[SOLVED - Hardware Issue] At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Questions about codecs, DVD playback, web plugins...
Forum rules
Before you post please read how to get help
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

MrEen wrote:
Sat Nov 21, 2020 12:31 am
Just spotted this as well:

Code: Select all

[  492.611179] qasmixer[2048]: segfault at f8 ip 00007f106e56b5a5 sp 00007fff13c6ecc0 error 4 in libasound_module_ctl_arcam_av.so[7f106e56a000+3000]
That may have been related to the libasound updates.

Let's see a fresh copy of this:

Code: Select all

dmesg | grep -C1 -E 'ALSA|HDA|sof|HDMI|snd[_-]|sound|hda.codec|hda.intel'
With that kernel you're using, it might be necessary to put sudo in front of that command, but probably not.
New dmesg output:

Code: Select all

zoya@zoyas-pc ~ $ sudo su
[sudo] password for zoya:             
root@zoyas-pc:/home/zoya# dmesg | grep -C1 -E 'ALSA|HDA|sof|HDMI|snd[_-]|sound|hda.codec|hda.intel'
[    0.310442] ACPI: Added _OSI(Linux-Dell-Video)
[    0.310442] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.310442] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[    0.848268] Freeing initrd memory: 86920K
[    0.848282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.848286] software IO TLB: mapped [mem 0xcbf90000-0xcff90000] (64MB)
[    0.848547] check: Scanning for low memory corruption every 60 seconds
--
[    4.788109] [drm] Connector 0:
[    4.788112] [drm]   HDMI-A-1
[    4.788114] [drm]   HPD4
--
[    4.825939] random: crng init done
[    4.922734] radeon 0000:01:00.0: [drm] HDMI-A-1: EDID is invalid:
[    4.922744] 	[00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
--
[    4.922764] 	[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.922821] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    5.093044] [drm] fb mappable at 0xD0363000
--
[    5.481517] raid6: using ssse3x2 recovery algorithm
[    5.482966] xor: measuring software checksum speed
[    5.492440]    prefetch64-sse: 12164.000 MB/sec
--
[    5.811621] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.340293] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    7.614332] systemd[1]: Inserted module 'autofs4'
--
[   17.473894] intel_powerclamp: No package C-state available
[   17.846878] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
[   17.847167] snd_hda_intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw'
[   18.191361] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   18.313203] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   18.313207] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.313210] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   18.313211] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.313213] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   18.313215] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.313217] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   18.313220] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   18.313221] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   18.329168] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   18.329256] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   18.329341] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.329422] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.329539] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.329642] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.329728] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   18.329818] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   18.396483] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
--
[   36.083013] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   41.526549] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   41.794900] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   57.506308] alloc_contig_range: [22dd00, 22dd05) PFNs busy
--
[   57.592002] alloc_contig_range: [22dd00, 22dd0d) PFNs busy
[   60.587189] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   60.950130] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   61.224475] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   61.499005] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   61.785016] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   62.211599] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   64.410602] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   65.265487] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  234.955914] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  235.285675] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  324.564734] perf: interrupt took too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  515.125155] perf: interrupt took too long (3160 > 3157), lowering kernel.perf_event_max_sample_rate to 63000
[  753.235591] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  753.534377] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  808.023346] perf: interrupt took too long (3971 > 3950), lowering kernel.perf_event_max_sample_rate to 50000
root@zoyas-pc:/home/zoya# 
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Hmm, way back at the beginning of this thread you removed the boot override in HDAJackRetask, but it's still there:

Code: Select all

[   17.846878] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
[   17.847167] snd_hda_intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw'
Did you redo it, or did the removal fail?
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

I was playing with the ATI card after I turned off the built-in audio in the BIOS. It should have no impact on the Intel HDA settings but I can remove it and run dmesg again.
If I had a signature, this is where I'd stick it.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

I removed it again, and re-ran dmesg:

