[SOLVED] Not sound and found HDMI output

[klas88]

I connect my HDMI to the television, but I do not have the option to choose the HDMI output in options control sound options, therefore I can not hear it on my television. Any solution?

Not HDMI output, only speakrs or speakers with microphone (language galician)

Code: Select all

berkman@berkman-K54C ~ $ inxi -Fxz
System:    Host: berkman-K54C Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) Distro: Linux Mint 18.3 Sylvia
Machine:   System: ASUSTeK (portable) product: K54C v: 1.0
           Mobo: ASUSTeK model: K54C v: 1.0
           Bios: American Megatrends v: K54C.207 date: 04/18/2012
CPU:       Dual core Intel Celeron B815 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 6385
           clock speeds: max: 1600 MHz 1: 1392 MHz 2: 1371 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.00hz, 1024x768@60.00hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile
           GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe
           driver: rt2800pci v: 2.3.0 bus-ID: 02:00.0
           IF: wlp2s0 state: up mac: <filter>
           Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
           driver: atl1c v: 1.0.1.1-NAPI port: a000 bus-ID: 04:00.0
           IF: enp4s0 state: down mac: <filter>
Drives:    HDD Total Size: 750.2GB (84.7% used)
           ID-1: /dev/sda model: Hitachi_HTS54757 size: 750.2GB
Partition: ID-1: / size: 19G used: 16G (87%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 667G used: 575G (91%) fs: ext4 dev: /dev/sda6
           ID-3: swap-1 size: 2.02GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 55.0C mobo: N/A
           Fan Speeds (in rpm): cpu: 2100
Info:      Processes: 175 Uptime: 14 min Memory: 1215.5/3852.0MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35 

Code: Select all

berkman@berkman-K54C ~ $ aplay -l
**** Listaxe de dispositivos de soporte físico PLAYBACK ****
placa 0: PCH [HDA Intel PCH], dispositivo 0: ALC269VB Analog [ALC269VB Analog]
  Subdispositivos: 0/1
  Subdispositivo #0: subdevice #0
placa 0: PCH [HDA Intel PCH], dispositivo 3: HDMI 0 [HDMI 0]
  Subdispositivos: 1/1
  Subdispositivo #0: subdevice #0

-------------------------
SOLVED! I had to run to the [configuration][/b] tab and select stereo digital output (HDMI) (By default analog stereo duplex is selected)

[MrEen]

Hi klas88.

Install and run PulseAudio Volume Control (pavucontrol.) Go to the Configuration tab and select HDMI as the profile there. Double check on the Output Devices tab that HDMI is also selected there.

Hope that helps.

[klas88]

I writed sudo apt-get install pavucontrol and It says I have the latest version already installed (not hdmi output, only speakers and speakers with microphone)

[klas88]

SOLVED! I had to run to the configuration tab and select stereo digital output (HDMI) (By default analog stereo duplex is selected)