Mouse right click responses too late

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read how to get help
User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Mouse right click responses too late

Postby knurveren » Wed Nov 08, 2017 2:00 pm

I have a wired and wireless mice. I used both of them in turn, the right click responses too late in both. If I click fastly on the right button a few times without break, only at that time the window of the right click appears. This is so bothering. Thanks for your promp helps...

Mouse 1: Fujitsu siemens M520 wired
Mouse 2: Logitech M215 wireless
Last edited by knurveren on Fri Nov 10, 2017 12:44 am, edited 3 times in total.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Thu Nov 09, 2017 11:27 am

Please run the following command from Terminal and post back the results.

Code: Select all

inxi -Fxz
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Thu Nov 09, 2017 11:50 am

Code: Select all

kemal@kemal-ESPRIMO ~ $ inxi -Fxz
System:    Host: kemal-ESPRIMO Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: KDE Plasma 5.8.8 (Qt 5.6.1) Distro: Linux Mint 18.2 Sonya
Machine:   System: FUJITSU product: ESPRIMO_P756
           Mobo: FUJITSU model: D3401-A1 v: S26361-D3401-A1
           Bios: FUJITSU // American Megatrends v: V5.0.0.11 R1.21.0 for D3401-A1x date: 05/15/2017
CPU:       Quad core Intel Core i7-6700 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27264
           clock speeds: max: 4000 MHz 1: 799 MHz 2: 799 MHz 3: 799 MHz 4: 799 MHz
           5: 799 MHz 6: 799 MHz 7: 799 MHz 8: 799 MHz
Graphics:  Card: NVIDIA GF108 [GeForce GT 420] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: GeForce GT 420/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 384.90 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GF108 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card: Intel Ethernet Connection (2) I219-V
           driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2271.2GB (34.7% used)
           ID-1: /dev/sda model: KINGSTON_SUV400S size: 240.1GB
           ID-2: /dev/sdb model: ST1000DM003 size: 1000.2GB
           ID-3: /dev/sdc model: TOSHIBA_DT01ACA1 size: 1000.2GB
           ID-4: USB /dev/sdd model: Ultra size: 30.8GB
Partition: ID-1: / size: 204G used: 20G (11%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 16.85GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 70.5C mobo: N/A gpu: 0.0:41C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 304 Uptime: 7:34 Memory: 2768.9/15734.8MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35
Last edited by Moem on Thu Nov 09, 2017 1:50 pm, edited 1 time in total.
Reason: Added the code tags for easier reading.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Thu Nov 09, 2017 6:11 pm

I'm assuming you've tried other USB ports and don't have both mouses (or is it mice :) ) connected at the same time. That stated.....

When I experience Mouse lag and slow-response problems, it often is connected to video driver.

I see you're using nvidia. Like to try something. Change the video resolution from 1080p to 720p or lower and see if the problem improves or disappears. If that test changes anything, have you tried older or newer kernels? Could also try moving back to nouvea for a test.

Could also be a task running.

Why is the CPU temp so high, 70.5C? If that's an idle temp, something's wrong.
Last edited by ClixTrix on Fri Nov 10, 2017 8:20 am, edited 1 time in total.
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

lmintnewb2

Re: Mouse right click responses too late

Postby lmintnewb2 » Thu Nov 09, 2017 7:08 pm

This is truly intriguing to me ...
don't have both mouses (or is it mice :) )


Now on a grammatical level I know the correct plural of mouse is mice. However both seem oddly appropriate and applicable !!! :P Then again, if it'd been legal my English teacher would have probably beaten me routinely with a stick. :D

OP ... already got some good advice. Do know everything LM I've ever seen, any desktop will have gooey (GUI) tools in it to adjust such things. Mouse pointer speed, sensitivity and that type of stuff. Have you played with the settings there ? Also and this is just an out of left field thought, yeah would only have one active at a time. When not using one or other stuff em down/unplug perhaps ? Just stands to reason with several input devices present your Mint OS may be getting a tad confused and conflicted in how to interface with them. Not sure ... again only a thought.

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 12:52 am

Sorry my english. As result, it is not my mother language. But you are understand what I mean. The mice was connected at the sametime. I disconnected the wired mouse, nothing is changed.
Best regards...
We are all brothers and sisters.

