Code: Select all
salvo@salvo-HP ~ $ sudo alsactl init
[sudo] password di salvo:
Found hardware: "HDA-Intel" "IDT 92HD81B1C5" "HDA:111d76d5,103c3650,00100402" "0x103c" "0x3650"
Hardware is initialized using a generic method
salvo@salvo-HP ~ $
Code: Select all
salvo@salvo-HP ~ $ sudo alsactl init
[sudo] password di salvo:
Found hardware: "HDA-Intel" "IDT 92HD81B1C5" "HDA:111d76d5,103c3650,00100402" "0x103c" "0x3650"
Hardware is initialized using a generic method
salvo@salvo-HP ~ $
Code: Select all
curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999
Code: Select all
salvo@salvo-HP ~ $ curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2039 100 2039 0 0 3112 0 --:--:-- --:--:-- --:--:-- 3108
cat: /etc/pulse/client.conf: No such file or directory
https://termbin.com/mplna
salvo@salvo-HP ~ $
cat /proc/asound/card0/codec#0
you'll see many of the entries have this near the bottom:
Code: Select all
Power: setting=D3, actual=D3
xed admin:///etc/default/grub
and when the file opens find the line that will probably look just like this:
Code: Select all
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Code: Select all
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off"
sudo update-grub
cat /proc/asound/card0/codec#0
and paste the output.Code: Select all
xed admin:///etc/default/grub
** (xed:14272): WARNING **: 20:11:01.594: La posizione specificata non è supportata
sudo nano /etc/default/grub
Code: Select all
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Code: Select all
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off"
GRUB_CMDLINE_LINUX=""
sudo update-grub
then reboot and test.Code: Select all
salvo@salvo-HP ~ $ cat /proc/asound/card0/codec#0
Codec: IDT 92HD81B1C5
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d76d5
Subsystem Id: 0x103c3650
Revision Id: 0x100402
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold S3D3cold CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x76
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x04a11020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0421101f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x400000f4: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states:
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0e [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400000f1: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x400000f2: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x10 [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00000010: OUT
Pin Default 0x400000f3: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x3
Pin-ctls: 0x00:
Power states:
Power: setting=D3, actual=D3
Connection: 1
0x1a
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x02 0x02]
Pincap 0x00000024: IN Detect
Pin Default 0x90a10160: [Fixed] Mic at Int N/A
Conn = 1/8, Color = Unknown
DefAssociation = 0x6, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power states:
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="92HD81B1C5 Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Converter: stream=5, channel=0
Power states:
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power states:
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="92HD81B1C5 Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power states:
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power states:
Power: setting=D3, actual=D3
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0f 0x0f]
Power states:
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11* 0x12 0x0a
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power states:
Power: setting=D3, actual=D3
Connection: 7
0x0c* 0x0e 0x0f 0x1b 0x11 0x12 0x0a
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power states:
Power: setting=D3, actual=D3
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power states:
Power: setting=D3, actual=D3
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x18 0x18]
Power states:
Power: setting=D3, actual=D3
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power states:
Power: setting=D3, actual=D3
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states:
Power: setting=D3, actual=D3
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power states:
Power: setting=D3, actual=D3
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x400000f5: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x5
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D3, actual=D3
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x400000f6: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x6
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states:
Power: setting=D3, actual=D3
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x80]
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
salvo@salvo-HP ~ $
sudo update-grub
again, then reboot once more.alsamixer
again and arrow over to the Auto-Mute Mode column. Press the up arrow to change it from Disabled to something else. There might be one or two changes possible by pressing the up arrow again. Try the different possibilities and see if that makes any difference.Code: Select all
sudo hda-verb /dev/snd/hwC0D0 0x0d GET_POWER POWER_STATE
Code: Select all
sudo hda-verb /dev/snd/hwC0D0 0x1c GET_POWER POWER_STATE
Code: Select all
salvo@salvo-HP ~ $ sudo hda-verb /dev/snd/hwC0D0 0x0d GET_POWER POWER_STATE
[sudo] password di salvo:
nid = 0xd, verb = 0xf05, param = 0xf
value = 0x0
salvo@salvo-HP ~ $ sudo hda-verb /dev/snd/hwC0D0 0x1c GET_POWER POWER_STATE
nid = 0x1c, verb = 0xf05, param = 0xf
value = 0x0
salvo@salvo-HP ~ $
dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel'
Code: Select all
salvo@salvo-HP ~ $ dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel'
[ 0.468986] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.468988] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.468990] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[ 29.721008] usb 3-1: USB disconnect, device number 2
[ 29.935171] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
[ 29.939069] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 29.939086] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 29.939106] snd_hda_intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw'
[ 29.997647] ath: phy0: Enable LNA combining
--
[ 30.011172] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa29300540000, irq=16
[ 31.163901] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1C5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 31.163906] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 31.163910] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 31.163912] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 31.163915] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 31.163919] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 31.163922] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 31.184865] kvm: disabled by bios
[ 31.208983] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 31.209116] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 31.221561] kvm: disabled by bios
[ 31.681712] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 31.681844] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 31.681969] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 31.682093] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 31.948753] intel_powerclamp: No package C-state available
salvo@salvo-HP ~ $
Code: Select all
[ 29.935171] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
ls -la /var/lib/gdm3
ls -l /var/lib
and lsof/dev/snd/*
as well.ls -l /lib/firmware
and if hda-jack-retask.fw is there, then cat /lib/firmware/hda-jack-retask.fw
please.