using the command:
Code: Select all
Code: Select all
System: Host: Wings-of-Sardior Kernel: 4.15.0-43-generic x86_64 bits: 64 gcc: 7.3.0 Desktop: Cinnamon 3.8.9 (Gtk 3.22.30-1ubuntu1) Distro: Linux Mint 19 Tara Machine: Device: portable System: Dell product: Latitude E4300 serial: N/A Mobo: Dell model: 0D201R serial: N/A BIOS: Dell v: A26 date: 06/04/2013 Battery BAT0: charge: 62.7 Wh 120.5% condition: 52.0/62.7 Wh (83%) model: Samsung SDI DELL J163809 status: Full CPU: Dual core Intel Core2 Duo P9400 (-MCP-) arch: Penryn rev.10 cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 9576 clock speeds: max: 2401 MHz 1: 2394 MHz 2: 2394 MHz Graphics: Card: Intel Mobile 4 Series Integrated Graphics Controller bus-ID: 00:02.0 Display Server: x11 (X.Org 1.19.6 ) drivers: modesetting (unloaded: fbdev,vesa) Resolution: firstname.lastname@example.org OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express version: 2.1 Mesa 18.0.5 Direct Render: Yes Audio: Card Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic Network: Card-1: Intel 82567LM Gigabit Network Connection driver: e1000e v: 3.2.6-k port: efe0 bus-ID: 00:19.0 IF: enp0s25 state: down mac: <filter> Card-2: Broadcom Limited BCM4322 802.11a/b/g/n Wireless LAN Controller driver: wl bus-ID: 0c:00.0 IF: wlp12s0 state: up mac: <filter> Drives: HDD Total Size: 656.2GB (33.6% used) ID-1: /dev/sda model: ST9320325AS size: 320.1GB ID-2: /dev/sdb model: ST3320620AS size: 320.1GB ID-3: USB /dev/sdc model: USB_Flash_Drive size: 16.0GB Partition: ID-1: / size: 293G used: 182G (66%) fs: ext4 dev: /dev/sda1 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 83.0C mobo: N/A Fan Speeds (in rpm): cpu: N/A Info: Processes: 200 Uptime: 42 min Memory: 2195.3/3897.7MB Init: systemd runlevel: 5 Gcc sys: 7.3.0 Client: Shell (bash 4.4.191) inxi: 2.3.56
I have another hard drive with Linux Mint 19.1 xfe on it and it does the same thing. If it were a hardware problem I would expect that the installation media wouldn't work. Both installations (cinnamon and xfe) will not load gparted, yet the installation media will. Now I will go to the installation media and make the changes to the eSATA hard drive (format and repartition) for TimeShift to work.
For those who are asking about "what I'm using it for" it really is none of your business. However as I stated above, I need to format a drive for "Timeshift". Timeshift will not work with an MSDos, FAT32, or HFS drive, of which I have all three for different computers. Currently I have an eSATA drive adaptor which I can just plug in any SATA drive and do what I want with it. I don't need advice about whether or not I should use the program. It Is Necessary! That is all you need to know.
Very frustrating... still not working...