Fresh install, no audio from sound card
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Fresh install, no audio from sound card
I had been running Linux Mint 17 for years on the same machine, was working fine earlier today. I installed 19 and I cannot get any sound out of the sound card, an Asus Xonar DG. The HDMI audio running out of the video card (GTX 650ti) works fine. The sound card is hooked to a 5.1 Creative analog speaker setup. The sound menu settings do not work. It sees the sound card but when you select analog output, you get nothing. Volume is turned all the way up on all channels.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: Fresh install, no audio from sound card
Hi famicommander.
I suggest you install and run PulseAudio Volume Control (pavucontrol.) It has more options than the default sound settings.
If you still can't get it working, paste back the results of
Good luck.
I suggest you install and run PulseAudio Volume Control (pavucontrol.) It has more options than the default sound settings.
If you still can't get it working, paste back the results of
inxi -Fxz
and aplay -l
Good luck.
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
No change with the Pulse Audio Volume Control. It shows sound as being played but nothing comes out of the speakers. Here are the outputs of those commands
Code: Select all
jason@jason-EP45-UD3L:~$ inxi -Fxz
System: Host: jason-EP45-UD3L Kernel: 4.15.0-30-generic x86_64
bits: 64 gcc: 7.3.0
Desktop: Cinnamon 3.8.8 (Gtk 3.22.30-1ubuntu1)
Distro: Linux Mint 19 Tara
Machine: Device: desktop Mobo: Gigabyte model: EP45-UD3L v: x.x serial: N/A
BIOS: Award v: F4 date: 02/24/2009
CPU: Quad core Intel Core2 Quad Q9400 (-MCP-)
arch: Penryn rev.10 cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 21330
clock speeds: max: 2667 MHz 1: 1999 MHz 2: 1999 MHz 3: 1999 MHz
4: 1999 MHz
Graphics: Card: NVIDIA GK106 [GeForce GTX 650 Ti] bus-ID: 01:00.0
Display Server: x11 (X.Org 1.19.6 )
drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
Resolution: 3840x2160@60.00hz
OpenGL: renderer: GeForce GTX 650 Ti/PCIe/SSE2
version: 4.6.0 NVIDIA 390.48 Direct Render: Yes
Audio: Card-1 NVIDIA GK106 HDMI Audio Controller
driver: snd_hda_intel bus-ID: 01:00.1
Card-2 C-Media CMI8788 [Oxygen HD Audio]
driver: snd_oxygen port: d000 bus-ID: 05:00.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-30-generic
Network: Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: c000 bus-ID: 04:00.0
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1000.2GB (1.8% used)
ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB temp: 43C
Partition: ID-1: / size: 916G used: 17G (2%) fs: ext4 dev: /dev/sda1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 69.0C mobo: N/A gpu: 0.0:90C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 190 Uptime: 38 min Memory: 1348.8/7976.0MB
Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.191) inxi: 2.3.56
jason@jason-EP45-UD3L:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: DG [Xonar DG], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: DG [Xonar DG], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
jason@jason-EP45-UD3L:~$
Re: Fresh install, no audio from sound card
Okay. Play something with sound and while it's playing get the output of
pacmd list-sinks
and paste that back here.-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
Code: Select all
jason@jason-EP45-UD3L:~$ pacmd list-sinks
2 sink(s) available.
* index: 1
name: <alsa_output.pci-0000_05_00.0.analog-surround-51>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 99957 / 153% / 11.00 dB, front-right: 99957 / 153% / 11.00 dB, rear-left: 99957 / 153% / 11.00 dB, rear-right: 99957 / 153% / 11.00 dB, front-center: 99957 / 153% / 11.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 6ch 44100Hz
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
Surround 5.1
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1981.32 ms
card: 1 <alsa_card.pci-0000_05_00.0>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Multichannel"
alsa.id = "Multichannel"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Xonar DG"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xd000, irq 20"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:05:00.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:05:00.0/sound/card1"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
device.string = "surround51:1"
device.buffering.buffer_size = "1048512"
device.buffering.fragment_size = "1048512"
device.access_mode = "mmap+timer"
device.profile.name = "analog-surround-51"
device.profile.description = "Analog Surround 5.1"
device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Surround 5.1"
alsa.mixer_name = "CMI8786"
alsa.components = "CS4245 CMI8786"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
index: 2
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9030
volume: front-left: 72088 / 110% / 2.48 dB, front-right: 72088 / 110% / 2.48 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 23.17 ms
max request: 4 KiB
max rewind: 64 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 23.22 ms; range is 0.50 .. 371.52 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xe6000000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0b"
device.product.name = "GK106 HDMI Audio Controller"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "GK106 HDMI Audio Controller Digital Stereo (HDMI)"
alsa.mixer_name = "Nvidia GPU 41 HDMI/DP"
alsa.components = "HDA:10de0041,38423059,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "LG TV RVU
"
active port: <hdmi-output-0>
Re: Fresh install, no audio from sound card
It's playing to the HDMI port. You can go to the Configuration tab and turn HDMI to off, and see if that forces it to the analog-surround-51 profile.
