System report for usrmerge conversion not disappearing even after i installed usrmerge and did a reboot

[zeltron]

I have actually installed usrmerge package using sudo apt install usrmerge and then rebooted my computer since I got a system report to do this thing. But still the report in the system reports to install usrmerge doesn't disappear.
Here is my ls -l / output.

total 76
lrwxrwxrwx 1 root root 7 Dec 18 23:41 bin -> usr/bin
drwxr-xr-x 4 root root 4096 Jan 13 21:31 boot
drwxr-xr-x 2 root root 4096 Dec 18 23:45 cdrom
drwxr-xr-x 23 root root 4920 Jan 14 20:11 dev
drwxr-xr-x 183 root root 12288 Jan 14 14:30 etc
drwxr-xr-x 3 root root 4096 Dec 18 23:46 home
lrwxrwxrwx 1 root root 7 Dec 18 23:41 lib -> usr/lib
drwxr-xr-x 2 root root 4096 Jan 13 22:08 lib32
lrwxrwxrwx 1 root root 9 Dec 18 23:41 lib64 -> usr/lib64
lrwxrwxrwx 1 root root 10 Dec 18 23:41 libx32 -> usr/libx32
drwx------ 2 root root 16384 Dec 18 23:41 lost+found
drwxr-xr-x 3 root root 4096 Dec 19 00:01 media
drwxr-xr-x 2 root root 4096 Jul 3 2021 mnt
drwxr-xr-x 8 root root 4096 Jan 9 11:13 opt
dr-xr-xr-x 368 root root 0 Jan 14 20:10 proc
drwx------ 15 root root 4096 Jan 11 20:31 root
drwxr-xr-x 45 root root 1400 Jan 14 20:16 run
lrwxrwxrwx 1 root root 8 Dec 18 23:41 sbin -> usr/sbin
drwxr-xr-x 2 root root 4096 Jul 3 2021 srv
dr-xr-xr-x 13 root root 0 Jan 14 20:10 sys
drwxrwxrwt 20 root root 4096 Jan 14 20:22 tmp
drwxr-xr-x 14 root root 4096 Dec 19 02:09 usr
drwxr-xr-x 12 root root 4096 Dec 19 03:33 var

Also here is my inxi -Fxiz output just in case you want to read something from it.

System: Kernel: 5.4.0-94-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Cinnamon 5.2.7 Distro: Linux Mint 20.3 Una
base: Ubuntu 20.04 focal
Machine: Type: Laptop System: Dell product: Inspiron 7570 v: N/A serial: <filter>
Mobo: Dell model: 0P1W0W v: A00 serial: <filter> UEFI: Dell v: 1.21.0 date: 10/18/2021
Battery: ID-1: BAT0 charge: 28.2 Wh condition: 32.2/42.0 Wh (77%) model: BYD DELL FW8KR0B status: Charging
Device-1: hid-0018:04F3:2504.0002-battery model: ELAN2097:00 04F3:2504 charge: N/A status: N/A
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A L2 cache: 8192 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31999
Speed: 745 MHz min/max: 400/4000 MHz Core speeds (MHz): 1: 704 2: 744 3: 735 4: 736 5: 732 6: 751 7: 712 8: 713
Graphics: Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0
Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Dell driver: nvidia v: 470.86 bus ID: 01:00.0
Display: x11 server: X.Org 1.20.13 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: NVIDIA GeForce 940MX/PCIe/SSE2 v: 4.6.0 NVIDIA 470.86 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Sound Server: ALSA v: k5.4.0-94-generic
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel port: d000
bus ID: 02:00.0
IF: enp2s0 state: down mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: d000 bus ID: 03:00.0
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: temporary dynamic scope: global
IP v6: <filter> type: dynamic mngtmpaddr noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: docker0 state: down mac: <filter>
IP v4: <filter> scope: global
IF-ID-2: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global
IF-ID-3: virbr0-nic state: down mac: <filter>
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 1.14 TiB used: 316.06 GiB (27.1%)
ID-1: /dev/nvme0n1 vendor: Kingston model: SA2000M8250G size: 232.89 GiB
ID-2: /dev/sda vendor: Seagate model: ST1000LX015-1U7172 size: 931.51 GiB temp: 34 C
Partition: ID-1: / size: 243.73 GiB used: 45.96 GiB (18.9%) fs: ext4 dev: /dev/sda4
ID-2: swap-1 size: 7.54 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3
Sensors: System Temperatures: cpu: 49.0 C mobo: N/A gpu: nvidia temp: 50 C
Fan Speeds (RPM): cpu: 2519
Info: Processes: 306 Uptime: 16m Memory: 7.52 GiB used: 3.86 GiB (51.3%) Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
Shell: fish v: 3.3.1 inxi: 3.0.38

Just wanted to mention one more thing which is that I have upgraded from 20.2 to 20.3 rather than doing a fresh install.

[Fateh1453]

I have the same problem.
Upgraded from 20.2 some week ago.
today the 'perform usrmerge conversion' system report appeared with no way to get rid of it instead ignoring it.
but i don't want to ignore. i want to find out why my system is thinking these directories arent symlinked!

[zeltron]

yeah even i just ignored the report for now. But yeah this seems to be a bug for people who upgrade from 20.2 to 20.3.