Virtual Box errors

Questions about applications and software
Forum rules
Before you post please read how to get help
Post Reply
teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Virtual Box errors

Post by teddy ballgame » Sat Feb 17, 2018 4:17 pm

Hello.

I am new to Linux after 20 plus years on Windows but the latest update to W10 completely crashed my hard drive and I was unable to recover it. So I gave a fresh install of Linux Mint Cinnamon 18.1 and could really do without Windows except for a few applications I need. So my first step was to install Virtual Box It installs but when I try to load the VM I get this error I take is somewhat common so there is no shortage of suggested fixes when you google it

***
Kernel driver not installed (rc=-1908)

The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please install sudo /etc/init.d/vboxdrv setup
sudo /etc/init.d/vboxdrv setup
virtualbox-dkmssudo /etc/init.d/vboxdrv setup
package and load the kernel module by executing

'modprobe vboxdrv'

as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.

where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT.
4.13.0-32-generic
***
However, all the fixes I have found just take me down a rabbit hole and lead to a fresh set of issues. My fist issue is I'm only starting to get comfortable using the command line but following several youtube videos led me update the linux headers and reinstall several times. At this point, the installtion completely fails after
running "apt install --reinstall virtualbox virtualbox-dkms" I get

***

Job for virtualbox.service failed because the control process exited with error code. See "systemctl status virtualbox.service" and "journalctl -xe" for details.
invoke-rc.d: initscript virtualbox, action "restart" failed.
virtualbox.service - LSB: VirtualBox Linux kernel module
Loaded: loaded (/etc/init.d/virtualbox; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2018-02-17 14:35:32 EST; 5ms ago
Docs: man:systemd-sysv-generator(8)
Process: 9987 ExecStart=/etc/init.d/virtualbox start (code=exited, status=1/FAILURE)

Job for virtualbox.service failed because the control process exited with error code. See "systemctl status virtualbox.service" and "journalctl -xe" for details.
invoke-rc.d: initscript virtualbox, action "restart" failed. virtualbox.service - LSB: VirtualBox Linux kernel module
Loaded: loaded (/etc/init.d/virtualbox; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2018-02-17 14:35:32 EST; 5ms ago
Docs: man:systemd-sysv-generator(8)
Process: 9987 ExecStart=/etc/init.d/virtualbox start (code=exited, status=1/FAILURE)

Job for virtualbox.service failed because the control process exited with error code. See "systemctl status virtualbox.service" and "journalctl -xe" for details.
invoke-rc.d: initscript virtualbox, action "restart" failed.
● virtualbox.service - LSB: VirtualBox Linux kernel module
Loaded: loaded (/etc/init.d/virtualbox; bad; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2018-02-17 14:35:32 EST; 5ms ago
Docs: man:systemd-sysv-generator(8)
Process: 9987 ExecStart=/etc/init.d/virtualbox start (code=exited, status=1/FAILURE)
***
Any ideas are appreciated. Thanks for any and all help! Please also let me know if you need more information. The generic kernel has me concerned but I could be way off base.
TB

Cosmo.
Level 23
Level 23
Posts: 17824
Joined: Sat Dec 06, 2014 7:34 am

Re: Virtual Box errors

Post by Cosmo. » Sat Feb 17, 2018 5:15 pm

What is your version of Mint and what is the desktop environment? If you don't know open a terminal and enter:

Code: Select all

inxi -Sz
Paste the output here.

You need to give this information for every help request in every thread.
Do not forget this in the future.

What is your version of VirtualBox?

teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Wed Feb 21, 2018 7:49 pm

My apologies for not providing earlier

Kernel: 4.13.0-32-generic x86_64 (64 bit)
Desktop: Cinnamon 3.6.7 Distro: Linux Mint 18.3 Sylvia

Virtualbox - 5.0.40_Ubuntu r115130
Thanks!
TB

User avatar
Jim Hauser
Level 5
Level 5
Posts: 506
Joined: Mon Jun 30, 2014 10:08 pm
Location: Pascagoula, Mississippi

Re: Virtual Box errors

Post by Jim Hauser » Wed Feb 21, 2018 11:46 pm

teddy ballgame wrote:
Wed Feb 21, 2018 7:49 pm
My apologies for not providing earlier

Kernel: 4.13.0-32-generic x86_64 (64 bit)
Desktop: Cinnamon 3.6.7 Distro: Linux Mint 18.3 Sylvia

Virtualbox - 5.0.40_Ubuntu r115130
Thanks!
TB
You have probably tried to install Virtualbox from the Software Manager or Synaptic. According to the experts in this forum, this is one case when you should download directly from the Virtualbox website and get the latest version to work with that kernel.

The download page is here: https://www.virtualbox.org/wiki/Downloads

For Mint 18.3 you should download the Ubuntu 16.04 ("Xenial") version. It comes in i386 and AMD64 versions.

I have been running XP in Virtualbox for 4 years now. I had the same problem you are having now but Cosmo helped me out with that and it has been running without any major problems since. Best of luck!

User avatar
AZgl1500
Level 9
Level 9
Posts: 2860
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: Virtual Box errors

Post by AZgl1500 » Wed Feb 21, 2018 11:55 pm

You have the same as I do:
Kernel: 4.13.0-32-generic x86_64 (64 bit)
Desktop: Cinnamon 3.6.7 Distro: Linux Mint 18.3 Sylvia


and I just answered a similar problem within the last hour.

follow that link.

viewtopic.php?f=90&t=264409&p=1434408#p1434408

Cosmo.
Level 23
Level 23
Posts: 17824
Joined: Sat Dec 06, 2014 7:34 am

Re: Virtual Box errors

Post by Cosmo. » Thu Feb 22, 2018 6:58 am

Remove the far outdated version of VB completely, than reboot.

Now install the downloaded version of VB.

teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Thu Feb 22, 2018 8:30 pm

Thanks. Getting closer....I think. Actually, I visited that site Saturday and downloaded the intel package as that is my chipset but as one poster recommended the amd 64 version I tried that. When I try to launch VM I am still get the same error - kernel driver not installed - rc =-1908

The virtual machine 'Windows' has terminated unexpectedly during startup with exit code 1 (0x1). I'll try the intel download instead and report back

***
It is a new version of VB though, so maybe they released a new download
Version 5.2.6 r120293 (Qt5.6.1)

teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Thu Feb 22, 2018 9:12 pm

It definitely doesn't like the intel package. I get a message on the installer "failed to install dependencies - broken cache, run /sbin/vboxconfig as root...which I did and it says vboxdrv.sh: failed: modprobe vboxdrv failed. Please use 'dmesg' to find out why.