While doing this, you can look at the Output Devices tab and the Playback tab to see what you have available.
While doing this, you can look at the Output Devices tab and the Playback tab to see what you have available.
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
No, it's the same result with the HDMI turned on or off. I just turned it on so I could hear something.
Re: Fresh install, no audio from sound card
Okay, on the Output Devices tab, remove the checkmark on the HDMI setting by clicking on it, then test.
Re: Fresh install, no audio from sound card
You could also try
pacmd set-default-sink 1
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
When sound is playing but not heard, what options do you have on the Playback tab of pavucontrol? Click on the box above the volume slider for options.
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
The only options are to lock the channels together or mute/unmute. The volume slider is moving up and down as if there is sound playing but there is none.
Re: Fresh install, no audio from sound card
This is a little weird to me. Your list-sinks showed analog as the default port, but was playing to HDMI.
Go back to the Configuration tab of pavucontrol. Is there another 5.1 setting you can choose there than the one currently selected?
Go back to the Configuration tab of pavucontrol. Is there another 5.1 setting you can choose there than the one currently selected?
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
None that work.
Re: Fresh install, no audio from sound card
This is rather convoluted, but see if this works.
CAUTION: Turn your sound down a little as you try this.
Start a video, then do
Take note of the index number for the analog output here in case it's different.
Now run
Now you can move the audio stream with, in the case of the above,
Does that make it audible?
CAUTION: Turn your sound down a little as you try this.
Start a video, then do
pacmd list-sinks
again. It should return the same beginning section as the first time like this:
Code: Select all
* index: 1
name: <alsa_output.pci-0000_05_00.0.analog-surround-51>
Now run
pacmd list-sink-inputs
to find it's index number, the beginning of which should look like this:
Code: Select all
1 sink input(s) available.
index: 94
driver: <protocol-native.c>
pacmd move-sink-input 94 1
Does that make it audible?
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
Updated to 19.1 today in hopes that it would fix this issue but it hasn't.
My speakers work fine when hooked to other devices, the soundcard is detected, it shows sound as being played, but nothing comes from the speakers.
My speakers work fine when hooked to other devices, the soundcard is detected, it shows sound as being played, but nothing comes from the speakers.
Re: Fresh install, no audio from sound card
Not sure why I didn't get to this last time, but run
Also see if any columns have the word disabled. The up/or down arrows will change that.
Be aware that it's possible that not all columns are displayed. Keep pressing the right arrow key to ensure you can see everything.
Good luck.
alsamixer
in the terminal, and when it opens press F6 to choose the Xonar device. Any columns with MM at the bottom are muted. Use the arrow keys to select columns, and the m key to toggle mute.Also see if any columns have the word disabled. The up/or down arrows will change that.
Be aware that it's possible that not all columns are displayed. Keep pressing the right arrow key to ensure you can see everything.
Good luck.
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
There isn't even a volume bar on the far right one, stereo upmixing (front+surround)MrEen wrote: ⤴Thu Feb 14, 2019 7:24 pm Not sure why I didn't get to this last time, but runalsamixer
in the terminal, and when it opens press F6 to choose the Xonar device. Any columns with MM at the bottom are muted. Use the arrow keys to select columns, and the m key to toggle mute.
Also see if any columns have the word disabled. The up/or down arrows will change that.
Be aware that it's possible that not all columns are displayed. Keep pressing the right arrow key to ensure you can see everything.
Good luck.
There are only seven categories:
headphone (not muted, has volume bar at 62)
s/pdif (muted, no volume bar)
s/pidif loopback (muted, no volume bar)
analog input (muted, has volume bar)
analog output, multichannel (no volume bar, no mute indicator at all, just blank)
digital input (muted, has volume bar)
stereo upmixing, front and surround (no volume bar or mute indicator)
Re: Fresh install, no audio from sound card
Go back to this one and hit the up/down arrow until it says multichannel or similar.famicommander wrote: ⤴Thu Feb 14, 2019 7:37 pm analog output, multichannel (no volume bar, no mute indicator at all, just blank)
-
- Level 1
- Posts: 44
- Joined: Sun Oct 14, 2012 6:09 pm
Re: Fresh install, no audio from sound card
... it does say that. The post you quoted says it.MrEen wrote: ⤴Thu Feb 14, 2019 7:45 pmGo back to this one and hit the up/down arrow until it says multichannel or similar.famicommander wrote: ⤴Thu Feb 14, 2019 7:37 pm analog output, multichannel (no volume bar, no mute indicator at all, just blank)