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 12:56 am

ClixTrix wrote:I'm assuming you've tried other USB ports and don't have both mouses (or is it mice :) ) connected at the same time. That stated.....

When I experience Mouse lag and slow-response problems, it often is connected to video driver.

I see you're using nvidia. Like to try something. Change the video resolution from 1080p to 720p or lower and see if the problem improves or disappears. If that test changes anything, have you tried older or newer kernels? Could also try moving back to nouvea for a test.

Could also be a task running.

Why is the CPU temp so high, 70.5C? If that's an idle temp, something's wrong.

I don't want to downgrade the video resolution and use the old kernel. Thank you...In the meantime, the problem only shows itself while I click on the right button of the mouse while using the Google chrome.
Another solution?
Last edited by knurveren on Sat Nov 11, 2017 9:11 am, edited 1 time in total.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 8:25 am

Those weren't solutions. They were tests to help determine cause.

What about that high CPU temp?
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 8:28 am

ClixTrix wrote:Those weren't solutions. They were tests to help determine cause.

What about that high CPU temp?

I don't know. Maybe it possibly shows wrong. It is idle temp. And there is no seeming any problem with CPU in my PC.

PS: I tried the Nouveau driver and also nvidia original driver. Nothing is changed. Only thing that change was CPU temp. 68 degree of C now.

Code: Select all

emal@kemal-ESPRIMO ~ $ inxi -Fxz
System:    Host: kemal-ESPRIMO Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: KDE Plasma 5.8.8 (Qt 5.6.1) Distro: Linux Mint 18.2 Sonya
Machine:   System: FUJITSU product: ESPRIMO_P756
           Mobo: FUJITSU model: D3401-A1 v: S26361-D3401-A1
           Bios: FUJITSU // American Megatrends v: V5.0.0.11 R1.21.0 for D3401-A1x date: 05/15/2017
CPU:       Quad core Intel Core i7-6700 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27264
           clock speeds: max: 4000 MHz 1: 799 MHz 2: 808 MHz 3: 803 MHz 4: 827 MHz
           5: 809 MHz 6: 799 MHz 7: 811 MHz 8: 871 MHz
Graphics:  Card: NVIDIA GF108 [GeForce GT 420] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1920x1080@59.68hz, 1920x1080@60.00hz
           GLX Renderer: Gallium 0.4 on NVC1
           GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GF108 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card: Intel Ethernet Connection (2) I219-V
           driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2240.5GB (34.5% used)
           ID-1: /dev/sda model: KINGSTON_SUV400S size: 240.1GB
           ID-2: /dev/sdb model: ST1000DM003 size: 1000.2GB
           ID-3: /dev/sdc model: TOSHIBA_DT01ACA1 size: 1000.2GB
Partition: ID-1: / size: 204G used: 19G (10%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 16.85GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 68.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 286 Uptime: 2 min Memory: 1518.4/15734.8MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35
kemal@kemal-ESPRIMO ~ $ inxi -Fxz
System:    Host: kemal-ESPRIMO Kernel: 4.10.0-38-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: KDE Plasma 5.8.8 (Qt 5.6.1) Distro: Linux Mint 18.2 Sonya
Machine:   System: FUJITSU product: ESPRIMO_P756
           Mobo: FUJITSU model: D3401-A1 v: S26361-D3401-A1
           Bios: FUJITSU // American Megatrends v: V5.0.0.11 R1.21.0 for D3401-A1x date: 05/15/2017
CPU:       Quad core Intel Core i7-6700 (-HT-MCP-) cache: 8192 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27264
           clock speeds: max: 4000 MHz 1: 799 MHz 2: 799 MHz 3: 820 MHz 4: 799 MHz
           5: 799 MHz 6: 799 MHz 7: 799 MHz 8: 799 MHz
Graphics:  Card: NVIDIA GF108 [GeForce GT 420] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1920x1080@59.68hz, 1920x1080@60.00hz
           GLX Renderer: Gallium 0.4 on NVC1
           GLX Version: 3.0 Mesa 17.0.7 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GF108 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card: Intel Ethernet Connection (2) I219-V
           driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2240.5GB (34.5% used)
           ID-1: /dev/sda model: KINGSTON_SUV400S size: 240.1GB
           ID-2: /dev/sdb model: ST1000DM003 size: 1000.2GB
           ID-3: /dev/sdc model: TOSHIBA_DT01ACA1 size: 1000.2GB
Partition: ID-1: / size: 204G used: 19G (10%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 16.85GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 68.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 286 Uptime: 3 min Memory: 1519.3/15734.8MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481) inxi: 2.2.35
Last edited by knurveren on Fri Nov 10, 2017 8:45 am, edited 1 time in total.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 8:42 am

