NVIDIA driver fails to install LM19.3

Questions about applications and software
Forum rules
Before you post please read how to get help
Post Reply
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

NVIDIA driver fails to install LM19.3

Post by krustybaguette »

SOLVED UPGRADED TO LM20 My system Lenovo T-520 8GB RAM two disk drives; 128 Samsung SSD boot drive & 1 TB WD Black in multi-bay adapter designated as /home

Currently running Linux Mint 19.3 after experimentation with LM20 Cinnamon.

Experiment with LM20 had mixed results. Toward the end of the installation I was given the opportunity (or challenge) to install NVIDIA driver. It installed successfully and for the first time I was able to employ dual monitors. However I hadn't setup the installation properly and ended up with a Home on my boot drive. At first I thought I had blown up all the data on my second drive. After discovering a new "device" on my desktop which turned out to be my second hard drive, I was relieved to discover that I hadn't lost any data. I had merely "misplaced" it. The thread through which I was able to "relocate" my /home is at
viewtopic.php?f=46&t=323761

Part of the solution was to revert to LM1https://forums.linuxmint.com/viewtopic.php?f=46&t=3237619.3 which I did and successfully set my HOME as that second hard drive. At the end of the installation I also saw the invitation to install the NVIDIA driver, which I attempted but when all was said and done I was notified that there were three broken packages that were unidentified. Using the synaptic to search for the broken files I eventually discovered they all pertain to the NVIDIA driver (nvidia-driver-390 and libnvidia-ifrl-390) libnvidia-ifrl-390:i386 was among the broken files but eventually was removed and installed but without the other two I am still unable to use dual monitors.

My dilemna is do I dare to do yet another update to LM20 after getting everything else working fine under 19.3? Or, is there a solution to getting those drivers installed opening me up to using two monitors. In Covid-19 time I am on ZOOM meetings just about every day and ofter with large groups I would find it helpful to display ZOOM on the second monitor while using other apps on my 15.6" laptop screen.

I've tried changing my display settings in my BIOS and wonder if I should consider flashing BIOS with a much more recent one that is available. Lenovo website shows driver for i386 and x64 but only to support Windows operating systems. My T-520 began life as a Windows 7 machine. Also I've read a bit on using NVIDIA OPTIMA driver, but the one I had recommended by Mint Driver manager is for NVIDIA Quadro.

I hope someone out there is familiar enough with this scenario that they can advise me on steps to take. I'd be happy to NOT have to flash my BIOS but willing to chance it if needed.

Thanks in advance to the Mint Community which has helped me often since my first Mint installation back around LM9 or so.

krustybaguette
Last edited by krustybaguette on Tue Jul 14, 2020 9:06 pm, edited 1 time in total.
User avatar
Kadaitcha Man
Level 9
Level 9
Posts: 2588
Joined: Mon Aug 27, 2012 10:17 pm

Re: NVIDIA driver fails to install LM19.3

Post by Kadaitcha Man »

krustybaguette wrote:
Fri Jul 10, 2020 9:43 am
I hope someone out there is familiar enough with this scenario that they can advise me on steps to take.
Wannabe surgeons really shouldn't diagnose themselves :)

https://www.linuxmint.com/rel_tricia_cinnamon.php

See Solving freezes during the boot sequence.
It's pronounced kad-eye-cha, not kada-itcha.
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

Re: NVIDIA driver fails to install LM19.3

Post by krustybaguette »

Kadaitcha Man wrote:
Fri Jul 10, 2020 9:46 am
krustybaguette wrote:
Fri Jul 10, 2020 9:43 am
I hope someone out there is familiar enough with this scenario that they can advise me on steps to take.
Wannabe surgeons really shouldn't diagnose themselves :)

https://www.linuxmint.com/rel_tricia_cinnamon.php

See Solving freezes during the boot sequence.
I'm trying to solve a specific problem and you send me the release notes covering the whole ball of wax ???? I did spot a couple of interesting items in there but nothing dealing with my specific problem. My problem is not freezing during the boot sequence.

krusty
User avatar
Kadaitcha Man
Level 9
Level 9
Posts: 2588
Joined: Mon Aug 27, 2012 10:17 pm

