no sound after suspend 20.1

Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

no sound after suspend 20.1

Post by lettebetta »

Hello

mi pc start without sound problems, after suspend it, the audio does not work

i ran before and after the command wget http://www.alsa-project.org/alsa-info.sh -O alsa-info.sh && bash alsa-info.sh

before http://alsa-project.org/db/?f=8a6bf5a53 ... ad4d5ab4af
after http://alsa-project.org/db/?f=6848ed783 ... da83176c4b

i look for the differences between to reports are mainly related to the "converter" "stream" value


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Realtek ALC256
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0256
Subsystem Id: 0x27820206
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x4b 0x4b]
Converter: stream=1, channel=0
.......


thanks, saludos
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

Hi lettebetta, and welcome to the forum.

I don't see anything in those outputs that would indicate an issue, so let's see if PulseAudio is to blame. Please run this one in working and non working cases:

Code: Select all

curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999
EDIT: You can also test if running pulseaudio -k gets the sound working again.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

hi

the command pulseaudio -k doesnt fix the problem

the results of the two cases


audio workin https://termbin.com/tnk4
audio not working https://termbin.com/gatq

saludos
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

Okay, I saw a case like this a few days ago on another forum.

Does sudo alsactl restore get it working again? If not, how about sudo alsactl init?
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

ok


sudo alsactl restore didnt fix the problem (no message in the command)

sudo alsactl init show the message:
alsa-lib main.c:1021:(snd_use_case_mgr_open) error: failed to import hw:0 (empty configuration)
Found hardware: "HDA-Intel" "Realtek ALC256" "HDA:10ec0256,27820206,00100002" "0x2782" "0x0206"
Hardware is initialized using a generic method

neither fix the problem... :shock:
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

I see nothing in your outputs that show why this is happening. They are identical where they need to be.

Let's try something different. In the terminal run xed admin:///etc/pulse/default.pa and when the file opens find this section:

Code: Select all

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
Change it to this:

Code: Select all

### Automatically suspend sinks/sources that become idle for too long
# load-module module-suspend-on-idle
Save the file, reboot, then test your sound before and after suspending.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

i did it, no change in the behavour

i reboot the pc, start with sound working, i suspend it and after wake up there is no sound (mic allways working)....
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

lettebetta wrote: Tue Apr 06, 2021 9:17 pm(mic allways working)....
Now that's even stranger!

What apps are you using to play sound?
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

i used the sound control, there is a test (the microphone test i just see the volume bar when i clap my hands)
Captura de pantalla de 2021-04-06 23-22-37_.png

for the outgoing sound, i tried with the test in the same sound control
i tried youtube (chrome)
i tried Audacity
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

When the sound stops working does this play some sound:

Code: Select all

aplay /usr/share/sounds/alsa/Front_Center.wav
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

the command works before..... but after i suspend the computer... no sound

another clue or weird fact
if i use headset plugged there is sound through the headphones before and after the suspend, i plugged and unplugged but still no sound through the speakers

so, it looks like the problem is related to the speakers or their volume.
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

Okay, that is really strange regarding the headphones!

The speaker controls are identical in working and non working cases, so I'm struggling to come up with some ideas here.

This is a shot in the dark, but run alsamixer in the terminal and arrow over to the Auto-Mute Mode column, then hit the down arrow until it says Disabled, then test the suspending again.
OhioYJ
Level 1
Level 1
Posts: 36
Joined: Sun Jul 01, 2012 3:14 pm

Re: no sound after suspend 20.1

Post by OhioYJ »

This sounds similar to my problem. When my computers have no sound, generally in PulseAudio Control under configuration my output will be off. Turning this back on (selecting a profile) will make sound work again. Every now and then it's just in sound settings and the output profile there (from the taskbar).

Image
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

hello

first of all, thanks for your time and help


i ran alsamixer in the terminal and put into Disable mode the Auto-Mute Mode column, the problem is still the same


if i open pulseaudio control, under configuration, i can see this, there is no change before or after the problem
Captura de pantalla de 2021-04-10 12-59-45.png
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

Your outputs before and after suspending are not different in any way that should be affecting your speakers. The fact that headphones are working means the issue is at some deeper level than what those outputs expose.