Code: Select all

zoya@zoyas-pc ~ $ sudo dmesg | grep -C1 -E 'ALSA|HDA|sof|HDMI|snd[_-]|sound|hda.codec|hda.intel'
[sudo] password for zoya:             
[    0.353883] ACPI: Added _OSI(Linux-Dell-Video)
[    0.353918] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.353954] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[    0.872748] Freeing initrd memory: 83764K
[    0.872874] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.872915] software IO TLB: mapped [mem 0xcbf90000-0xcff90000] (64MB)
[    0.873213] check: Scanning for low memory corruption every 60 seconds
--
[    2.870493] [drm] Connector 0:
[    2.870495] [drm]   HDMI-A-1
[    2.870498] [drm]   HPD4
--
[    2.992324] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[    3.007056] radeon 0000:01:00.0: HDMI-A-1: EDID is invalid:
[    3.007064] 	[00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
--
[    3.007083] 	[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.007132] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    3.179391] [drm] fb mappable at 0xD0363000
--
[    3.853645] raid6: using ssse3x2 recovery algorithm
[    3.857797] xor: measuring software checksum speed
[    3.897570]    prefetch64-sse: 13840.000 MB/sec
--
[    4.433607] random: 7 urandom warning(s) missed due to ratelimiting
[    4.456271] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    5.957944] systemd[1]: Inserted module 'autofs4'
--
[   15.129993] intel_powerclamp: No package C-state available
[   15.691126] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   15.770322] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   15.854862] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   15.854865] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.854867] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.854868] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.854870] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   15.854871] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.854873] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   15.854875] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   15.854876] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   15.872625] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.872707] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.872827] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.872900] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.872975] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.873068] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   15.873148] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   15.873233] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   15.879955] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
--
[   33.178672] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   37.515742] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   37.783586] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   55.304745] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   55.658409] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   55.929305] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   56.200415] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   56.472057] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   57.431697] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   59.258956] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   59.667429] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
zoya@zoyas-pc ~ $ 
** Edit: I've made one other change, this time to /etc/default/grub. I changed GRUB_CMDLINE_LINUX_DEFAULT to include the option amdgpu.dc=1 to see if I can get audio going on the ATI card.
If I had a signature, this is where I'd stick it.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

Here's the post-reboot update:

Code: Select all

zoya@zoyas-pc ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
zoya@zoyas-pc ~ $ sudo dmesg | grep -C1 -E 'ALSA|HDA|sof|HDMI|snd[_-]|sound|hda.codec|hda.intel'
[sudo] password for zoya:               
[    0.309447] ACPI: Added _OSI(Linux-Dell-Video)
[    0.309447] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.309447] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[    0.847577] Freeing initrd memory: 86920K
[    0.847591] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.847596] software IO TLB: mapped [mem 0xcbf90000-0xcff90000] (64MB)
[    0.847868] check: Scanning for low memory corruption every 60 seconds
--
[    4.803105] [drm] Connector 0:
[    4.803107] [drm]   HDMI-A-1
[    4.803109] [drm]   HPD4
--
[    4.803134] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.937679] radeon 0000:01:00.0: [drm] HDMI-A-1: EDID is invalid:
[    4.937690] 	[00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
--
[    4.937710] 	[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    4.937763] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    5.107773] [drm] fb mappable at 0xD0363000
--
[    5.506517] raid6: using ssse3x2 recovery algorithm
[    5.507974] xor: measuring software checksum speed
[    5.517441]    prefetch64-sse: 12028.000 MB/sec
--
[    5.838853] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.338706] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    7.616600] systemd[1]: Inserted module 'autofs4'
--
[   17.657301] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   17.870638] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   18.117381] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   18.117385] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.117387] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   18.117389] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.117391] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   18.117392] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.117395] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   18.117397] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   18.117399] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   18.133713] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   18.133822] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   18.133910] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   18.133996] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.134086] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.134168] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.134251] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   18.134340] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   19.630961] audit: type=1400 audit(1605944091.020:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=558 comm="apparmor_parser"
--
[   36.995375] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   41.553910] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   41.822350] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   66.102181] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   66.474211] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   66.747476] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   67.020507] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   67.296459] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   68.134464] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   69.806120] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   70.265903] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
zoya@zoyas-pc ~ $ 
Now, with speakers connected to front headphone jack (green front):