dmesg returns too many characters for a single post but it starts

***
[ 0.000000] Linux version 4.13.0-32-generic (buildd@lgw01-amd64-004) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c85d5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c85d6000-0x00000000c8a65fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8a66000-0x00000000c8a7cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c8a7d000-0x00000000c910cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c910d000-0x00000000c9876fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9877000-0x00000000c9877fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9878000-0x00000000c98bafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c98bb000-0x00000000c9cc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x87d7e018-0x87d8d657] usable ==> usable
[ 0.000000] e820: update [mem 0x87d7e018-0x87d8d657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x0000000087d7e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000087d7e018-0x0000000087d8d657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000087d8d658-0x00000000c85d5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c85d6000-0x00000000c8a65fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c8a66000-0x00000000c8a7cfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000c8a7d000-0x00000000c910cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000c910d000-0x00000000c9876fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9877000-0x00000000c9877fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9878000-0x00000000c98bafff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000c98bb000-0x00000000c9cc1fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc8a6a000 ACPI 2.0=0xc8a6a000 SMBIOS=0xc97cb218
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. K75VJ/K75VJ, BIOS 225 10/24/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 7 base 22FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 8110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff954180098000] 98000 size 24576
[ 0.000000] BRK [0x1e832a000, 0x1e832afff] PGTABLE
[ 0.000000] BRK [0x1e832b000, 0x1e832bfff] PGTABLE
[ 0.000000] BRK [0x1e832c000, 0x1e832cfff] PGTABLE
[ 0.000000] BRK [0x1e832d000, 0x1e832dfff] PGTABLE
[ 0.000000] BRK [0x1e832e000, 0x1e832efff] PGTABLE
[ 0.000000] BRK [0x1e832f000, 0x1e832ffff] PGTABLE
[ 0.000000] BRK [0x1e8330000, 0x1e8330fff] PGTABLE
[ 0.000000] BRK [0x1e8331000, 0x1e8331fff] PGTABLE
[ 0.000000] BRK [0x1e8332000, 0x1e8332fff] PGTABLE
[ 0.000000] BRK [0x1e8333000, 0x1e8333fff] PGTABLE
[ 0.000000] BRK [0x1e8334000, 0x1e8334fff] PGTABLE
[ 0.000000] BRK [0x1e8335000, 0x1e8335fff] PGTABLE
[ 0.000000] Secure boot enabled and kernel locked down
[ 0.000000] RAMDISK: [mem 0x3b25c000-0x3e3c5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C8A6A000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C8A6A088 00008C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C8A79240 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C8A6A1A0 00F0A0 (v02 _ASUS_ Notebook 00000022 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000C9100080 000040
[ 0.000000] ACPI: APIC 0x00000000C8A79350 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C8A793E8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000C8A79430 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000C8A79470 000055 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C8A794C8 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 0x00000000C8A79BB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C8A79BF0 000342 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C8A79F38 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8A7A860 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000C8A7B2F8 000038 (v00 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C8A7B330 000776 (v01 SgRef SgTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8A7BAA8 0013A8 (v01 OptRef OptTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22fdd0000-0x22fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000c85d5fff]
[ 0.000000] node 0: [mem 0x00000000c9877000-0x00000000c9877fff]
[ 0.000000] node 0: [mem 0x00000000c98bb000-0x00000000c9cc1fff]
[ 0.000000] node 0: [mem 0x00000000c9ff4000-0x00000000c9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[ 0.000000] On node 0 totalpages: 2065798
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12768 pages used for memmap
[ 0.000000] DMA32 zone: 817129 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED
[ 0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87d7e000-0x87d7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87d8d000-0x87d8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc85d6000-0xc8a65fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8a66000-0xc8a7cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8a7d000-0xc910cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc910d000-0xc9876fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9878000-0xc98bafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9cc2000-0xc9ff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff9543afa00000 s146520 r8192 d29608 u262144
[ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033496
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7958556K/8263192K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 304636K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37823 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2394.614 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.22 BogoMIPS (lpj=9578456)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.015497] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.015961] Security Framework initialized
[ 0.015962] Yama: becoming mindful.
[ 0.015981] AppArmor: AppArmor initialized
[ 0.017265] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017894] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017922] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017942] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018131] CPU: Physical Processor ID: 0
[ 0.018132] CPU: Processor Core ID: 0
[ 0.018137] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.018138] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.018139] FEATURE SPEC_CTRL Not Present
[ 0.018142] mce: CPU supports 9 MCE banks
[ 0.018150] CPU0: Thermal monitoring enabled (TM1)
[ 0.018159] process: using mwait in idle threads
[ 0.018162] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.018162] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.018276] Freeing SMP alternatives memory: 36K
[ 0.024607] smpboot: Max logical packages: 2
[ 0.024682] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.025127] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064820] TSC deadline timer enabled
[ 0.064823] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.064886] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.064906] ... version: 3
[ 0.064907] ... bit width: 48
[ 0.064907] ... generic registers: 4
[ 0.064908] ... value mask: 0000ffffffffffff
[ 0.064909] ... max period: 00007fffffffffff
[ 0.064909] ... fixed-purpose events: 3
[ 0.064909] ... event mask: 000000070000000f
[ 0.064943] Hierarchical SRCU implementation.
[ 0.065827] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.065844] smp: Bringing up secondary CPUs ...
[ 0.065917] x86: Booting SMP configuration:
[ 0.065918] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.080050] smp: Brought up 1 node, 8 CPUs
[ 0.080050] smpboot: Total of 8 processors activated (38313.82 BogoMIPS)
[ 0.084317] devtmpfs: initialized
[ 0.084317] x86/mm: Memory block size: 128MB
[ 0.084640] evm: security.selinux
[ 0.084641] evm: security.SMACK64
[ 0.084641] evm: security.SMACK64EXEC
[ 0.084641] evm: security.SMACK64TRANSMUTE
[ 0.084642] evm: security.SMACK64MMAP
[ 0.084642] evm: security.ima
[ 0.084643] evm: security.capability
[ 0.084656] PM: Registering ACPI NVS region [mem 0xc8a7d000-0xc910cfff] (6881280 bytes)
[ 0.084656] PM: Registering ACPI NVS region [mem 0xc9878000-0xc98bafff] (274432 bytes)
[ 0.084656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084656] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.084656] pinctrl core: initialized pinctrl subsystem
[ 0.084656] RTC time: 0:33:46, date: 02/23/18
[ 0.084656] NET: Registered protocol family 16
[ 0.084656] cpuidle: using governor ladder
[ 0.084656] cpuidle: using governor menu
[ 0.084656] PCCT header not found.
[ 0.084656] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.084656] ACPI: bus type PCI registered
[ 0.084656] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.084656] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.084656] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.084656] PCI: Using configuration type 1 for base access
[ 0.084656] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.085128] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.085130] ACPI: Added _OSI(Module Device)
[ 0.085130] ACPI: Added _OSI(Processor Device)
[ 0.085130] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.085130] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.085130] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.092822] ACPI: Dynamic OEM Table Load:
[ 0.092830] ACPI: SSDT 0xFFFF9543A58BA000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.092935] ACPI: Dynamic OEM Table Load:
[ 0.092935] ACPI: SSDT 0xFFFF9543A58DF000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.092935] ACPI: Dynamic OEM Table Load:
[ 0.092935] ACPI: SSDT 0xFFFF9543A5F5C400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.093295] ACPI: EC: EC started
[ 0.093296] ACPI: EC: interrupt blocked
[ 0.093395] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.093396] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.093397] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.093398] ACPI: Interpreter enabled
[ 0.093421] ACPI: (supports S0 S3 S4 S5)
[ 0.093422] ACPI: Using IOAPIC for interrupt routing
[ 0.093447] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.093718] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.270246] ACPI: Power Resource [FN00] (off)
[ 0.270320] ACPI: Power Resource [FN01] (off)
[ 0.270392] ACPI: Power Resource [FN02] (off)
[ 0.270467] ACPI: Power Resource [FN03] (off)
[ 0.270538] ACPI: Power Resource [FN04] (off)
[ 0.271045] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.271049] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.271278] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.271412] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.271413] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.271827] PCI host bridge to bus 0000:00