I only have one idea left that might help:

Code: Select all

echo 1 | sudo tee /sys/module/snd_hda_codec/parameters/dump_coef
Run that with working sound, followed by this one:

Code: Select all

cat /proc/asound/card0/codec#0
Paste the output here, then do the same after suspending/waking. I'm hoping there'll be a difference in the listings that indicates where the issue is.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

here is the result

i saw just one diference

after Coeff 0x10: 0x0220 and before Coeff 0x10: 0x0020




Before

Code: Select all

Codec: Realtek ALC256
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0256
Subsystem Id: 0x27820206
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=1, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC256 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x00 0x00]
  Converter: stream=1, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC256 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x3f 0x3f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Pincap 0x00000020: IN
  Pin Default 0x90a60130: [Fixed] Mic at Int N/A
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19040: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00013734: IN OUT EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4067b945: [N/A] Modem Line at Ext N/A
    Conn = Analog, Color = UNKNOWN
    DefAssociation = 0x4, Sequence = 0x5
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=91
    Coeff 0x00: 0x0002
    Coeff 0x01: 0xaaaa
    Coeff 0x02: 0x8aaa
    Coeff 0x03: 0x0002
    Coeff 0x04: 0xaa09
    Coeff 0x05: 0x0700
    Coeff 0x06: 0x6114
    Coeff 0x07: 0x0200
    Coeff 0x08: 0x6a0c
    Coeff 0x09: 0xe003
    Coeff 0x0a: 0x7770
    Coeff 0x0b: 0x7770
    Coeff 0x0c: 0x01ef
    Coeff 0x0d: 0xa020
    Coeff 0x0e: 0x65c0
    Coeff 0x0f: 0x7778
    Coeff 0x10: 0x0020
    Coeff 0x11: 0x7418
    Coeff 0x12: 0xebc4
    Coeff 0x13: 0x422f
    Coeff 0x14: 0x0400
    Coeff 0x15: 0x8ccc
    Coeff 0x16: 0x4c50
    Coeff 0x17: 0xff00
    Coeff 0x18: 0x0003
    Coeff 0x19: 0x0f52
    Coeff 0x1a: 0x8003
    Coeff 0x1b: 0x064b
    Coeff 0x1c: 0x0000
    Coeff 0x1d: 0x0000
    Coeff 0x1e: 0x0000
    Coeff 0x1f: 0x0000
    Coeff 0x20: 0x51ff
    Coeff 0x21: 0x8000
    Coeff 0x22: 0x8f00
    Coeff 0x23: 0x88f4
    Coeff 0x24: 0x0000
    Coeff 0x25: 0x0000
    Coeff 0x26: 0x0000
    Coeff 0x27: 0x0000
    Coeff 0x28: 0x0000
    Coeff 0x29: 0x3000
    Coeff 0x2a: 0x0000
    Coeff 0x2b: 0x0000
    Coeff 0x2c: 0x0f00
    Coeff 0x2d: 0x1f4f
    Coeff 0x2e: 0x2902
    Coeff 0x2f: 0xf777
    Coeff 0x30: 0x1000
    Coeff 0x31: 0xe200
    Coeff 0x32: 0x54a8
    Coeff 0x33: 0x8400
    Coeff 0x34: 0xa20c
    Coeff 0x35: 0x8d6a
    Coeff 0x36: 0x5757
    Coeff 0x37: 0xfe05
    Coeff 0x38: 0x9901
    Coeff 0x39: 0x110a
    Coeff 0x3a: 0x0010
    Coeff 0x3b: 0x60d9
    Coeff 0x3c: 0x0314
    Coeff 0x3d: 0xc2ba
    Coeff 0x3e: 0xa928
    Coeff 0x3f: 0x0001
    Coeff 0x40: 0x8800
    Coeff 0x41: 0x0000
    Coeff 0x42: 0x2000
    Coeff 0x43: 0x3d90
    Coeff 0x44: 0x2000
    Coeff 0x45: 0xb089
    Coeff 0x46: 0x0004
    Coeff 0x47: 0xa47a
    Coeff 0x48: 0xd049
    Coeff 0x49: 0x0049
    Coeff 0x4a: 0x0000
    Coeff 0x4b: 0x5555
    Coeff 0x4c: 0x065c
    Coeff 0x4d: 0x7fff
    Coeff 0x4e: 0x7fff
    Coeff 0x4f: 0x0000
    Coeff 0x50: 0x0000
    Coeff 0x51: 0x2f2f
    Coeff 0x52: 0x0100
    Coeff 0x53: 0x3320
    Coeff 0x54: 0xcc00
    Coeff 0x55: 0x0000
    Coeff 0x56: 0x3f00
    Coeff 0x57: 0x0000
    Coeff 0x58: 0x0000
    Coeff 0x59: 0x0000
    Coeff 0x5a: 0x1300
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02 0x03*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x12
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x12* 0x13