Code: Select all

zoya@zoyas-pc ~ $ sudo hdajacksensetest -a
Pin 0x11 (Orange SPDIF Out, Rear side): present = No
Pin 0x12 (Not connected): present = No
Pin 0x14 (Green Line Out, Rear side): present = No
Pin 0x15 (Black Line Out, Rear side): present = No
Pin 0x16 (Orange Line Out, Rear side): present = No
Pin 0x17 (Grey Line Out, Rear side): present = No
Pin 0x18 (Pink Mic, Rear side): present = No
Pin 0x19 (Pink Mic, Front side): present = No
Pin 0x1a (Blue Line In, Rear side): present = No
Pin 0x1b (Green Headphone, Front side): present = No
Pin 0x1c (Not connected): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Black Digital Out, HDMI): present = No
Pin 0x1f (Not connected): present = No
zoya@zoyas-pc ~ $ 
With speakers connected to line out (green, rear):

Code: Select all

zoya@zoyas-pc ~ $ sudo hdajacksensetest -a
Pin 0x11 (Orange SPDIF Out, Rear side): present = No
Pin 0x12 (Not connected): present = No
Pin 0x14 (Green Line Out, Rear side): present = No
Pin 0x15 (Black Line Out, Rear side): present = No
Pin 0x16 (Orange Line Out, Rear side): present = No
Pin 0x17 (Grey Line Out, Rear side): present = No
Pin 0x18 (Pink Mic, Rear side): present = No
Pin 0x19 (Pink Mic, Front side): present = No
Pin 0x1a (Blue Line In, Rear side): present = No
Pin 0x1b (Green Headphone, Front side): present = No
Pin 0x1c (Not connected): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Black Digital Out, HDMI): present = No
Pin 0x1f (Not connected): present = No
zoya@zoyas-pc ~ $ 
With speakers connected to 3.5mm stereo out on HDMI adapter:

Code: Select all

zoya@zoyas-pc ~ $ sudo hdajacksensetest -a
Pin 0x11 (Orange SPDIF Out, Rear side): present = No
Pin 0x12 (Not connected): present = No
Pin 0x14 (Green Line Out, Rear side): present = No
Pin 0x15 (Black Line Out, Rear side): present = No
Pin 0x16 (Orange Line Out, Rear side): present = No
Pin 0x17 (Grey Line Out, Rear side): present = No
Pin 0x18 (Pink Mic, Rear side): present = No
Pin 0x19 (Pink Mic, Front side): present = No
Pin 0x1a (Blue Line In, Rear side): present = No
Pin 0x1b (Green Headphone, Front side): present = No
Pin 0x1c (Not connected): present = No
Pin 0x1d (Not connected): present = No
Pin 0x1e (Black Digital Out, HDMI): present = No
Pin 0x1f (Not connected): present = No
zoya@zoyas-pc ~ $ 
Sadly.... No change.

Image

I expect [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID as long as there's no monitor connected to the adapter, meaning no picture, but I should - in theory - still have sound. Shouldn't I? I might try connecting her tower to the TV (HDMI) and see if the audio works with a picture, the way it was intended originally.
If I had a signature, this is where I'd stick it.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

Well, I tried booting the live Mint 19.3 .ISO, and here's what I got:

Code: Select all

mint@mint:~$ sudo dmesg | grep -C1 -E 'ALSA|HDA|sof|HDMI|snd[_-]|sound|hda.codec|hda.intel'
[    0.328337] ACPI: Added _OSI(Linux-Dell-Video)
[    0.328337] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.328337] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[    0.445052] Freeing initrd memory: 41140K
[    0.445081] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.445084] software IO TLB: mapped [mem 0xcbc79000-0xcfc79000] (64MB)
[    0.445350] check: Scanning for low memory corruption every 60 seconds
--
[    9.540557] [drm] Connector 0:
[    9.540558] [drm]   HDMI-A-1
[    9.540558] [drm]   HPD4
--
[    9.672427] sd 4:0:0:1: [sde] Attached SCSI removable disk
[    9.673810] radeon 0000:01:00.0: HDMI-A-1: EDID is invalid:
[    9.673812] 	[00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
--
[    9.673818] 	[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    9.673872] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[    9.679815]  sdc: sdc1 sdc2
--
[    9.943789] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   10.219084] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   10.544556] ISO 9660 Extensions: Microsoft Joliet Level 3
[   10.548174] ISO 9660 Extensions: RRIP_1991A
--
[   18.644352] intel_powerclamp: No package C-state available
[   18.647514] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   18.671458] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[   18.704171] intel_powerclamp: No package C-state available
--
[   20.955707] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   20.967818] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   21.057147] r8169 0000:03:00.0 enp3s0: Link is Down
[   21.687702] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[   22.458609] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control off
[   22.458626] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   22.691693] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x100f0000
[   22.929844] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   23.198970] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   23.695705] snd_hda_intel 0000:00:1b.0: Codec #1 probe error; disabling it...
[   23.725481] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   23.725484] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.725486] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   23.725487] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.725489] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   23.725490] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.725492] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   23.725494] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   23.725495] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   23.739785] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   23.739868] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   23.739951] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   23.740021] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   23.740089] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   23.740159] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   23.740226] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   23.740298] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   26.533436] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   26.805706] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   27.144059] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   27.738162] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   28.046225] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[   28.855120] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  199.164901] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  365.981703] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  385.851868] [drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
[  495.139480] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
mint@mint:~$ 
Image