[ 0.271829] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.271830] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.271831] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.271833] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.271834] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.271835] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.271836] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.271837] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.271838] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.271839] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.271840] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.271841] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.271843] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.271850] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.271948] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.271983] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.272070] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.272081] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.272087] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.272091] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.272215] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.272240] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.272310] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.272394] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.272419] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[ 0.272494] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.272581] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.272603] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[ 0.272686] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.272772] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.272793] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.272858] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.272947] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.273030] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.273118] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.273200] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.273294] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.273316] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[ 0.273400] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.273484] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.273665] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.273683] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.273691] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.273699] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.273706] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.273714] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.273722] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[ 0.273762] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273836] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.273854] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[ 0.273874] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.274007] pci 0000:01:00.0: [10de:0de3] type 00 class 0x030000
[ 0.274022] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.274032] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.274040] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.274047] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.274053] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.284023] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.284027] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.284030] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284035] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284182] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.284294] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.284416] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.284490] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.284896] pci 0000:02:00.0: supports D1 D2
[ 0.284897] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.296095] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.296099] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.296102] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.296189] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.296245] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[ 0.296309] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[ 0.296439] pci 0000:03:00.0: supports D1 D2
[ 0.296440] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308041] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.308051] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.392287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392336] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392429] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392521] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392613] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.392992] ACPI: EC: interrupt unblocked
[ 0.392999] ACPI: EC: event unblocked
[ 0.393006] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.393007] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.393189] SCSI subsystem initialized
[ 0.393202] libata version 3.00 loaded.
[ 0.393202] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.393202] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.393202] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.393202] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.393202] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.393202] vgaarb: loaded
[ 0.393202] ACPI: bus type USB registered
[ 0.393202] usbcore: registered new interface driver usbfs
[ 0.393202] usbcore: registered new interface driver hub
[ 0.393202] usbcore: registered new device driver usb
[ 0.393202] EDAC MC: Ver: 3.0.0
[ 0.393202] Registered efivars operations
[ 0.408381] PCI: Using ACPI for IRQ routing
[ 0.409564] PCI: pci_cache_line_size set to 64 bytes
[ 0.409619] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.409620] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.409621] e820: reserve RAM buffer [mem 0x87d7e018-0x87ffffff]
[ 0.409621] e820: reserve RAM buffer [mem 0xc85d6000-0xcbffffff]
[ 0.409623] e820: reserve RAM buffer [mem 0xc9878000-0xcbffffff]
[ 0.409624] e820: reserve RAM buffer [mem 0xc9cc2000-0xcbffffff]
[ 0.409625] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.409626] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 0.409702] NetLabel: Initializing
[ 0.409703] NetLabel: domain hash size = 128
[ 0.409703] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.409717] NetLabel: unlabeled traffic allowed by default
[ 0.409729] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.409729] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.412017] clocksource: Switched to clocksource hpet
[ 0.421476] VFS: Disk quotas dquot_6.6.0
[ 0.421494] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.421581] AppArmor: AppArmor Filesystem Enabled
[ 0.421621] pnp: PnP ACPI init
[ 0.421718] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.421722] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421799] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.421800] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.421801] system 00:01: [io 0xffff] has been reserved
[ 0.421802] system 00:01: [io 0xffff] has been reserved
[ 0.421805] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.421806] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.421807] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.421808] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.421811] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421831] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421877] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.421879] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421924] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.421926] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[ 0.421928] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421983] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[ 0.422015] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.504270] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.504272] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.504273] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.504274] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.504275] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.504277] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.504278] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.504279] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.504281] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[ 0.504282] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.504283] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[ 0.504286] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.504425] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.504426] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.504429] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.504468] pnp: PnP ACPI: found 9 devices
[ 0.510634] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.510660] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.510662] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.510665] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.510667] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.510670] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.510673] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.510677] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.510685] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.510690] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.510699] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.510700] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.510702] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.510703] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.510704] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.510705] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.510706] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.510707] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.510708] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.510709] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.510710] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.510712] pci_bus 0000:00: resource 15 [mem 0xcf200000-0xfeafffff window]
[ 0.510713] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.510714] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.510715] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.510716] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.510717] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.510719] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.510823] NET: Registered protocol family 2
[ 0.510966] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.511086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.511195] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.511225] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.511246] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.511295] NET: Registered protocol family 1
[ 0.511307] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.556153] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.556188] Unpacking initramfs...
[ 1.329665] Freeing initrd memory: 50600K
[ 1.329711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.329713] software IO TLB [mem 0xc28ec000-0xc68ec000] (64MB) mapped at [ffff9542428ec000-ffff9542468ebfff]
[ 1.330056] Scanning for low memory corruption every 60 seconds
[ 1.330355] audit: initializing netlink subsys (disabled)
[ 1.330398] audit: type=2000 audit(1519346027.330:1): state=initialized audit_enabled=0 res=1
[ 1.330765] Initialise system trusted keyrings
[ 1.330774] Key type blacklist registered
[ 1.330809] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 1.331850] zbud: loaded
[ 1.332215] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.332341] fuse init (API version 7.26)
[ 1.333846] Key type asymmetric registered
[ 1.333846] Asymmetric key parser 'x509' registered
[ 1.333872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.333909] io scheduler noop registered
[ 1.333909] io scheduler deadline registered
[ 1.333931] io scheduler cfq registered (default)
[ 1.334516] efifb: probing for efifb
[ 1.334527] efifb: framebuffer at 0xd0000000, using 5628k, total 5625k
[ 1.334528] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.334528] efifb: scrolling: redraw
[ 1.334530] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.334616] Console: switching to colour frame buffer device 200x56
[ 1.334638] fb0: EFI VGA frame buffer device
[ 1.334644] intel_idle: MWAIT substates: 0x21120
[ 1.334645] intel_idle: v0.4.1 model 0x3A
[ 1.334910] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.416103] ACPI: AC Adapter [ACAD] (on-line)
[ 1.416171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.416180] ACPI: Power Button [PWRB]
[ 1.416234] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.416346] ACPI: Lid Switch [LID0]
[ 1.416388] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.416396] ACPI: Sleep Button [SLPB]
[ 1.416427] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.416548] ACPI: Power Button [PWRF]
[ 1.417218] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.417322] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.417323] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.417638] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.417639] ACPI: Thermal Zone [TZ01] (69 C)
