Adding new Grahipcs card

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
Level 1
Level 1
Posts: 28
Joined: Mon Feb 16, 2009 6:34 pm

Adding new Grahipcs card

Postby jr223 » Thu May 07, 2009 2:47 pm

Hello there!

I will be purchasing a new video card for my current Mint 6 Felicia installation an Nvidia.
\My question is this:

The current card is an old Ati card, with my Mint 6 Felicia set up and installed.
What is the proper process when doing the below to minimize Xorg.conf problems with monitor and video.
I really really don't want to have to do a re-install, even though I have the current setup backed up.

I will be doing the following

1. Removeing old Ati card from Mint 6 Felicia currently running on this box.
2. Insalling new NVedia card on this box.
3. Booting up box which new Nvida card.

Any suggestions?

Level 23
Level 23
Posts: 18703
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: Adding new Grahipcs card

Postby Husse » Thu May 07, 2009 7:00 pm

If you have a proprietary driver uninstall it
Got to /etc/X11/xorg.conf and in
Section "Device"
add or change to
Driver "vesa"
This way you'll see something when you boot up the new card
Go on and switch cards - be careful to avoid static electricity
Install the nvidia proprietary drivers - I recommend envy (envyng -t)
Don't fix it if it ain't broken, don't break it if you can't fix it

Level 1
Level 1
Posts: 28
Joined: Mon Feb 16, 2009 6:34 pm

Re: Adding new Grahipcs card

Postby jr223 » Thu May 07, 2009 10:40 pm

Thanks for all the great help!

Fortunetly I did not have to edit xorg.conf for proprietary drivers.
The card I was replacing was an older model ATI rage which didn't have support drivers available.
Insallation was a breeze.
I first of course backed up my current Mint 6 install, this included making backups of xorg.conf before shutting the box down, removing the old card and putting in the new
Nvidia BFG, which I got on sale at staples for under $75, as it was an AGP card.

After putting in the new card I booted up Mint, it defeaulted to unknown type 800x600 resolution.
I downloaded the correct driver using the EnvyENG util, and presto!

Now I have amazing compiz, emarld affects with the my new card which has 512MB on board.

Return to “Hardware Support”

Who is online

Users browsing this forum: No registered users and 15 guests