After

Code: Select all

Codec: Realtek ALC256
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0256
Subsystem Id: 0x27820206
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3 D3cold CLKSTOP EPSS
  Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x57 0x57]
  Converter: stream=1, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Control: name="Headphone Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Device: name="ALC256 Analog", type="Audio", device=0
  Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
  Amp-Out vals:  [0x00 0x00]
  Converter: stream=1, channel=0
  PCM:
    rates [0x60]: 44100 48000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC256 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x3f 0x3f]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
  Amp-In vals:  [0x97 0x97]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Control: name="Internal Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Pincap 0x00000020: IN
  Pin Default 0x90a60130: [Fixed] Mic at Int N/A
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00000020: IN
  Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
  Pin-ctls: 0x00:
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x00010014: OUT EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Control: name="Mic Boost Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19040: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Pincap 0x00003724: IN Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00: VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x00013734: IN OUT EAPD Detect
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4067b945: [N/A] Modem Line at Ext N/A
    Conn = Analog, Color = UNKNOWN
    DefAssociation = 0x4, Sequence = 0x5
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=91
    Coeff 0x00: 0x0002
    Coeff 0x01: 0xaaaa
    Coeff 0x02: 0x8aaa
    Coeff 0x03: 0x0002
    Coeff 0x04: 0xaa09
    Coeff 0x05: 0x0700
    Coeff 0x06: 0x6114
    Coeff 0x07: 0x0200
    Coeff 0x08: 0x6a0c
    Coeff 0x09: 0xe003
    Coeff 0x0a: 0x7770
    Coeff 0x0b: 0x7770
    Coeff 0x0c: 0x01ef
    Coeff 0x0d: 0xa020
    Coeff 0x0e: 0x65c0
    Coeff 0x0f: 0x7778
    Coeff 0x10: 0x0220
    Coeff 0x11: 0x7418
    Coeff 0x12: 0xebc4
    Coeff 0x13: 0x422f
    Coeff 0x14: 0x0400
    Coeff 0x15: 0x8ccc
    Coeff 0x16: 0x4c50
    Coeff 0x17: 0xff00
    Coeff 0x18: 0x0003
    Coeff 0x19: 0x0f52
    Coeff 0x1a: 0x8003
    Coeff 0x1b: 0x064b
    Coeff 0x1c: 0x0000
    Coeff 0x1d: 0x0000
    Coeff 0x1e: 0x0000
    Coeff 0x1f: 0x0000
    Coeff 0x20: 0x51ff
    Coeff 0x21: 0x8000
    Coeff 0x22: 0x8f00
    Coeff 0x23: 0x88f4
    Coeff 0x24: 0x0000
    Coeff 0x25: 0x0000
    Coeff 0x26: 0x0000
    Coeff 0x27: 0x0000
    Coeff 0x28: 0x0000
    Coeff 0x29: 0x3000
    Coeff 0x2a: 0x0000
    Coeff 0x2b: 0x0000
    Coeff 0x2c: 0x0f00
    Coeff 0x2d: 0x1f4f
    Coeff 0x2e: 0x2902
    Coeff 0x2f: 0xf777
    Coeff 0x30: 0x1000
    Coeff 0x31: 0xe200
    Coeff 0x32: 0x54a8
    Coeff 0x33: 0x8400
    Coeff 0x34: 0xa20c
    Coeff 0x35: 0x8d6a
    Coeff 0x36: 0x5757
    Coeff 0x37: 0xfe05
    Coeff 0x38: 0x9901
    Coeff 0x39: 0x110a
    Coeff 0x3a: 0x0010
    Coeff 0x3b: 0x60d9
    Coeff 0x3c: 0x0314
    Coeff 0x3d: 0xc2ba
    Coeff 0x3e: 0xa928
    Coeff 0x3f: 0x0001
    Coeff 0x40: 0x8800
    Coeff 0x41: 0x0000
    Coeff 0x42: 0x2000
    Coeff 0x43: 0x3d90
    Coeff 0x44: 0x2000
    Coeff 0x45: 0xb089
    Coeff 0x46: 0x0004
    Coeff 0x47: 0xa47a
    Coeff 0x48: 0xd049
    Coeff 0x49: 0x0049
    Coeff 0x4a: 0x0000
    Coeff 0x4b: 0x5555
    Coeff 0x4c: 0x065c
    Coeff 0x4d: 0x7fff
    Coeff 0x4e: 0x7fff
    Coeff 0x4f: 0x0000
    Coeff 0x50: 0x0000
    Coeff 0x51: 0x2f2f
    Coeff 0x52: 0x0100
    Coeff 0x53: 0x3320
    Coeff 0x54: 0xcc00
    Coeff 0x55: 0x0000
    Coeff 0x56: 0x3f00
    Coeff 0x57: 0x0000
    Coeff 0x58: 0x0000
    Coeff 0x59: 0x0000
    Coeff 0x5a: 0x1300
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001001c: OUT HP EAPD Detect
  EAPD 0x2: EAPD
  Pin Default 0x02214020: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D1 D2 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 2
     0x02 0x03*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 5
     0x18 0x19 0x1a 0x1b 0x1d
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00]
  Connection: 6
     0x18 0x19 0x1a 0x1b 0x1d 0x12
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x12* 0x13
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