[ 1.417670] GHES: HEST is not enabled!
[ 1.417810] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.696055] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.696089] ACPI: Battery Slot [BAT1] (battery present)
[ 1.696239] Linux agpgart interface v0.103
[ 1.698564] loop: module loaded
[ 1.698701] libphy: Fixed MDIO Bus: probed
[ 1.698702] tun: Universal TUN/TAP device driver, 1.6
[ 1.698732] PPP generic driver version 2.4.2
[ 1.698770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.698772] ehci-pci: EHCI PCI platform driver
[ 1.698882] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.698887] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.698899] ehci-pci 0000:00:1a.0: debug port 2
[ 1.702799] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.702811] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[ 1.716022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.716054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.716055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.716056] usb usb1: Product: EHCI Host Controller
[ 1.716057] usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.716058] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.716189] hub 1-0:1.0: USB hub found
[ 1.716194] hub 1-0:1.0: 2 ports detected
[ 1.716393] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.716398] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.716408] ehci-pci 0000:00:1d.0: debug port 2
[ 1.720316] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.720324] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[ 1.736022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.736048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.736049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736050] usb usb2: Product: EHCI Host Controller
[ 1.736051] usb usb2: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[ 1.736052] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.736172] hub 2-0:1.0: USB hub found
[ 1.736176] hub 2-0:1.0: 2 ports detected
[ 1.736274] ehci-platform: EHCI generic platform driver
[ 1.736282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.736285] ohci-pci: OHCI PCI platform driver
[ 1.736291] ohci-platform: OHCI generic platform driver
[ 1.736296] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.736400] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.736404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.737488] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.737493] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.737575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.737576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.737577] usb usb3: Product: xHCI Host Controller
[ 1.737578] usb usb3: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
[ 1.737579] usb usb3: SerialNumber: 0000:00:14.0
[ 1.737693] hub 3-0:1.0: USB hub found
[ 1.737701] hub 3-0:1.0: 4 ports detected
[ 1.737963] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.737966] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.737993] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.737994] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.737995] usb usb4: Product: xHCI Host Controller
[ 1.737996] usb usb4: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
[ 1.737997] usb usb4: SerialNumber: 0000:00:14.0
[ 1.738111] hub 4-0:1.0: USB hub found
[ 1.738119] hub 4-0:1.0: 4 ports detected
[ 1.738417] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.749748] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.749752] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.749917] mousedev: PS/2 mouse device common for all mice
[ 1.750253] rtc_cmos 00:02: RTC can wake from S4
[ 1.750374] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.750400] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.750404] i2c /dev entries driver
[ 1.750441] device-mapper: uevent: version 1.0.3
[ 1.750500] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.750504] intel_pstate: Intel P-state driver initializing
[ 1.751029] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.751031] EFI Variables Facility v0.08 2004-May-17
[ 1.764065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.768440] NET: Registered protocol family 10
[ 1.771586] Segment Routing with IPv6
[ 1.771600] NET: Registered protocol family 17
[ 1.771608] Key type dns_resolver registered
[ 1.772312] RAS: Correctable Errors collector initialized.
[ 1.772363] microcode: sig=0x306a9, pf=0x10, revision=0x15
[ 1.772595] microcode: Microcode Update Driver: v2.2.
[ 1.772834] sched_clock: Marking stable (1772592921, 0)->(1773455704, -862783)
[ 1.773023] registered taskstats version 1
[ 1.773029] Loading compiled-in X.509 certificates
[ 1.774967] Loaded X.509 cert 'Build time autogenerated kernel key: ea5b2e3dc303efbb5e4e4f76f9dbd395fda5b554'
[ 1.777353] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 1.777550] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 1.777565] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.777578] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.777771] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 1.778029] Couldn't get size: 0x800000000000000e
[ 1.778031] MODSIGN: Couldn't get UEFI MokListRT
[ 1.778462] zswap: loaded using pool lzo/zbud
[ 1.781022] Key type big_key registered
[ 1.781024] Key type trusted registered
[ 1.782249] Key type encrypted registered
[ 1.782252] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.782254] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.782270] evm: HMAC attrs: 0x1
[ 1.782520] Magic number: 6:728:557
[ 1.782619] rtc_cmos 00:02: setting system clock to 2018-02-23 00:33:48 UTC (1519346028)
[ 1.782663] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.782663] EDD information not available.
[ 1.784452] Freeing unused kernel memory: 2364K
[ 1.784453] Write protecting the kernel read-only data: 18432k
[ 1.784929] Freeing unused kernel memory: 2024K
[ 1.785121] Freeing unused kernel memory: 92K
[ 1.786816] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.786816] x86/mm: Checking user space page tables
[ 1.788406] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.005777] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.005786] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.006390] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffa71680cad000, 08:60:6e:8c:2a:1f, XID 0c900800 IRQ 25
[ 2.006392] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.007851] ahci 0000:00:1f.2: version 3.0
[ 2.008028] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.018123] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.018125] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 2.025021] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.028667] scsi host0: ahci
[ 2.028862] scsi host1: ahci
[ 2.029037] scsi host2: ahci
[ 2.029122] scsi host3: ahci
[ 2.029183] scsi host4: ahci
[ 2.029249] scsi host5: ahci
[ 2.029277] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 26
[ 2.029278] ata2: DUMMY
[ 2.029280] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 26
[ 2.029280] ata4: DUMMY
[ 2.029281] ata5: DUMMY
[ 2.029281] ata6: DUMMY
[ 2.048048] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.059344] MXM: GUID detected in BIOS
[ 2.059375] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.059388] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
[ 2.059521] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.059569] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[ 2.059701] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 2.059704] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 2.059719] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.059720] [drm] Memory usable by graphics device = 2048M
[ 2.059722] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
[ 2.059722] fb: switching to inteldrmfb from EFI VGA
[ 2.059744] Console: switching to colour dummy device 80x25
[ 2.059822] [drm] Replacing VGA console driver
[ 2.059876] nouveau 0000:01:00.0: NVIDIA GF108 (0c1180a1)
[ 2.064010] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.065790] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.065791] [drm] Driver supports precise vblank timestamp query.
[ 2.078542] nouveau 0000:01:00.0: bios: version 70.08.be.00.08
[ 2.079113] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.186405] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 2.196370] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.196371] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.196656] hub 1-1:1.0: USB hub found
[ 2.196714] hub 1-1:1.0: 6 ports detected
[ 2.212377] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.212379] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.212661] hub 2-1:1.0: USB hub found
[ 2.212745] hub 2-1:1.0: 6 ports detected
[ 2.236866] vga_switcheroo: enabled
[ 2.236964] [TTM] Zone kernel: Available graphics memory: 4021444 kiB
[ 2.236965] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.236965] [TTM] Initializing pool allocator
[ 2.236968] [TTM] Initializing DMA pool allocator
[ 2.236986] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 2.236987] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.236990] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.236991] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.236992] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 2.236993] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[ 2.248446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.248446] [drm] Driver supports precise vblank timestamp query.
[ 2.286290] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 2.332013] tsc: Refined TSC clocksource calibration: 2394.559 MHz
[ 2.332019] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284235ba97, max_idle_ns: 440795203400 ns
[ 2.342422] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.344894] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff95439a842800
[ 2.345051] Console: switching to colour frame buffer device 128x48
[ 2.345069] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.346466] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.346468] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.346470] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.350615] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
[ 2.350616] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.355475] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.355476] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.355478] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.359624] ata1.00: configured for UDMA/133
[ 2.359841] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
[ 2.368005] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 2.368288] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 2.368414] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.369014] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.369297] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input7
[ 2.369720] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.369891] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.382343] fbcon: inteldrmfb (fb1) is primary device
[ 2.382344] fbcon: Remapping primary device, fb1, to tty 1-63
[ 2.424295] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.424297] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.424306] sd 0:0:0:0: [sda] Write Protect is off
[ 2.424308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.424316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.424321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.466551] sda: sda1 sda2 sda3
[ 2.467099] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.484064] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 2.637829] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b354
[ 2.637830] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.637831] usb 1-1.4: Product: USB2.0 HD UVC WebCam
[ 2.637832] usb 1-1.4: Manufacturer: Chicony
[ 2.739066] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.741613] ata3.00: ATAPI: HL-DT-ST DVDRAM GT70N, AS00, max UDMA/133
[ 2.744419] ata3.00: configured for UDMA/133
[ 2.747859] scsi 2:0:0
hammer ~ #

