmint.com/viewtopic.php?f=17&t=83444
Re: Errors when turning ON
I made snapshot and updated to 20.0 with errors while booting, now I hit a wall. The system show logo and that's it. Or it doesn't show it. So I switched graphic card to UMA in Bios and it was kinda okay. I updated to latest Mint ver.gittiest personITW wrote: ⤴Fri Jun 24, 2022 12:03 pm Let us know how it goes.
Next time you post, if you need more help, follow number 5 in the follow link so we have some info about your hardware or you won't get much useful help:
http://forums.linuxmint.com/viewtopic.php?f=17&t=83444
So I followed this guide to disable nouveau https://askubuntu.com/questions/897627/ ... 20-on-boot
After the nouveau disabled, I entered bios and enabled Discrete gpu. Installed latest official Nvidia driver.
And now I receive this error when booting:
https://imgur.com/a/QsuEdT6
Here is output
Code: Select all
System:
Kernel: 5.4.0-121-generic x86_64 bits: 64 compiler: gcc v: 9.4.0
Desktop: Xfce 4.16.0 tk: Gtk 3.24.20 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Linux Mint 20.3 Una base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: LENOVO product: 80SR v: Lenovo ideapad 510-15ISK
CPU:
Topology: Dual Core model: Intel Core i5-6200U bits: 64 type: MT MCP
arch: Skylake rev: 3 L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 19200
Speed: 500 MHz min/max: 400/2800 MHz Core speeds (MHz): 1: 500 2: 500
3: 500 4: 500
Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:1916
Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Lenovo driver: nvidia
v: 510.73.05 bus ID: 03:00.0 chip ID: 10de:134d
Display: x11 server: X.Org 1.20.13 driver: modesetting,nvidia
unloaded: fbdev,nouveau,vesa tty: N/A
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 21.2.6
direct render: Yes
Partition:
ID-1: / size: 72.83 GiB used: 18.34 GiB (25.2%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 156.26 GiB used: 227.2 MiB (0.1%) fs: ext4
dev: /dev/sda4
ID-3: swap-1 size: 3.73 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://packages.linuxmint.com una main upstream import backport #id:linuxmint_main
2: deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http://archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http://archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http://security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http://archive.canonical.com/ubuntu/ focal partner
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d70
Sound Server: ALSA v: k5.4.0-121-generic
Info:
Processes: 209 Uptime: 2m Memory: 7.68 GiB used: 787.9 MiB (10.0%)
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.4.0 alt: 7/9
Shell: bash v: 5.0.17 running in: xfce4-terminal inxi: 3.0.38
-
- Level 12
- Posts: 4285
- Joined: Tue May 28, 2019 4:27 pm
Re: Errors when turning ON
To be honest, if you installed 19 then upgraded to 20 you'll save loads of time by just downloading the 20.3 version and re-installing from scratch.
A clean install is easier to troubleshoot.
With your hardware, Mate should run well on your computer (once it works properly) and you shouldn't need the Edge version.
https://linuxmint.com/edition.php?id=293
A clean install is easier to troubleshoot.
With your hardware, Mate should run well on your computer (once it works properly) and you shouldn't need the Edge version.
https://linuxmint.com/edition.php?id=293
Re: Errors when turning ON
That was the idea 19 -> 20.3.gittiest personITW wrote: ⤴Fri Jun 24, 2022 1:25 pm To be honest, if you installed 19 then upgraded to 20 you'll save loads of time by just downloading the 20.3 version and re-installing from scratch.
A clean install is easier to troubleshoot.
With your hardware, Mate should run well on your computer (once it works properly) and you shouldn't need the Edge version.
https://linuxmint.com/edition.php?id=293
I have preinstalled win10 license. So maybe that's why I had problems installing linux over it. Plus You neglected that 2 installation sticks are read as Linpus/Ubuntu.
I have this strange error when turning on and I don't know how to get log for it.
https://imgur.com/a/tTUJGdl
BTW, I disabled Intel trust platform and enabled Secure boot.
-
- Level 20
- Posts: 12341
- Joined: Sun Aug 09, 2015 10:00 am
Re: Errors when turning ON
Did you disable fast boot in Bios and Windows?Boot from a live 20.3 usb and test. See if you get the errors.
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help.
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Re: Errors when turning ON
Fastboot is disabled, secureboot isn't.deepakdeshp wrote: ⤴Sat Jun 25, 2022 3:33 am Did you disable fast boot in Bios and Windows?Boot from a live 20.3 usb and test. See if you get the errors.
So, I put live usb stick and booted, errors occured:
1. vmlinuz
2. nouveau
I waited some time and it boots!
When restarting from live usb...
Bug soft lockup - cpu#0 stuck for 22s xorg 1317
But there was no "system program problem detected"
I disabled Secureboot now.
So, now when I turn on, Lenovo boot logo appears 2x.
Once when I turn on and then I got Mint logo; and then Lenovo logo again.
When I restart/shut down there is Lenovo boot logo before Mint logo.
Last edited by bake55 on Sun Jun 26, 2022 8:39 am, edited 1 time in total.
-
- Level 20
- Posts: 12341
- Joined: Sun Aug 09, 2015 10:00 am
Re: Errors when turning ON
Not sure if the system is booting after disabling secure boot. Whats the status?.I disabled Secureboot now.
So, now when I turn on, Lenovo boot logo appears 2x.
Once when I turn on and then I got Mint logo; and then Lenovo logo again.
When I restart/shut down there is Lenovo boot logo before Mint logo.
Test your CPU especially with https://orcacore.com/stress-tests-and-b ... in-ubuntu/.
You may also boot from live USB, copy your data to an external drive and reinstall the system since the system is working after booting from usb0
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help.
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Re: Errors when turning ON
The system is working great, except the error I get every time I login "system problem detected".deepakdeshp wrote: ⤴Sun Jun 26, 2022 8:12 amNot sure if the system is booting after disabling secure boot. Whats the status?.I disabled Secureboot now.
So, now when I turn on, Lenovo boot logo appears 2x.
Once when I turn on and then I got Mint logo; and then Lenovo logo again.
When I restart/shut down there is Lenovo boot logo before Mint logo.
Test your CPU especially with https://orcacore.com/stress-tests-and-b ... in-ubuntu/.
You may also boot from live USB, copy your data to an external drive and reinstall the system since the system is working after booting from usb0
Reinstalling whole system because 1 error is boring.
-
- Level 20
- Posts: 12341
- Joined: Sun Aug 09, 2015 10:00 am
Re: Errors when turning ON
So after re install isn't there any problem now?
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help.
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
-
- Level 20
- Posts: 12341
- Joined: Sun Aug 09, 2015 10:00 am
Re: Errors when turning ON
So after re install isn't there any problem now?
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help.
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb
Regards,
Deepak
Mint 21.1 Cinnamon 64 bit with AMD A6 / 8GB
Mint 21.1 Cinnamon AMD Ryzen3500U/8gb