Also worth noting (maybe) are these two lines from the 19.3 live environment's version of the dmesg output:

Code: Select all

[   22.691693] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x100f0000
[   23.695705] snd_hda_intel 0000:00:1b.0: Codec #1 probe error; disabling it...
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Those last things you posted are the reason for needing the probe_mask=1 parameter. And what that does is negate the faulty BIOS reporting.

Let's see this one again now that the override is removed:

Code: Select all

wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
I have a couple of ideas that might work depending on what I see there to at least hopefully get the headphone port working.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

MrEen wrote:
Sat Nov 21, 2020 11:24 am
Those last things you posted are the reason for needing the probe_mask=1 parameter. And what that does is negate the faulty BIOS reporting.

Let's see this one again now that the override is removed:

Code: Select all

wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh
I have a couple of ideas that might work depending on what I see there to at least hopefully get the headphone port working.
Done, posted here: http://alsa-project.org/db/?f=949c238bb ... fb282e2c9d
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Well, removing the override fixed what I saw wrong with 0x1b, so that shoots down my ideas.

But a new one popped up that I can't say will have any effect but it's worth a try:

In the terminal enter sudo alsactl store followed by xed admin:///var/lib/alsa/asound.state and when the file opens scroll down to this section:

Code: Select all

	control.40 {
		iface CARD
		name 'Line Out Front Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.41 {
		iface CARD
		name 'Line Out Surround Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.42 {
		iface CARD
		name 'Line Out CLFE Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.43 {
		iface CARD
		name 'Line Out Side Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.44 {
		iface CARD
		name 'Front Headphone Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
Change each false to true then save the file and run sudo alsactl restore. Then test the sound.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

MrEen wrote:
Sat Nov 21, 2020 12:31 pm
Well, removing the override fixed what I saw wrong with 0x1b, so that shoots down my ideas.

But a new one popped up that I can't say will have any effect but it's worth a try:

In the terminal enter sudo alsactl store followed by xed admin:///var/lib/alsa/asound.state and when the file opens scroll down to this section:

Code: Select all

	control.40 {
		iface CARD
		name 'Line Out Front Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.41 {
		iface CARD
		name 'Line Out Surround Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.42 {
		iface CARD
		name 'Line Out CLFE Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.43 {
		iface CARD
		name 'Line Out Side Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
	control.44 {
		iface CARD
		name 'Front Headphone Jack'
		value false
		comment {
			access read
			type BOOLEAN
			count 1
		}
	}
Change each false to true then save the file and run sudo alsactl restore. Then test the sound.
Well, everything was going fine, until the last instruction:

Code: Select all

zoya@zoyas-pc ~ $ sudo alsactl restore
alsactl: set_control:1461: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted
Still no sound, and still only SPDIF shows up.

At this point, I think I'm just going to call it a hardware issue. :( My next project will be to see if I can cobble something else together in place of this Dell. I have enough spare parts to build a new machine, but it's not going to be quite as nice as this one. On the flip side, however, the sound should probably work.

I appreciate all your help, MrEen. You've given me a lot to work with, should I encounter audio issues again. :)
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Damn!