Many, many thanks
TB

User avatar
AZgl1500
Level 9
Level 9
Posts: 2860
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: Virtual Box errors

Post by AZgl1500 » Fri Feb 23, 2018 3:24 am

Hey TB,

please don't post the code in open text:

use the left bracket and the word code followed by the right bracket

that will create a moving box display of only 7 or 8 lines that can be scrolled thru....

would you please pretty please? go back and insert the " code " in front of your code statements,

and then at the end of the code, insert left bracket then '/' w/o the quotes and word code followed by right bracket


here is how it will look as you post it:


Image

teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Fri Feb 23, 2018 11:33 pm

This is definately an education whether I get VB running or not...

Code: Select all

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0
[    0.000000] Linux version 4.13.0-32-generic (buildd@lgw01-amd64-004) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #35~16.04.1-Ubuntu SMP Thu Jan 25 10:13:43 UTC 2018 (Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c85d5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c85d6000-0x00000000c8a65fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c8a66000-0x00000000c8a7cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c8a7d000-0x00000000c910cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c910d000-0x00000000c9876fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9877000-0x00000000c9877fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9878000-0x00000000c98bafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c98bb000-0x00000000c9cc1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x87d7e018-0x87d8d657] usable ==> usable
[    0.000000] e820: update [mem 0x87d7e018-0x87d8d657] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040005000-0x0000000087d7e017] usable
[    0.000000] reserve setup_data: [mem 0x0000000087d7e018-0x0000000087d8d657] usable
[    0.000000] reserve setup_data: [mem 0x0000000087d8d658-0x00000000c85d5fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c85d6000-0x00000000c8a65fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c8a66000-0x00000000c8a7cfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000c8a7d000-0x00000000c910cfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000c910d000-0x00000000c9876fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c9877000-0x00000000c9877fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c9878000-0x00000000c98bafff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000c98bb000-0x00000000c9cc1fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xc8a6a000  ACPI 2.0=0xc8a6a000  SMBIOS=0xc97cb218 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. K75VJ/K75VJ, BIOS 225 10/24/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 220000000 mask FF0000000 write-back
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CC000000 mask FFC000000 uncachable
[    0.000000]   6 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   7 base 22FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 8110M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff970ac0098000] 98000 size 24576
[    0.000000] BRK [0x1a372a000, 0x1a372afff] PGTABLE
[    0.000000] BRK [0x1a372b000, 0x1a372bfff] PGTABLE
[    0.000000] BRK [0x1a372c000, 0x1a372cfff] PGTABLE
[    0.000000] BRK [0x1a372d000, 0x1a372dfff] PGTABLE
[    0.000000] BRK [0x1a372e000, 0x1a372efff] PGTABLE
[    0.000000] BRK [0x1a372f000, 0x1a372ffff] PGTABLE
[    0.000000] BRK [0x1a3730000, 0x1a3730fff] PGTABLE
[    0.000000] BRK [0x1a3731000, 0x1a3731fff] PGTABLE
[    0.000000] BRK [0x1a3732000, 0x1a3732fff] PGTABLE
[    0.000000] BRK [0x1a3733000, 0x1a3733fff] PGTABLE
[    0.000000] BRK [0x1a3734000, 0x1a3734fff] PGTABLE
[    0.000000] BRK [0x1a3735000, 0x1a3735fff] PGTABLE
[    0.000000] Secure boot enabled and kernel locked down
[    0.000000] RAMDISK: [mem 0x3b25c000-0x3e3c5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C8A6A000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000C8A6A088 00008C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000C8A79240 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000C8A6A1A0 00F0A0 (v02 _ASUS_ Notebook 00000022 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000C9100080 000040
[    0.000000] ACPI: APIC 0x00000000C8A79350 000092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000C8A793E8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000C8A79430 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: MSDM 0x00000000C8A79470 000055 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000C8A794C8 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000C8A79BB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000C8A79BF0 000342 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000C8A79F38 000926 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C8A7A860 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0x00000000C8A7B2F8 000038 (v00 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000C8A7B330 000776 (v01 SgRef  SgTabl   00001000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000C8A7BAA8 0013A8 (v01 OptRef OptTabl  00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22fdd0000-0x22fdfafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000c85d5fff]
[    0.000000]   node   0: [mem 0x00000000c9877000-0x00000000c9877fff]
[    0.000000]   node   0: [mem 0x00000000c98bb000-0x00000000c9cc1fff]
[    0.000000]   node   0: [mem 0x00000000c9ff4000-0x00000000c9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[    0.000000] On node 0 totalpages: 2065798
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12768 pages used for memmap
[    0.000000]   DMA32 zone: 817129 pages, LIFO batch:31
[    0.000000]   Normal zone: 19448 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED
[    0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x87d7e000-0x87d7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x87d8d000-0x87d8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc85d6000-0xc8a65fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8a66000-0xc8a7cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8a7d000-0xc910cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc910d000-0xc9876fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9878000-0xc98bafff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9cc2000-0xc9ff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff970cefa00000 s146520 r8192 d29608 u262144
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2033496
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-32-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7958556K/8263192K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 304636K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37823 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.450 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.90 BogoMIPS (lpj=9577800)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.015479] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.015948] Security Framework initialized
[    0.015950] Yama: becoming mindful.
[    0.015969] AppArmor: AppArmor initialized
[    0.017253] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017880] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017907] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.017927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018117] CPU: Physical Processor ID: 0
[    0.018118] CPU: Processor Core ID: 0
[    0.018123] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018123] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018125] FEATURE SPEC_CTRL Not Present
[    0.018127] mce: CPU supports 9 MCE banks
[    0.018136] CPU0: Thermal monitoring enabled (TM1)
[    0.018148] process: using mwait in idle threads
[    0.018150] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.018151] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018266] Freeing SMP alternatives memory: 36K
[    0.020767] smpboot: Max logical packages: 2
[    0.020842] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.021261] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063602] TSC deadline timer enabled
[    0.063605] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.063668] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.063689] ... version:                3
[    0.063689] ... bit width:              48
[    0.063690] ... generic registers:      4
[    0.063690] ... value mask:             0000ffffffffffff
[    0.063691] ... max period:             00007fffffffffff
[    0.063691] ... fixed-purpose events:   3
[    0.063692] ... event mask:             000000070000000f
[    0.063726] Hierarchical SRCU implementation.
[    0.064000] smp: Bringing up secondary CPUs ...
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1
[    0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064000]  #2 #3 #4 #5 #6 #7
[    0.076050] smp: Brought up 1 node, 8 CPUs
[    0.076050] smpboot: Total of 8 processors activated (38311.20 BogoMIPS)
[    0.080316] devtmpfs: initialized
[    0.080316] x86/mm: Memory block size: 128MB
[    0.080637] evm: security.selinux
[    0.080637] evm: security.SMACK64
[    0.080638] evm: security.SMACK64EXEC
[    0.080638] evm: security.SMACK64TRANSMUTE
[    0.080639] evm: security.SMACK64MMAP
[    0.080639] evm: security.ima
[    0.080640] evm: security.capability
[    0.080653] PM: Registering ACPI NVS region [mem 0xc8a7d000-0xc910cfff] (6881280 bytes)
[    0.080653] PM: Registering ACPI NVS region [mem 0xc9878000-0xc98bafff] (274432 bytes)
[    0.080653] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080653] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.080653] pinctrl core: initialized pinctrl subsystem
[    0.080653] RTC time:  3:17:11, date: 02/24/18
[    0.080653] NET: Registered protocol family 16
[    0.080653] cpuidle: using governor ladder
[    0.080653] cpuidle: using governor menu
[    0.080653] PCCT header not found.
[    0.080653] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.080653] ACPI: bus type PCI registered
[    0.080653] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080653] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.080653] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.080653] PCI: Using configuration type 1 for base access
[    0.080653] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.081128] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.081130] ACPI: Added _OSI(Module Device)
[    0.081130] ACPI: Added _OSI(Processor Device)
[    0.081130] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.081130] ACPI: Added _OSI(Processor Aggregator Device)
[    0.081130] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088824] ACPI: Dynamic OEM Table Load:
[    0.088831] ACPI: SSDT 0xFFFF970CE58D6000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.088934] ACPI: Dynamic OEM Table Load:
[    0.088934] ACPI: SSDT 0xFFFF970CE5F6D000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.088934] ACPI: Dynamic OEM Table Load:
[    0.088934] ACPI: SSDT 0xFFFF970CE5FD8200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.089303] ACPI: EC: EC started
[    0.089304] ACPI: EC: interrupt blocked
[    0.089404] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.089405] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.089406] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.089407] ACPI: Interpreter enabled
[    0.089429] ACPI: (supports S0 S3 S4 S5)
[    0.089430] ACPI: Using IOAPIC for interrupt routing
[    0.089453] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.089724] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.286256] ACPI: Power Resource [FN00] (off)
[    0.286330] ACPI: Power Resource [FN01] (off)
[    0.286403] ACPI: Power Resource [FN02] (off)
[    0.286475] ACPI: Power Resource [FN03] (off)
[    0.286548] ACPI: Power Resource [FN04] (off)
[    0.287053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.287058] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.287283] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.287415] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.287416] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.287836] PCI host bridge to bus 0000:00
[    0.287839] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.287840] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.287841] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.287842] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.287843] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.287844] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.287845] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.287846] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.287847] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.287848] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.287849] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.287851] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[    0.287852] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.287859] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.287958] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.287992] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.288082] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.288093] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.288099] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.288103] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.288228] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.288253] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[    0.288322] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.288406] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.288431] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[    0.288506] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.288592] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.288615] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[    0.288698] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.288781] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.288801] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[    0.288865] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.288955] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.289039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.289128] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.289210] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.289303] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.289325] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[    0.289409] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.289493] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.289673] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.289692] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.289699] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.289707] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.289714] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.289720] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.289728] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[    0.289769] pci 0000:00:1f.2: PME# supported from D3hot