Well spotted! That was the only difference that matters here.

Now, install alsa-tools and after the next suspend, run these 2 commands then test the sound:

Code: Select all

sudo hda-verb /dev/snd/hwC0D0 0x20 SET_COEF_INDEX 0x10

Code: Select all

sudo hda-verb /dev/snd/hwC0D0 0x20 SET_PROC_COEF 0x0020
EDIT: Don't be surprised if the speakers make a pop or crackle noise after running the second command.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

ok

i did install ALSA-TOOLS and ran the command (before suspend) and here is the result
Captura de pantalla de 2021-04-11 10-39-22.png
nothing happens, i suspend it and the problem is still there, so to be shure y ran again the command:

Code: Select all

echo 1 | sudo tee /sys/module/snd_hda_codec/parameters/dump_coef 

Code: Select all

cat /proc/asound/card0/codec#0  
and the difference still is after Coeff 0x10: 0x0220 and before Coeff 0x10: 0x0020

i did it twice...maybe... im doing something wrong
User avatar
MrEen
Level 23
Level 23
Posts: 18345
Joined: Mon Jun 12, 2017 8:39 pm

Re: no sound after suspend 20.1

Post by MrEen »

lettebetta wrote: Sun Apr 11, 2021 10:47 am i did it twice...maybe... im doing something wrong
Yes, you should only run the two lines after waking from suspend. Something is changing the COEF stuff when you're suspending, and I'm hoping those commands will get the sound working by changing it back. If it works, then we can find a way to automate it next.
lettebetta
Level 1
Level 1
Posts: 11
Joined: Sun Apr 04, 2021 9:42 am

Re: no sound after suspend 20.1

Post by lettebetta »

je je je je..... that works!!!!! :D :D :D :D :D

thank you very much

but, if i send to sleep the PC, and it wake up without sound
Locked

Return to “Sound”