[SOLVED] SSD issue bad disk ?

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
Post Reply
Drygar_2016
Level 1
Level 1
Posts: 48
Joined: Mon Mar 28, 2016 3:14 pm

[SOLVED] SSD issue bad disk ?

Post by Drygar_2016 » Sun May 20, 2018 4:20 am

Hi,

Running LM 18.1 - updated - kernel 4.4

I replaced an old and slow HDD (but working HDD) with a new faster SSD less than an year ago on my refurbished HP. The SSD was placed in a caddy and the HDD removed completely.

All was fine until today when I wanted to make an image using Clonezilla. Less than a minute after Clonezilla started writing the image, it produced and error about disk failure and refused to continue. I thought the error was about the flash drive but I rebooted and:
- perform HP HDD test from BIOS (F2) and it failed with read error
- booted fine and opened Disks app

It showed in red "SELF-TEST FAILED" alert. Made further tests with it and it shows again : Last self-test failed (read) , 190 bad sectors

I did shut down the PC.

Started it again after 1 hour.

Ran badblocks command from Terminal like described here > https://www.fosslinux.com/1297/check-ha ... x-mint.htm
and in the output txt files it produced numbers (a lot of numbers) which I assume are the bad sectors ??

But now when I start the Disks app, it shows Disk is OK (738 bad sectors), not in read ?

Any idea what is going on ? Is the SSD about to fail ? It is still in warranty period so I might be able to have it replaced by the vendor.
I have no symptoms - the PC is running fast and had no other issues so far.

Any advice is appreciated

Attaching the pictures
333.png
222.png
111.png
Last edited by Drygar_2016 on Sun May 20, 2018 3:34 pm, edited 1 time in total.

Laurent85
Level 14
Level 14
Posts: 5446
Joined: Tue May 26, 2015 10:11 am

Re: SSD issue bad disk ?

Post by Laurent85 » Sun May 20, 2018 1:54 pm

I would not trust a drive reporting a self-test failed and with numerous bad blocks. Backup your data and/or Clone your drive and replace your drive as soon as possible.
Image

deepakdeshp
Level 11
Level 11
Posts: 3531
Joined: Sun Aug 09, 2015 10:00 am

Re: SSD issue bad disk ?

Post by deepakdeshp » Sun May 20, 2018 3:08 pm

You can backup your drive with bad blocks using clonezilla. There is an option to ignore bad blocks in clonezilla
If I have helped you solve a problem, please add [SOLVED] to your first post title, it helps other users looking for help, and keeps the forum clean.
I am using Mint 19 Cinnamon 64 bit with AMD A8/7410 processor . Memory 8GB

Drygar_2016
Level 1
Level 1
Posts: 48
Joined: Mon Mar 28, 2016 3:14 pm

Re: SSD issue bad disk ?

Post by Drygar_2016 » Sun May 20, 2018 3:33 pm

Thanks for your replies.

1 additional restart and 15 minutes after my post above ... and the SSD drive failed completely.

But it is so strange that it was working perfectly fine yesterday

It froze completely, Linux Mint could barely load to password prompt. Bootable drives with LM or Windows could not mount it anymore. Could not work with it. Clonezilla reported issues again.

It's now packed with receipts/invoices and will be sent to the seller - they advertise this SSD with 3 year warranty - didn't last 6 months, purchased in November 2017 :)


Thanks

User avatar
lsemmens
Level 5
Level 5
Posts: 698
Joined: Wed Sep 10, 2014 9:07 pm
Location: Rural South Australia

Re: [SOLVED] SSD issue bad disk ?

Post by lsemmens » Sun May 20, 2018 10:51 pm

Back in the day, HDD manufacturers used to supply specific test programs for their drives to advise on their condition. Not sure if the same is true for SSDs, but it might be worth investigating before you have any future issues. (off to investigate for self, now)
Kernel: 4.15.0-24-generic x86_64 bits: 64
Desktop: Cinnamon 3.8.7
Distro: Linux Mint 19 Tara

Laptop T4500 Dualcore 4Gb RAM
Server AMD Phenom 9650 - GEForce 9400GT 6Gb RAM
Out of my mind - please leave a message

Post Reply

Return to “Hardware Support”