[    0.289843] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.289862] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[    0.289883] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.290016] pci 0000:01:00.0: [10de:0de3] type 00 class 0x030000
[    0.290031] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.290040] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.290049] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.290055] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.290061] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.304024] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.304029] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.304032] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.304037] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.304188] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.304316] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.304437] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.304512] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.304923] pci 0000:02:00.0: supports D1 D2
[    0.304924] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.320094] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.320098] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.320102] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.320190] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.320240] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[    0.320301] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[    0.320439] pci 0000:03:00.0: supports D1 D2
[    0.320440] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.336042] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.336053] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.432285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432335] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432381] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432475] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432521] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.432613] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.436003] ACPI: EC: interrupt unblocked
[    0.436003] ACPI: EC: event unblocked
[    0.436003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.436003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.436003] SCSI subsystem initialized
[    0.436013] libata version 3.00 loaded.
[    0.436022] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.436022] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.436022] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.436022] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.436022] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.436022] vgaarb: loaded
[    0.436030] ACPI: bus type USB registered
[    0.436042] usbcore: registered new interface driver usbfs
[    0.436048] usbcore: registered new interface driver hub
[    0.436066] usbcore: registered new device driver usb
[    0.436098] EDAC MC: Ver: 3.0.0
[    0.436098] Registered efivars operations
[    0.452756] PCI: Using ACPI for IRQ routing
[    0.453565] PCI: pci_cache_line_size set to 64 bytes
[    0.453620] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.453621] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.453622] e820: reserve RAM buffer [mem 0x87d7e018-0x87ffffff]
[    0.453623] e820: reserve RAM buffer [mem 0xc85d6000-0xcbffffff]
[    0.453625] e820: reserve RAM buffer [mem 0xc9878000-0xcbffffff]
[    0.453626] e820: reserve RAM buffer [mem 0xc9cc2000-0xcbffffff]
[    0.453627] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[    0.453628] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    0.453702] NetLabel: Initializing
[    0.453703] NetLabel:  domain hash size = 128
[    0.453703] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.453717] NetLabel:  unlabeled traffic allowed by default
[    0.453733] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.453733] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.456018] clocksource: Switched to clocksource hpet
[    0.465489] VFS: Disk quotas dquot_6.6.0
[    0.465506] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.465595] AppArmor: AppArmor Filesystem Enabled
[    0.465635] pnp: PnP ACPI init
[    0.465734] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.465737] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.465814] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.465816] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.465817] system 00:01: [io  0xffff] has been reserved
[    0.465818] system 00:01: [io  0xffff] has been reserved
[    0.465819] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.465820] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.465822] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.465823] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.465825] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.465847] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.465891] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.465894] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.465940] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.465942] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[    0.465944] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.466001] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[    0.466035] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.548267] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.548268] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.548269] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.548271] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.548272] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.548273] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.548275] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.548276] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.548277] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[    0.548279] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.548280] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[    0.548282] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548419] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.548420] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    0.548422] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.548461] pnp: PnP ACPI: found 9 devices
[    0.554644] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.554671] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.554673] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.554675] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.554677] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.554681] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.554683] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.554688] pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff]
[    0.554696] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.554701] pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.554710] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.554711] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.554712] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.554713] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.554715] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.554716] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.554717] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.554718] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.554719] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.554720] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.554721] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.554722] pci_bus 0000:00: resource 15 [mem 0xcf200000-0xfeafffff window]
[    0.554724] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.554725] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.554726] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.554727] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.554728] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[    0.554730] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.554835] NET: Registered protocol family 2
[    0.554976] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.555098] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.555208] TCP: Hash tables configured (established 65536 bind 65536)
[    0.555239] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.555260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.555310] NET: Registered protocol family 1
[    0.555322] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.604150] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.604187] Unpacking initramfs...
[    1.377942] Freeing initrd memory: 50600K
[    1.377989] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.377991] software IO TLB [mem 0xc28ec000-0xc68ec000] (64MB) mapped at [ffff970b828ec000-ffff970b868ebfff]
[    1.378334] Scanning for low memory corruption every 60 seconds
[    1.378633] audit: initializing netlink subsys (disabled)
[    1.378681] audit: type=2000 audit(1519442232.378:1): state=initialized audit_enabled=0 res=1
[    1.379046] Initialise system trusted keyrings
[    1.379056] Key type blacklist registered
[    1.379090] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.380148] zbud: loaded
[    1.380503] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.380628] fuse init (API version 7.26)
[    1.381959] Key type asymmetric registered
[    1.381960] Asymmetric key parser 'x509' registered
[    1.381986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.382020] io scheduler noop registered
[    1.382021] io scheduler deadline registered
[    1.382043] io scheduler cfq registered (default)
[    1.382627] efifb: probing for efifb
[    1.382638] efifb: framebuffer at 0xd0000000, using 5628k, total 5625k
[    1.382639] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.382639] efifb: scrolling: redraw
[    1.382640] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.382725] Console: switching to colour frame buffer device 200x56
[    1.382747] fb0: EFI VGA frame buffer device
[    1.382753] intel_idle: MWAIT substates: 0x21120
[    1.382754] intel_idle: v0.4.1 model 0x3A
[    1.383020] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.464067] ACPI: AC Adapter [ACAD] (on-line)
[    1.464133] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.464142] ACPI: Power Button [PWRB]
[    1.464201] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.464309] ACPI: Lid Switch [LID0]
[    1.464351] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.464360] ACPI: Sleep Button [SLPB]
[    1.464390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.464473] ACPI: Power Button [PWRF]
[    1.465097] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.465198] thermal LNXTHERM:00: registered as thermal_zone0
[    1.465199] ACPI: Thermal Zone [TZ00] (28 C)
[    1.465512] thermal LNXTHERM:01: registered as thermal_zone1
[    1.465513] ACPI: Thermal Zone [TZ01] (39 C)
[    1.465542] GHES: HEST is not enabled!
[    1.465663] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.744028] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.744060] ACPI: Battery Slot [BAT1] (battery present)
[    1.744269] Linux agpgart interface v0.103
[    1.746509] loop: module loaded
[    1.746643] libphy: Fixed MDIO Bus: probed
[    1.746644] tun: Universal TUN/TAP device driver, 1.6
[    1.746678] PPP generic driver version 2.4.2
[    1.746715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.746718] ehci-pci: EHCI PCI platform driver
[    1.746826] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.746833] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.746846] ehci-pci 0000:00:1a.0: debug port 2
[    1.750740] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.750752] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[    1.764023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.764054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.764055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.764056] usb usb1: Product: EHCI Host Controller
[    1.764058] usb usb1: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[    1.764059] usb usb1: SerialNumber: 0000:00:1a.0
[    1.764190] hub 1-0:1.0: USB hub found
[    1.764195] hub 1-0:1.0: 2 ports detected
[    1.764391] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.764395] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.764405] ehci-pci 0000:00:1d.0: debug port 2
[    1.768317] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.768327] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[    1.784019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.784043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.784044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.784045] usb usb2: Product: EHCI Host Controller
[    1.784046] usb usb2: Manufacturer: Linux 4.13.0-32-generic ehci_hcd
[    1.784047] usb usb2: SerialNumber: 0000:00:1d.0
[    1.784173] hub 2-0:1.0: USB hub found
[    1.784177] hub 2-0:1.0: 2 ports detected
[    1.784272] ehci-platform: EHCI generic platform driver
[    1.784280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.784283] ohci-pci: OHCI PCI platform driver
[    1.784289] ohci-platform: OHCI generic platform driver
[    1.784294] uhci_hcd: USB Universal Host Controller Interface driver
[    1.784396] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.784400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.785485] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.785490] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.785566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.785567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.785568] usb usb3: Product: xHCI Host Controller