Does the BIOS Setup on your motherboard show CPU temperature? Is the heatsink fan working?
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 8:50 am

ClixTrix wrote:Does the BIOS Setup on your motherboard show CPU temperature? Is the heatsink fan working?

There is no CPU fan. There is only big aluminium cooler device on the CPU. Let me look CPU temp from BIOS.
Best regards...
We are all brothers and sisters.

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 8:56 am

knurveren wrote:
ClixTrix wrote:Does the BIOS Setup on your motherboard show CPU temperature? Is the heatsink fan working?

There is no CPU fan. There is only big aluminium cooler device on the CPU. Let me look CPU temp from BIOS.


It shows that CPU temp is 60 C in the BIOS.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 8:58 am

I would expect an idle temp in the 30-40C range, not 60+C.

https://communities.intel.com/thread/112251

Is that heatsink loose?
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 9:02 am

ClixTrix wrote:I would expect an idle temp in the 30-40C range, not 60+C.

https://communities.intel.com/thread/112251

Is that heatsink loose?

But computer is new Not old PC. How can be this?
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 9:04 am

Shipping on new PC can sometimes break loose heatsink. You really need to open the case and check that heatsink.

Also, may not have been properly installed in the factory.
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 9:07 am

ClixTrix wrote:Shipping on new PC can sometimes break loose heatsink. You really need to open the case and check that heatsink.

How can I check it? If I remove CPU to see heatsink case, How will I install it again? I do not have heatsink paste.
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 9:11 am

I wasn't suggesting you remove the heatsink. Just need to inspect and see if it's loose from mounting or broken.

If you purchased the PC locally, can you contact seller and ask about the temp problem?
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
knurveren
Level 1
Level 1
Posts: 22
Joined: Mon Nov 25, 2013 9:37 am
Location: Turkey

Re: Mouse right click responses too late

Postby knurveren » Fri Nov 10, 2017 9:12 am

ClixTrix wrote:I wasn't suggesting you remove the heatsink. Just need to inspect and see if it's loose from mounting or broken.

If you purchased the PC locally, can you contact seller and ask about the temp problem?

Yes I purchased it locally. Fujitsu Siemens. Thanks for your helps...
Best regards...
We are all brothers and sisters.

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 9:17 am

If you can't find a obvious problem with the heatsink, CONTACT THE SELLER.
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB

User avatar
ClixTrix
Level 3
Level 3
Posts: 143
Joined: Wed Dec 09, 2015 11:40 am
Location: Columbus, Ohio, USA

Re: Mouse right click responses too late

Postby ClixTrix » Fri Nov 10, 2017 5:32 pm

lmintnewb2 wrote:This is truly intriguing to me ...
don't have both mouses (or is it mice :) )


Now on a grammatical level I know the correct plural of mouse is mice. However both seem oddly appropriate and applicable !!! :P Then again, if it'd been legal my English teacher would have probably beaten me routinely with a stick. :D


If you want a "professional" third opinion on the plural of mouse, I give you Jinks the cat ..... "MEESES"

https://www.youtube.com/watch?v=_QI_2ERlcM8
Linux Mint 18.2 x64 Cinnamon Kernel 4.10.0-38 Xenial
Gigabyte GA-AB350M-D3H (F5a) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 16GB (2x8GB) /XFX HD5450-1GB
SSD Samsung EVO 960 250GB / HDD WD1600BEKT 160GB / SSD Toshiba OCZ VX500 512GB


Return to “Hardware Support”

Who is online

Users browsing this forum: nycko and 5 guests