Re: NVIDIA driver fails to install LM19.3

Post by Kadaitcha Man »

krustybaguette wrote:
Fri Jul 10, 2020 1:26 pm
I'm trying to solve a specific problem and you send me the release notes covering the whole ball of wax ????
You are "trying to solve a specific problem" by using your own faulty diagnosis. I'll leave you to it. Good luck sorting it out yourself.
It's pronounced kad-eye-cha, not kada-itcha.
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

Re: NVIDIA driver fails to install LM19.3

Post by krustybaguette »

Kadaitcha Man wrote:
Fri Jul 10, 2020 7:02 pm
krustybaguette wrote:
Fri Jul 10, 2020 1:26 pm
I'm trying to solve a specific problem and you send me the release notes covering the whole ball of wax ????
You are "trying to solve a specific problem" by using your own faulty diagnosis. I'll leave you to it. Good luck sorting it out yourself.
Not at all. In the other thread cited in been consulting lots of sources for the solution to my problem. In my first post on this subject instead of offering constructive criticism you simply showed me that you're more interested in criticizing without being constructive. Fortunately I spotted tendency that in the other thread linked in the first post of this thread so I continued the conversation with a very helpful listmember, who helped me get 19.3 reinstalled properly with partitions the way I wanted them not the way you had suggested. (That doesn't mean your partitioning scheme was wrong, it just wasn't what I wanted.)
Since this new issue of the NVIDIA driver failing to install in LM19.3 I was following the suggestion to wait until LM20 was a bit more estaablished and then to update to LM20 via the Update Manager. Since the whole driver issue involves three broken pieces I thought it was worth the effort to fix those broken pieces. Didn't work. Nor did making changes in BIOS display options.
So day before yesterday I decided that a fresh install of LM 20 w/Cinnamon would be a place to start. Made sure to keep it simple. LM20 Ulyana on sda and sdb devoted to /home and NOT formatted. Install was successful as was restoring WINE, and various progams. Last challenge was to see if installing nvidia-driver-390 from Synaptic would solve my problem with dual monitors. Install was good and after a little while I was able to use menu/preferences/display to find my laptop display and TV monitor.
I appreciate the efforts of forum members to help but am glad I was able to figure out the solution by looking outside LM Forums and using the experience gained when I had to regress to LM 19.3 temporarily.
Last edited by krustybaguette on Wed Jul 15, 2020 1:50 pm, edited 1 time in total.
User avatar
zcot
Level 6
Level 6
Posts: 1002
Joined: Wed Oct 19, 2016 6:08 pm

Re: NVIDIA driver fails to install LM19.3

Post by zcot »

put up your info. It's utterly impossible to think about a solution given nvidia-390 being the only potentially relative info.

check up in the red section at the top.
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

Re: NVIDIA driver fails to install LM19.3

Post by krustybaguette »

Perhaps my original post on this topic was a case of TMI. The recommendation to install the Nvidia 390 driver came at the end of the re-installation of 19.3 and concluded by announcing that the installation had failed mentioning that there were 3 broken packages but did not identify them. Through painstaking research using synaptic filter for broken packages I discovered their names. They are also mentioned in that original post you. However nothing I have done has been able to install them. I have tried using synaptic. I've tried installing them in a terminal. I've tried installing the driver starting at Driver Manager.
(nvidia-driver-390, libnvidia-ifrl-390, libnvidia-ifrl-390:i386) are the broken files.
The details of my machine and history of previous install of LM20, and more are all in my OP. This includes the reason why I decided to revert to 19.3 even though the NVIDIA driver had installed and enabled dual monitors during the time LM 20 was installed. Thanks for looking to help.
krusty
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

Re: NVIDIA driver fails to install LM19.3

Post by krustybaguette »

zcot wrote:
Fri Jul 10, 2020 10:52 pm
put up your info. It's utterly impossible to think about a solution given nvidia-390 being the only potentially relative info.

check up in the red section at the top.
system information is in the OP

After running fix broken files result:

(Reading database ... 297620 files and directories currently installed.)
Preparing to unpack .../libnvidia-gl-390_390.138-0ubuntu0.18.04.1_i386.deb ...
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/i386-linux-gnu/libGL.so.1.distrib by nvidia-340
dpkg-divert: error: mismatch on package
when removing 'diversion of /usr/lib/i386-linux-gnu/libGL.so.1 by libnvidia-gl-390'
found 'diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/i386-linux-gnu/libGL.so.1.distrib by nvidia-340'
dpkg: error processing archive /var/cache/apt/archives/libnvidia-gl-390_390.138-0ubuntu0.18.04.1_i386.deb (--unpack):
new libnvidia-gl-390:i386 package pre-installation script subprocess returned error exit status 2
Preparing to unpack .../libnvidia-gl-390_390.138-0ubuntu0.18.04.1_amd64.deb ...
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/x86_64-linux-gnu/libGL.so.1.distrib by nvidia-340
dpkg-divert: error: mismatch on package
when removing 'diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 by libnvidia-gl-390'
found 'diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/x86_64-linux-gnu/libGL.so.1.distrib by nvidia-340'
dpkg: error processing archive /var/cache/apt/archives/libnvidia-gl-390_390.138-0ubuntu0.18.04.1_amd64.deb (--unpack):
new libnvidia-gl-390:amd64 package pre-installation script subprocess returned error exit status 2
Errors were encountered while processing:
/var/cache/apt/archives/libnvidia-gl-390_390.138-0ubuntu0.18.04.1_i386.deb
/var/cache/apt/archives/libnvidia-gl-390_390.138-0ubuntu0.18.04.1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install. Trying to recover:
dpkg: dependency problems prevent configuration of nvidia-driver-390:
nvidia-driver-390 depends on libnvidia-gl-390 (= 390.138-0ubuntu0.18.04.1); however:
Package libnvidia-gl-390:amd64 is not installed.

dpkg: error processing package nvidia-driver-390 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libnvidia-ifr1-390:amd64:
libnvidia-ifr1-390:amd64 depends on libnvidia-gl-390; however:
Package libnvidia-gl-390:amd64 is not installed.

dpkg: error processing package libnvidia-ifr1-390:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libnvidia-ifr1-390:i386:
libnvidia-ifr1-390:i386 depends on libnvidia-gl-390; however:
Package libnvidia-gl-390:i386 is not installed.

dpkg: error processing package libnvidia-ifr1-390:i386 (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.27-3ubuntu1) ...
Errors were encountered while processing:
nvidia-driver-390
libnvidia-ifr1-390:amd64
libnvidia-ifr1-390:i386

Here is where those files exist on my system, or something that looks like them. why is "_390.138-0ubuntu0.18.04.1_" inserted in each of the file names before :amd64 and :i386 and for the nvidia-driver-390 "390.138-0ubuntu0.18.04.1_amd64.deb" is added.

/var/cache/apt/archives/nvidia-driver-390_390.138-0ubuntu0.18.04.1_amd64.deb why not just "nvidia-driver-390"?
/var/cache/apt/archives/libnvidia-ifr1-390_390.138-0ubuntu0.18.04.1_amd64.deb why not just "libnvidia-ifr1-390:amd64"
/var/cache/apt/archives/libnvidia-ifr1-390_390.138-0ubuntu0.18.04.1_i386.deb why not just " libnvidia-ifr1-390:i386"

I've drilled down and found the culprit files but nothing seems to fix them. Could it be that I have to delete them manually before trying to install the driver again?

Do I dare to take the leap back to LM20 and hope it will install properly with the upgrade. As mentioned in my OP I had installed LM20 and at the end of the process I was recommended to install the INVIDIA driver that doesn't seem to want to be installed in LM19.3 With the NVIDIA driver installed on LM20 I was able to run a second monitor via HDMI. Without that driver I cannot run my second screen.
User avatar
zcot
Level 6
Level 6
Posts: 1002
Joined: Wed Oct 19, 2016 6:08 pm

Re: NVIDIA driver fails to install LM19.3

Post by zcot »

Code: Select all

for FILE in $(dpkg-divert --list | grep nvidia-340 | awk '{print $3}'); do sudo dpkg-divert --remove $FILE; done
and apt purge nvidia* I believe this will clear every problem out, you reboot to nouveau.

That might be in a good position but actually don't know cause still went digging for system info and never did see, but at the least that shouldn't be a system killer but at least good clean starting point.

Good luck.
krustybaguette
Level 3
Level 3
Posts: 151
Joined: Thu Mar 31, 2011 8:24 am

Re: NVIDIA driver fails to install LM19.3

Post by krustybaguette »

zcot wrote:
Mon Jul 13, 2020 9:55 pm

Code: Select all

for FILE in $(dpkg-divert --list | grep nvidia-340 | awk '{print $3}'); do sudo dpkg-divert --remove $FILE; done
and apt purge nvidia* I believe this will clear every problem out, you reboot to nouveau.

