No Sound After Fresh Install Mint 19.3 Laptop

[lindas_linux]

I had sound before I wiped out this laptop and installed Cinnamon 19.3. I split the root and home directories due to size of hard drive. I've researched and tried multiple things but had no luck. Hoping someone with experience can help. I'm trying to get sound on built in speakers, headphones don't work either. Looks like sound card is not recognized, I have gotten the Dummy Output message in Sound Settings while trying to play something. Below is output from inxi -Fxz and aplay -l

Output from inxi -Fxz
System:
Host: here-iVIEW-MEGATRON Kernel: 5.4.0-74-generic x86_64 bits: 64
compiler: gcc v: 7.5.0 Desktop: Cinnamon 4.4.8
Distro: Linux Mint 19.3 Tricia base: Ubuntu 18.04 bionic
Machine:
Type: Laptop System: Wiltronic product: iVIEW MEGATRON v: N/A
serial: <filter>
Mobo: Wiltronic model: iVIEW MEGATRON v: Type2 - Board Version
serial: <filter> UEFI: INSYDE v: iVIEWx.WT114.HABNEEA03 date: 04/21/2016
Battery:
ID-1: axp288_fuel_gauge charge: 41% condition: N/A model: N/A
status: Charging
CPU:
Topology: Quad Core model: Intel Atom x5-Z8300 bits: 64 type: MCP
arch: Airmont rev: 3 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11520
Speed: 480 MHz min/max: 480/1840 MHz Core speeds (MHz): 1: 480 2: 480
3: 480 4: 480
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
PCI Configuration Registers
driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics (CHV) v: 4.6 Mesa 20.0.8
direct render: Yes
Audio:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
Imaging Unit
driver: intel_atomisp2_pm v: kernel bus ID: 00:03.0
Sound Server: ALSA v: k5.4.0-74-generic
Network:
Message: No Device data found.
Device-1: Realtek RTL8188EUS 802.11n Wireless Network Adapter type: USB
driver: r8188eu bus ID: 1-4.4:5
IF: wlx984827661b8b state: up mac: <filter>
Drives:
Local Storage: total: 146.66 GiB used: 16.11 GiB (11.0%)
ID-1: /dev/mmcblk0 model: NCard size: 28.91 GiB
ID-2: /dev/mmcblk2 model: SPCC size: 117.75 GiB
Partition:
ID-1: / size: 27.83 GiB used: 10.50 GiB (37.7%) fs: ext4
dev: /dev/mmcblk0p2
ID-2: /home size: 115.40 GiB used: 5.60 GiB (4.9%) fs: ext4
dev: /dev/mmcblk2p1
Sensors:
System Temperatures: cpu: 65.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 224 Uptime: 2m Memory: 1.85 GiB used: 883.0 MiB (46.6%)
Init: systemd runlevel: 5 Compilers: gcc: 7.5.0 Shell: bash v: 4.4.20
inxi: 3.0.32


Output from aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Audio [Intel HDMI/DP LPE Audio], device 0: HdmiLpeAudio [Intel HDMI/DP LPE Audi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audio [Intel HDMI/DP LPE Audio], device 1: HdmiLpeAudio [Intel HDMI/DP LPE Audi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audio [Intel HDMI/DP LPE Audio], device 2: HdmiLpeAudio [Intel HDMI/DP LPE Audi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: bytchtes8316 [bytcht-es8316], device 0: Audio (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: bytchtes8316 [bytcht-es8316], device 1: Deep-Buffer Audio (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0

[lindas_linux]

I ran the following and thought this might help someone discover the issue.

Code: Select all

curl https://gitlab.freedesktop.org/pulseaudio/pulseaudio/raw/master/src/utils/pa-info?inline=false | bash | nc termbin.com 9999

https://termbin.com/dokq

Any help is appreciated as I'm a newbie to this. Thanks!