[    1.785569] usb usb3: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
[    1.785570] usb usb3: SerialNumber: 0000:00:14.0
[    1.785685] hub 3-0:1.0: USB hub found
[    1.785693] hub 3-0:1.0: 4 ports detected
[    1.785956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.785958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.785986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.785987] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.785988] usb usb4: Product: xHCI Host Controller
[    1.785989] usb usb4: Manufacturer: Linux 4.13.0-32-generic xhci-hcd
[    1.785990] usb usb4: SerialNumber: 0000:00:14.0
[    1.786132] hub 4-0:1.0: USB hub found
[    1.786140] hub 4-0:1.0: 4 ports detected
[    1.786435] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.796939] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.796942] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.797108] mousedev: PS/2 mouse device common for all mice
[    1.797452] rtc_cmos 00:02: RTC can wake from S4
[    1.797574] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.797599] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.797604] i2c /dev entries driver
[    1.797639] device-mapper: uevent: version 1.0.3
[    1.797692] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.797696] intel_pstate: Intel P-state driver initializing
[    1.798294] ledtrig-cpu: registered to indicate activity on CPUs
[    1.798295] EFI Variables Facility v0.08 2004-May-17
[    1.809786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.815170] NET: Registered protocol family 10
[    1.818423] Segment Routing with IPv6
[    1.818438] NET: Registered protocol family 17
[    1.818444] Key type dns_resolver registered
[    1.818780] RAS: Correctable Errors collector initialized.
[    1.818804] microcode: sig=0x306a9, pf=0x10, revision=0x15
[    1.818922] microcode: Microcode Update Driver: v2.2.
[    1.819074] sched_clock: Marking stable (1818919334, 0)->(1823251762, -4332428)
[    1.819234] registered taskstats version 1
[    1.819239] Loading compiled-in X.509 certificates
[    1.821153] Loaded X.509 cert 'Build time autogenerated kernel key: ea5b2e3dc303efbb5e4e4f76f9dbd395fda5b554'
[    1.823172] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[    1.823370] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[    1.823385] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.823399] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.823597] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    1.823825] Couldn't get size: 0x800000000000000e
[    1.823827] MODSIGN: Couldn't get UEFI MokListRT
[    1.824232] zswap: loaded using pool lzo/zbud
[    1.826982] Key type big_key registered
[    1.826986] Key type trusted registered
[    1.828205] Key type encrypted registered
[    1.828207] AppArmor: AppArmor sha1 policy hashing enabled
[    1.828209] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.828225] evm: HMAC attrs: 0x1
[    1.828470]   Magic number: 6:812:260
[    1.828567] rtc_cmos 00:02: setting system clock to 2018-02-24 03:17:13 UTC (1519442233)
[    1.828628] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.828628] EDD information not available.
[    1.830373] Freeing unused kernel memory: 2364K
[    1.830374] Write protecting the kernel read-only data: 18432k
[    1.830746] Freeing unused kernel memory: 2024K
[    1.830910] Freeing unused kernel memory: 92K
[    1.832483] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.832483] x86/mm: Checking user space page tables
[    1.833921] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.049852] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.049860] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.050443] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffbb4680c75000, 08:60:6e:8c:2a:1f, XID 0c900800 IRQ 25
[    2.050444] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.051451] ahci 0000:00:1f.2: version 3.0
[    2.051639] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.061733] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.061735] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    2.065863] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.072493] scsi host0: ahci
[    2.072623] scsi host1: ahci
[    2.072721] scsi host2: ahci
[    2.072860] scsi host3: ahci
[    2.072942] scsi host4: ahci
[    2.073031] scsi host5: ahci
[    2.073081] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 26
[    2.073082] ata2: DUMMY
[    2.073084] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 26
[    2.073084] ata4: DUMMY
[    2.073085] ata5: DUMMY
[    2.073085] ata6: DUMMY
[    2.076593] MXM: GUID detected in BIOS
[    2.076629] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    2.076641] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
[    2.076781] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    2.076832] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
[    2.076957] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    2.076960] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    2.076969] [drm] Memory usable by graphics device = 2048M
[    2.076971] checking generic (d0000000 57f000) vs hw (d0000000 10000000)
[    2.076971] fb: switching to inteldrmfb from EFI VGA
[    2.076973] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    2.076997] Console: switching to colour dummy device 80x25
[    2.077064] [drm] Replacing VGA console driver
[    2.077107] nouveau 0000:01:00.0: NVIDIA GF108 (0c1180a1)
[    2.082063] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.082064] [drm] Driver supports precise vblank timestamp query.
[    2.092027] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.095462] nouveau 0000:01:00.0: bios: version 70.08.be.00.08
[    2.095941] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.112028] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.203413] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    2.240464] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.240465] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.240743] hub 1-1:1.0: USB hub found
[    2.240812] hub 1-1:1.0: 6 ports detected
[    2.260472] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.260473] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.260918] hub 2-1:1.0: USB hub found
[    2.261108] hub 2-1:1.0: 6 ports detected
[    2.340197] vga_switcheroo: enabled
[    2.340392] [TTM] Zone  kernel: Available graphics memory: 4021444 kiB
[    2.340392] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.340393] [TTM] Initializing pool allocator
[    2.340396] [TTM] Initializing DMA pool allocator
[    2.340415] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    2.340416] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.340419] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.340421] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.340431] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    2.340432] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000
[    2.352188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.352189] [drm] Driver supports precise vblank timestamp query.
[    2.387078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.390302] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    2.392390] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.392393] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.392395] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.397696] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
[    2.397698] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.400809] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    2.400815] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[    2.403132] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.403135] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.403136] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.408434] ata1.00: configured for UDMA/133
[    2.408659] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
[    2.449542] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff970cda03d800
[    2.452186] Console: switching to colour frame buffer device 128x48
[    2.452198] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.488343] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.488502] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    2.488505] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.488571] sd 0:0:0:0: [sda] Write Protect is off
[    2.488572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.488703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.492149] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    2.492726] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.492845] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.493397] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    2.493667] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input7
[    2.494090] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.494254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    2.506385] fbcon: inteldrmfb (fb1) is primary device
[    2.506386] fbcon: Remapping primary device, fb1, to tty 1-63
[    2.528115] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.562696]  sda: sda1 sda2 sda3
[    2.563682] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.649244] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[    2.649246] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.649247] usb 1-1.3: Product: USB2.0-CRW
[    2.649248] usb 1-1.3: Manufacturer: Generic
[    2.649248] usb 1-1.3: SerialNumber: 20090516388200000
[    2.658243] usbcore: registered new interface driver usb-storage
[    2.659233] usbcore: registered new interface driver uas
[    2.660175] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[    2.679826] scsi host6: usb-storage 1-1.3:1.0
[    2.679911] usbcore: registered new interface driver ums-realtek
[    2.736122] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.803394] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.806433] ata3.00: ATAPI: HL-DT-ST DVDRAM GT70N, AS00, max UDMA/133
[    2.809596] ata3.00: configured for UDMA/133
[    2.812596] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT70N     AS00 PQ: 0 ANSI: 5
[    2.826644] sr 2:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.826647] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.826860] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.826928] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.889764] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b354
[    2.889765] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.889766] usb 1-1.4: Product: USB2.0 HD UVC WebCam
[    2.889767] usb 1-1.4: Manufacturer: Chicony
[    2.894850] usb 1-1.3: USB disconnect, device number 3
[    3.152809] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    3.171717] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    3.194468] psmouse serio1: elantech: Elan sample query result 05, 24, 64
[    3.301029] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    3.308266] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[    3.420344] clocksource: Switched to clocksource tsc
[    7.863739] random: crng init done
[    8.216038] raid6: sse2x1   gen()  8795 MB/s
[    8.264037] raid6: sse2x1   xor()  7126 MB/s
[    8.312036] raid6: sse2x2   gen() 11124 MB/s
[    8.360035] raid6: sse2x2   xor()  7863 MB/s
[    8.408034] raid6: sse2x4   gen() 13041 MB/s
[    8.456032] raid6: sse2x4   xor()  9626 MB/s
[    8.456033] raid6: using algorithm sse2x4 gen() 13041 MB/s
[    8.456034] raid6: .... xor() 9626 MB/s, rmw enabled
[    8.456034] raid6: using ssse3x2 recovery algorithm
[    8.456951] xor: automatically using best checksumming function   avx       
[    8.468427] Btrfs loaded, crc32c=crc32c-intel
[   16.938405] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   18.356013] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   18.356183] systemd[1]: Detected architecture x86-64.
[   18.367023] systemd[1]: Set hostname to <hammer>.
[   21.096621] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   21.096717] systemd[1]: Listening on Journal Socket (/dev/log).
[   21.096787] systemd[1]: Listening on Journal Audit Socket.
[   21.096812] systemd[1]: Listening on Syslog Socket.
[   21.096824] systemd[1]: Reached target User and Group Name Lookups.
[   21.096912] systemd[1]: Created slice System Slice.
[   21.096960] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   22.374793] lp: driver loaded but no devices found
[   22.603278] ppdev: user-space parallel port driver
[   36.183262] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   36.244692] systemd-journald[439]: Received request to flush runtime journal from PID 1
[   36.608835] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input9
[   36.770596] asus_wmi: ASUS WMI generic driver loaded
[   36.771625] asus_wmi: Initialization: 0x1
[   36.771662] asus_wmi: BIOS WMI version: 7.8
[   36.771694] asus_wmi: SFUN value: 0x4a0077
[   36.772215] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[   36.772660] asus_wmi: Number of fans: 0
[   36.840506] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[   36.840512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.840515] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   36.840519] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170531/utaddress-247)
[   36.840523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.840523] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   36.840527] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170531/utaddress-247)
[   36.840530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.840531] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[   36.840534] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170531/utaddress-247)
[   36.840537] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   36.840538] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   36.840567] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.859913] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   36.859915] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   36.859915] RAPL PMU: hw unit of domain package 2^-16 Joules
[   36.859915] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules


teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Wed Feb 28, 2018 9:57 pm

So this is ongoing....I almost thought I had it fixed reading about a very similar issue on an Ubuntu forrum. Bottom line, it sounds hardware related as the the poster has a UEFI style bios like mine...I disabled secure boot and now I get an entirely new error message

https://www.dropbox.com/s/qur3q05ph76cz ... 1.png?dl=0

This may take a while...one issue seems to lead the next and I'm still slowly learning. but will keep trying and will post if/when resolved. https://askubuntu.com/questions/760671/ ... keep-secur

Mattyboy
Level 6
Level 6
Posts: 1196
Joined: Thu Mar 26, 2015 2:17 pm

Re: Virtual Box errors

Post by Mattyboy » Wed Feb 28, 2018 11:31 pm

Go here, read the thread. It's the same 'problem'.

viewtopic.php?f=90&t=264285&p=1433731#p1433731

Take note of
Marziano wrote:
Tue Feb 20, 2018 8:11 am
I would run sudo apt-get remove --purge --autoremove virtualbox{,-\*} as suggested by @Termy to get rid of the installed VB and every other residue.
and
Mattyboy wrote:
Tue Feb 20, 2018 7:27 am
You have residual files relating to the old package on your system, I had the exact same problem until a cleaned everything out.

Once you've removed everything re-boot and install the downloaded version again make sure you're using the version for Ubuntu 16.04 and also make sure you're using the 4.13.0-36--generic kernel.

User avatar
AZgl1500
Level 9
Level 9
Posts: 2860
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: Virtual Box errors

Post by AZgl1500 » Thu Mar 01, 2018 1:23 am

I must have tried 3 or 4 times to get VB installed correctly.

and this code was a tremendous tool in ridding the bad attempts

sudo apt-get remove --purge --autoremove virtualbox{,-\*}

I had to give up on the VB that is available in Support Manager and download it directly from Oracle's website.
For the 18.3 Cinnamon we want the Xenial version AMD64, the i386 version locked up on me.
Ubuntu 16.04 ("Xenial") i386 | AMD64

https://www.virtualbox.org/wiki/Linux_Downloads


Also, you should use the 5.2.7 Guest Additions, not the older 5.2.6 version.
I can't find the download link for that right now, if you need it, PM me and I will give you a link to download it from my server.

Cosmo.
Level 23
Level 23
Posts: 17824
Joined: Sat Dec 06, 2014 7:34 am

Re: Virtual Box errors

Post by Cosmo. » Thu Mar 01, 2018 6:51 am

AZgl1500 wrote:
Thu Mar 01, 2018 1:23 am
Also, you should use the 5.2.7 Guest Additions, not the older 5.2.6 version.
I can't find the download link for that right now,
It is available from the main download page of virtualbox, near the top. Better said: This was there. In the meantime new versions for VB 5.2 and 5.1 are available, so that the guest addition problem is no longer relevant.

User avatar
AZgl1500
Level 9
Level 9
Posts: 2860
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: Virtual Box errors

Post by AZgl1500 » Thu Mar 01, 2018 12:05 pm

Cosmo. wrote:
Thu Mar 01, 2018 6:51 am

It is available from the main download page of virtualbox, near the top. Better said: This was there. In the meantime new versions for VB 5.2 and 5.1 are available, so that the guest addition problem is no longer relevant.
Question on VB 5.2.8 reference what I have now is 5.2.6

Can the newer version be installed over the older version, or should the older version be removed and the new version installed?

If the latter is done, will the current Guest addition OS installs remain intact?

Cosmo.
Level 23
Level 23
Posts: 17824
Joined: Sat Dec 06, 2014 7:34 am

Re: Virtual Box errors

Post by Cosmo. » Thu Mar 01, 2018 4:32 pm

In case of minor version changes, i. e in x.y.z only z is changed, the new version can be installed on top of the existing one. If x or y have been changed, the old version must get removed at first (and for preventing trouble I recommend to reboot before installing the new one.

Regarding guest additions: They can in every case get installed / updated on top of the existing ones. Only if a version of the guest additions from the official repositories are installed (this is by default the case for all Mints up to inclusive 18.2) they have to get removed at first and the VM afterwards rebooted before the new gust additions get installed; this is a one time task.

User avatar
AZgl1500
Level 9
Level 9
Posts: 2860
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: Virtual Box errors

Post by AZgl1500 » Thu Mar 01, 2018 4:42 pm

Thank you very much for that succinct reply.

teddy ballgame
Level 1
Level 1
Posts: 7
Joined: Sat Feb 17, 2018 3:46 pm

Re: Virtual Box errors

Post by teddy ballgame » Sun Mar 04, 2018 9:29 pm

Yeah baby! Muchos gracias AZgl1500. Guest additions install did the trick. TB

Post Reply

Return to “Software & Applications”