That might be in a good position but actually don't know cause still went digging for system info and never did see, but at the least that shouldn't be a system killer but at least good clean starting point.

Good luck.
I tried getting rid of all the diversions to nvidia-340 and after installing missing libnvidia-390 items based upon a how-to on ubuntu forum. Message #4 in the thread is what I did and it seemed successful. https://ubuntuforums.org/showthread.php ... st13797330 I also installed the nvidia-driver-390 however I believe it should have installed nvidia-driver-390:i386 or some such to support i386 architecture/apps.

Here is the system information as complete as I can find under "System Reports" System:

Host: kenneth-ThinkPad-T520 Kernel: 5.4.0-40-generic x86_64 bits: 64 compiler: gcc
v: 7.5.0 Desktop: Cinnamon 4.4.8 wm: muffin dm: LightDM Distro: Linux Mint 19.3 Tricia
base: Ubuntu 18.04 bionic
Machine: Type: Laptop System: LENOVO product: 424049U v: ThinkPad T520 serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: LENOVO model: 424049U serial: <filter> UEFI [Legacy]: LENOVO v: 8AET56WW (1.36 )
date: 12/06/2011
Battery: ID-1: BAT0 charge: 47.5 Wh condition: 47.5/56.2 Wh (85%) volts: 12.3/10.8
model: LGC 42T4911 serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter> charge: 55%
status: Discharging
CPU: Topology: Dual Core model: Intel Core i5-2520M bits: 64 type: MT MCP arch: Sandy Bridge
rev: 7 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19936
Speed: 3034 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 3050 2: 2997 3: 2990
4: 2990
Graphics: Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Lenovo
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0126
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2) v: 3.3 Mesa 20.0.8
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Lenovo ThinkPad T520 driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1c20
Sound Server: ALSA v: k5.4.0-40-generic
Network: Device-1: Intel 82579LM Gigabit Network vendor: Lenovo ThinkPad T520 driver: e1000e
v: 3.2.6-k port: 5060 bus ID: 00:19.0 chip ID: 8086:1502
IF: enp0s25 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel
port: 5080 bus ID: 03:00.0 chip ID: 8086:0085
IF: wlp3s0 state: up mac: <filter>
Drives: Local Storage: total: 1.03 TiB used: 412.60 GiB (39.3%)
ID-1: /dev/sda vendor: Micron model: C300-MTFDBAK128MAG size: 119.24 GiB
speed: 3.0 Gb/s serial: <filter>
ID-2: /dev/sdb vendor: Western Digital model: WD10JPLX-00MBPT0 size: 931.51 GiB
speed: 6.0 Gb/s serial: <filter>
Partition: ID-1: / size: 116.87 GiB used: 13.23 GiB (11.3%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 916.77 GiB used: 399.37 GiB (43.6%) fs: ext4 dev: /dev/sdb1
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Device-1: 1-1.2:3 info: Logitech Unifying Receiver type: Mouse,HID
driver: logitech-djreceiver,usbhid rev: 2.0 chip ID: 046d:c52f
Device-2: 1-1.3:4 info: Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
type: <vendor specific> driver: N/A rev: 1.0 chip ID: 147e:2016
Device-3: 1-1.4:5 info: Broadcom BCM2045B (BDC-2.1) type: Bluetooth driver: btusb
rev: 2.0 chip ID: 0a5c:217f
Device-4: 1-1.6:6 info: Chicony Lenovo Integrated Camera (0.3MP) type: Video
driver: uvcvideo rev: 2.0 chip ID: 04f2:b217
Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
chip ID: 8087:0024
Device-5: 2-1.1:3 info: Broadcom BCM20702A0 Bluetooth 4.0 type: <vendor specific>
driver: btusb rev: 2.0 chip ID: 0a5c:21e8
Sensors: System Temperatures: cpu: 58.0 C mobo: N/A
Fan Speeds (RPM): cpu: 1952
Repos: Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com tricia main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu bionic main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu bionic-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ bionic partner
Info: Processes: 218 Uptime: 18m Memory: 7.66 GiB used: 1.15 GiB (15.0%) Init: systemd v: 237
runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: Unknown python3.6 client inxi: 3.0.32
User avatar
AZgl1500
Level 13
Level 13
Posts: 4869
Joined: Thu Dec 31, 2015 3:20 am
Location: Oklahoma where the wind comes sweeping down the plains
Contact:

Re: NVIDIA driver fails to install LM19.3

Post by AZgl1500 »

Hey,
pretty please, always use the code brackets when you post your system and other info.

the way you did it spreads it several screens and makes it extremely difficult to follow, because it is not tabbed out like we like to see it.