I highly doubt this will make any difference, but run this and try it again:

Code: Select all

pacmd set-card-profile alsa_card.pci-0000_00_1b.0 output:analog-stereo+input:analog-stereo
The reason for my doubt is the error is from ALSA not PulseAudio, but it just seems like we're so close.

And did we ever try sudo alsa force-reload?
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

We've done sudo alsa force-reload once before, but I'll do it again.

Here's what we got:

Code: Select all

zoya@zoyas-pc ~ $ pacmd set-card-profile alsa_card.pci-0000_00_1b.0 output:analog-stereo+input:analog-stereo
zoya@zoyas-pc ~ $ sudo alsa force-reload
[sudo] password for zoya:             
Unloading ALSA sound driver modules: snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer (failed: modules still loaded: snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-timer).
Loading ALSA sound driver modules: snd-hda-codec-realtek snd-hda-codec-generic snd-hda-codec-hdmi snd-hda-intel snd-intel-dspcfg snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer.
zoya@zoyas-pc ~ $ 
Still no sound, though I do see this now:
Image

Tried both the rear green jack and the front green jack to no avail. The reason I'm leaning towards hardware is because other distro live ISOs have the same issue. I suppose I could try something different like Mandriva or Fedora, since they're not using the Debian base that Ubuntu (and hence Mint), or Knoppix use, though I haven't used a Red Hat variant since the 1990s when I had to install it off 3.5" floppies. It's certainly easier than building a new machine!
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Manjaro is a good one to test. Lots of differences in the sound stack compared to anything Ubuntu-like.

Wish we could have figured this out! :evil:
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

MrEen wrote:
Sat Nov 21, 2020 1:33 pm
Manjaro is a good one to test. Lots of differences in the sound stack compared to anything Ubuntu-like.

Wish we could have figured this out! :evil:
I'm downloading the ISOs now but won't try until later. Since I work the graveyard shift, I really need to get some sleep, as I haven't been to bed yet.

I'll report back after I've tested the others.
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Sound good. Get some rest! :D
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

I had to wait a while for her to finish gaming, but here's what I have.

I tested 4 other distros, not Ubuntu or Debian based: Fedora 33, OpenMandriva 4.1, Mageia 7.1, and Manjaro 20. So far, I'm batting negative 1,000. No sound in any of them, and still the same issue: only the SPDIF output shows.

Fedora:

Image


Mandriva:

Image


Mageia:

Image


Manjaro:

Image

Different kernels, different bases, different driver providers, different systems in almost every respect, but same result. More convinced than ever before that it's something screwy with the hardware. Something happened (apparently) while it wasn't being used, and it's messing with the audio component.

The only other thing I could try would be to replace the video card and see if that somehow resolves whatever conflict is raging behind the scenes here, unless there are other ideas. At this point, I think we've literally tried every play in the book, and all with the same depressing result, right?

:?
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

Yeah, I think we've exhausted all our options here.

The only suggestion I can make is something like this should work for sound: https://www.amazon.com/Sabrent-External ... GN8GWXM80G
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

Thanks for the tip! :)
If I had a signature, this is where I'd stick it.
User avatar
EvilSupahFly
Level 2
Level 2
Posts: 88
Joined: Sat May 24, 2014 11:10 am
Location: Mordor

Re: At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by EvilSupahFly »

Well. Now I'm really upset.

It's not recognizing the USB audio adapter either.

That is to say, it SEES the adapter, and lsusb tells me what it is, but the sound system won't use it and I can't choose it.

I would say this is DEFFINITELY a hardware issue with her mobo, so I will close this thread, and update the title accordingly.

When I plug it into MY system, it's fine - no tweaking, no fussing, no tinkering with terminal commands. The sound just works:

Image
If I had a signature, this is where I'd stick it.
User avatar
MrEen
Level 22
Level 22
Posts: 15169
Joined: Mon Jun 12, 2017 8:39 pm

Re: [SOLVED - Hardware Issue] At Wits End - No Sound on Clean Install of Ulyana with AMD Turks Or Intel ICH10

Post by MrEen »

If you want, I can try to help with that.

Let's see pacmd list-cards if you want to try.
Post Reply

Return to “Sound, Multimedia, & Codecs”