I just copied your info, and placed it in the </> code brackets

Code: Select all

Host: kenneth-ThinkPad-T520 Kernel: 5.4.0-40-generic x86_64 bits: 64 compiler: gcc
v: 7.5.0 Desktop: Cinnamon 4.4.8 wm: muffin dm: LightDM Distro: Linux Mint 19.3 Tricia
base: Ubuntu 18.04 bionic
Machine: Type: Laptop System: LENOVO product: 424049U v: ThinkPad T520 serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: LENOVO model: 424049U serial: <filter> UEFI [Legacy]: LENOVO v: 8AET56WW (1.36 )
date: 12/06/2011
Battery: ID-1: BAT0 charge: 47.5 Wh condition: 47.5/56.2 Wh (85%) volts: 12.3/10.8
model: LGC 42T4911 serial: <filter> status: Full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter> charge: 55%
status: Discharging
CPU: Topology: Dual Core model: Intel Core i5-2520M bits: 64 type: MT MCP arch: Sandy Bridge
rev: 7 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19936
Speed: 3034 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 3050 2: 2997 3: 2990
4: 2990
Graphics: Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Lenovo
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0126
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2) v: 3.3 Mesa 20.0.8
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Lenovo ThinkPad T520 driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1c20
Sound Server: ALSA v: k5.4.0-40-generic
Network: Device-1: Intel 82579LM Gigabit Network vendor: Lenovo ThinkPad T520 driver: e1000e
v: 3.2.6-k port: 5060 bus ID: 00:19.0 chip ID: 8086:1502
IF: enp0s25 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel
port: 5080 bus ID: 03:00.0 chip ID: 8086:0085
IF: wlp3s0 state: up mac: <filter>
Drives: Local Storage: total: 1.03 TiB used: 412.60 GiB (39.3%)
ID-1: /dev/sda vendor: Micron model: C300-MTFDBAK128MAG size: 119.24 GiB
speed: 3.0 Gb/s serial: <filter>
ID-2: /dev/sdb vendor: Western Digital model: WD10JPLX-00MBPT0 size: 931.51 GiB
speed: 6.0 Gb/s serial: <filter>
Partition: ID-1: / size: 116.87 GiB used: 13.23 GiB (11.3%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 916.77 GiB used: 399.37 GiB (43.6%) fs: ext4 dev: /dev/sdb1
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Device-1: 1-1.2:3 info: Logitech Unifying Receiver type: Mouse,HID
driver: logitech-djreceiver,usbhid rev: 2.0 chip ID: 046d:c52f
Device-2: 1-1.3:4 info: Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
type: <vendor specific> driver: N/A rev: 1.0 chip ID: 147e:2016
Device-3: 1-1.4:5 info: Broadcom BCM2045B (BDC-2.1) type: Bluetooth driver: btusb
rev: 2.0 chip ID: 0a5c:217f
Device-4: 1-1.6:6 info: Chicony Lenovo Integrated Camera (0.3MP) type: Video
driver: uvcvideo rev: 2.0 chip ID: 04f2:b217
Hub: 2-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
chip ID: 8087:0024
Device-5: 2-1.1:3 info: Broadcom BCM20702A0 Bluetooth 4.0 type: <vendor specific>
driver: btusb rev: 2.0 chip ID: 0a5c:21e8
Sensors: System Temperatures: cpu: 58.0 C mobo: N/A
Fan Speeds (RPM): cpu: 1952
Repos: Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com tricia main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu bionic main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu bionic-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ bionic partner
Info: Processes: 218 Uptime: 18m Memory: 7.66 GiB used: 1.15 GiB (15.0%) Init: systemd v: 237
runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: Unknown python3.6 client inxi: 3.0.32
Linux Mint 19.3 Cinnamon
Post Reply

Return to “Software & Applications”